REPAIR/POLISHING/PAINTING OF CERTAIN WOODEN AND STEEL FURNITURE AT SAA UNDER GE (S) TEZPUR

Amount

Chair writing FD-20,202,250 & 280- Removing of the following old broken/Unserviceable parts from chair writing and Supply and Fixing new parts made out of well seasoned Ist class hard wood Teak made to shape and size as per drg duly polished complete all as specified and shown on drg and as directed by Engineer-in-charge.

Front leg single for Chair writing

Rear leg single for Chair writing

Front rail

Rear rail

Side rail

Stiffener 'H' type

Top Rails

Chair Dining FD-16,203,228 & 279 Removing of the following old broken/Unserviceable parts from chair Dining and Supply and Fixing new parts made out of well easoned Ist class hard wood Teak made to shape and size as per drg duly polished complete all as specified and shown on drg and as directed by Engineer-in-charge.

Front leg single for Chair Dining

Rear leg single for Chair Dining

Front rail

Rear rail

Side rail

Stiffener 'H' type for Chair Dining

Back Rest stiffener for Chair Dining

S & F Corner between leg and rail 75mmx25mm

Chair Easy FD-17,201 & 229 -Removing of the following old broken/Unserviceable parts from chair Easy and Supply and Fixing new parts made out of well seasoned Ist class hard wood Teak made to shape and size as per drg duly polished complete all as specified and shown on drg and as directed by Engineer-in-charge.

Front leg single for Chair Easy

Rear leg single for Chair Easy

Arms for Chair Easy

Front rail of seat frame

Rear rail of seat Frame

Side rail of seat frame

Side rail of back frame

Lower Rail of back frame

Uper Rail of back frame

Chair all type- Recanning of chairs CBA/CBB wooden chair, bin soiled linen, chair easy, chair dinning, chair writing etc with 2mm wide new plastic cane and 0.4mm thick cream/white half round seat and back and border to be covered with 3 to 4 mm wide ½ round cane and tightening of frame before caning complete all as specified and shown in drawing. Make : Premium/Swastic/Shah

Chair Dining MAP FD/E6/MAP/04- Removing of the following old broken/Unserviceable parts from chair Dining MAP and Supply and Fixing new parts made out of well seasoned Ist class hard wood Teak made to shape and size as per drg duly polished complete all as specified and shown on drg and as directed by Engineer-in-charge.

Front leg single

Rear leg single

Front rail of Seats

Rear rail of Seats

Side rail of Seats

Stiffener 'H' type

Back Rest stiffener

S&F Corner between leg and rail 75mmx25mm

Taking out old U/S seat and S & F new seat shall be 75 mm thick 32 density foam covered with leathrite foam fitted on plywood for seat 12mm thick BWR, raxine of approved quality and colour on seat of chair Dining work should be done exactly as per existing shape and size,including tightening of frame with bamboo pins,screw wood ss before fixing of seat. Rest all as per drg and directed by Engr-in-charge.Note - Cost of raxine not less then Rs 250/- per mtrs.

SS Food hot Trolley,MES Patt/TP:-

Removing of old broken unserviceable parts of SS trolley and S&F of new items of reputed brand in place of old as per the requirement and as directed by the Engineer-in-Charge

SS Food hot Trolley,MES Patt/TP:-S&F of electric element rode/immersion rode 1000 v single phase of wwarming up food trolley and change of socket or as per directive of engineer-in-charge..

SS Food hot Trolley,MES Patt/TP Repairing/welding/Gas welding of legs

Sofa Set 5 Seater and 4 Seater FD-281 -Removing of the following old broken/Unserviceable parts from Sofa 5 Seater & 4 Seater and Supply and Fixing new parts made out of Ist class hard wood teak well seasoned made to shape and size as per drg duly polished complet all as specified and shown on drg and as directed by Engineer-in-charge.

