REPAIR MAINTENANCE OF PUMP AND MOTOR AND COMPREHENSIVE MAINTENANCE DIFFERENT TYPE OF PUMPS AND MOTOR AND ALLIED WORKS AT WATER SUPPLY ONLY INSTALLATION AND ALLIED WORKS UNDER GE DEHU ROAD

Amount

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 55 LPS with head 122 mtr, motor capacity150 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable, repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Parts like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46. Note:(i) Spare parts for repair/replace will measured in respective items as per site required

Repair the Impeller 1st stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM 150/46 ,Make -Kirloskar or equivalent.

Repair the Impeller 2nd stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Coupling Key Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or Equivalent

Supply only Key for Impeller Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or Equivalent

Supply only Key for Sleeve Nut Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or Equivalent

Supply only Bolt for upper and lower half casing suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or Equivalent

Supply only Taper pin with washers and nuts for lower and upper half casing Coupling Key suitable for DSM pump .Make Make-Kirloskar or Equivalent .

Supply only Draining plug for casing suitable for 150 HP pump . Suitable for pump set Model no DSM 150/46 Make-Kirloskar or Equivalent .

Supply only Paper packing between lower and upper casing Key Suitable for pump set Model no DSM 150/46 Make-Kirloskar or Equivalent .

Supply only O ring for shaft sleeve Suitable for pump set suitable for Model no DSM 150/46 ,Make-Kirloskar or equivalent or Equivalent

Supply only Wear Ring suitable for Pump set Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent or Equivalent

Supply only Shoulder Ring in CI Suitable for pump set Model no DSM 150/46 150 HP Make-Kirloskar or Equivalent .

Supply only Interstage Ring Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Lantern Ring Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only DE ball bearing Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only DE Bearing Cover Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Cartridge for bearing, DE Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only NDE Bearing Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Cartridge for bearing, NDE Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Bearing cover, NDE Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Bearing Cap Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Bearing nut,Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Shaft sleeve, DE/NDE,Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only stuffing box bush,Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Water Deflector DE/NDE,Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Air vent, Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Hex screw for bearing cover, Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Cylindrical pin, Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Round Lock nut ,Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Gland Packing, Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Vent Valve, Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Flexible ST Hose Pipe, Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Gland stuffing box suitable for nut and bolts Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

Supply only Cooling PVC flexible of Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent

All As Above item No-01 above but centrifugal pump of discharge capacity 46 LPS with head 122 mtr, motor capacity120 HP Pump Make=Make-Kirloskar or equivalent . Model No RKB-100/23E35.

Repair the Impeller 1st stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no RKB-100/23E35Make-Kirloskar or equivalent.

Repair the Impeller 2nd stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no RKB-100/23E35Make-Kirloskar or equivalent.

Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no- RKB-100/23E35Make-Kirloskar or equivalent.

Supply only Coupling Key Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Key for Impeller Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Key for Sleeve Nut Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Bolt for upper and lower half casing Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Taper pin with washers and nuts for lower and upper half casing Coupling Key suitable for Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Draining plug for casing suitable for 15 HP pump .Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Paper packing between lower and upper casing Key Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only O ring for shaft sleeve Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Wear Ring suitable for Pump set Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Shoulder Ring in CI Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Interstage Ring Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Lantern Ring Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only DE ball bearing Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only DE Bearing Cover Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Cartridge for bearing, DE Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only NDE Bearing Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Cartridge for bearing, NDE Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Bearing cover, NDE Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Bearing Cap Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Bearing nut,Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Shaft sleeve, DE/NDE,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only stuffing box bush,Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar or equivalent.

Supply only Water Deflector DE/NDE,Suitable for pump set Model no DSM 150/46 ,Make-Kirloskar or equivalent or Equivalent

Supply only Air vent, Suitable for pump set .Model no- RKB-100/23E35,Make-Make-Kirloskar or Equivalent .

Supply only Hex screw for bearing cover, Suitable for pump set. Model no- RKB-100/23E35,Make-Make-Kirloskar or Equivalent .

Supply only Cylindrical pin, Suitable for pump set .Model no- RKB-100/23E35,Make-Make-Kirloskar or Equivalent .

Supply only Round Lock nut ,Suitable for pump set .Model no- RKB-100/23E35,Make-Make-Kirloskar or Equivalent .

Supply only Gland Packing, Suitable for pump set. Model no- RKB-100/23E35,Make-Make-Kirloskar or Equivalent .

Supply only Vent Valve, Suitable for pump set Model no- RKB-100/23E35,Make-Make-Kirloskar or Equivalent .

