M & R of SSW G-2 RWSS

Name of work:- “Reparing Work of Civil and and Electro Mechanical

components at Jalundra WTP & Repairing work of various HW of

SSW G-2 RWSS Ta:- Dehgam District:- Gandhinagar.”

Estimated Cost: Rs.

Gujarat Water Supply & Sewerage Board

Zone –II, Ahemdabad

Volume III: Price Bid Jalundra WTP Repairing

1. Name of work:- Reparing Work of Civil and and Electro Mechanical components at

Jalundra WTP & Repairing work of various HW of SSW G-2 RWSS Ta:- Dehgam

District:- Gandhinagar.The bidder shall quote his firm and fixed price for the entire work

under this Contract, defined in more details in various sections of this bid document.

2. The rates and prices shall be submitted in the electronic formats given by n-procure

which is called Schedule-B ( Schedule B1, Schedule B2....,), rates and prices received

in any other formats will be rejected and the Bids will be disqualified.

3. It will be entirely at the discretion of the Employer to accept or reject the bidder’s

proposal, without giving any reasons whatsoever and the bidder shall not be permitted

to withdraw his bid on this account.

supplied from the by client.

5. In Schedule-B the Bidder shall quote prices for the items percentage rate as called for

against the BOQ item.

6. In Schedule-C the bidder has to Procure and must supply at site free of cost and has

to hand over to Engineer in-charge Within one month from date of work order given as

Schedule-B only will be considered for price evaluation & shall form a part of the

Contract Agreement.

Schedule-B and shall be carried forward to Schedule-B for comparison and evaluation.

9. Wherever for a particular item the quantities have been specified payment shall be on

unit rate basis and unit variation in quantity will be paid with pro rata basis.

10. Each item is to be individually priced online and the amounts shall be added up to arrive

blank except where the item description requires the item to be priced on "as

applicable” basis. The item shall not be priced if it is “not applicable” to the bidder’s

design, in which case the bidder shall add the words “NOT APPLICABLE”. The wording

in the item description is for subject matter guidance only; clause references are

indicative only and all other relevant clauses shall also be referred to. The prices shall

allow for all the works covered under the bid and all liabilities and contractual

obligations whether separately specified or not. Items against which no prices are

quoted shall not be separately paid for and the bidder shall be deemed to have covered

the cost of execution of such items (according to the requirements of the bid document)

in the prices quoted for other items.

satisfactory working/safety of the system as specified, will not be separately paid for by

the Employer when executed and shall be deemed to be already covered by other items

and rates listed in the price sheets No extra payment shall be given for any item which

is required to complete and perform the project.

pendency of the Contract. In case of any discrepancy noted in the various price

Volume III: Price Bid Jalundra WTP Repairing

schedules, those in Schedule B will be considered and binding on the Contractor. The

corrections if any will be considered for financial evaluation of the bid.

13. Schedule - D gives the basis of interim payment for construction of civil works.

14. The bidder shall be deemed to have allowed in his price for provision, maintenance and

final removal of all temporary works of whatsoever nature required for construction

including temporary bunds, diverting water, pumping, de-watering etc. for the proper

execution of works. The rates shall also be deemed to include any works and setting out

that may be required to be carried out for laying out of all the works involved.

15. Prices shall be filled online only.

Specifications and other sections of these bid documents and these documents are to be

taken as mutually explanatory of one another.

17. The bidder shall interpret the data furnished and carry out any additional survey work, or

investigation work required at his own cost.

18. The prices quoted shall also include the cost of materials utilized for testing.

19. The bidder should acquaint himself with the site conditions including the access to Work

site. The successful bidder shall have to make suitable access to work sites at his own

cost. These accesses will be used by the other contractors working for GWSSB.

prices shall include all the equipments / materials / accessories and services required as

21. 1% of the value of work will be deducted from the Running bill against labour cess which

is non refundable.

22. Third Party Inspection / CSC agency will be deployed by GWSSB and charges of the

same will be borne by GWSSB.

