REPAIRS TO FLOOR ROOF SANITARY FITTINGS JOINERIES AND CERTAIN OTHER ITEMS IN A AND B AREA INCLUDING INHS SANJIVANI AREA AT NAVAL BASE KOCHI UNDER GE NW KOCHI

Amount

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) compleate all as specified and directed by Engr-In-Charge

M&L PCC 1:4:8 type D2 100 mm thick using 40 mm graded aggregates as in sub base of floor compleate all as specified and directed by Engr-In-Charge.

M&L PCC 1:3:6 type C2 75 mm thick using 40 mm graded stone aggregate finished surface even and smooth without using extra cement compleate all as specified and directed by Engr-In-Charge.

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm spreading and levelling in layers n exc. 25 cm thick andr well ramming including watering as required compleate all as specified and directed by Engr-In-Charge.

S&F Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness ,M-35 Grade with grey cement and pigment compleate all as specified and directed by Engr-In-Charge.

M&L cement concrete type B-1, 1:2:4 using (20mm graded stone aggregate) 40mm thick as in flooring compleate all as specified and directed by Engr-In-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises compleate all as specified and directed by Engr-In-Charge.

M & L for glazed ceramic colored designed straight edge tiles 7mm thick, size of tile n.exc 450mmX300mm on vertical surfaces such as skirting or dados laid over cement mortar backing coat set and jointed with neat cement slurry and pointed in white or coloured cement to match incl Rendering in CM 1:4, 10mm thick for fixing tiles on skirting/dado compleate all as specified and directed by Engr-In-Charge.(Make-Johnson/Somany/Kajaria)

M & L for Non Skid ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm on floors laid over cement mortar screeding set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles incl 15mm thick screed bed or bedding layer of mortar in CM 1:6 compleate all as specified and directed by Engr-In-Charge.(Make-Johnson/Somany/Kajaria)

M & L for Non Skid ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm on floors laid over cement mortar screeding set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles incl 15mm thick screed bed or bedding layer of mortar in CM 1:6 compleate all as specified and directed by Engr-In-Charge.(Make-Johnson/Somany/Kajaria)

M & L for Non Skid ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm on vertical surfaces as skirting including 10mm thick cement plaster 1:3 and pointed in white or coloured cement to match the colour of tiles all as specified and directed (Make-Johnson/Somany/Kajaria)

S&F vitrified Ceramic tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm, in floors and dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer of mortar in CM 1:6 compleate all as specified and directed by Engr-In-Charge. (Make-Johnson/Somany/Kajaria)

S&F vitrified Ceramic tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm, in vertical surfaces as skirting including 10mm thick cement plaster 1:3 and pointed in white or coloured cement to match the colour of tiles compleate all as specified and directed by Engr-In-Charge. (Make-Johnson/Somany/Kajaria)

Demolition of PCC block masonry built in cement mortar including all quoins, arches , pillars etc compleate all as specified and directed by Engr-In-Charge.

M&L pre cast cement concrete block masonry 1;3;6 with solid blocks exec 10 cm in width and setting in CM1;6 compleate all as specified and directed by Engr-In-Charge. (Make-Alwaye/perumbavoor)

Taking down cement plaster of any description on brick or stone walls, ceiling including racking out joints, hacking for key, scrubbing down with water etc compleate all as specified and directed by Engr-In-Charge.

M&L for 15mm thick plaster in CM 1;4 finished even and smooth without using extra cement compleate all as specified and directed by Engr-In-Charge.

M & L for applying two coat of cement base paint over a coat of primer on plastered surfaces of walls incl preparation of surface compleate all as specified and directed by Engr-In-Charge. (Make: Asian Paint / Nerolac/ Berger)

M & L rendering 10 mm thick on fair faces of brick work in CM 1:6, finished even and smooth without using extra cement compleate all as specified and directed by Engr-In-Charge.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer compleate all as specified and directed by Engr-In-Charge.

M&L for rendering 5mm thick 1:3 CM on fair faces of concrete surfaces on ceiling, all as specified and as directed by Engineer-in-Charge.

M&L for three coats of white wash to newly plastered surfaces of ceiling including preparation of surface all as specified and as directed by Engr-in-Charge.

M&L for cutting grinding of terrazzo tiles or kota stone floor etc with grinding machine after filling the pits and holes with matching cement and polishing with 3 step grinding stone complete on floor/ vertical surface of wall dado, skirting etc complete all as specified and directed by Engr-in-Charge

S & F Vitreous china wash down water closet pan(EWC), any color, pedestal pattern fixed in repairs compleate all as specified and directed by Engr-In-Charge.

S&F in repairs vitreous china squatting pan orissa pattern (IWC) size 580x440mm white with integral foot rest including provision of lime concrete bedding compleate all as specified and directed by Engr-In-Charge.

S & F in repairs Plastic seat cover, any color closed pattern with flat bottom & cover and mild steel chromium plated or aluminium hinges, etc including fixing bolts compleate all as specified and directed by Engr-In-Charge.