Supply only Flexible ST Hose Pipe, Suitable for pump set Model no- RKB-100/23E35,Make-Make-Kirloskar or Equivalent .

Supply only Gland stuffing box suitable for nut and bolts Suitable for pump set Model no- RKB-100/23E35,Make-Make-Kirloskar or Equivalent .

Supply only Cooling PVC flexible of Suitable for pump set Model no- RKB-100/23E35,Make-Make-Kirloskar or Equivalent .

All As Above item No-01 above but centrifugal pump of discharge capacity 61 LPS with head 85 mtr, motor capacity100 HP Pump Make=Make-Kirloskar or equivalent . Note:(I) Spare parts for repair/replace will measured in respective items as per site required

Repair the Impeller 1st stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Repair the Impeller 2nd stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Coupling Key Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Key for Impeller Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Key for Sleeve Nut Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Bolt for upper and lower half casing suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Taper pin with washers and nuts for lower and upper half casing Coupling Key suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Draining plug for casing suitable for 15 HP pump . Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Paper packing between lower and upper casing Key Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only O ring for shaft sleeve Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Wear Ring suitable for Pump set Suitable for pump se DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Shoulder Ring in CI Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Interstage Ring Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Lantern Ring Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only DE ball bearing Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only DE Bearing Cover Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Cartridge for bearing, DE Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only NDE Bearing Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Cartridge for bearing, NDE Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Bearing cover, NDE Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Bearing Cap Suitable for rpump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Bearing nut,Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Shaft sleeve, DE/NDE,Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only stuffing box bush,Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Water Deflector DE/NDE,Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Air vent, Suitable for pump set pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Hex screw for bearing cover, Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Cylindrical pin, Suitable for rpump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Round Lock nut ,Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Gland Packing, Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Vent Valve, Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Flexible ST Hose Pipe, Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Gland stuffing box suitable for nut and bolts Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

Supply only Cooling PVC flexible of Suitable for pump set DSM 100 HP make-Make-Kirloskar or equivalent .

All As Above item No-01 but Centrifugal Pump of capacity 130 LPS with Head 105 Mtr.with 75 HP motor Make : Grand force or equivalent.

Mechanical Seal suitable for 75 HP centrifugal Pump, Make : Grand Force or equivalent.

Bulk Impeller 99262569,suitable for 75 HP centrifugal Pump, Make : Grand Force or equivalent.

Shaft 99196563 suitable for 75 HP centrifugal Pump, Make : Grand Force or equivalent.

Kit wear part, suitable for 75 HP centrifugal Pump, Make : Grand Force or equivalent.

Kit Bearing, suitable for 75 HP centrifugal Pump, Make : Grand Force or equivalent.

Kit Chamber stack CRN155-4A,suitable for 75 HP centrifugal Pump, Make : Grand Force or equivalent.

All As Above item No-01 but Centrifugal Pump discharge 34 LPS at 76 Mtr/ 75 Mtr / 60 Mtr Head for 60 HP Capacity : Make-Kirloskar or Equivalent

Repair the Impeller with metaling, grinding,polishing,balancing with true shape Suitable for pump set Make, Make-Kirloskar or Equivalent

Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or Equivalent

Supply only Wear Ring suitable for Pump set, Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or Equivalent .

Supply only Shoulder Ring in CI suitable for PUMP set, Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or Equivalent

Supply only Interstage Ring suitable for Pump set, Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or Equivalent

Supply only Lantern Ring suitable for Pump set, Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or Equivalent

Supply only Gland suitable for Pump set, Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or Equivalent

Supply only DE Bearing suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or Equivalent

Supply only NDE Bearing ,Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or Equivalent

Supply only Deep Groove Ball bearing suitable for 60 HP,Suitable for pump set Make ,Make-Kirloskar or Equivalent

Supply only ANG Contact Ball bearing, Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or Equivalent

Supply only Bearing Cover, Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or Equivalent

Supply only Cover NDE,,Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or Equivalent

Supply only Shaft Sleeve, Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or Equivalent

Supply only Key for Impeller, Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or Equivalent

Supply only Key for Coupling, Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or Equivalent

Supply only Key for Sleeve Nut,,Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or Equivalent

Supply only Shaft Sleeve Nut ,,suitable Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or equivalent

Supply only Round Lock nut ,,Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or equivalent

Supply only Gland Packing, Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or equivalent

Supply only Vent Valve, suitable for Model No DSM/80/36,60 HP Capacity Make: Make-Kirloskar or equivalent .

Supply only Set of O Ring ,,suitable for Model No DSM/80/36,60 HP Capacity Make: Make-Kirloskar or equivalent .