Front leg single

Rear leg single

Batten

Front Long Rail of 3 Seater Seat frame

Rear Long Rail of 3 Seater Seat frame

Upper Long Rail of 3 seater back frame

Lower long Rail of 3 seater back frame

Side Rail of seat frame 3 seater and single seater

Side Rail of Back frmae 3 seater and single seater

Front Rail of single seater Seat frame

Rear Rail of single seater seat frame

Upper Rail of Single seater back frame

Lower Rail of single seater back frame

Replacing of existing old cushion foam size 22”x21”x4” from seat and back of Sofa set and supply and fixing of new cushion foam 22”x21”x4” (U Foam) 32 density of sleep well OR Godrej PURITO or ,kurlon & covered with cloth tapestry as per sample approved by GE (Cost of tapestry cloth not less than Rs 325/- per meters). The tapestry cushione cover shall have zip arrangement to accomodate the cushion. All as specified and directed by Engineer-in-charge.

Removing unsv Tapestry cloth cover and M&L for new Tapestry cloth cover of approved quality with zip for sofa seat (or) back as per drawing and as approved by GE Cloth shall be of approved quality and cost not less than 325.00 per meter complete all as specified and directed.

Bed Plywood Top FD-213,245,246 & 247 - repairing the following parts

Removing of old U/S Existing ply wood top from Bed Ply Wood Top and S & F of new top 12 mm thick ply wood commercial face BWR Grade of same shape and size rest all as per Drg and as Directed by Engr-in-Charge.

Removing of old U/S teak face ply wood 4 mm thick from Head Board and S & F new 4 mm thick one side teak face on both side of Head Board with 4 mm thick teak wood beading around the head board after repairing the complete head board. Rest all as per drg and as directed by Engr-in-Charge.

All as per above But Foot board single for bed

All as per above but Leg single for bed

All as per above Long rail single for bed

Table Dressing Ladies FD-32,251 & 378 - repairing the following parts

taking down old top of table and provide new one made of 18mm thick prelaminated particle board exterior grade, both side laminated Rest all as specified in the drg and as directed by Engineer-in-charge.

New 5 mm thick mirror of Make : Atul/Modigaurd with New Teak wood frame & 6mm thick plywood commercial type.

Taking down old drawerand provide new drawer with front of 18mm thick prelaminated particle board, exterior grade, both side laminated , back and sides of 12mm thick teak wood planks and bottom with 6mm thick plywood commercial grade Rest all as specified in the drg and as directed by Engineer-in-charge.

Removing of U/S knob and S&F new knob best quality as per drg and directed by Engr-in-charge .

Takind down old leg and provide new Leg single

M&L for removing UNSV Glass sliding shutter with aluminium channel from table and S&F new Glass shutter made out of 5mm thick glass plain with aluminium channel 20 mm width two way. Rest all as specified in the drg and as directed by Engineer-in-charge.

Taking down old back and provide New 12mm thick back ply BWR Gde Plywood.

Table Dressing Gents -FD-31 & 230-

Removing of the old broken/Unserviceable top from Table Dressing Gents with Mirror and Supply and Fixing New top made of 18mm thick prelaminated particle board exterior grade, both side laminated Rest all as specified in the drg and as directed by Engineer-in-charge.

Removing of the old broken/Unserviceable mirror from Table Dressing Gents with Mirror and Supply and FixingNew 5 mm thick mirror of Make : Atul/Modigaurd with New Teak wood frame & 6mm thick plywood commercial type at back as per drg and as directed by Engineer-in-charge.

Removing of the old broken/Unserviceable drawer from Table Dressing Gents with Mirror and Supply and Fixing New drawer with front of 18mm thick prelaminated particle board, exterior grade, both side laminated , back and sides of 12mm thick teak wood planks and bottom with 6mm thick plywood commercial grade Rest all as specified in the drg and as directed by Engineer-in-charge.

Removing of the old broken/Unserviceable knob from Table Dressing Gents with Mirror and Supply and FixingNew knob of best quality as per drg and directed by Engineer-in-charge.

Removing of the old broken/Unserviceable back ply from Table Dressing Gents with Mirror and Supply and FixingNew 12mm thick back ply, BWR Gde Plywood.