23. Any expenditure incurred by inspection/ CSC agency for the work misinformed by the

contractor and charges of inspection/ CSC agency without any work due to

misinformation shall be recovered from the contractor.

24. The rates quoted shall be exclusive of GST, but inclusive of all other taxes, duties which

shall not be paid extra. While GST will be paid for admissible part of actual work done at

the approved tender rates and tender conditions of price variation. GST shall be paid as

per prevailing rates at the time of payment. The TDS shall be deducted at source as per

provision of IT rules and GWSSB policy.

25. The rates should be quoted exclusive of GST, but inclusive of all other taxes as per

Volume-1(B), General Conditions of Contract, Clause No-47.

26. The process requires that the bidder shall quote his price for the work components

during the entire period of performance of the contract except price variation allowed for

supply of MS/DI/PVC/HDPE pipe as per Volume-I(B), General Conditions of Contract.

27. Payment shall be made for the components for which lump sump prices are quoted, as

per the schedule of payment. Total cost will be worked out on the basis of work done of

Volume III: Price Bid Jalundra WTP Repairing

individual items and rates quoted against those particular items only.

28. Agency shall have to take Insurance policy and intimate to GWSSB along with the

evidence within time limit. In case of non compliance entire responsibility shall be rest

with the agency and required amount shall be recovered from any due amount of the

29. GWSSB can recover penalty amount from the agency for not taking the insurance.

Though the penalty amount is recovered, responsibility of the agency for taking insurance

shall be continued and will not be escaped from the responsibility.

30. The contractor shall apply fair means of stock maintenance and shall adopt accounting

standard as may be prescribed under GST Act as applicable in the state of Gujarat. For

arriving at the difference in procurement prices due to introduction of GST it will be open

for the Board to ask for original invoices, lorry receipt, weigh bridge slips, payment details

and such other documents as may be required for the purpose.

The claim of contractor regarding GST shall have to be backed by documentary evidence

substantiating the actual payment of tax duly certified by the competent tax authority. The

final decision regarding the quantum of claim amount to be recovered or reimbursed shall

be of the competent authority of the GWSSB and shall be binding on the contractor.

31. The contractor shall dismantle and remove the existing MS Clariflocculator Bridge. All

dismantled materials and scrap shall remain the property of the Board and shall be handed

over to the Engineer-in-Charge/designated location. No separate payment shall be made

for this work, and the cost shall be deemed included in the quoted rate.

Signature of Contractor Executive Engineer,

PH Works Division

Volume III: Price Bid Jalundra WTP Repairing

2. BID FORM (WITH PRICE)

Bidders are required to fill up all the blank spaces in this Bid Form.

SUB : Name of work:- Reparing Work of Civil and and Electro Mechanical components at

Jalundra WTP & Repairing work of various HW of SSW G-2 RWSS Ta:- Dehgam

District:- Gandhinagar.

1. Having visited the site and examined the Bid Documents, Drawings, Conditions of

Schedules etc. including Addenda / Amendments to the above, for the execution of the

above Contract, we the undersigned offer to Design, Engineer, Procure, Construct,

Complete, Commission, operate, maintain and Run the whole of the said works for

(six) Months from the date of commissioning including defects liability period as given

in Conditions of Contract and in conformity with the drawings, conditions of Contract,

Documents, including Addenda Nos.____________________ (insert numbers) for

Lump sum fixed price of Rs._______________________________.

_______) for Construction including free trial run for three months or such other sum as

may be ascertained in accordance with the conditions.

2. I / We agree that

(a) If we fail to provide required facilities to the Employer’s representative or any other

person / Agency by the Employer to perform on his behalf for carrying out the

inspection and testing of materials and workmanship.

(b) If we incorporate into the Works, materials before they are tested and approved by

the Engineer’s representative

(c) If we fail to deliver pure water of required quantity according to the conditions /

stipulations of the Contract, the Engineer will be at liberty to take any action

including termination of Contract and impose at his absolute discretion any

penalties, and / or reject the work.