Supply only Flexible ST Hose Pipe, suitable for Model No DSM/80/36,60 HP Capacity Make: Make-Kirloskar or equivalent .

Supply only Ms stud and including replacement of CI gland ,Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or equivalent

Supply only stuffing box suitable for nut and bolts, Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or equivalent

Supply only Cooling PVC flexible of ,Suitable for pump set 60 HP Capacity Make ,Make-Kirloskar or equivalent

All As Above item No-01 but Centrifugal Pump set discharge 45 LPS 60 Mtr head , 30 HP.Make Make-Kirloskar or equivalent .

Supply only Wear Ring suitable for Pump set,30 HP.Make Make-Kirloskar or equivalent

Supply only Shoulder Ring in CI suitable for PUMP set,30 HP.Make Make-Kirloskar or equivalent

Supply only Interstage Ring suitable for Pump set,30 HP.Make Make-Kirloskar or equivalent

Supply only Lantern Ring suitable for Pump set,30 HP.Make Make-Kirloskar or equivalent

Supply only Gland suitable for Pump set,30 HP.Make Kirloskar or equivalent

Supply only Liquid deflector,30 HP.Make Kirloskar or equivalent

Supply only DE Bearing suitable for Capacity30 HP.Make Kirloskar or equivalent

Supply only NDE Bearing suitable for OF Capacity 30 HP.Make Kirloskar or equivalent

Supply only Deep Groove Ball bearing suitable for 30 HP.Make Kirloskar or equivalent

Supply only ANG Contact Ball bearing suitable for 30 HP.Make Kirloskar or equivalent

Supply only Shaft Sleeve suitable for 30 HP.Make Kirloskar or equivalent

Supply only Key for Impeller suitable for 30 HP.Make Kirloskar or equivalent

Supply only Key for Coupling suitable for 30 HP.Make Kirloskar or equivalent

Supply only Key for Sleeve Nut suitable for 30 HP.Make Kirloskar or equivalent

Supply only Shaft Sleeve Nut suitable for 30 HP.Make Kirloskar or equivalent

Supply only Round Lock nut suitable for 30 HP.Make Kirloskar or equivalent

Supply only Gland Packing suitable for 30 HP.Make Kirloskar or equivalent

Supply only Vent Valve suitable for 30 HP.Make Kirloskar or equivalent

Supply only Set of O Ring suitable for 30 HP.Make Kirloskar or equivalent

Supply only Flexible ST Hose Pipe suitable for 30 HP.Make Kirloskar or equivalent

Supply only Cooling PVC flexible of suitable size to the 30 HP Pump Set

All As Above item No-01 but Centrifugal Pump set 15 HP Capacity Make : Kirloskar or equivalent

Supply only Pump shaft Suitable for pump set 15 HP Make Kirloskar or equivalent

Supply only DE/NDE Bearing No 6306 Suitable for pump set 15 HP Make Kirloskar or equivalent

Supply only Shaft bush for 15 HP Pump including removal Make Kirloskar or equivalent

Supply only Shaft coupling Suitable for pump set 15 HP Make Kirloskar or equivalent

Supply only Star Nuts Suitable for pump set 15 HP Make Kirloskar or equivalent

Supply only Impeller for Suitable for pump set 15 HP Make Kirloskar or equivalent

Supply only Air Fan for 15 HP Motor Suitable for pump set 15 HP Make Kirloskar or equivalent

Supply onlyImpeller wear ring Make Kirloskar or equivalent.

Supply only Bearing housing Make Kirloskar or equivalent.

All As Above item No-01 but Centrifugal Pump set 12.5 HP Make : Kirloskar or equivalent

Supply only Pump shaft Suitable for pump set 12.5 HP Make : Kirloskar or equivalent

Supply only DE/NDE Bearing of capacity 12.5 HP Make : Kirloskar or equivalent.

Supply only Shaft bush for 12.5 HP Make : Kirloskar or equivalent including removal from the pumps

Supply only Shaft coupling flexible type 12.5 HP Make : Kirloskar or equivalent in repair and removal from pumps

Supply only Star Nuts for 12.5 HP Make : Kirloskar or equivalent.

Supply only Impeller for 12.5 HP Make : Kirloskar or equivalent

Supply only Mechanical Shaft seal for 12.5 HP Make : Kirloskar or equivalent

All As Above item No-01 but Centrifugal Pump set discharge 26LPS 31 Mtr 10 HP Make : Kirloskar or equivalent.

