Construction of Watch Tower in Township at HAL Korwa.

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

Time Required for

(a) Conclusion of contract- 03month

(b) Completion of works- 12 Months

Sl. No. Particulars Amount In Rs. Reference

1 Term contract for civil maintenance works in township for repair & maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc and allied civil works required for completion of work.

a Civil Works #REF! [Annexure- D-1]

2 Add 5% towards contigencies #REF!

Grand Total #REF!

Say ` 14.07 Lakhs

Sr. Manager (Works ) ATA

(Satyendra K Maurya) (SK Chaudhury)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

1 SCHEDULE - "A" (PART-A) #REF!

2 SCHEDULE - "A" (PART-B) #REF!

Contingency @ 5% #REF!

Grand total #REF!

SAY : 14.07 Lakhs

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Name of Work:- Construction of Watch Tower in Township at HAL Korwa.

NIT No.- HAL/KWD/Civil/15 of 25-26

Note:- Tenderers are requested to quote their offer in percentage either above or below on CPWD DSR-2023 Volume I & II (Rates). All relevant items shall be executed as per CPWD specifications and CPWD DSR 2023, materials specifications shall be as mentioned in the Bill of quantities and as per the List of approved make/brand as provided in tender document and as per the direction of Engineer-in-charge.

NAME OF AGENCY (To be filled in highlighted box ) :

Sl. No. Description of item Qty. Unit Rate derived excluding GST @18% and BOCW @1% Amount excluding GST @18% and BOCW @1% in (Rs.)

PART-A- CIVIL ITEMS

1(a) Clearing jungle including uprooting of rank vegetation, grass, brush wood, jungle trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared all complete as per specification and direction of E.I.C. 276.00 Sqm 14.93 4120.68

1(b) Earthwork Excavation in foundation trenches, column footing in all soils except hard rock up to 1.50 mt. depth getting out, returning, filling in sides of foundations, floors, roads, berms, embankments, etc, including spreading, levelling, well ramming, in 20 cm layers and removal of surplus soil not exceeding 150 m lead and deposited where directed, all complete as per specification and direction of E.I.C. 63.00 Cum 220.77 13908.51

2 Providing & laying PCC: 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, under floors or any other similar description of works, with mechanical / manual mixing including necessary side shuttering, compaction, curing ,materials, labour, T&P etc, required for proper completion of the work as per specification and direction of EIC. 19.00 Cum 5777.61 109774.59

3 Dismantling of brick work in cement mortar by manually / mechanical means including all labour, tools and plants, removal / disposal of dismantled rubbish, debris at directed place and useable dismantled material to civil maintenance Township store or as directed by EIC, all complete with cost of transportation, loading , unloading, cleaning the area etc, all complete as per specification and direction of E.I.C 0.50 Cum 1747.36 873.68

4(a) Providing, fabricating, fixing and removing, Form work / shuttering of side of Foundations, footings, bases of columns, etc. for mass concrete with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, with working scaffoldings, ladders, gangways, use & wastage of timber, removal of formwork & shuttering after the stripping period etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 45.00 Sqm 332.60 14967.00

4(b) Providing, fabricating, fixing and removing, Form work / shuttering of side of Lintels, beams, plinth beams, girders, bressumers and cantilevers with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs, all braces, struts, balli, etc,with working scaffoldings,ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 167.00 Sqm 624.58 104304.86

4(C ) Providing, fabricating, fixing and removing, Form work / shuttering of side of Columns, Pillars, Piers, Abutments, Posts and Struts with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, with working scaffoldings,ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 194.00 Sqm 815.33 158174.02

4(d) Providing, fabricating, fixing and removing, Form work / shuttering of Suspended floors, roofs, landings, balconies and access platform Suspended floors, roofs, landings, balconies and access platform with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, with working scaffoldings,ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 535.00 Sqm 786.45 420750.75

5(a) Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-Ill} derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) including making construction & longitudinal joints (10mm wide x 50mm deep) by groove cutting machine and expansion joints. All work up to plinth level, excluding the cost of centering, shuttering, finishing and reinforcement, all complete with labour, material, T&P etc. as per specification and direction of E.I.C 34.00 Cum 7672.16 260853.44

5(b) Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-Ill} derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). All work above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement all complete with labour, material, T&P etc. as per specification and direction of E.I.C 67.00 Cum 9204.94 616730.98