3. We undertake, if our Bid is accepted, to complete and deliver the works in accordance

with the Contract with in 6 Months, inclusive of monsoons, from the date or receipt of

Letter of Acceptance issued to us by you.

Volume III: Price Bid Jalundra WTP Repairing

4. We agree to abide by this Bid for a period of 180 days from the last date of submission

of bid and it shall remain binding upon us and may be accepted at any time before the

expiry of that period.

5. In the event of our Bid being accepted, we agree to enter into a formal Contract

Agreement with you incorporating the conditions of Contract thereto annexed but until

such agreement is prepared this Bid together with your written acceptance thereof shall

constitute a binding Contract between us.

6. We agree, if our Bid is accepted, to furnish performance Security in the forms and of

value specified in the Clause 1 of Volume-IB, General Conditions of Contract.

7. We have independently considered the amounts of liquidated damages shown in

Appendix to Bid and agree that they represent a fair estimate of the damages likely to

be suffered by you in the event of the work not being completed by us in time.

8. We understand that you are not bound to accept the lowest or any bid you may

(Name of the person)

(In the capacity of)

Duly authorized to sign Bid for and on behalf of

(Fill in block capitals)

Volume III: Price Bid Jalundra WTP Repairing

GUJARAT WATER SUPPLY & SEWAREGE BOARD

Name of work: “Reparing Work of Civil and and Electro Mechanical components at

Jalundra WTP & Repairing work of various HW of SSW G-2 RWSS Ta:-

Dehgam District:- Gandhinagar.”

Sr.No. Particulars Rate / Unit Place of Delivery

[1] Contractor shall have to buy & bring ordinary Portland Cement as per I.S. 12269 - 1967 or

its latest revision with I S I Mark from open market and produce the bill of purchase along

with necessary test certificate at the time of claiming Running Account Bills. The Cement

shall be tested in the Departmental Laboratory at the cost of the Contractor whenever

instructed by Engineer-in-charge. No extra cost should be claimed by the Contractor for the

[2] All materials except shown in Schedule-"A" and required for the work shall be provided by

[3] The Contractor shall arrange lifting and carting of materials from Departmental Store to site

of work which includes loading, unloading and proper stacking of materials

[4] The Contractor has to provide safe store before taking delivery of materials.

[5] The materials not shown in Schedule-"A" will be issued at issue rate or market rate which is

on higher side if the same is available with the Departmental and if found in the interest of

[6] Any material remaining un-used at the time of completion of work or termination of contract

shall be returned to departmental store in perfectly good condition at Contractor's cost.

When materials are supplied free of cost for use in work and surplus and unaccounted

balance thereof are not returned to the Department. Recovery in respect of such balances

will be affected at double the applicable issue rate of the material or the market rate

whichever is higher.

Signature of Contractor

Executive Engineer

P H Works Division

Volume III: Price Bid Jalundra WTP Repairing

SUMMARY(SCHEDULE - B)

Name of the Work :- " Providing, Supplying, Lowering & Laying and ancillary

work of 355.6 mm dia. MS pipe line for Labhor Section and 406.4 mm dia. MS

pipe line for Jalundra Section (old line damaged by Flood in Aug-2024) in

Sr. No Description Upto 2 decimal

4 Total Amount (1+2)

4 Total Amount (1+2)

Rebate on above tendered amount (if any) ………….

6 Net amount considering rebate (3-4)

Total amount in words : sixty seven lacs seventy seven thousand nine hundred seventy

Total amount in words : sixty seven lacs seventy seven thousand nine hundred seventy

one rupees and thirty seven paisa.