Supply only Pump shaft Suitable for pump set 10 HP Make : Kirloskar or equivalent.

Supply only DE/NDE Bearing of capacity 10 HP Make : Kirloskar or equivalent.

Supply only Shaft bush for 10 HP Pump including removal from the pumps Make : Kirloskar or equivalent.

Supply only Shaft coupling flexible type 10 HP Capacity in repair and removal from pumps Make : Kirloskar or equivalent.

Supply only Star Nuts for 10 HP Centrifugal pump Make : Kirloskar or equivalent.

Supply only Impeller for 10 HP Centrifugal pump Make : Kirloskar or equivalent.

Supply only Mechanical Shaft seal for 10 HP Centrifugal pump model no KDS 1537TT Make : Kirloskar or equivalent.

Disconnection the electric and pump connection and transportation to work shop for repair and back, taking out burnt winding coils from stator body cleaning of slots with soft wire brush and rewinding by using super enamelled copper wire of existing size & gauge, heat and varnishing complete and M&L winding with super enamel copper wire of existing gauge including greasing, varnishing and alike testing and painting with two cote of synthetic enamel paint, complete for under mentioned electric motors

All as item no 10 here in before but Squirrel cage electric motor of capacity 150 HP 3 phase 415 Volt AC Supply only. (make : kirlosker or equivalent )

All as item no 10 here in before but Squirrel cage electric motor of capacity120 HP 3 phase 415 Volt AC Supply only. ( make : kirlosker or equivalent )

All as item no 10 here in before but Squirrel cage electric motor of capacity100 HP 3 phase 415 Volt AC Supply only. ( make : kirlosker or equivalent )

All as item no 10 here in before but Squirrel cage electric motor of capacity 60 HP 3 phase 415 Volt AC Supply only. (make : kirlosker or equivalent )

All as item no 10 here in before but Squirrel cage electric motor of capacity 30 HP 3 phase 415 Volt AC Supply only. (make : kirlosker or equivalent )

All as item no 10 here in before but Squirrel cage electric motor of capacity 15 HP 3 phase 415 Volt AC Supply only ( make : kirlosker or equivalent )

All as item no 10 here in before but Squirrel cage electric motor of capacity 10 HP 3 phase 415 Volt AC Supply only ( make : kirlosker or equivalent )

All as item no 10 here in before but Squirrel cage electric motor of capacity 5 HP/3 HP 3 phase 415 Volt AC Supply only ( make : kirlosker or equivalent )

All as item no 10 here in before but Open well Submersible motor of capacity 15 HP

All as item no 10 here in before but Open well Submersible motor of capacity 10 HP

M&L for taking down the Slip ring assembly complete with studs made out of copper suitable for 150 HP Capacity Motor and Supply only and fixing the same all as directed.

M&L for taking down the Slip ring assembly complete with studs made out of copper suitable for 120 HP Capacity Motor and Supply only and fixing the same all as directed.

M&L for taking down the Slip ring assembly complete with studs made out of copper suitable for 60 HP Capacity Motor and Supply only and fixing the same all as directed.

M&L for taking down the Carbon bush holder made of bronze suitable for 150 HP Capacity Motor and Supply only and fixing the same all as directed

Supply only Carbon brushes holder made of bronze as per existing sizes per sample suitable for 120 HP Capacity Motor

Supply only Carbon brushes holder made of bronze as per existing sizes per sample suitable for 60 HP Capacity Motor

M&L for taking down the unserviceable Fan Blade upto 20 HP Motor and Supply only fixing the same.

M&L for taking down the unserviceable Fan Blade upto 30 HP Motor and Supply only fixing the same.

M&L for taking down the unserviceable Fan Blade upto 60 HP Motor and Supply only fixing the same.

M&L for taking down the unserviceable Fan Blade upto 100-150 HP Motor and Supply only fixing the same.

Taking up the unserviceable cable of any type, and Supply only , laying and connecting with copper conductor including copper lugs in repair and PVC flexible pipes of suitable sizes of following capacities from panel board to starter to motor for connection.Polycab PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to IS: 694:2010 .

PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to 35 sqmm three core Make : Polycab,Finolex,Havells

PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to .25 sqmm three core Make : Polycab,Finolex,Havells

PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to .16 sqmm three core Make : Polycab,Finolex,Havells

PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to .10 sqmm three core Make : Polycab,Finolex,Havells

Taking down the unserviceable MCCB from the existing panel and Supply only fixing the following type along with connection,providing Lug complete all as directed.