5(C) Providing and filled in expansion, construction joints of RCC roads / CC pavements (10mm wide x 50mm deep) with Sealing compound of Grade 'A' of approved brand like Shalimar or any approved reputed make ISI mark including making the joints dust free with high pressure air jet cleaners, labour, material, cartage, T&P, wastage etc all completeas per specification and direction of E.I.C. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) 48.00 RM 22.48 1079.04

6 Providing, fixing and laying TMT reinforcement bars for any diameter of TATA / SAIL/ RINL/ Kamdhanu or any other approved make for all type of R.C.C works including straighting, cut to length, bend to shape required, cranking, bending spirally or hooping, spacers / chairs, wastages and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it (RCC) also including cost of all labour, material, T&P etc. all complete at all height as per drawing, specification and direction of E.I.C 10104.00 Kg 91.47 924212.88

7(a) Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:6 ( 1 cement : 6 coarse sand) in foundation and in foundation and plinth, for walls, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 7.00 Cum 6049.23 42344.61

7(b) Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 ( 1 cement : 6 coarse sand) for walls including necessary cutting of bricks as required , wastages, straight or curved, including cost of all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 28.00 Cum 7723.22 216250.16

8 (a) Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. 1600.00 Kg 110.68 177088.00

8 (b) Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 Band K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings, glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 368.00 Kg 111.15 40903.20

8 (C) Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of “L” shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. 86.00 Sqm 765.50 65833.00

9(a) Providing, rendering, dubbing out cement plastering 12 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls, darins, manholes, ducts etc of rough / fair faces of brick wall / concerete surface including plaster at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC 966.00 Sqm 291.47 281560.02

9(b) Providing ,rendering, screeding, dubbing out cement plaster 12 mm thick on ceilings at any depth/height in cement mortar 1:4 (1 cement: 4 Coarse sand )on brick or concrete surfaces of any description fair/rough side ,finishing fair or trowelled to a smooth & even finish without using extra cement including scaffolding ,labour, material, curing, T&P etc. all complete as per specification and direction of EIC. 216.00 Sqm 303.09 65467.44

9(C) Providing, rendering, dubbing out cement plastering 20mm thick average with cement mortar 1:3 (1 cement: 3 coarse sand) surface finished even and smooth using extra cement (Neat cement) at any height on roofs, sun shed, walls, etc. of rough / fair faces of brick wall/ concrete surface including chamfering/ rounding the joints and corners, sweeping, cleaning and washing down with water to remove dust, proper gradient , water proofing compound shall be admixed @ 2% weight of cement or liquid water proofing chemical of Dr. Fixit / SICO or any other approved brand and as per Manufacturer instructions, for roofs finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm false square panels etc. all labour, material, scaffolding, curing, wastage, T&P etc. all complete as per specification and direction of EIC. 104.00 Sqm 503.14 52326.56

10(a) Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer as Birla, JK, Asian or as approved by EIC over the plastered wall surface to prepare the surface even and smooth complete including scaffolding ,labour, material, T&P etc. all complete as per specification and direction of EIC. 1182.00 Sqm 132.35 156437.70

10(b) Providing and finishing walls with Acrylic Smooth exterior paint of required shade make like apex of Asian /weather coat long life of Berger/weather shield max of ICI for New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) etc including preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding all complete as per specification & direction of EIC. 1090.00 Sqm 136.21 148468.90

10(C) Providing and applying two coats of 1st quality acrylic distemper of approved manufacturer and of required shade and colour all complete to achieve even shade and colour of approved brand and shade such as Asian/Berger etc. on wall / ceiling including water thinnable priming coat with cement primer, surface preparation, removing of nails, filling holes / minor pits , cracks with Birala putty wherever required etc., spreading & removing covering to doors, windows, floors, fittings etc. to protect them from splashes, removing & replacing furniture, movable cupboards, blinds etc., washing floors, cleaning glass, joinery etc. of drops and splashes & leaving premises clean and tidy with all labour, material, wastage, scaffolding , all protective measures, T&P, cartage etc all complete as per specification and direction of EIC. 128.00 Sqm 158.79 20325.12

10(d) Providing & applying two coats of super synthetic enamel painting on wood / steel / wall surface over a coat of wood/ steel/ wall primer for any description of works of approved shade, make Asian / Berger / ICI of fisrt quality including preparation of surface with Putty filling in cracks, holes etc wherever required, at any height / depth or any descripiton of works at all floors including all labour, material, T&P, scaffolding all complete as per specification and direction of E.I.C. 222.00 Sqm 87.19 19356.18