Deputy Executive Engineer Executive Engineer

P. H. S. Sub Division P H Works Division

Gandhinagar Gandhinagar

Volume III: Price Bid Jalundra WTP Repairing

Name of Work: Reparing Work of Civil and and Electro Mechanical components at

Jalundra WTP & Repairing work of various HW of SSW G-2

Schedule-B1- Repairing work

SR DESCRIPTION Unit Qty Rate Amount

Providing, fabricating, fixing/ installing/ fitting &

commissioning Clarifier M.S Bridge with chequered

plate plat form 1 m wide, scrapers, floculator

1 connections with rail sand wheels rotating RMT

arrangement incl.peri pheral trolley, central bearing

etc. complete size as per design. Should be of

Motor & Gear box for Clarifier bridge Set Extra for

motors of required RPM and 3 gear box assemblies

2 with one slippering unit including wiring and Set

installing switch and control panel as per

Flash Mixer Agitator

Providing, installing & commissioning Flash mixer

impeller with motor, gear arrangement & electrical 77,371.00

cable connections, control panels etc (5HP)

Labour charges for repairing of Sluice valve/ Reflux

valve including materials, labours and testing etc.

complete 1,937.00

Providing, installing & commissioning Air agitation

5 system including Blowers (40 HP), piping and valve Set

arrangement etc, as per design FOR ALL BEDS -

TEFC induction motor IE 3 level

Supply, installation, testing & commissioning of

horizontal mono submersible pump set (Drain

pump) as per IS: 14220 / 1994 & its latest

amendments of following duty parameters with

suitable submersible motor as per IS: 9283 / 1994 &

its latest amendments working on 3 phase, 415 V ±

10%, 50 ± 3% Hz power supply, rated speed 2900 20,220.00

RPM of following duty capacity. Material of

Constructions: Impeller: High tensile brass / LTB II;

Casing: CI FG 260; Pump & Motor shaft: SS 304;

Bearing Bush: LTB III

30 m3/hr, 10 mtr head

Repalcing of WTP FILTER PIPING MATERIAL -

MS ( for Inlet, backwash Header,filter outlet,Air

blower header or if any as per requirement to

complete the item) & Replacing of existing all sluice

valve for (Back wash inlet, Filter bypass, Filter

Outlet, CLSludge Removal, Recyleing unit or if any

7 to complete the item), Butterfly valve (Air BLower Job

Discharge, For bed distribution or if any to complete

the item), reflux valve (Sludge sump, Recyling sump

or if any to complete the item) with all necessary

ancillary item like flange, elblwos, tee, rubber

gasket, nut, bolts, all specials if any to complete the

item. all the removed material should be stacked

Volume III: Price Bid Jalundra WTP Repairing

Supply and fixing of various size of ISI marked

Heavy duty GI column pipe as per IS: 1239 part I

with latest amendment. (Rates are exclusive of

GST) Note:-Above rates of Heavy G.I. Column

Pipes are based on HRC WPI Index(163.7) and 1,100.00

Zinc WPI Index(154.6) in month of (November-

2021)(without GST)

9 Dismantling and removing of old Systems of WTP Job

Under Drain System

For Providing and laying & fixing PVC laterala (pipe)

10 6 kg/sq. cm of size & perforation as per hydraulic Sq.mt.

design to resit 10 m Back wash water head for filter

11 Sand for Rapid Sand Filter Bed

Providing & Supplying the filter sand of specified

effective size (0.45 to 0.70 mm) and uniformly

coefficient (not more than 1.7 nor less than 1.3) and

laying over gravel support conforming to IS 8491 (i)- 1,277.00

77 in filter bed of required depth as per design and

drawing inclusive of all lead. Sand , For Jalundra

12 Filter Gravel Size 2 mm to 65 mm

Providing & Supplying gravels of different size as

12.1 per design and drawing and layers in filter beds cum

inclusive all bed

Supply, laying, testing & commissioning of 1.1 kV

grade, XLPE insulated, stranded Copper conductor,

galvanized steel flat strip / round wire armoured,

extruded PVC type ST2 sheathed, heavy duty cable

13 (to be laid on wall surface with necessary clamps /

in existing cable trench / cable trays / conduit / pipe

sleeves at road crossing or floor as per site

requirement) conforming to IS: 7098 (Part-1) & IEC:

