PROVN OF CHAIN LINK FENCING AND APPROACH PATH AROUND STP PLANT, OUTDOOR TRANSFORMER, DG SET ,CHILDREN PARK AND SHED FOR STP AT SONARI JUNGLE PORBANDAR

Amount

SCHEDULE 'A'

Excavating in trenches n exc 1.5 m wide & n exc 1.5 m depth and getting out soft/disintegrated rock.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed.

M&L Reinforced cement concrete 1:1.5:3 type A1 (20 mm graded aggregate) in foundation, including raft,footing, foundation beams, plinth beams, base of columns, under reamed piles complete all as specified and as directed.

M&L Reinforced cement concrete 1:1.5:3 type A1 (20 mm graded aggregate) Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for Formwork to flat sides with fair finish surface of concrete foundations, footings, bases of columns, raft and raft beams sides and soffits (if any) of foundation and plinth beams, under reamed piles and similar work; vertical or to batter

M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions with rough finish surface

Mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips.

-ditto- all as per item No. above, but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders

M&L joint channel angle or tee section, fixed independently fastening and fixing complete using Fe-410-W(Gde E-250) quality-A

S&F PVC coated 4 mm dia galvanised steel wire mesh of aperture 100 x 100 mm made up into mattresses or cages, lapped, wired and laid in position, incl closing after filling complete including line wire complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm and n exc. 10 cm long with 5 to 10mm dia of neck

S&F Mild steel bolts,purpose made with hexagonal or square head one end and screwed the other, or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut. exc 30 cm long ,with Exc 12 mm and n.exc 20 mm dia of neck

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concreteand screwing etc. wind ties for roof including securing bolts etc complete

M&L Preparation of new steel surface of any discription exc 10 cm width or girth one coat of red oxide and two coat of synthetic enamal paint

M & L Porbandar stone masonry, well bonded, bedded and solidly hearted built in CM 1:6 all as specified and as directed by Engineer-in-charge.

S&F Roof trusses (rolled or tubular section), trussed, purlins,post, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel,or flat sections), including distance piece, cleats etc fixing complete using Fe-410-W( Gde E-250) quality-A

S&F Plates (plain or chequered) , channels, square cut or notched ( ordinary and counter sunk) forming holes, without any attachment etc complete using Fe-410-W( Gde E-250) quality-A

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm as in soft/disintegrated rock.

Removal of excavated rocks exc. 500 m but n.exc 1.5 km and depositing where directed at level n exc. 1.5M above the starting point. all as specified.

M&L for rendering 10 mm thick on fair face of brick work or concrete surfaces in CM 1:6 finished even and smooth wiithout using extra cement.

M&L for preparation of new plastered surfaces of wall and applying two coats of weather proof acrylic exterior emulsion paint over a coat of acrylic primer all as per the manufacturers instructions, complete all as specified and directed by Engr-in-charge.

JAY BHARAT METAL SUPPLIERS

RAJESH ENTERPRISE

Nitesh Enterprise

shree chamunda enterprise

K K Construction Co

BABUBHAI BHIMABHAI PANDAVADRA

K B N TRADERS

KRISHNA ENGINEERING