11(a) Providing and fixing to door frame (MS/ Wooden) flush door shutter 30 mm thick (Single / double leaf) phenol formaldehyde bonded, core of block board construction with frame of hard wood all round lipping, commerical ply on both faces of shutters of Gee doors/Kit ply/ Swastik or other approved make, ISI mark as approved all complete as per drawings & specification also provisions for door fittings, making holes/ cutting for fixing fittings, making good including 4 nos for each leaf Stainless Steel butt hinges with necessary screws labour, material, T&P, cartage, wastage etc all complete as per direction of EIC. 8.00 Sqm 2686.90 21495.20

11(b) Providing and fixing anodised aluminium sliding door bolt 250x16 mm of apporved make such as classic, shivalik, diamond or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC. 8.00 Nos. 221.03 1768.24

11(c) Providing and fixing Tower bolt anodised Aluminium 200mm long of apporved make such as classic, shivalik, diamond or any other approved make as per specification and direction of EIC. 4.00 Nos. 84.56 338.24

11(d) Providing & fixing anodized Aluminium handle 125 mm grip length of apporved make with necessary screws, such as classic, shivalik, diamond or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC. 8.00 Nos. 56.19 449.52

11(e) Providing & fixing 4.0 mm thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with labour, material, T&P, wastage etc. as per specification and direction of EIC. 18.00 Sqm 902.98 16253.64

12(a) Providing & fixing 100/ 110 mm dia PVC (SWR) pipe of approved make such as Supreme, Diplast , kishan or equivalent fixed to walls including necessary required fittings such as reducer , collars, MS clamps etc and adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 72.00 RM 320.09 23046.48

12(b) Providing & fixing 100/ 110 mm dia PVC (SWR) bends of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 8.00 Nos. 127.52 1020.16

12(C) Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete including all material, labour, T&P, curing, wastage etc. as per specification and direction of EIC. 4.00 Nos. 252.96 1011.84

Electrical works Part -(B) -

1 Supply and making light point/ fan point/ exhaust fan point/ call bell point wiring with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Anchor/Havells/L&T/Legrand/GM/ABB make on the same board , making connection & testing complete in all respect. 32.00 Nos. 1136.42 36365.44

2 Supply and making group controlled (looped) light point/fan point/exhaust fan point/ call bell point wiring (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Anchor/Havells /L&T/Legrand/ GM/ABB make on the same board (Item No. 1), making connection & testing complete in all respect. (Secondary light point) 16.00 Nos. 583.31 9332.96

3 Supply and making Fan point Wiring with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Anchor/Havells/L&T/Legrand/GM/ABB make on the same board (Item No.1), making connection & testing complete in all respect. 4.00 Nos. 1201.49 4805.96

4 Supply & fixing of 5/6 Amp modular multi socket (3/5 pin) - 01 No. & 5/6 Amp modular switch - 01 No., Anchor/Havells/L&T/Legrand/GM/ABB make on the same board (Item No. 1), making connection & testing complete in all respect. 4.00 Nos. 369.51 1478.04

5 Power Point - Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, Anchor/Havells/ L&T /Legrand/GM/ABB make, connections etc. as required, making connection & testing complete in all respect as per direction of EIC. 8.00 Nos. 453.95 3631.60

6 Supply and laying sub main wiring with FRLS PVC insulated multistrand copper wire of size of 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (ISI marked) make Havells/Anchor/National/ Polycab/Gloster /Finolex/Kei/ RR Kabel/Cap cab in appropriate size of medium class, PVC conduit(ISI marked), concealed in wall by cutting, plastering, matching painting/on wall surface(as required) with all accessories such as bends, Junction boxes, junction box cover (laminated sheet), inpection boxes, socket, lock nut etc. from TPN DB to Power point and sub main wiring, making connection, testing as per direction of EIC. (Note: Color code for Phase wire: Red/Yellow/Blue, Neutral: Black & Earth: Green) 80.00 Meter 213.04 17043.20

7 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required, Anchor/Havells/L&T/Legrand/GM/ABB make for instant water heater power connection, concealed/on wall surface, making connection and testing, complete in all respect as per direction of EIC. 4.00 Nos. 563.18 2252.72