60502 (Part-1) of following sizes

13.1 4 c, 2.5 mm2 copper RMT 500.00

13.2 4 c, 4 mm2 copper RMT

13.3 4 c, 6 mm2 copper RMT

13.4 4 c, 16 mm2 copper RMT

13.5 4 c, 50 mm2 copper RMT

Volume III: Price Bid Jalundra WTP Repairing

Water Level Indicator/Depth Guage

Providing and fixing Water Level Indicator or depth

guage painted on TW plank 25 mm /M.S.plate 4 mm

14 thick folat,level indicator sliding wire on standard No

pulleys incl.necessary arrangement to prevent the

awinging etc. complete with calibration up to 5 mt.

Chemical Dosing Pump: incl. Tank

Providing and installing chemical dosing metering

pump model V-12 with PP head and flow of suitable 12,090.00

Control Panel Board

DOL / Star Delta starter suitable for local & remote

pump control application consisting of MPCB,

16 overload relay and contactors as per Type II

coordination including digital voltmeter, analogue

ammeter with selector switch, run hour meter,

required protective relays & control accessories

LV MCC Panel with DOL / Star Delta / ATS / Micro

processor based soft starter

SITC of LV MCC Panel totally enclosed, dust &

bermin proof, indoor type, minimum degree of

protection - IP 52 as per IS: 2147, operation on 3-

Phase, 4 Wire, 415V, 50Hz, Neutral effectively

grounded, with instrumentation compartments

accomodating LED type indicating lamps, control

contactors as per IS: 13947, CT of accuracy class- I

as per IS: 2705, relays, meters & control MCBs, air

insulated electrolitic grade Aluminum bus bar for

three phase & neutral system with incomming

breaker- microprocessor based Air Circuit Breakers

(electrically operated drawout type)/ air break fixed

type MCCB with trip free mechanism, current

limiting type as per IS: 8828, Motor Contractor (as

17 per type -2 coordination), Overload Relay with built-

in single phasing prevention feature & auxiliary

feeders as per SLD drawings, momentary contact

type push buttons, equipment fittings, bus bars,

cable boxes, cable gland, incoming & ougoing cable

connection for 1100V grade, Aluminium/ Copper

conductor XLPE / PVC insulated & PVC sheathed

armoured cable, 10% spare terminals, power wiring

using 1100V grade, FRLS insulated copper

conductor wires conforming to IS: 694 & 8130, cable

compartments / alleys of minimum 300 mm size, GI

/ Al earth bus bar for entire length. MCC shall be

fabricated from cold rolled, coled annealed (CRCA)

sheet steel & minimum thickness of various

members shall be as follows: Base Frame / Channel

/ Gland Plate: 3 mm, Load Bearing Members /

Doors: 2 mm and Internal Partitions: 1.6 mm

Volume III: Price Bid Jalundra WTP Repairing

Providing Approved make Triple Pole Metal Clad

18 Switch Fuse Unit 415/500 V. with HRC fuse of

suitable load and neutral link confirming to IS

0 250 A, Cat ii Ea

Erection & connection charges for 200A/250A/

300A/325A/ 400A HRC TPN as following

b)Erection on new angle iron frame duly painted 196.00

Supplying & erecting funnel type earthing having

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with 40 kg.

charcoal and salt with alternate layers of charcoal &

salt, 20mm.dia. G.I. pipe with Funnel with a wire

mesh for watering & bricks masonry block, C.I.

Cover complete as per para 7.3 of IS 3043 with

necessary length of double Galvanised Iron / copper

earth wire No 6 SWG bolted with lug to the plate

and covered in 12 mm dia. G.I. pipe 2.5 mtr long

complete connected to the nearest switch gear with

end socket as per direction & duly tested by earth

tester confirming to IS (As per drawing) with

following specification

0 (C) with 60 x 60x 0.315 cms. Copper earth Plate Ea

providing and erecting Cast iron earth plate size

X 30 X 0.35 cms. buried in specially prepared

Mtr. deep earth pit complete with necessary G.I.

strip in G.I. pipe 2 Mtr. long with coupling and G.I. 679.00

plug for earthing of switch gear, conduit run or

power plug etc.