Table Centre FD-29,235 & 274

Removing of the old broken/Unserviceable top table center and S and F New Top of table centre made out of 18mm thick prelaminated particle board exterior grade both side laminated and providing with 4 mm thick teak wood beading duly polished all round the top complete,including tightening of frame with bamboo pins,screw wood ss before fixing of top. all as shown in drg and directed by Engr-in-Charge Make- Eco board/Archid/Bhutan Board Green Ply

Legs single for table centre

Short rail single for table centre

Long rail single for table centre

Stiffener single for table centre

Table 3'x2' with and without drawer FD-41,224,231,283 & 284- Removing of the following old broken/Unserviceable parts from Table 3'x2' with and without dr and Supply and Fixing new parts made out of Ist class hard wood Teak well seasoned made to shape and size as per drg duly polished complet all as specified and shown on drg and as directed by Engineer-in-charge.

Removing of the old broken/Unserviceable top from Table 3'x2' and Supply and Fixing New top made of 18mm thick prelaminated particle board exterior grade, both side laminated Rest all as specified in the drg and as directed by Engineer-in-charge.

Legs single

Short rail single

Long rail single

Removing of the old broken/Unserviceable drawer from Table 3'x2' and Supply and Fixing New drawer with front of 18mm thick prelaminated particle board, exterior grade, both side laminated , back and sides of 12mm thick teak wood planks and bottom with 6mm thick plywood commercial grade Rest all as specified in the drg and as directed by Engineer-in-charge.

Removing of U/S knob and S&F new knob best quality as per drg and directed by Engr-in-charge .

Table Peg -FD-46,236 & 277- Removing of the following old broken/Unserviceable parts from Table Peg and Supply and Fixing new parts made out of Ist class hard wood Teak well seasoned made to shape and size as per drg duly polished complet all as specified and shown on drg and as directed by Engineer-in-charge.

Removing of the old broken/Unserviceable top from table peg and Supply and Fixing New Top of table centre made out of 18mm thick prelaminated particle board exterior grade both side laminated and providing with 4 mm thick teak wood beading duly polished all round the top,including tightening of frame with bamboo pins,screw wood ss before fixing of Top. Complete all as shown in drg and directed by Engr-in-Charge.

Legs for peg table

Side rail for peg table

Stiffener.

S&F Corrner of 50x50x25mm

Table Writing FD-249 & 275-

Removing of the old broken/Unserviceable top from Table writing and Supply and Fixing New Top of table Writing made out of 18mm thick prelaminated particle board exterior grade both side laminated and providing with 4 mm thick teak wood beading duly polished all round the top,including tightening of frame with bamboo pins,screw wood ss before fixing of Top. Complete all as shown in drg and directed by Engr-in-Charge.

Taking out old U/S door of cup boards table writing and S&F new door made of 18mm thick prelaminated particle board exterior grade both side laminated and providing with 4mm thick teak wood beading dully polished all round and piyano type hinges compete all as shown in drg.

Taking out old U/S Side of cup boards table writing and S&F new sides made of 18mm thick prelaminated particle board exterior grade both side laminated compete all as shown in drg.

Removing of the old broken/Unserviceable back ply from table writing and Supply and Fixing Back ply of 6mm thick ply commercial BWR Grade as per drg.

Stiffener single

single Legs for table writing

Removing of the old broken/Unserviceable drawer from Table writing and S and F New drawer with front of 18mm thick prelaminated particle board, exterior grade, both side laminated , back and sides of 12mm thick teak wood planks and bottom with 6mm thick plywood commercial grade Rest all as specified in the drg and as directed by Engineer-in-charge.

Removing of OLD U/S knob and S&F new knob best quality as per drg and directed by Engineer-in-charge.

single Long Rail

single Short Rail

Teapoy - FD-232 & 284 -

Removing of the old broken/Unserviceable top from Teapoy and S and F New Top of teapoy made out of 18mm thick Block Board with lamination with sunmaika with teak wood shade and providing with 4 mm thick teak wood beading duly polished all round the top,including tightening of frame with bamboo pins,screw wood ss before fixing of top. Complete all as shown in drg and directed by Engr-in-Charge.

