Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-AOC SUBASHNAGAR KANCHANPUR NORTH TRIPURA | KANCHANPUR | NORTH TRIPURA | TRIPURA | ₹3.5 L | L1 | Accepted-AOC QUOTED RATE STOOD 1STLOWEST |
| 2 | L2₹4.0 LRejected-Finance KANCHANPUR NORTH TRIPURA | KANCHANPUR | NORTH TRIPURA | TRIPURA | ₹4.0 L | L2 | Rejected-Finance QUOTED RATE HIGHER THAN 1ST LOWEST |
| 3 | L3₹4.1 LRejected-Finance | ₹4.1 L | L3 | Rejected-Finance QUOTED RATE HIGHER THAN 1ST LOWEST |
| 4 | L4₹4.6 LRejected-Finance DWS DIVISION DHARMANAGAR NORTH TRIPURA | NORTH TRIPURA | TRIPURA | 799250 | ₹4.6 L | L4 | Rejected-Finance QUOTED RATE HIGHER THAN 1ST LOWEST |
Tender Value
₹5.5 L
EMD Value
₹11,054
Closing Date
12 Jan 2026, 3:00 pmClosed
The Executive Engineer, DWS Division Kanchanpur
Office of the Executive Engineer, DWS Division Kanchanpur, North Tripura PIN _799270
SH-Re-modelling/shifting of Old GI/DI/UPVC pipeline from Suknacherra SB School to Satnala TSR Camp via Ganganagar (L- 5.21 Km) under Dasda RD Block area under DWS Sub-Division Dasda during the year 2025-26.
2026_CEDWS_68908_1
68/EE/DWS/KCP/2025-26
Open Tender
Civil Works - Water Works
30 days
Dasda
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
₹11,054
11 Mar 2026
6 Jan 2026
12 Jan 2026
6 Jan 2026
12 Jan 2026
6 Jan 2026
Charges for dismantling PVC / HDPE pipe after necessary excavation of earth including washing and stacking of pipes properly at site with all leads and lifts and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. complete as per specification & direction of the Engineer-in-charge.
90mm dia
110 mm dia
140 mm dia
Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm (slope-1 in 200)including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in -charge.
A) For UPVC pipes in new work
In all kinds of soil
For pipes not exceeding 90 mm dia
For pipes exceeding 90 mm dia but not exceeding 300 mm dia
B) For G.I. / C.I. / D.I. pipes in new work
In all kinds of soil
For pipes exceeding 90 mm dia but not exceeding 300 mm dia
Providing and laying S & S Centrifugally Cast ( Spun) Ductile Iron Class K-& Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in -charge.
100 mm dia Ductile Iron Class K-7 pipes
Charges for fixing and laying rigid UPVC pipes jointing with couplers, solvent cement including testing of joints complete ( excluding the cost of pipes, couplers, solvent cement which are to be issued from the department free of cost an specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in -charge.
90mm dia
110 mm dia
140 mm dia
Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge
90mm dia
110 mm dia
Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per CPWD specification and direction of the Engineer - in - charge.
100 mm dia
Charges for fixing C.I. sluice valves with cap complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.
100 mm dia.PN - 1.6
Providing and fixing U.P.V.C. service saddle as per CPWD specification and direction of the Engineer - in - charge.
90 mm dia with 15 mm dia opening
Providing and fixing G.I. union as per CPWD specification and direction of the Engineer - in - charge.
15 mm dia
Providing and fixing G.I. socket as per CPWD specification and direction of the Engineer - in - charge.
15 mm dia
Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
15 mm dia
Providing and laying of flexible PVC pipe(conforming to IS:7634) complete including earth work as per specification and direction of the E-I-C.( cost of fittings will be paid seperately).
i) 15 mm dia
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_70108.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.91 MB
DNIT68.pdf
Tender Documents • 4.69 MB
BOQ_70108.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid