GE I R AND D/CHD-29/2022-23

Amount

Taking down chowkhats or frames with shutter (without taking of shutter from the frames) n.exc 1.5 Sqm each complete all as specified and directed

All as per serial item No 1.00 above but exc 1.5 Sqm but n.ex 4 Sqm each

Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed

Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm each and refixing in same opening complete all as specified and directed

Supply and fixing for 105 x 60mm pressed steel door frames with one or more rebates, including necessary fittings hinges etc complete all as specified and directed

All as per serial item no 4.00 above but size 125 x 60mm

Supply and fixing for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze. Etc. Edges of framing plaint, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members specified in SSR Part I, Section 8, Clause 8.24 (a); supplied and fitted to chowkats

Supply and fixing for 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium densite, wood particle board with commercial face veneers fixed to chowkats

Supply and fixing for 200mm long Aluminium anodised barrel tower bolts.

Supply and fixing for 150mm size aluminium anodised door handles.

Material and labour for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

Material and labour for preparation of new wooden surface of any description n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer.

Supply and fixing for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed

Supply and fixing for solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Squaretube, fixed in opening as per specification & drawing

Factory made solid panel PVC door shutter 30mm thick (stype) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail & bottom rail on either side & as gap insert for top rais & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame wlded/sealed to the stiles & Rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification

Supply and fixing for 75mm butt hinges medium weight cold rolled mild steel.

Supply and fixing for 150 mm long Aluminium anodised barrel tower bolts.

Supply and fixing for 125mm size aluminium anodised door handles.

Material and labour for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

Supply and fixing for factory made ERW section window box type ( 'P' Section) with hinges, steel handle, peg stay, complete with glazing bars, dovetailed or welded (to receive glazeed or gauzed) complete all as specified and directed.

Supply and fixing for steel ventilator with top hung shutter including projecting type hinges, 3mm thick 100mm long copper oxidized finish mild steel handle and 3mm thick 300mm long mild steel copper oxidized finish peg stay with applying one shop coat of red oxide zinc chromate primer before fixing including taking down old unserviceable steel ventilators form existing position and making good disturbed surfaces of walls etc in all respect as per existing specifications all complete as specified and directed.

Supply and fixing for of mild steel work such as window guard bars and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed.

Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane.

Material and labour for 3mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

Material and labour preparation of new steel surfaces exc 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer

Taking down cement plaster of any description racking out joints hacking for key scrubbing down with water etc to receive plaster complete all as specified and directed.

Material and labour for internal plastering 10 mm thick on fair faces of brick or concrete surfaces, in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed .

Material and labour for external plaster15mm thick rendering on fair faces of brick wall or concrete surface in CM 1:4, surfaces finished even and fair with out using extra cement on walls, complete all as specified and directed .

Material and labour for 5mm thick rendering on fair faces of brick wall or concrete surface in CM 1:3, surfaces finished even and fair with out using extra cement on ceiling, chajjas, fasicas, soffits etc , complete all as specified and directed .

Material and labour for preparation of new plastered surfaces of walls including pilaster and cornices and applying two coats of oil emulsion distemper over a coat of primer including putty to wall surface etc complete all as specified and directed by Engr-in-Charge.

Material and labour for preparing old distempered surfaces of walls by washing rubbing down and stopping of distempered and painted surface and applying two coat of oil bound distemper on walls complete all as specified and directed .

Material and labour for preparation of new plastered surfaces of walls applying one coat of primer using necessary filling compound of white cement wall putty to obtain smooth regular/even finish using sand paper etc. complete all as specefied and applying two coats of smooth exterior acrylic emulsion paint (Apex Ultima) on new surface complete all as specefied and directed.

Material and labour complete removal of existing treatment from external surfaces of walls by wire brushes&stopping of surfaces & levelling/edging the disturbed places /edges using necessary filling compound of altek putty to obtain smooth regular/even finish using sand paper and applying two coats of exterior acrylic emulsion(Apex Ultima) over one coat of primer complete all as specefied and as directed.Note: The tint and shade shall be as approved by the GE. the treatment shall be carried out by the authorised applicator of the firm complete all as specefied and directed by E-in-Charge.

Material and labour for preparation of new plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of primer including putty to celing surface etc complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of plastered or unplastered old distempered surfaces of ceiling including pilasters and cornices and applying one coat of oil emulsion distemper (any tint) on ceiling complete all as specified and directed by Engr-in-charge. (Including of one coat wall putty wherever necessary to smoothen the surface complete all as specified and directed .

Demolition of brick work built in cement mortar

Material and labour for brick work with sub class B brick straight or curved on plan exc 6m mean radius bulit in CM 1:6

Demolition cement concrete unreinforced of any description above or below ground level

Dismantling floor/hearth or wall tiles including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed.

Material and labour for 50mm thick cement concrete type B-0 1:2:4 (using 12.5mm graded aggregate) as in floor complete complete all as specified and directed .

Material and labour for non - skid ceramic coloured tiles 7 to 8 mm thick, (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over and including screed bed 15mm thick in cement motar 1:6 complete all as specified and directed.

All as per serial item No 39.00 above but as in skirting over and including 15mm thick rendering in cement motar 1:4

Material and labour for ceramic tiles (coloured) 300x200x6-7mm thick on vertical surfaces set, jointed in neat cement slurry and pointed with white cement mixed with pigment to match over 15mm thick rendering CM 1:4 all as specified and directed

Material and labour for cement concrete in 75mm thick for plinth protection type C2 1:3:6 (40mm graded agg as fixed even and smooth without using extra cement)

Material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the sahde of the slab including rubbing and polishing complete over 20mm thick screed bed in CM 1:6 complete all as specified and directed

Material and labour for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm cement rendering in CM 1:4 and jointed with ditto as per item 13014 of SSR Pt II complete all as specified and directed

Dismantling of boarding, any description, fixed in any position with nails etc, complete all as specified and directed .

Material and labour for 18/19mm thick prelaminated particle board interior grade for cup board shutters complete all as specified and directed .

Material and labour for 2nd class hardwood plain fillets square, rectangular in section exc 13 Sqcm and n.exc 25 Sqcm as in frame work for cup board/shutters complete all as specified and directed .

Supply and fixing for 125mm brass handles cast type, polished bright, complete all as specified and directed .

Supply and fixing for 125mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed .

Supply and fixing for 125mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed .

Material and labour for M S continuous piano hinges as for cup board shutters all as specified with width of flat 30mm

Dismantling water tanks (Capacity 500 Ltrs) removing from site and supply & Fix rotational moulded polythenlyte water storage tank (Cylinderical vertical with closed top) capacity 500 Ltrs. Hoisted and fixed in position complete all as specified and directed .

Supply and fixing for in repair 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length CI brackets in lieu of old unservisable push button flushing system complete all as specified and directed .

Supply and fixing for WHB vitreous china (white) flat back of size 550x400mm fixed in repairs complete all as specified and directed .

Supply and fixing for repair vitreous china squating pane orissa pattern size 580x440mm white with internal footrest (excluding fixing bolts flushing cistern and flush pipe complete all as specified and directed .

Supply and fixing for repair 15mm bore long body fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply and fixing for repair cp stop valve, fancy type, 15mm bore, screwed down, high pressure with crutch handle, screwed both ends for iron pipe, etc complete all as specified and directed .

Supply and fixing for PVC Connection 450mm lengths including taking down old connection etc complete all as specified and directed .

Supply and fixing for repair cast copper alloy chromium plated Bib taps long body fancy type 15mm bore, with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed .

Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed .

Supply and fixing for 15mm bore tubes, medium grade, galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors complete all as specified and directed .

Supply and fixing for 20mm bore tubes, medium grade, galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors complete all as specified and directed .

Refixing 15mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)complete all as specified and directed .

Refixing 20mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed .

Supply and fixing in repair for brass chromium plated shower rose 125mm fixed in repair

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, head shoes, bends complete and removing from site complete all as specified and directed .

Material and labour PVC (SWR) pipe 110mm dia single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed .

Supply and fixing for in repair 20mm dia mild steel powder coating fancy type curtain rods including brackets and konbs etc complete all as specified and directed .

110mm bore PVC (SWR) junction single (Single T) equal or unequal

Supply and fixing for PVC (SWR) vent cowl for 75mm dia pipe

Material and labour for 75mm dia cast iron floor trap, with grating including jointing to waster pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed .

Dismantling of cast iron or reinfored concrete drain pipes upto 100mm internal dia jointed in cement mortar and taking out of trenches, if required complete all as specified and directed .

Material and labour for Cement concrete 1:3:6 type C2 concrete bed to drain pipes 100mm dia including packing under and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed .

Material and labour for 100mm internal diameter Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed .

Cutting into existing man holes for 100mm internal dia pipe making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required.

Supply and fixing for in repairs stainless steel sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wates; incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe over all size 495mm x 420mm x bowl size 410mm x 330mm x 160mm etc complete all as specified and directed .

Supply and fixing for in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Demolition of RCC of any description and in any postion not otherwise specifically provided for etc complete all as specified and directed .

Material and labour for formwork to chullah hoods, chajjas troughs and similar items including edges etc complete

Material and labour for formwork to sides and soffits of floor or roof beams, beam hauchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs and staircase etc splays between floors and beams etch

Material and labour RCC 1:2:4 type B0 (using 12.5mm graded aggregate ) as in chajjas etc complete all as specified and directed .

Material and labour for RCC 1:2:4 type B0 (using 12.5mm graded aggregate ) as in beams, cantilevers, bressummers, lintels etc complete all as specified and directed .

Material and labour for RCC 1:2:4 type B0 (using 12.5mm graded aggregate ) as in chullla hoods, stairways including steps etc complete all as specified and directed .

Material and labour for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips .Fe-410-W (Gde.E-250) Part- I quality-A or Fe 290 (Gde -E-165) etc complete all as specified and directed .

Material and labour for mild steel bars 8mm dia cut to lenth, bent to shape required, including cranking, bending, spirally for hooping for colums, hooking ends and binding with and including mild steel wire not less than 0.9mm dia complete all as specified and directed .

Dismantiling of brick tiles or terracing tiles single layer on roof & stacking serviceable tiles for use and disposal of unserviceable material off MOD premisescomplete all as specified and directed .

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part there of complete all as specified and directed .

Material and labour for PCC 1:2:4 for type B-1 using Providing, cement concrete in roof (20mm graded) kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed .

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm inlcludiing cleaning surface etc complete all as specified and directed .

Material and labour for screed bed 10 mm thick on fair faces of brick work or concrete surfaces of slab in cement mortar (1:4) and finished even and fair with using water proof compound @ 2% by weight of cement ccomplete all as specified and directed . Note: Water proofing compound shall be measured and paid for separately.

Supply only liquid water proofing compound

Material and labour for APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150gm/Sqm) laid on primed surfaces by forced application complete all as specified and directed .

Material and labour for preparation of old painted wood/wood base surfaces of any description not otherwise described over 10cm width and applying one coat of synthetic enamel paint (1st quality) complete all as specified and directed .

Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width and applying one coat of synthetic enamel paint (1st quality) complete all as specified and directed .

Supply and fixing for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete all as specified and directed .

Supply and fixing for ball valve brass 20mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

Supply and fixing for high density polyethylene (HDPE) 32mm pipe pressure seating 6 kgf/sq cm. etc complete all as specified and directed .

Supply and fixing for repair 32mm brass CP bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing,union and cap and fixed complete all as specified and directed .

Taking down existing copper/aluminum point wiring (light/ fan/ socket or power points) complete including (fittings such as switches, ceiling roses, pendents, regulators, sockets, Light fitting etc including wooden battens /casing /capping and conduit etc and making good disturbed surface of walls, ceilings and floors etc. ccomplete all as specified and directed .

Taking down carefully sub main wiring including all accessories without disturbing existing wiring fittings fixture site and making good to the disturbed surfaces all as directed and as specified in any type and size. complete all as specified and directed .

Point wiring with 1.5 Sqmm (nominal area) PVC (FRLS) insulated sheathed copper stranded conductor cable run in and including concealed in wall/floor PVC conduit not less than 20 mm as per IS with all fittings such as bends, tee,junction boxes of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 and as per existing colour of white wash / paint / OBD / cement base paint complete all as specified and directed. Note :- GI steel box and modular cover frame with plate shall deemed to be included in quoted rate against this item.

All as per serial item No 102.00 above but for one 3 pin 5 Amps socket outlet on independent board.

All as per serial item No 102.00 above but on same board.

All as per serial item No 102.00 above but for one light point controlled by two way switchs complete.

All as per serial item No 102.00 above but for 3 pin 15 Amp socket outlet independent with 2.5 Sqmm copper conductor complete.

Supply and fixing for wiring for circuit/ sub main wiring 2x6 Sqmm+1x6 Sqmm earth wire PVC (Antitermite ecofriendly FRLS) insulated copper conductor, single core, 1100 v grade cable in conceled/surface as required inciuding in PVC condute 25mm complete all as specified and directed by Engineer-In-Charge. (from VTPN to SPN 8 way DB)

Supply and fixing for modular switch one way 6 Amp,1 Module complete all as specified and directed.

Supply and fixing for modular socket, 6 amps-2/3 pin combined, 2 Module, complete all as specified and directed.

Supply and fixing for modular switch , one way, 16 amps, one Module of complete all as specified and directed.

Supply and fixing for modular socket 16 amps-6 pin multipin, 2 Module of complete all as specified and directed.

Supply and fixing for modular bell push 6 Amp,1 Module complete all as specified and directed.

Supply and fixing for modular switch 2 way 6 Amp,1 Module complete all as specified and directed.

Supply and fixing for Modular Fan regulator electronic step type 230 V 2 Module complete all as specified and directed. .

Supply and fixing for buzzer Ding Dong AC 230 Volts single pole. complete all as specified and directed.

Supply and fixing for Ceiling rose surface type, PVC/Polycarbonate isolated body size 50x28 mm two to three terminals complete all as specified and directed.

Supply and fixing for MCB’s single pole 6 to 32 Amps 240 volts 'B' curve complete all as specified and directed.

Supply and fixing for MCB SPN 32 Amps 240 volts 'B' curve complete all as specified and directed.

Supply and fixing for sheet metal enclosure for DBs when MCBs to be used single pole and neutral with acrylic door IP 43 protection, 240 volt with 200 amps rated bus bar bar 8 way of complete all as specified and directed. .

Supply and fixing for lamp holder insulated body with back plate for batten fitting complete all as specified and directed. .

Supply and fixing for surface and wall mounted LED Batten 10W light fitting with decorative end caps LED lighting fixture delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant acrylic diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation, energy efficient ready to use pack 10W LED complete with tube, & duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting to ceiling rose all as specified and directed

Supply and fixing for surface and wall mounted LED Batten 20/24W light fitting with decorative end caps LED lighting fixture delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant acrylic diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation, energy efficient ready to use pack 20/24W LED complete with tube, & duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting to ceiling rose completed all as specified and directed

Supply and fixing for surface mounted (Round) LED 18W downlighter with white powder coated aluminium die cast housing delivers high brightness & excillent illumination even in high ceiling areas with CRCA White powder coated provided for frosted heat resistant polycarbonate diffuser for glare free uniform light distribution powered by a separate electronic constant current driver with no UV & IR radiation, energy efficent surface mounted ready to use pack 18W LED, complete with connecting accesseries duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed

Supply and fixing for LED Bulk Head 10W -IP65 decorative oval bulk head edge LED lighting fixture comprising of pressure die cast housing with acrylic diffuser IP 65 protection, frosted heat resistant polycarbonate diffuser for glare free uniform light distribution powered by a inbuilt electronic constant current driver with no UV & IR radiation,energy efficent surface mounted ready to use pack 10W LED, complete with connecting accesseries duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed

Disconnect and insulate electric supply wire and taking down carefully ceilling fan 1200mm/exhaust fan 300mm of any make dismantlling blades, servicing opening up of fan, motor, cleaning stator , rotor, cleaning of all parts greasing oiling of bushes and bearing reassembling and testing for smooth functioning for celling fan/exhaust fan, including replacement of 0.5 sqmm 3 core copper conductor flexible cable connected from celling rose to fan complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core. all as specified and directed. (from existing main LT panel to VTPN DB)

Excavation in trenches in soft/loose soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables, Foundation filling of poles or stays etc completed all as specified and directed.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point.

Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required.

Material and labour for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable complete all as specified and directed. (Final thickness for payments to be measured 18cm only)

Sub class ‘B’ bricks old size. laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required.

Supply and fixing for 40mm dia bore galvanized iron tubing, light grade including all fitting for cable protection etc laid in floor or fixed to poles with clamps etc all as specified and directed.

Supply and fixing for MCCB TP ,Thermal magnatic adjustable type 100 A , 415 Volts,50 HZ, 16 KA with fixing arrangment in LT panel complete all as specified and as directed. (for existing LT panel O/g)

Supply and fixing for repairs sheet metal encloser distribution board 415volt,Vertical TPN 4 Way with provision for MCCB FP as incomer & MCBs as out going as per IS including compact insulated bus bar and rounded neutral bar, door earthing complete double door (Glazed) surface/reccess mounting IP-43 protection, , including connection with the existing sub circutis, electric meter etc with proper size new copper cable, lugs,connectors etc

Supply and fixing for repairs MCCB, 4-pole, breaking capacity 16 KA, 415 volts, 100 Amps including taking down unservicable one complete all as specified and as directed.(for VTPN I/c)

Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick,burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level,connected to galvanized iron wire of 4 mm dia earth lead by means of bolts,nuts ,washer and check nut of galvanized steel, earth wire protected by and including GI pipe 15 mm bore (light grade) and connected to main switch / MCB DBs box point as directed and including cement concret pit with CI cover 10 mm thick hinged to CI frame all as shown under electrical plate No 3 SSR Pt - I 2009 including painting the external surface of chamber & cover with enamel paint in diffrent colour as directed and writing earth results & date of test carried out with white paint on black painted background, wiremesh funnel, 20mm bore GI Pipe (Medium grade) for watering, charcoal and salt in alternative layers of 15cm thick all around the electrode (90cm x 90 cm), including necessary excavation and earth work in any type of soil complete all as shown in electrical plate of SSR part -I and testing on completion all as directed.

Excavation in post holes (or similar holes) each nexc 0.5 cum getting out in soft loose soil

Material and labour for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation of post holes complete all as specified and directed.

Supply and fixing for for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet or covered sheet 0.5mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. .

Material and labour for roof trusses framed trussed pulins crance rails and fastening and heavey brackets framing ( Beam tee, angle, channel, square/rectangular tubes or flat sections indl distance pieces, cleats etc Fe-410W (Gde E 250)

Material and labour for screw bolts (machine made) with hexagonal or square heads at one end and scrwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut but length of bolt exc 22.5cm and n exc 30 cm long and dia 11-15mm

KUNDRA CONSTRUCTIONS

D.N.Gupta and Sons

KUKREJA ENGINEERS

shree balaji builders

M/S MATLOOB AHMED