Monoset sub. pump 3 phase 400/440 vott, 50 c/s.

A.C. Supply & 2900 RPM , as per IS 14220 MOC :

Casing: CI-FG260, Impeller : Bronze & Shaft :

SS:41 (Rates exclusive of GST)

SM - 2.1 - Rating 4 HP, 220 LPM Discarge,22.5 Mtr

21.1 Head for inspection Gallary (Labhor (1W+ 1S) + No

Jalundra(1W+ 1S))

SM - 2.5 - Rating 10 HP, 498 LPM Discarge,

21.2 Mtr Head for recirulation and backwash (Labhor No

(1W+ 1S) + Jalundra(1W+ 1S))

Chlorination Plant:

Providing, installing & commissioning Chlorination

plant as per design capacity with all equipments for

pre/ or post chlorination.

Gravity feed type chlorinator No

Volume III: Price Bid Jalundra WTP Repairing

Providing and erecting, heavy duty flood light

integral luminaire comprises die cast aluminium

body with heat resistant toughened front glass,

silicon rubber gasket,anodised reflector hot deep

powder coated cradle clamp with suitable size of

necessary built in control gear complete with lamp.

(a) with one no. 70 watt HPSV / Metal halide lamp No

Providing the gunniting to interior surface of cement

/ masonry / Water Tank of various capacities as

specified at various places with cement mortar (1:2)

in thickness of 40 mm including chiselling and

scraping loose concrete and plaster incl. providing

and fixing in position 6 mm dia. mild steel bars

reinforcement at 15 cm c/c both ways including

fabricating and cost of binding wires including

centering , staging all equipments etc. complete

including scaffolding , carting of all type of material

and equipments to site of work and giving hydraulic

testing up to satisfaction of engineer in – charge .

With vertical walls ,columns, braces and shaft up

Do- for columns ,braces and shaft staging above 6m

24.3 Do- for RCC container (inside) Sqm 25.00

Distempeing (Two coats) with oil bound distemper

of approved brand and manufacture and of required

shade on wall surfaces to give an even shade, over

and including a priming coat with distemper primer

of approved brand and manufacture after thoroughly 498,000.00

brushing the surface free from mortar dropping and

other foreign matter and also including preparing the

surface even and sand papered smooth.

Providing and erecting Halogen tube

Watt./1000 Watt. Cat.III 137.00

Providing and erecting Approved make Ceiling fan

with double ball bearing ISI mark with condenser

A.C. 23OV.50 c/s.1200 mm. sweep complete,

canopy erected on existing hook or clamp with 1,581.00

earthing. [Make shall be approved by Engineer in

C.I. Gates : providing fabricating and fixing

/installing C.I. gates of size as per design with

operating handle etc.for by pass arrangement with

Providing, Supplying & Installing of PVC Door (2.5 ft

29 x 6 ft ) 25mm thickness with Aluminiuim frame & GI Nos.

Volume III: Price Bid Jalundra WTP Repairing

Providing Chain Pulley block with triple gear

arrangement, lifting hook load chain & hand chain &

30 locking device with necessary mounting girder Nos. 1.00

structure spur gear travelling trolley & all

accessories 2 Tone

Providing and laying polished Kota stone slab

20mm (Average) thick base of cement mortar 1:6

: 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

31 coarse sqm 32.5

sand) laid over and jointed with grey cement slurry

with pigment to match the shade of slab including

and polishing etc. complete. (A) 25mm thick

Providing and fixing rolling shutters of approved

of 80 mm wide M.S. laths inter-locked together

entire length and jointed together at the ends by end

mounted on specially designed pipe shaft with

32 bracket plates, sqm 12

guide channels and arrangements for inside and

locking with push-pull operation complete but

cost of hood cover and spring. (B) Shutters having

Providing and fixing Hood cover for rolling shutters

Shutters having width 3.5 meters and above

Providing an fixing 25 mm x 5.2 mm MS railing with

three horizontal rows and posts of angle iron of size

65 mm x 65 mm x 8 mm RCC 150 mm and

meter height and placed at 1.85 mt / c/c including

painting two coats and anchorage in CC etc

35 Providind & fixing of Exhaust fan of DSP 300 mm Nos. 5.00

MS Ladder (without saftey cage)

