Enquiry No I-12825/WEB/CONT/BT

Amount

Termination of 1.1KV grade cable 3.1/2C x 95 Sq.mm to 120 Sq.mm through suitable glands & lugs. The glands & lugs shall be supplied by the Contractor.

Digging of cable trench and its refilling by excavated soil, sand and bricks after laying the cables. Size of trench 300mm x 950 mm depth.

Repair of Below 250W light fittings by replacing reflectors, bulbs, choke & ignitor. The material shall be supplied by HCL/ICC. The job includes opening & reinstallation of light fixture.

Installation/testing & commissioning of TPN Switches above 160A to 250A.

Installation, testing & commissioning of 63A TPN S/F unit

Replacement of 15/20A tumbler switches/ toggle switches or Rotary switches. From the existing lighting/ welding DBs or any other place necessary painting of the DBs after tit bit repair

Termination of 11KV XLPE/PILC cable by M.Seal termination kit/heat shrink type & straight through jointing (M.Seal kit). The termination/straight joint kit to be supplied by the contractor. Termination of 11KV cable 3Cx 120-185 Sq.mm.

Laying/Re-routing of 1.1KV grade PVC armoured cable of following sizes:- 3.1/2C x 150 Sq.mm to 300 Sq.mm

Termination of 1.1KV grade cable through suitable glands & lugs The glands & lugs shall be supplied by the Contractor. 3.1/2C x 150 Sq.mm to 300 Sq.mm.

Laying/Re-routing of 1.1KV grade PVC armoured cable of following sizes:- 4C x 16 Sq.mm to 70 Sq.mm

Laying/rerouting (if necessary) of 11KV PILC/XLPE cable of 3C x 120 -150 Sq.mm.

Dismantling of any damaged structure, platform, cable tray or column related to electrical equipment, including pipe line of A.C etc.

REPLACEMENT/CONNECTION /REPAIR OF 7/8" THICK ACSR CONDUCTOR WIRE LOOP (JUMPERS)/ CAPACITORS/INSULATORS/ LIGHTENING ARRESTERS ETC. ON OVERHEAD STRUCTURE OF 33 KV YARD.

LAYING, STRINGING & TENSIONING OF 33 KV OVERHEAD ACSR CONDUCTOR/ EARTHING CONDUCTOR AT 10 TO 12 MTR. POLE HEIGHT.

MISC. PREVENTIVE MAINTENANCE /BREAKDOWN REPAIR JOBS OF ISOLATORS AT 4 TO 10 MTR. HEIGHT,BUS BARS,CONNECTION JOINTS/ NUT-BOLTS & SHEET REPLACEMENT/CHANGING OF ACSR WIRE JUMPERS

MAINTENANCE OF 33 KV/11 KV TRANSFORMER.

MAINTENANCE OF 11 KV/440 V TRANSFORMER.

MAINTENANCE OF 33 KV OR 11KV ISOLATORS.

MAINTENANCE OF 33 KV BUS-BAR.

ON LINE OIL FILTRATION

REPLACEMENT OF H.T. LINK FUSE

REPLACEMENT OF 11 KV CAPACITORS.

DISMANTLING AND REPLACEMENT OF OLD DAMAGED T-CLAMP/U CLAMP/BUSBAR CLAMP/CONNECTOR ETC.WITH NEW ONE AND TIGHTENING WITH G.I NUTS , BOLTS & SPRING WASHER ETC.

OUTDOOR/INDOOR TYPE END TERMINATION OF 33 KV GRADE XLPE/PILC CABLE BY HEAT SHRINK JOINTING KIT/ M-SEAL TERMINATION KIT, SIZE :3CX 240 TO 300 SQ. MM XLPE/PILC AL.