S & F PVC valveless, syphonic action type, flushing cistern, low level, any color, with inlet ball valve, float and handle including brackets and all connections, ISI marked fixed in repairs compleate all as specified and directed by Engr-In-Charge.

S & F in repairs PVC connection 15mm bore 45cm long with brass coupling compleate all as specified and directed by Engr-In-Charge.

S&F in repairs white glazed vitreous china WHB flat back size 550x400 mm including CI bracket etc incl PVC waste pipe 40mm bore 90cm long with coupling spring type compleate all as specified and directed by Engr-In-Charge.

S&F vitreous china urinal bowl flat back of size 465 X 355 X 265mm white alongwith waste coupling including fixing plugs, beding urinal against wall in CM 1:2 securing urinals to plugs including 60mm long brass screws, pointing around urinal back in cement as in repairs compleate all as specified and directed by Engr-In-Charge.

S&F in repairs 125 mm dia stainless steel grating compleate all as specified and directed by Engr-In-Charge.

S&F of stop valves cast copper alloy screwed down high pressure screwed at the ends for iron pipe or union with crutch or butterfly handle of 15mm dia including GI Nipple and Socket as in repair compleate all as specified and directed by Engr-In-Charge.

All as per srl item above but fancy type chromium plated with long shank and cup (concealed type) as in repair compleate all as specified and directed by Engr-In-Charge. Make-Parryware

S&F of Brass Chromium plated waste coupling 32 mm dia as in repairs compleate all as specified and directed by Engr-In-Charge.

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement as in repairs compleate all as specified and directed by Engr-In-Charge.

S&F 32 mm dia size PVC waste pipe with cup head for Wash Hand Basin as in repair compleate all as specified and directed by Engr-In-Charge.

S&F stainless steel sink with draining board made out of 1.0mm thick shet for kitchen with plug , washers waste pipe , cast iron cantilever brackets connecting union over all size 915X460mm with bowl size 410X330X160mm compleate all as specified and directed by Engr-In-Charge. Make Nirali/Jayna/Coment as in repair.

S & F Pillar tap 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down fixed in repairs compleate all as specified and directed by Engr-In-Charge.

S&F CP tubular towal rail 20mm dia , 600mm long all as specified as in repair.(Brass chromium plated), Make-KAG Aqua or equilvent compleate all as specified and directed by Engr-In-Charge.

S&F CP Brass concealed stop cock knob with caps and brass screw as in repairs compleate all as specified and directed by Engr-In-Charge. Make-Parryware

Taking down chowkats or frames not exe 1.5Sqm each with shutters (without taking off shutters from the frames) compleate all as specified and directed by Engr-In-Charge.

Taking down chowkats or frames exe 1.5Sqm but n exe 4 Sqm each with shutters (without taking off shutters from the frames) compleate all as specified and directed by Engr-In-Charge.

Taking down shutters of any description n exc 1 sq. m each compleate all as specified and directed by Engr-In-Charge.

Taking down shutters of any description but exc 1 sq. m and n exc 2 sq. m each compleate all as specified and directed by Engr-In-Charge.

Taking down shutters of any description n exc 1 sq.m each and refixing in same opening after necessary repair all as specified &directed by Engr-in-Charge

Taking down shutters of any description exc 1 sq.m and n.exc 2 sq.m each and refixing in same opening after necessary repair all as specified &directed by Engr-in-Charge

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified &directed by Engr-in-Charge.

S&F 35 mm thick plain framed panelled shutter (any number of panels) of 2nd class H.W with panels of timber flat on both sides or of venerred particle boards medium density, wood particle board with commercial face veeners compleate all as specified and directed by Engr-In-Charge.

S&F Glazed and skeleton shutters for doors 35mm thick 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted compleate all as specified and directed by Engr-In-Charge.

S&F Glazed and skeleton shutters for windows and ventilators 30mm thick 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkat all as specified &directed by Engr-in-Charge.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides for cubboards and similar works etc compleate all as specified and directed by Engr-In-Charge.

M&L applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, compleate all as specified and directed by Engr-In-Charge.

M&L applying two coat of synthetic enamel paint on old decorated wooden surfaces exc 10 cm width or girth, including preparation of surfaces, compleate all as specified and directed by Engr-In-Charge.

M&L powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc compleate all as specified and directed by Engr-In-Charge.

S&F Anodised aluminium window and ventilator shutters side hung type without sash bars, aliminium sections weigning 0.55 kg /m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, andoised aluminium fittings such as peg stays 150 mm long (1 No) hinges type B-21 100 mm long (2 No) suitable handle (1 No) with powder coated of any colour (thickness of powder coating not less than 50 micron) compleate all as specified and directed by Engr-In-Charge.

S&F 4 mm thick Figured glass, pin head type and glazing clip & rubber gaskets etc n. exc 0.5 sqm in each pane compleate all as specified and directed by Engr-In-Charge.

S & F sheet glasses,plain 4.00mm thick glazing all with glazing clip & rubber gaskets etc n. exc 0.5 sqm in each pane compleate all as specified and directed by Engr-In-Charge.