Leg for teapoy

Long rail for teapoy

Short rail for teapoy

Stiffner 'H' Type

Table Dining 6/8 Pers FD-46,236 & 277- Removing of the following old broken/Unserviceable parts from Table Dining 6/8 Pers and Supply and Fixing new parts made out of Ist class hard wood Teak well seasoned made to shape and size as per drg duly polished complet all as specified and shown on drg and as directed by Engineer-in-charge.

Removing of the old broken/Unserviceable top from Table Dining 6/8 per and S and F New Top of Table dining 6/8 pers made out of 18mm thick prelaminated particle board exterior grade both side laminated and providing with 4 mm thick teak wood beading duly polushed all round the top ,including tightening of frame with bamboo pins,screw wood ss before fixing of top.Complete all as shown in drg and directed by Engr-in-Charge.

Legs single

Long rail single

Short rail single

S& F Corrner of 100x100x25mm

Side Board / Bin soiled linen multipurpose (FD/E6/MAP/09, FD-26,241 & 371

Taking out old U/S front single door of side board and S&F new door made of 18mm thick prelaminated particle board, exterior gade, one side teak face and white laminated on other side and providing 4mm thick teak wood beading all-round the top all as specified on drawing and directed.

Taking out old U/S side of side board and S&F new side made of 18mm thick prelaminated particle board, exterior grade, one side teak face and white laminated on other side complete all as specified on drawing and directed.

Taking out old U/S back portion ply of side board and S&F of new ply 6mm thick, BWR grade, commercial all as specified on drawing and directed.

Taking out old U/S top board of side board and S&F new top board made of 18mm thick prelaminated particle board, exterior gade, one side teak face and white laminated on other side and providing 3mm thick awood beading all-round the top all as specified on drawing and directed.

Taking out old U/S bottom portion board of side board and S&F of new bottom board made of 18mm thick, prelaminated prarticle board, extrerior garde both face white laminated complete all as specified on drawing and directed.

Taking out old U/S drawer of side board and S&F New drawer to be made of 12mm thick, well seasoned sheesham wood planks and 6mm thick commercial ply at bottom of drawers.

Removing of U/S knob and S&F new knob best quality as per drg and directed by Engineer-in-charge.

HAT STAND WITH MIRROR -FD-206 & 233

Taking out unserviceable mirror of hat stand and S&F of new mirror, 4mm thick of Make : Atul/Modiguard and fixed complete all as pecified on drawing and directed.

S&F in replacement of new aluminium cap hooks as per existing shape & sixe complete all as specified on drawing and directed.

Taking out unserviceable back portion plywood of hat stand and S&F of new 12mm thick plywood, BWR grade, commercial type complete all as specified on drawing and directed

Removing of old unsv plywood front side of hat stand and and S&F new plywood of hat stand one side teak face 4 mm thick with 4 mm thick teak wood beading all round

Chair Varandah (FD-333,19,256)

Removing of Old/unsv cane from chair Verandah and Recanning of Chair Varandah mat pattern with 4 to 5 mm wide 0.5 mm thick half round new plastic cane white colour ( Make-Saha/Primer) as specified in drg and directed by Engr-in-Charge

M&L for welding of broken frame of chair verandah as and where required as specified and directed by Engr-in-charge

Removing of old u/s missing hard PVC shoes to chair verandah and S&F new PVC hard shoes.

Table Office Officer steel (FD-1003)

Removing old u/s top of table office officer steel and S&F of new top of Pre laminated particle board 18 mm thick exterior grade both side laminated with 4mm thick teak wood beading duly polished around the top complete all as specified and directed. Make of board Novapan/Archid/Bhutan Board/Century Ply

Taking out U/S drawer of table office officer steel and S&F new drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint ,rest all as per drg and directed by Engr –in-charge..