Supply and Fix Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic, Rated Ultimate Short-circuit Breaking Capacity-Ics=100% Icu at 415 .(36 to45 kA rms) MCCB 400 Amps TPN ,Make: Havells,Legrand

Supply and Fix Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic, Rated Ultimate Short-circuit Breaking Capacity-Ics=100% Icu at 415 .(26kA rms) MCCB 250 Amps TPN ,Make: Havells,Legrand

Supply and Fix Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic, Rated Ultimate Short-circuit Breaking Capacity-Ics=100% Icu at 415 .(26kA rms) MCCB 200 Amps TPN ,Make: Havells,Legrand

Supply and Fix Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic, Rated Ultimate Short-circuit Breaking Capacity-Ics=100% Icu at 415 .(26kA rms) MCCB 160 Amps TPN ,Make: Havells,Legrand

Supply and Fix Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic, Rated Ultimate Short-circuit Breaking Capacity-Ics=100% Icu at 415 .(26kA rms) MCCB 100 Amps TPN ,Make: Havells,Legrand

Taking down the unserviceable Starter from the existing panel and Supply fixing the following type along with connection,providing Lug complete all as directed.

Supply and Fixing ML 1.5 FASD For 15 HP To 20 HP Squirrel cage Induction motor Make L&T Cat no SS91855 C&S, Havells or equivalent

Supply and Fixing ML2 FASD For 30 HP Squirrel cage Induction motor Make L&TCat no SS90705 C&S, Havells or equivalent

Supply and Fixing ML4 FASD For 60 HP to 100 HP Squirrel cage Induction motor Make L&TCat no SS90913, C&S, Havells or equivalent

Supply and Fixing ML6 FASD For125 HP to 150 HP Squirrel cage Induction motor Make L&TCat no SS90923, C&S, Havells or equivalent

Supply and Fixing MU-G 15 Fully Automatic Star-Delta Starter for 15/10 HP squirrel cage induction motor Make L&TCat no CS94901, C&S, Havells or equivalent

Supply and Fixing MN 16 DOL Starter for 3/ 5 HP Motor L&TCat no SS94351, C&S, Havells or equivalent

Supply and Fixing ML 1.5 contactor Make: L & T/C&S/Havells or equivalent

Supply and Fixing ML2 Contactor Make: L & T/C&S/Havells or equivalent

Supply and Fixing ML 3/4 Contactor Make: L & T/C&S/Havells or equivalent

Supply and Fixing ML10 Contactor Make: L & T/C&S/Havells or equivalent

S&F in repair Single phase preventer as reqd on site fpr protection of starter complete all as specified and directed Make: L & T/C&S/Havells or equivalent

Disconnecting /dismantling /taking out the defective burnt out VT pump set (Motor/Pump) from jack well and transporting to shop including loading/unloading etc complete and refixing again after necessary repair work of capacity 30 HP Vertical motor. The repair includes followings a) Dismantling/taking out strip opening /inspection complete of the bowl assembly, column pipe assembly, discharge head assembly etc and cleaning/ servicing overhauling all the serviceable spare parts and M &L for painting to exposed surfaces of the column pipe assembly, bowl assembly and discharge head assembly etc with two coats of approved quality anticorrosive water resistant type black paint all as directed including labours for replacement of worn out / unserviceable parts as required and directed by Engr-in-charge. b) Reassembling the complete pump set and re-erection and re-installation at its original position as directed c) Testing and commissioning complete all as directed by Engr-in-Charge. Note:1) The rate quoted by the tenderer includes all cost of necessary nut bots washers and alike if not included in Sch A 2) All new parts required will be measured and paid separately as Supply only only items. 3) The rate quoted by the tenderer also includes cost for taking out pump from the well 20m depth from GL and again lowering the same in its original level and alignment complete. 4)The size of wiring to be incorporated in the work shall be as per existing one hence contractor is requested to visit the site and to get acquainted with site conditions complete. 5)T&P , Transport etc incl in quoted rate .

Suction case bearing for 30 HP/50 HP VT Pump set of Capacity 30 HP.Make:Jyoti or equivalent

Impeller seal ring of Capacity 30 HP.Make:Jyoti or equivalent

Bowl Bearing of Capacity 30 HP.Make:Jyoti or equivalent

Bowl studs (SS) of Capacity 30 HP.Make:Jyoti or equivalent

Line shaft coupling (SS) of Capacity 30 HP.Make:Jyoti or equivalent

Bearing holder assembly of Capacity 30 HP/50 HP.Make:Jyoti or equivalent

Line shaft Bearing (Throdan type) of Capacity 30 HP.Make:Jyoti or equivalent

Column studs /nut bolts (50 Nos) of Capacity 30 HP.Make:Jyoti or equivalent

Stuffing box bush of Capacity 30 HP.Make:Jyoti or equivalent

Lantern Ring of Capacity 30 HP/50 HP.Make:Jyoti or equivalent

Water deflector of Capacity 30 HP.Make:Jyoti or equivalent

Head shaft coupling of Capacity 30 HP/50 HP.Make:Jyoti or equivalent

Head shaft coupling of Capacity 30 HP.Make:Jyoti or equivalent

Column pipe 150 mm of Capacity 30 HPMake:Jyoti or Equivalent

Impeller adjusting nut with screw of Capacity 30 HP.Make:Jyoti or equivalent

Impeller made out of MS with impeller key complete all as directed

Strainer Assembly of Capacity 30 HPMake:Jyoti or Equivalent

Bowl of Capacity 30 HPMake:Jyoti or equivalent

Impeller shaft of Capacity 30 HPMake:Jyoti or equivalent

Impeller collect assembly of Capacity 30 HP.Make:Jyoti or equivalent

Line shaft up to 1.5 mtr and replacement of the Line shaft coupling complete all as directed

Supply only only NDE Bearing No 6307/C3 suitable for 30 HP Make SKF OR equivalent

S&F in repair electric connection box of ebonite materials with Insulators, lugs , protection cover suitable for 30 HP.

M&L for MS work including transportation and using angle iron 50x50 mm 5 mm thick including cutting, welding; Painting and fixing on wall or roof or floor using anchor fastener nut and bolt etc of suitable size as directed by Engr-in-Charge.

All as item no 16 here in before but Vertical Turbine Pump 50 Hp 3 phase 415 Volt AC Supply only ( make : Jyoti )

Suction case bearing for 50 HP VT Pump set of Capacity 50 HP.Make:Jyoti or equivalent

Impeller seal ring of Capacity 50 HP.Make:Jyoti or equivalent

Bowl Bearing of Capacity 50 HP.Make:Jyoti or equivalent

Bowl studs (SS) of Capacity 30 HP.Make:Jyoti or equivalent

Line shaft coupling (SS) of Capacity 50 HPMake:Jyoti or equivalent

Bearing holder assembly of Capacity 50 HP.Make:Jyoti or equivalent

Line shaft Bearing (Throdan type) of Capacity 50 HP.Make:Jyoti or equivalent

Column studs /nut bolts (50 Nos) of Capacity 50 HP.Make:Jyoti or equivalent

Stuffing box bush of Capacity 50 HP.Make:Jyoti or equivalent

Lantern Ring of Capacity 50 HP.Make:Jyoti or equivalent

Water deflector of Capacity 50 HP.Make:Jyoti or equivalent

Head shaft coupling of Capacity 50 HP.Make:Jyoti or equivalent

Head shaft coupling of Capacity 50 HP.Make:Jyoti or equivalent

Column pipe 150 mm of Capacity 50 HPMake:Jyoti or equivalent

Impeller adjusting nut with screw of Capacity 50 HP.Make:Jyoti or equivalent

Impeller made out of MS with impeller key complete all as directed

Strainer Assembly of Capacity 50 HP.Make:Jyoti or equivalent

Bowl of Capacity 50 HP.Make:Jyoti or equivalent

Impeller shaft of Capacity 50 HP.Make:Jyoti or equivalent

Impeller collect assembly of Capacity 50 HP.Make:Jyoti or equivalent

Line shaft up to 1.5 mtr and replacement of the Line shaft coupling complete all as directed

Supply only only NDE Bearing No 6307/C3 suitable for 50 HP Make SKF OR equivalent

S&F in repair electric connection box of ebonite materials with Insulators, lugs , protection cover suitable for 50 HP.

Repairs/rewinding of electric motors of the following . a) Disconnecting /dismantling /taking out the defective burnt out electric motor and transporting to shop including loading/unloading etc complete. b) Strip inspection, the motor, removing & taking out the burnt out windings of stator complete and keeping aside for further disposal all as directed. c) M& L rewinding the stator windings complete by using appropriate gauge super enamelled copper conductor including M& L for "F" class insulation, sleeving, varnishing, baking/over drying , machining as required with brazing filling etc complete d) cleaning / de carburising all the serviceable spare parts of the motor replacing worn out/unserviceable spare parts as required and as directed by Engr-in-Charge( The required spare shall be measured & paid separately under appropriate item of sch "A" as Supply only only ) e) Re-assembling the motor after repairs/rewinding and transporting to pump house including re-erection/ re-installation at its original position and necessary electrical connections all as directed complete. f) Testing and commissioning complete.