Providing and fixing 50 cm wide M.S. Ladder

fabricated from M.S. Flats 10 mm x 75 mm with

mm dia steel bar steps in double rows, @ 30 cm

C/C. The include stays of 10 mm x 50 mm flats fixed

at 3 meter C/C with welding anchoring and 3 coats

anticorrosive paint.

Item No 14 (a) plus Rs. 67 per kg of additional

structural steel consumed for safety cage

(b) Note: For M.S. Ladder(With safety cage)

Item No 14 (a) plus Rs. 67 per kg of additional

structural steel consumed for safety cage

Volume III: Price Bid Jalundra WTP Repairing

Providing and fixing hard drawn steel wire fabric

75mm x25mm mesh or weight not less than 7.75 kg.

per Sq.M. towindow frames etc. including 60 x

20mm beading of teakwood.

Providing and supplying ISI mark CI D/F Butterfly

Valves as per IS:13095 (Latest Edition) of following

class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete.

Butterfly valves IS 13095 with ISI mark PN 1.6 -

Lowering, laying and jointing in position following C.

I. / D/F Reflux valves, Butterfly valves, Sluice valves

39 and Air valves including cost of all labour, jointing

material, including nut bolts and giving satisfactory

hydraulic testing, etc. complete.

Butterfly valves IS 13095 with ISI mark PN 1.6 -

Purchasing & supplying at site of works, with

Railway freight, loading, unloading, carting, etc.

complete such as joints, channels, angles, iron rails, 72,916.00

etc.Angles 10mm & above thick

40.1 I beam having wt 61 Kg/mt

Labour charges for lowering laying, fixing, various

41 size of M. S. section such as joints channel, angles MT

plates etc. complete.

Providing, supplying and installing 1 inch UPVC

42 pipe for chlorination with fittings such as NRV, RMT

Providing ,Supplying and installing 2 inch UPVC

43 pipe for chlorination with fittings such as NRV,Bends RMT

Providing ,Supplying and installing 3 inch UPVC

44 pipe for chlorination with fittings such as NRV,Bends RMT

Executive Engineer

Sign of Contractor P H Works Division

Volume III: Price Bid Jalundra WTP Repairing

Schedule- B2- Maintainanace works

Iteam Name Amount

Qty Unit Rate (₹)

Dismentling doors,windows,ventilators etc.

(woodorsteel)shutters including chowkhats

1 architraves, holdfasts andother attachment etc. 6 Each

complete and stacking them within all lead and

lift.(ii) Exceeding 3 Sq.M. in area.

Providing and fixing in position collapsible steel

shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonals 20 x 5 mm size

with top and bottom rails of T_rin 40x 40 x 6 mm

with 38mm dia, steel pulleys complete with bolts, 5,660.79

nuts, locking arrangements, stoppers handles

including applying a priming coat of red lead

Providing, Fabricating, Supplying & erecting

Structural Steel work for a metal shed of size

6.5m x6.5m including coloumn, beams etc made

out of rolled steel section confirming to relevent 51,720.89

IS codes including Cuttting, welding, bolting,

Drilling & Fixing in postion.