Removing U\S / damaged legs and S & F New leg made 25mm sqre conduit pipe of 1.6mm wall thickness and painted with synthetic enameled paint OG rest all as per drg and directed by Engr-in-Charge

M & L for butt welding and making complete Broken frame steel of Table Office Offrs Steel as specified in drg and as directed by Engr-in-Charge.

Providing broken PVC legs shoes best quality to leg of table office officer steel rest all as per drg and directed by Engr-in-Charge.

Table office Clk steel- (FD-1004)

Removing old u/s top of table office clk steel and S&F of new top of Pre laminated particle board 18/19 mm thick exterior grade both side laminated with 4mm thick teak wood beading duly polished around the top complete all as specified and directed. Make of board Novapan/Archid/Bhutan Board/Century Ply

. Taking out U/S drawer of table office clk steel and S&F new drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint ,rest all as per drg and directed by Engr –in-charge..

Removing damaged legs and S & F New leg made 25mm sqre conduit pipe of 1.6mm wall thickness and painted with synthetic enameled paint OG over a coat of red oxide primer,rest all as per drg and directed by Engr-in-Charge

M & L for welding of Broken frame steel of Table Office clk Steel as specified in drg and as directed by Engr-in-Charge.

Providing broken /missing PVC legs shoes best quality to leg of table office officer steel rest all as per drg and directed by Engr-in-Charge.

Table Steel 3'X2' with & w/o drawer (FD-1007 & 1008)

Taking out old U/S existing top from Table Steel 3'X2' with &w/o drawer and S&F of new top made of 18 mm thick Pre Laminated particle board exterior grade both side laminated with 4mm thick teak wood beading duly polished around the top complete all as specified and directed Make of board Novapan/Archid/Bhutan Board/Century Ply

Taking out U/S drawer of table 3'x2' steel with drawer and S&F new drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint ,rest all as per drg and directed by Engr –in-charge..

Removing U\S / damaged legs and S & F New leg made 25mm sqre conduit pipe of 1.6mm wall thickness and painted with synthetic enameled paint OG over a coat of red oxide primer,rest all as per drg and directed by Engr-in-Charge

M & L for welding of Broken frame steel of Table 3'x2' Steel as specified in drg and as directed by Engr-in-Charge.

Removing of U/S PVC Leg Shoes of Table Steel 3'X2' with &w/o drawer and S&F of new PVC legs shoes of the same shape and size Rest all as per drg and directed by Engr-in-Charge

Chair CB Steel with Arms & W/O Arms (FD-75)

S&F new seats of teak wood duly painted and Canned with ½ round plastic cane 2mm wide 0.4mm thick and border with 3.5mm wide 0.5mm thick for chair CB steel with arms after removing existing damage/broken seat all as specified and as shown on drg.

S&F new back of new teak wood duly painted and Canned with ½ round plastic cane 2mm wide 0.4mm thick and border with 3.5mm wide 0.5mm thick for chair CB steel with arms after removing existing damage/broken back all as specified and as shown on drg.

S&F new mild steel cleats of size 50 X 25 X3mm in replacement of old U/S cleats by welding/screwing or as per directive by Engr-in charge to the frame complete of Chair CB steel with Arms duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint all as specified and as directed by Engr-in-Charge

Removing of old existing U/S cap and S&F new PVC cap for chair steel tumbler with arms.

Removing of U/S shoe and S&F new hard rubber shoes to chair steel tubler with arms with appropriate steel screw all as directed by Engr-in-Charge

Removing of old U/S arms and S&F new arms seasoned teak wood duly painted with steel screw appropriate size complete of Chair CB steel with Arms as specified and shown on drg all as directed by Engr-in-Charge

Teapoy Varandah (FD-255 & FD/E6/MAP/17) Taking out old U/S top of teapoy varandah and S& F New Top made of 18mm thick block board laminated with sunmaika sheet of teak veneered shade on top of reputed company and 4mm thick teak wood beeding al round the top duly polished (Make Navopan/Century/Archid/Bhutan Board) and repairing the entire frame including welding if required and over a coat of red oxide before two coats of painting of white enamel paint after preparation of surface as specified in drg and directed by Engr-in-Charge

TABLE BED SIDE MAP (FD/E6/MAP/15) Supply & fixing in replacement of unsv top made out of 18/19mm thick prelaminated particle board (Make- Novapan, wintuff, Action Tessa) of teak shade exterier grade, 6mm beading all round the top of table bed side MAP using 1st class seasoned hard wood (Indian teak wood) including dismantling of unsv components all as specified and shown on drg.

All as per Ser item No.here-in-before but replacement of unsv side wall made out of 18/19 mm thick prelaminated particle board of Sheesham shad, 6 mm Sheesham wood beading all round the sides

All as per Ser item No. here-in-before but replacement of unsv rear wall of 6mm plywood and polishing complete all as per drg

All as per Ser item No. here-in-before but replacement of front part of bottom drawer made of 18mm thick prelaminated particle board complete as per drawing

All as per Ser item No. here-in-before but replacement of front part of upper drawer made of 18mm thick prelaminated particle board complete as per drawing

All as per Ser item No. here-in-before but replacement Telescopic Channel of 1 mm thick complete as per drawing

All as per Ser item No. here-in-before but replacement Telescopic CP Handle complete as per drawing

CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/07)

Supply & fixing 18 mm thick pre laminated particle board top (Make- Novapan, wintuff, Action Tessa) including 25 mm hollow steel pipe inserted in 20 mm MS rod welded to frame openable with PVC edging (Hinged on RHS) screwed to . as in replacement of chiar school with hand board including dimantling of unsv components/parts complete all as specified and shown on drg as directed by Engineer-in-Charge.

All as per Ser item No. here-in-before but Replacement of moulded one piece PVC back and seat , Make- Ballowal/ Blowplast

Preparation of old steel surface of chair school with hand board and applying one coat of black Japan paint complete all as specified and shown on drawing

Table Computer (FD/E6/MAP/03)

M/L for removing UNSV top and S&F top made out of block board with sunmaika sheet 18/19mm exterior grade of approved make beaded with PVC edging as per drg and specification and as directed by Engr-in-charge.

S&F drawer with telescopic channel.

S&F sliding board with telescopic channel.

S&F sides.

S&F PVC shoes.

Almira large steel/Med steel with shelves &1/2h &1/2s Fd-1031 & FD-1032 map drg

Taking out existing unserviceable locks almirah large/medium steel and S&F of new locks of six leavers of existing shape & size with duplicate keys of Make : Godrej /Harrison complete all as specified and directed.

Taking out broken/damaged handle of steel almirah and S&F of new handle of mild steel chromium plated of existing shape complete all as specified and directed.

Taking down existing unserviceable shelves of almirah large steel and S&F of new shelves made of 1mm thick mild steel of existing shape and size,duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint complete all as specified on drawing and directed.

All as per item here in before but shelves of almirah medium steel

Taking out old unserviceabledoor hinges from almirah large/medium steel and S&F of new doorhinges mild steel 75/80 mm long complete all as specified and directed.

Taking down unserviceable cover locks from almirah large/medium steel and S&F of new cover locks made of 1mm thick mild steel of existing shape and size complete all as specified on drawing and directed.

Taking down unserviceable three way locking device & rod set from almirah large steel and S&F of new three way locking device & rod set of existing shape and size complete all as specified on drawing and directed.

All as per item here in before but three way locking device & rod set of almirah medium steel

Dismantling of unserviceable legs of almirah large steel and S&F of new made of 1mm thick mild steel sheet of existing shape and size,duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint complete all as specified on drawing and directed.

All as per item here in before but legs of almirah medium steel.

Locker Steel (FD-1029 & 257 similar pattern): Removal of following existing unserviceable components of Locker Steel or similar MES pattern or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including welding ,providing hinges, placing every part in-tactduly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint to the disturbed portion, as applicable as per drgs or as directed by Engr in Charge.