30 HP capacity , M/S Jyoti(Kirloskar or equivalent) make, squirrel cage induction motor suitable for VT pump set

50 HP capacity , M/S Jyoti(Kirloskar or equivalent) make, squirrel cage induction motor suitable for VT pump set

Taking out unserviceable air compressor twin lobe blower type 15 HP 1440 RPM, 3 phase 440Volt capacity 300 Cu ft/min from Pump House and carrying out overhauling of air compressor with replacement of following spare parts , greasing, varnishing and alike testing complete of capacity

Bearing suitable 15 HP Blower.

Oil Seal suitable 15 HP Blower.

Oil Packing suitable 15 HP Blower.

Gear Hub suitable 15 HP Blower.

Gear Set suitable 15 HP Blower.

Rotary Set suitable 15 HP Blower.

S&F in replacement Change Over to the following type including removing from the panel.

Change Over open execution type 315 Amp 415 volts complete all as specified and directed Make: L & T/C&S/Havells or equivalent

Change Over open execution type 200 Amp 415 volts complete all as specified and directed Make: L & T/C&S/Havells or equivalent

Taking up unserviceable non return valve of 150 mm dia from existing pipe line and Supply only and fix new non return Valve 150 mm dia complete all as specified and as directed.

Taking up unserviceable non return valve of 200 mm dia from existing pipe line and Supply only and fix new non return Valve 200 mm dia complete all as specified and as directed.

Maintenance/servicing of different capacity and make electrically operated Centrifugal Pump at KINHAI pump house ,including removal/replacement of defective parts, servicing and checking . Service representative minimum for one visit in every Month and 100% serviceable at all time. The scope of work mentioned in below. (i) Replenish the grease.(ii) Check the stuffing box packing. (iii) Check the alignment of the pump set. (iv) Calibrate the measuring instruments.(v)Pressure gauge reading. (vi)(5.1.2 Bearing temperature.(vii) Leakage through stuffing box. (viii) Noise and vibration. (ix) Voltage and current. (x) Check the sealing and cooling connections for leakage (xi) Starter connection. Note:(i) Spare for routine maintenance like Lubricant,Coolent,Packing gland,rupper insertation,Cotten west,Nut's and bolt for coupling/cashing required for maintenance are including the cost of work. (ii)spare required for repair will be measured and paid separately in respective items. (iii)The Pump and Motor capacity under the scope of work is as under(a)150 HP-01 No. (b) 120 HP-01 No (c)100 HP=01 No (d) 75 HP-01 No. (e) VT Pump 30 HP-03 Nos

Maintenance/servicing of different capacity and make electrically operated Centrifugal Pump at MIDC pump house ,including removal/replacement of defective parts, servicing and checking . Service representative minimum for one visit in every Month and 100% serviceable at all time. The scope of work mentioned in below. (i) Replenish the grease.(ii) Check the stuffing box packing. (iii) Check the alignment of the pump set. (iv) Calibrate the measuring instruments.(v)Pressure gauge reading. (vi)(5.1.2 Bearing temperature.(vii) Leakage through stuffing box. (viii) Noise and vibration. (ix) Voltage and current. (x) Check the sealing and cooling connections for leakage (xi) Starter connection. Note:(i) Spare for routine maintenance like Lubricant,Coolent,Packing gland,rupper insertation,Cotten west,Nut's and bolt for coupling/cashing required for maintenance are including the cost of work. (ii)spare required for repair will be measured and paid separately in respective items. (iii)The Pump and Motor capacity under the scope of work is as under(a)60 HP-03 No.

Maintenance/servicing of different capacity and make electrically operated Centrifugal Pump at MAP pump house ,including removal/replacement of defective parts, servicing and checking . Service representative minimum for one visit in every Month and 100% serviceable at all time. The scope of work mentioned in below. (i) Replenish the grease.(ii) Check the stuffing box packing. (iii) Check the alignment of the pump set. (iv) Calibrate the measuring instruments.(v)Pressure gauge reading. (vi)(5.1.2 Bearing temperature.(vii) Leakage through stuffing box. (viii) Noise and vibration. (ix) Voltage and current. (x) Check the sealing and cooling connections for leakage (xi) Starter connection. Note:(i) Spare for routine maintenance like Lubricant,Coolent,Packing gland,rupper insertation,Cotten west,Nut's and bolt for coupling/cashing required for maintenance are including the cost of work. (ii)spare required for repair will be measured and paid separately in respective items. (iii)The Pump and Motor capacity under the scope of work is as under(a)30 HP-02 No.