Construction of compound ( 100 m. x 100 m. )

wall in brick masonary in C.M. 1:6, 23 cm thick &

2.10 m. height above G.L. having 10 cm thick

coping in C.C. M-20, both side 12 mm thick

4 cement plaster in C.M. 1:3, including excavation mtr

and foundation, PCC M-10 having width 75 cm &

thickness 20 cm, in foundation and plinth, B.B .

masoanry shall be 35 cm thick & 80 cm in depth

& 0.20 cm above G.L

Executive Engineer

P H Works Division

Sign of Contractor Gandhinagar

Volume III: Price Bid Jalundra WTP Repairing

Estimate for Lab Equipments

SR DESCRIPTION Unit Qty Amount

Jar-Test Appratus with all Necessary

1 Accessories For Deciding -PAC 10% Nos. 2 13323.36

Solution Dosing Of WTP

Analytical weighing scale with accuracy

upto 4 digits after decimal point

Providing and supplying microprocessor

based digital pocket PH tester.

Providing and supplying microprocessor

based digital pocket TDS tester.

Providing and supplying fluoride spot test

6 EDTA(0.1 Kg) Nos. 4 323.90

7 Burette with nominal capacity of 50 ml Nos. 4 349.32

9 Volumetric flask Nos. 2 164.00

10 Spatula Nos. 5 12.30

11 Graduated borosile plastic pippete(10ml) Nos. 5 20.50

Conical Flask set of 100ml, 250mm,

13 Dropping bottle 30 ml Nos. 6 246.00

Volumetric graduated cylinders set of

15 Wash bottle 0.00

16 Bueratte stand Nos. 2 514.96

17 Test Tube 15x125 mm, 10 ml Set 4 282.08

Executive Engineer

P H Works Division

Volume III: Price Bid Jalundra WTP Repairing

I/We am/are willing to carry out the work at % ABOVE/BELOW percentage ( should be written in

figure & words ) above /below the estimated rates mentioned above /below amount of my/our

tender worked out as under :-

Estimated amount put to tender Rs. Estimated amount put to tender Rs.

Rs. Add % Rs. Deduct %

Above Rs. Below Rs.

Total Rs. Total Rs.

( In words Rs. ( In words Rs.

Executive Engineer

Sign of Contractor P H Works Division

Volume III: Price Bid Jalundra WTP Repairing

1. As mentioned in the Conditions of contract, the Contract being a lump sum type turnkey

Contract on EPC basis, the provision of measurement will be applicable only for the

assessment of value of work done for inclusion in any interim certificate for part payment to

the Contractor.

2. The Schedule specifies the procedure for all such assessment of the items specified in

3. Each item of Schedule-B has been divided into broad components. The Employer's

Representative shall assess the value of each component as indicated in paragraph

4. Percentages are indicated against each component of each items specified in Schedule B,

based on the Employer's best appreciation of the value of the component as related to the

total costs of the concerned item as whole. A head titled (any other item(s)) is included in

each breakdown of schedule and the tenderer shall at the time of tendering indicate any

additional items which he considers necessary but cannot be covered by any of the heads

indicated in the breakup.

5. The percentage breakup as indicated in the Schedule may differ from that corresponding

to the tenderer’ s scheme and design and he should take this into account while quoting

his lump sum prices for the items specified in Schedule-B.

6. The contractor shall, after approval of his detailed designs and drawings furnish to the

Employer's Representative an initial bill of quantities to all major items, to be reviewed and

updated periodically with the Employer's Representative. This bill of quantities will be used

for assessment of percentage progress of the component at any stage. By measurement

jointly taken by the Employer's Representative and the Contractor, mutually agreed and

entered in the measurement books in the form and by the method approved by the

Employer's Representative, and signed jointly by both the parties.

Volume III: Price Bid Jalundra WTP Repairing

BREAK UP FOR INTERIM PAYMENTS

Percentage Payment to be

Item Description of Items

1 All Mechanical – Electrical Equipment & all civil

work shall have following three stages of payment

viz. On completion of Supply, on completion of

Erection / Installation & on completion of Testing &

Commissioning as per weight age specified above.

a On Supply of Equipment at Site 75 % of Weight age (Amount)

b After Installation / Erection of Equipment 15 % of Weight age (Amount)

c After Successful Testing & Commissioning of 10 % of Weight age (Amount)

Equipment (On Completion of Stipulated Trial

Executive Engineer

P H Works Division