S& F powder coated anodised Alluminium 5mm dia hexagonal channel for grill fixed to aluminium frame with aluminium beading compleate all specified and directed by Engr -in- charge. Make JINDAL oe equivalent section HIDALCO/INDALCO /MS AJIT IND PVT LTD.

S&F in Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing compleate all as specified and directed by Engr-In-Charge.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site compleate all as specified and directed by Engr-In-Charge.

S/F 100mm stainless steel butt hinges,medium wt cold rolled compleate all as specified and directed by Engr-In-Charge. ( Make:Crown / Jyothi / Argent )

Do as above item 62 here in above but 75mm compleate all as specified and directed by Engr-In-Charge. ( Make:Crown / Jyothi / Argent )

Aluminium alloy, anodised, sliding door bolt 200mmwith hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed by Engineer -in- Charge.

S&F in repaire Aluminium Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed by Engr-in-Charge.

S & F Hasp staple 100mm brass safty type with mild steel hinge pin including bolt to hinge plate fixed with screws complete all as specified and as directed by Engineer -in- Charge.

S&F 150mm long Aluminium anodised, barrel tower Bolts of extruded section and fixed all as specified and directed by Engr-in-Charge

All as per item No.60 above but 100mm long Aluminium anodised, barrel tower Bolts complete all as specified and as directed by Engineer -in- Charge.

S&F 125mm long Aluminium anodised handle complete all as specified and as directed by Engineer -in- Charge.

All as per item above but 100mm size aluminium anodised handle complete all as specified and as directed by Engineer -in- Charge.

S & F in repaire for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer -in- Charge.

S&F in repair aluminium alloy wire coth galvanized 0.45mm nominal dia and average width of aperture 1.18 mm fixed with tinned tack or galvanized wire staple including all cuttings, wastage etc complete all as specified and as directed by Engineer -in- Charge.

S & F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer -in- Charge.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engineer -in- Charge.

S&F MS hold fast made of FI 25x3mm all as specified and directed by Engr-in-Charge

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate for fixing hold fast including necessary formwork all as specified and directed by Engr-in-Charge.

M&L for repair to steel window/ ventilator in any position by casing of hinges including oiling, cleaning, welding as necessary including cutting and making good of old jambs etc to match with the existing for smooth functioning of shutters complete all as directed (The rate quoted are deemed to be inclusive of carrying out repairs from external external side of multistorey bldgs) complete all as specified and as directed by Engineer -in- Charge.

M&L for repair to aluminium doors of size n.exc 2 sqm each and making good and functional including changing of pivot,repairs to lock,handle,rubber beadings etc complete all as specified and as directed by Engineer -in- Charge.

Hacking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc,including making good breakages in taking out and handling removing to store or stacking for reuse, all as specified and as directed by Engineer-in-Charge.

S & F sheet glasses,plain 5.50mm thick glazing all with aluminum beading, glazing pin etc, or with oil putty in square exc .5 Sqm in each pane complete all as specified and as directed by Engineer -in- Charge.

S&F 4mm thick Sheet glass one side frosted, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F 4mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge.

Dismantling of cast iron or reinforeced concrete drain pipes, jointed in cement mortar and taking out of walls complete all as specified and as directed by Engineer -in- Charge.

S&F 75 mm PVC (SWR) pipes single scoketed, in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer -in- Charge.

S&F 110 mm PVC (SWR) pipes single scoketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC bends 75 mm dia compleate all as specified and directed by Engr-In-Charge.

S&F PVC(SWR) bends 110 mm dia compleate all as specified and directed by Engr-In-Charge.

S&F PVC (SWR) junction single (single T) queal or unequal 75 mm dia with access door compleate all as specified and directed by Engr-In-Charge.

S&F PVC (SWR) junction single (single T) queal or unequal 110 mm dia with access door compleate all as specified and directed by Engr-In-Charge.

Dismantling wall & ceiling boards of any description as in panelling ceiling, partition, cub boards etc incl cover fillets in any surfaces compleate all as specified and directed by Engr-In-Charge.

M&L for 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium frameworkwith screwsting ceiling with gypsum board & its frame workin ceiling compleate all as specified and directed by Engr-In-Charge.

M&L for Anodised aluminium snap grid frame work for false ceiling compleate all as specified and directed by Engr-In-Charge.

M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long compleate all as specified and directed by Engr-In-Charge.

M&L for two coat of white wash on ceiling compleate all as specified and directed by Engr-In-Charge.

Demolition of cement concrete (unreinforced)of any description and in any position not otherwise specifically provided and pinted in any mortar compleate all as specified and directed by Engr-In-Charge.

M & L PCC 1:3:6 type C2 using 20mm graded stone aggregate, 75mm thick, as in plinth protection, path, pavings etc incl making impressions of expanded metal, whilst the concrete is green compleate all as specified and directed by Engr-In-Charge.

Anaswara Constructions

T L ALOSIOUS

HEAVEN ENGINEERS AND CONTRACTORS

Vidya constructions