Maintenance/servicing of different capacity and make electrically operated Centrifugal Pump at A-I pump house ,including removal/replacement of defective parts, servicing and checking . Service representative minimum for one visit in every Month and 100% serviceable at all time. The scope of work mentioned in below. (i) Replenish the grease.(ii) Check the stuffing box packing. (iii) Check the alignment of the pump set. (iv) Calibrate the measuring instruments.(v)Pressure gauge reading. (vi)(5.1.2 Bearing temperature.(vii) Leakage through stuffing box. (viii) Noise and vibration. (ix) Voltage and current. (x) Check the sealing and cooling connections for leakage (xi) Starter connection. Note:(i) Spare for routine maintenance like Lubricant,Coolent,Packing gland,rupper insertation,Cotten west,Nut's and bolt for coupling/cashing required for maintenance are including the cost of work. (ii)spare required for repair will be measured and paid separately in respective items. (iii)The Pump and Motor capacity under the scope of work is as under(a)60 HP-VT PUMP-03 Nos.

Maintenance/servicing of different capacity and make electrically operated Centrifugal Pump at C-II pump house ,including removal/replacement of defective parts, servicing and checking . Service representative minimum for one visit in every Month and 100% serviceable at all time. The scope of work mentioned in below. (i) Replenish the grease.(ii) Check the stuffing box packing. (iii) Check the alignment of the pump set. (iv) Calibrate the measuring instruments.(v)Pressure gauge reading. (vi)(5.1.2 Bearing temperature.(vii) Leakage through stuffing box. (viii) Noise and vibration. (ix) Voltage and current. (x) Check the sealing and cooling connections for leakage (xi) Starter connection. Note:(i) Spare for routine maintenance like Lubricant,Coolent,Packing gland,rupper insertation,Cotten west,Nut's and bolt for coupling/cashing required for maintenance are including the cost of work. (ii)spare required for repair will be measured and paid separately in respective items. (iii)The Pump and Motor capacity under the scope of work is as under(a)40 HP-01 No.(b)20HP-02Nos

Maintenance/servicing of different capacity and make electrically operated Centrifugal Pump at C-I pump house ,including removal/replacement of defective parts, servicing and checking . Service representative minimum for one visit in every Month and 100% serviceable at all time. The scope of work mentioned in below. (i) Replenish the grease.(ii) Check the stuffing box packing. (iii) Check the alignment of the pump set. (iv) Calibrate the measuring instruments.(v)Pressure gauge reading. (vi) Bearing temperature.(vii) Leakage through stuffing box. (viii) Noise and vibration. (ix) Voltage and current. (x) Check the sealing and cooling connections for leakage (xi) Starter connection. Note:(i) Spare for routine maintenance like Lubricant,Coolent,Packing gland,rupper insertation,Cotten west,Nut's and bolt for coupling/cashing required for maintenance are including the cost of work. (ii)spare required for repair will be measured and paid separately in respective items. (iii)The Pump and Motor capacity under the scope of work is as under(a)15 HP-03 No.

Maintenance/servicing of different capacity and make electrically operated Centrifugal Pump at A-II pump house ,including removal/replacement of defective parts, servicing and checking . Service representative minimum for one visit in every Month and 100% serviceable at all time. The scope of work mentioned in below. (i) Replenish the grease.(ii) Check the stuffing box packing. (iii) Check the alignment of the pump set. (iv) Calibrate the measuring instruments.(v)Pressure gauge reading. (vi) Bearing temperature.(vii) Leakage through stuffing box. (viii) Noise and vibration. (ix) Voltage and current. (x) Check the sealing and cooling connections for leakage (xi) Starter connection. Note:(i) Spare for routine maintenance like Lubricant,Coolent,Packing gland,rupper insertation,Cotten west,Nut's and bolt for coupling/cashing required for maintenance are including the cost of work. (ii)spare required for repair will be measured and paid separately in respective items. (iii)The Pump and Motor capacity under the scope of work is as under(a)100 HP-02 No. (a)60 HP-02 No. (a)40 HP-01 No.

M/S kirpan Enterprises

Shri Sai Electricals

Crown Chemicals