8 Supply and laying sub main wiring with FRLS PVC insulated multistrand copper wire of size of 2X4 sqmm.+ 1X4 sqmm. earth wire (ISI marked) make Havells/Anchor/National/Polycab/Gloster/Finolex/Kei/RR Kabel/Cap cab in appropriate size of medium class, PVC conduit(ISI marked), concealed in wall by cutting, plastering, matching painting/on wall surface(as required) with all accessories such as bends, Junction boxes, junction box cover (laminated sheet), inpection boxes, socket, lock nut etc. from SPN DB to AC point and making connection, testing as per direction of EIC.(Note: Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green) 45.00 Meter 441.55 19869.75

9 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Make Havells/Anchor/ National/Polycab/ Gloster/ Finolex/ Kei/ RR Kabel/Cap cab in appropriate size of medium class, PVC conduit(ISI marked), concealed in wall by cutting, plastering, matching painting/on wall surface(as required) with all accessories such as bends, Junction boxes, junction box cover (laminated sheet), inpection boxes, socket, lock nut etc. or in existing conduit(as per site) with Supply & fixing, making connection & testing complete in all respect as per direction of EIC.(Note: Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green) 12.00 Nos. 1210.01 14520.12

10 Supplying and fixing PVC batten/ angle holder including connections etc. as required, make Crompton/Surya/Havells/Philips/C&S/Bajaj/Syska on wall, connection & testing, complete in all respect as per EIC. 24.00 Nos. 85.21 2045.04

11 Supplying and fixing(in place and after removal of existing DB) of 4 way (4 + 12), Double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs with MCCB and MCBs (Make: Legrand /Havells /L&T /C&S Electric/ Hager/ Schneider/ABB/ Anchor/Indoasian/Eaton) as given below: a) MCCB TP 100Amp,16KA - 1No. b) MCB 'C' Curve TP 32Amp - 1 Nos. c) MCB 'C' Curve SP 32Amp - 3 Nos. d) MCB 'C' Curve SP 25Amp - 2 Nos. e) MCB 'C' Curve SP 10Amp - 2 Nos. f) Blanking cover - 4 Nos. 4.00 Nos. 12048.20 48192.80

12 Laying of 3.5CX35 sqmm size of cable, aluminium conductor, XLPE insulated, PVC sheathed, steel armoured 1100 volts grade power distribution cable conforming to IS7098 part I 1988, direct in ground including excavation, sand cushioning, including road/ drainage system/ walkway crossing, protective covering and refilling the trench etc as required, make Gloster/Havells/National cables/Polycab/TESCAB in the metal pipe as per standard code of practice as per direction of EIC. (Note - Only Cable will be Supplied by HAL) 880.00 Meter 299.79 263815.20

13 Supply, making & testing end termination of 3.5CX35 sqmm size 1100 V grade XLPE insulated and PVC sheathed steel armoured Aluminium conductor cable with brass compression gland, Al. lug etc. as per direction of EIC. 8.00 Nos. 285.84 2286.72

14 Supply, making & testing of earth pit for earthing as per IS standard the job involves digging of pit up to 4.5 meter deep, supply & fixing of GI pipe 40mm dia (Internal) 4.5mtrs long, class B, make Jindal/TATA/Oswal, wooden charcoal/coke & salt (as required) suitable GI reducer, GI nipple, CI funnel for watering, CI hinged Chamber cover with frame size 12" X 12" etc and perforation from bottom, making of Earth Chamber and S&F of earth resistance identification marker with MS angular channel of thickness 5 mm of size 40 mmx40mm of length 450mm. the channel shall be grouted approximately in 300 mm x 300mm x300mm depth of which 150 mm will be below the ground cement concrete pedestal work with 350 mm channel above the ground length just next to earthing pit as per direction of EIC. 4.00 Nos. 5310.26 21241.04

15 Supply, laying of 25mm x 5mm GI strip at 0.5 meter below ground as strip earth electrode including connection/terminating with GI nut-bolt-spring washers etc.complete as required (jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm) as per instructions of engineer in charge. 80.00 Meter 86.42 6913.60

Total 4435288.83

Contractor shall quote only numerical value of percentage either Above or Below in highlighted Cell on Total Above % 0.00

Sub Total 4435288.83

Add BOCW @1% 44352.89

Total Quoted value including GST @18% & BOCW @1% 5277993.71

Annexure-D (Para 4.6.4)

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2023-24. (For One years)

Time Required for

(a) Conclusion of Contract - 03 months

(b) Completion of works- 12 months

Sl. No. Particulars Amount in Rs. Reference

1 Term contract for civil maintennace works in Township for repair and maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc. and allied civil works required for completion of work.