OPERATION AND MONITORING OF 33 KV BANALOPA SUB-STATION ON PER MONTH BASIS

Operation & monitoring of 33KV MBR sub-station per month basis

REPLACEMENT/NEW-INSTALLATION OF CEILING FANS INCLUDING THEIR CONNECTION IN MOUBHANDAR QUARTERS/OFFICES OF ICC. JOB INCLUDES SHIFTING OF FANS FROM DEPTT AND RETURN OF OLD FAN TO DEPTT

33KV OVER HEAD LINE PATROLLING. TRIMMING OF TREES BESIDE THE LINE FORM DVC YARD TO MBR 33KV S/S and Surda 33KV O/H LINE. DETAILS AS PER ANNEXURE

PAINTING OF 33KV STRUCTURE & POLES. DETAILS AS PER SCOPE OF JOB

Excavation pit & Grouting of new Street light poles (upto 13mtr height) with concrete. Size of pit: 1.5 mtr depth, 1Mtr width. The detail job as per annexure.

ELECTRICAL WIRING/CABLING THE DETAIL JOB AS PER ANNEXURE

REPLACEMENT, ADJUSTMENT & REPAIR OF BROKEN OR BENT BRACKET OF 33 KV H-POLES (DP)/TOWERS OF 10 TD 12 MTR. HEIGHT

STRAIGHTENING OF EVENTUALLY BENT 10 TO 12 MTR. HIGH H-POLES (DP)/TOWERS OF 33KV LINE

FABRICATION & FIXING OF CROSS (X) BRACING/CROSS ARMS & THEIR ASSOCIATED FIXING MATERIALS.

FABRICATION, FIXING & ERECTION OF H-POLE (DP) FOR OVERHEAD 33 KV LINE ALONG WITH BRACKETS, INSULATORS ON THE POLE & STAY WIRE ARRANGEMENTS CIVIL JOB RELATED TO POLE ERECTION IS UNDER SCOPE OF CONTRACTOR

FABRICATION OF BRACKETS & THE ASSOCIATED FIXING CLAMPS.

FORMATION, WEARING & ERECTION OF GUARD WIRE BELOW OVERHEAD TRANSMISSION LINE.GUARD WIRE TO BE BRIDGED ALONG SPAN LENGTH BY THREE PARALLEL WIRES & CROSS WIRE OF APPROX. 3MTR. LENGTH AT A DISTANCE OF EVERY 2 MTR

MAITENANCE/REPLACEMENT OF P.T. (OIL IMMERGED).

OVERHAULING OF 11 KV, MOCB/VCB.

REPLACEMENT OF OLD DAMAGED AL. CONDUCTOR PIPE WITH NEW ONE, EACH LENGTH 4 MTR. OD 3", WITH AL. CLAMP & TIGHTENING WITH G.I. NUT, BOLTS & SPRING WASHERS, (AL. PIPES, CLAMPS, NUTS, BOLTS & WASHERS WILL BE SUPPLIED BY HCL/ICC FREE OF COST)

Supply of complete material of stay set & associated civil job along with fixing of stay wire across H Poles/tubular pipe poles/towers of 33KV O/H transmission line civil job includes excavation of stay pit, fixing of stay rod & their concr

PCC concreting of damaged foundation of H Pole/tower of overhead transmission line. Job includes excavation in any type of soil at base of H Pole/tower, dismantling of damaged concrete foundation, shuttering & PCC concreting mix (1:2:4).

Laying/Re-routing of 1.1KV grade PVC armoured cable of sizes 3.1/2C x 95 to 120 Sq.mm. PVC armoured cable

CONSTRUCTION OF 3.5 M DEEP EARTH PITS NEARBY H POLE OR TOWER OF OVERHEAD LINE ALONG WITH SUPPLY OF ALL DESIRED MATERIAL FOR THEIR CIVIL JOB AS WELL AS FOR EARTHING CONNECTION WITH H POLE & O/H EARTHING WIRE.

Termination of 11KV XLPE/PILC cable by M.Seal termination kit/ heat shrink type and straight through jointing (M.Seal type). The termination/straight through jointing kit shall be supplied by the Contractor. Size 3C x 150 Sq.mm.

Repair of 250W HPMV & above fittings by replacing reflectors, bulbs, choke & ignitors. The materials shall be supplied by HCL/ICC. The job includes opening & reinstallation of light fixture.

PAL ENGINEERING ENTERPRISES