Handle

Hasp & Staple

Shelf

CP Hanging rod 19mm dia

Leg both

Chair computer (TP)

Taking out old seat and S&F New seat as specified/Drg

Taking out old UNS back and S& F New back as specified/Drg

Taking out old UNS Arms and S&F New Arms as specified/Drg

Taking out old unsHydrolick system and S & F New Hydrolick systeam as specified/Drg

Taking out old UNS Coaster wheel and S&F New coaster wheel as specified/Drg

Chair revolving executive (TP)

Taking out old UNSV seat and S&F New seat as specified/Drg

Taking out old UNSV back and S& F New back as specified/Drg

Taking out old UNSV Arms and S&F New Arms as specified/Drg

Taking out old UNSV Coaster wheel and S&F New coaster wheel as specified/Drg

Taking out old unsv Hydrolick system and S & F New Hydrolick systeam as specified/Drg

Charpoy GI Pipe: (FD-220)

Removing of old unserviceable elbow from charpoy GI pipe and S&F new GI three way elbow 32mm dia med grade ISI marked to charpoy GI pipe complete all as specified and directed Make-Jolly / RI / RM /KI//ISI marked

Removing of old unserviceable check nut from charpoy GI pipe and S&F new GI check nut 32 mm dia 10mm thick to long/ short rail of charpoy GI pipe complete all as specified and directed

S&F in replacement of U/S long rail of charpoy GI Pipe 32mm dia medium grade heavy duty threaded on both ends all as specified and shown on drg and as directed by Engr-in-Charge Make Jindel/Tata/Prakash Surya

Cutting of dismantled old long rail of charpoy GI Pipe 32mm dia modifying into short rail by threaded both ends and ends fixing the same to charpoy GI pipe all as pecified and as directed by the Engr-in-Charge.

Cutting of dismantled old short rail of charpoy GI Pipe 32mm dia and modifying into legs by threading of ends and M&L for welding the clamps for FMN set and fixing the same to charpoy GI pipe all as specified and as directed by the Engr-in-Charges.

S&F new three in Nos Iran flate size 4'x2''x6mm long to be fixed by drilling on Flate Iron and three whole on each long rail alongwith ply over it and crewed with nut and bolt duly black painted over a coat of red oxide steel primer for fixing by 6 mm dia 1 ½” long bolt of flat head with nut and washer as directive by directed by Engr-in-Charge.

Removing of old/unsv ply wood 12mm thick and S&F new ply wood 12mm commercial face BWR greade size 1980x900mm (Make Archid/ Century) ISI Marked and directed by Engr-in-Charge.

Table Dinning ORs :- (FD-165 (M)

Supply & fixing as in replacement of unserviceable Top made out of 19 mm thick block board commercial Ist quality covered with aluminium sheet 24 guage thick with steel screws (Note:- Blockboard shall be in one piece and joints etc in the length/width shall not be accepted in any case).unserviceable components/parts of table dining OR's steel including cutting, welding, turning, bending etc all as shown on drg, as specified and directed by Engineer-in-Charge/ GE.

S&F of new Rubber shoes to be table Dinning Ors all as specified on drg

Book case steel with glass FD-90M, 1028

Taking out old UNSV handle and S&F New handle including nut and bolt with washer complete as per existing shape and size as per Drawing.

Taking out old UNSV/ rusted shelves and S&F New shelves dully painted complete as per existing shape and size as per Drawing.

Taking out old UNSV/ broken glass pan and S&F New glass pan 5 mm thick complete as per existing shape and size as per Drawing.

Taking out old UNSV lock and S&F New lock with duplicate key complete as per existing shape and size as per Drawing.

Bed hard Map : FD/E6/MAP/08 ( R)

Bed hard Map : Removing the old unsv/broken existing plywood top from bed hard and S & F new Ply wood top of 12mm thick BWR grade commercial type , complete all as per existing shape and size as per drg. ((Make Archid/ Century) ISI Marked and directed by Engr-in-Charge.