(a) Civil Works (Paer: A+Part: B) #REF! [Annexure-D-1]

Grand Total #REF!

Say Rs. #REF! Lakhs

Manager (Works) ATA

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 166.94 3.3388 167 3.34 150 3.00 208.675 125.205 4.1735

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 176.69 14.1352 198 15.84 190 15.20 220.8625 132.5175 17.669

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 166.94 1.6694 181 1.81 160 1.60 208.675 125.205 2.08675

Rebate offered (in %age) if any 2.00

Status of Parties L-2 L-1 9.380172329

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

SCHEDULE - 'A' Part 'B'

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil/21 of 2013-14

PART 'B' NON MES ITEMS

S.N Description of Items Qty. Unit As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (2/2) Freak Rate

Rate in figure ( Rs.) Rate in words ( Rs.) Amount in ( Rs.) Rate (In Rs.) Amount Rate (In Rs.) Amount

1 Supply and stacking of coarse sand such as Banda/ Chopan including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 65.00 Cum 1970.00 #NAME? 128050.00 2600.00 169000.00 2300.00 149500.00 - 2462.50 1477.50 56.62514156 70.76139258 65.34090909

2 Supply and stacking of Ist class bricks class 'A' at directed place inside Factory or Township area including all labour, material, transportation, loading, unloading, wastage , T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 2000.00 Nos 8.00 #NAME? 16000.00 7.50 15000.00 7.00 14000.00 - 10.00 6.00

3 Supply and stacking of 12.5 mm graded stone aggregate of bharatkoop/ Dala quarry including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 10.00 Cum 2408.00 #NAME? 24080.00 2400.00 24000.00 2500.00 25000.00 - 3010.00 1806.00

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 154 3.08 167 3.34 165 3.30 192.5 115.5 3.85

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 163 13.04 198 15.84 200 16.00 203.75 122.25 16.3

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 154 1.54 181 1.81 180 0.00 192.5 115.5 1.925

Rebate offered (in %age) if any 2.00

Total Amount (Part-B) 168130.00 208000.00 188500.00

Total Amount (Part A+Part B) 0.00 1268130.00 1557858.16 1373606.38

Status of Parties L-2 L-1

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

Hindustan Aeronautics Limited

(Avionics Division, Korwa)

DEPARTMENT OF CIVIL ENGINEERING

CHECK LIST FOR SUBMITTING E-TENDER

NAME OF WORK:- Construction of Watch Tower in Township at HAL Korwa.

NIT No.- HAL/KWD/Civil/15 of 25-26 Date: 31.07.2025

Name of Contractor:

S. N. Essential Criteria /Desirable criteria. Please write submitted or not submitted below

1 ANNUAL TURN OVER: -Average Annual Turnover during the last 3 years, ending 31st March-2025 (Provisional certificate is acceptable) of previous financial year, should be at least 30% of the approximate estimated amount put to tender. The Bidder should upload profit & loss statement for the last three years duly certified by Chartered accountant with UDIN. (Supported with Income Tax return, Balance Sheet etc.).

2 EMD (As per NIT)

3 Latest solvency certificate from any nationalized or scheduled bank i.e.minimum 40% of Estimated value.

4 EXPERIENCE: Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following.

5 Three similar completed works each costing not less than the amount equal to 40% of the approx estimated amount. OR

i) Two similar completed works each costing not less than the amount equal to 50% of the approx estimated amount. OR

ii) One similar completed work costing not less than the amount equal to 80% of the approx estimated amount.

6 Registration certificate with Government department and Government undertaking, if any.

7 Proof of GST registration

8 Copy of PAN/ GIR No. Registration Certificate issued by Income Tax Authority.

9 Constitution and legal status.( Partnership/ Proprietary)

10 Details of Bank name , brance code, address, IFS code and Account number on letter head.Please attach scanned copy of blank cheque for reference.

11 The rate quoted shall be inclusive of all taxes. Tenderers are required to make the DATA ENTRY of the item rate in figures only and rate in words will be automatically generated.

12 Tenderers are required to attach Format of undertaking as per Annexure 1& 2

13 Signature done, wherever required.