Widening Strengthening of Meerut Badaun road (SH-18) From (Km. 78.00 to 116.370)

Amount

Cleaning jungle including up rooting of rank, vegetations grass, push, wood trees and samplings of grith upto 30 cms.measured at a height of 1 M. above ground level and removal of rubbish up to a distance of 50M. out side the periphery of area cleared of area cleared including supply of all materials labour, tools & Plants etc required for proper complition of work including all taxes but excluding G.S.T

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M.in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. including supply of all materials labour, tools & Plants etc required for proper complition of work. including all taxes but excluding G.S.T

Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplusearth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. Where machine can not reach/move including supply of all materials labour, tools & Plants etc required for proper complition of work. including all taxes but excluding G.S.T

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. MORT&H Specification 305 Sr No 3.18 (Carted earth) including supply of all materials labour, tools & Plants etc required for proper complition of work.including all taxes but excluding G.S.T

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. MORT&H Specification 401 Sr No 4.1 including supply of all materials labour, tools & Plants etc required for proper complition of work. including all taxes but excluding G.S.T

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. MORT&H Specification 406 Sr No 4.14 including supply of all materials labour, tools & Plants etc required for proper complition of work. including all taxes but excluding G.S.T

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC and ordinary Portland Cement @ 1 % By weight of Mix and 3.5 % Emulsion SS2 By weight of Mix in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the designed ITS (Indirect Tensile Strength)including all taxes but excluding G.S.T

Providing and applying tack coat with bitumen V.G.-10 using Bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. MORT&H Specification 503 including supply of all materials labour, tools & Plants etc required for proper complition of work. Including cost of materials including all taxes but excluding G.S.T

Providing and laying dense graded bituminous macadam Grading 2 with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder V.G.-40 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects.including all taxes but excluding G.S.T

Providing and applying tack coat with bitumen V.G.-10 using Bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. MORT&H Specification 503 including supply of all materials labour, tools & Plants etc required for proper complition of work. Including cost of materials including all taxes but excluding G.S.T

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binderV.G.-40 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 including supply of all materials labour, tools & Plants etc required for proper complition of work. Including cost of materials including all taxes but excluding G.S.T

Plain Cement Concrete (grade M 15) in Open Foundation complete as per Drawing and Technical Specifications including supply of all materials labour, tools & Plants etc required for proper complition of work. (MORTH 12.08,1500,1700 & 2100 A Case II ) Including cost of materials including all taxes but excluding G.S.T

Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 including supply of all materials labour, tools & Plants etc required for proper complition of work. (MORTH 12.08 E case III) including all taxes but excluding G.S.T

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications MORT&H Specification 1600,2200 Sr No 13.6 including supply of all materials labour, tools & Plants etc required for proper complition of work. including all taxes but excluding G.S.T

Cement Concrete with 4 cm gauge approved stone ballast coarse sand & cement in the proportion of 8:4:1 including supply of all materials labour,T&P plants etc. required for proper completion of the work including all taxes but excluding G.S.T

Supply and laying of NP-3 s/s 1000mm dia Hume pipe culvert including cost of hume pipe, cartage, fixing of proper alignment including supply of all materials labour, tools & Plants etc required for proper complition of work. including all taxes but excluding G.S.T

Supply and laying of NP-3 s/s 600mm dia Hume pipe culvert including cost of hume pipe, cartage, fixing of proper alignment including supply of all materials labour, tools & Plants etc required for proper complition of work.including all taxes but excluding G.S.T

Supply and laying of NP-3 s/s 350mm dia Hume pipe culvert including cost of hume pipe, cartage, fixing of proper alignment.i including supply of all materials labour, tools & Plants etc required for proper complition of work. including all taxes but excluding G.S.T

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications as per MORTH specification clause No. 1300 & 2100 Sr No 13.1. including supply of all materials labour, tools & Plants etc required for proper complition of work.including all taxes but excluding G.S.T

12 mm thick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work including supply of all materials labour, tools & Plants etc required for proper complition of work. (MORTH 13.3,1300 & 2200) including all taxes but excluding G.S.T

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing MORT&H Specification 601Sr No 6.1 including supply of all materials labour, tools & Plants etc required for proper complition of work. including all taxes but excluding G.S.T

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 410 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing MORT&H Specification 602Sr No 6.2 including all taxes but excluding G.S.T

Jeet Construction

M/s AP & Associates

RAJEEV KUMAR CONTRACTOR PVT LTD

M/S A B INFRAZONE PRIVATE LIMITED

M/s Raj Laxmi Enterprises

Preeti Buildcon Private Limited