Removing of Old brokne/unsv Stiffners and S & F New Stiffners of 25mmx25mm Ms sqr pipe of1.6mm wall thickness as per existing shape and size (Set of Four) welded between long rails duly painted with two coats of black enelamed paint over a coat of red oxide primer, complete all as per drg and as directed.

Removing of Old broken/unsv PVC Shoes of bed hard and S & F New PVC shoes as per existing shape and size as per drg and as directed by engineer in-charge.

Charpoy MS Tubing : FD/MAP-II/01 and CWE/TEZ/FD-04

Removing the old unsv/broken existing plywood top from Charpoy MS Tubuing and S & F new Ply wood top of 12mm thick BWR grade commercial type , complete all as per existing shape and size as per drg. ((Make Archid/ Century) ISI Marked and directed by Engr-in-Charge.

Removing of Old brokne/unsv Stiffners and S & F New Stiffners of 25mmx25mm Ms sqr pipe of1.6mm wall thickness as per existing shape and sise (Set of Four) welded between long rails duly painted with two coats of black enelamed paint over a coat of red oxide primer, complete all as per drg and as directed.

Removing of Old broken/unsv PVC Shoes and S & F New PVC shoes as per existing shape and size as per drg and as directed by engineer in-charge.

Polishing M&L for preparation of old painting/polishing surfaces by scrubbing existing old polished surface with sand paper, cleaning all dust, filling & stop bore holes with pasty filter prepared by mixing plaster of paris water to a creamy consistence and adding raw in quantity required to obtain the desired colour to the base and to surface allow to been dried up and set aside for 24 hrs for the surfaces to harden rub the surface with sand paper it is thoroughly smooth and dried to receive two coat of acrylic wood finish polish complete all as specified and as directed at site.

Chair dining (FD-16,203,228 & 279)

Chair Easy ( FD-17,201 & 229)

Chair writing/CBA ( FD-20,202,250 & 280)

Bed Ply wood top/cot newar/bed newar ( FD-213,245,246 & 247)

Table Center ( FD-29,235 & 274)

Table 3'x2' With/Without Drawer ( FD-41,224,231,283 & 284)

Table Peg ( -FD-46,236 & 277)

Table Writing Med,small ( FD-249 & 275 & DB-3902)

Teapoy (FD-232 & 284)

Side board ( FD-26,241 & 371)

Book Case (FD-237)

Table Dressing Ladies ( FD-32,251 & 378)

Table Dressing Gents (FD-31 & 230)

Table Bed Side (FD-28,248 & 276)

Bin soiled linen (FD-244)

Stool dressing (FD-252)

Hat stand ( FD-206 & 233)

Sofa Set 5 Seated (FD-281)

Table Dining 6/8 Pers

Chair Wooden Bootom

Chair dining Map (FD/E6/MAP/04)

Painting M&L for preparation of old painting steel surfaces of any descripting exceeding 10cm width on girth inner side and outer side by cleaning with abrasive cloth, removing dirt, denting deparession if any, applying putty for smooth surfaces and apply a coat zinch chromate primer and painting and two coat of olive green / grey/black/white synthetic enamel paint on both side for glossy finish inside and outside complete all as specified and as directed at site. Make : Berger/Asian/Shalimar.

Almirah Large Seel

Almirah Med Steel

Bed Hard steel

Book case steel with glass

Chair CB Steel with arms

Chair CB Steel without arms

Charpoy MS Tubing

Chair Verandah

Chair CB Steel Padded

Locker Steel

Ladder for loft

Rack steel 6 tier

Side Rack with tray 3/4 space steel

Stool steel

Shoe Rack steel

Table 3'x2' with or without dr steel

Table Office Clk Steel

Table Offie Offrs steel

Teapoy Verandah GENERAL NOTES FOR ALL ITEMS OF BOQ Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defense area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

Shri Harendra Kumar Rai

D G Corporation

M/S SAKTI PADA DEY

M/S Inder SINGH SABARWALL

M/s Brahamaputra Wood Industries

DRISTEE ASSOCIATES

M/S Manjit Singh