Mtc of EI work at Purta Bhawan-Repair renovation and load balancing of existing dist system and replacement of diff type fittings along with proper arrangement the existing wiring system on existing cable tray and allied EI work -as and when required

Amount

Dismantling charges for existing old dist. Wiring, Different type distribution board, computer board, Switch board, fittings, fixture etc. as per direction of EIC.

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. a) Average run 8 mtr

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) do-----do----as per GS.. On Board

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works 25 mm size

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe/ PVC Rigid Conduit and by the prelaid GI fish wire and making necy. connection as required 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC(For SPN DB)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 40 mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required of 4x16sqmm+2x10 sqmm ECC (from VTPN to HTPN) ( make: Gloster/ Polycab/Havells/as per direction of EIC).

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2x22/0.3 (1.5 sqmm) + 1x22/0.3 (1.5 sqmm) (For Separate Board)

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) (For Computer Board Power Board, AC indoor unit)

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC (AC point)

Finishing of the PVC insulated wire ends by socketing with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 1.5 sq.mm

Supply of following XLPE insulated & Sheathed cables for Working Voltage up to 1100 Volts of following sizes [Make- Havells/Polycab/Gloster/RR Kabel/KEI/MescabAs per choice of EIC] 4 core 70 sq. mm. multy stranded Aluminium conductor Armoured cable.

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/4 / 3.5)Core as per GS. 4 Core 70 Sq. mm

Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting as to GS.

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 160 A TPN SFU [Make-L&T/Havells/Siemens]

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 8 way VTPNDB( Make: Legrand/ L&T/ABB/ Siemens) Incommer: 415v, 25k/35k ,125A 4 pole MCCB ....1nos. Outgoing: 415V, 63A C curve, 10K ,TP MCB .... 4 nos 415V, 40A C curve, 10K ,TP MCB .... 4 nos

Supplying and fixing double-door Horizontal TPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. 8 Way [Make- Legrand/L&T/ABB]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. 2+12 Way [Make- Legrand/L&T/ABB]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as per GS. 63 A FP [Make- Legrand/L&T/ABB]

40 A DP [Make- Legrand/L&T/ABB]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection as per GS. 6-32 A SP [Make- Legrand/L&T/ABB]

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 1 x 6 A Separate Board

Supply & Fixtng of Computer board (Modular typel:- Supply & Fixing 240 V, 3 nos.6A, & 1 no.20A Modular type plug socket with separate 3 nos. 6 A & 1 no. 20A Modular type switch, indicator & 20A Modular type SP MCB 25A on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl.S&Fswitch board and cover plate and maling necy. connections with PVC Cu wire and earth continuity wire etc.(Legrand Myrius/ Crabtree/ Siemens 3 x 6 A + 1 x 16 A Computer Board

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board as per GS. 1 x 16 A Power Socket Board

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board as per GS. 25 A, 3 pin Modular type plug socket

Supply and fixing of OLP3+ 25A single phase AC starter on 4 module GI box with supply & fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), with 25A modular type plug top with indicator and switch with 2 Module GI Modular type switch board widl top cover ptate flushed in wall and making necy.connection wire PVC Cu wire and earth continuity wire as per direction of EIC.

S & F Timer Control unit with 12-way SPN DB Box(Mk.- L&T/ Crabtree / Legrand/Siemens/ABB) (For Exhaust Fans of Toilet Block) 12 way SPN DB or Timer DB- 1 no 40A DP MCB Isolator-1 no Digital 24 hrs.Time switch- I no 324 2-pole power contactor-1no Centre off 2-way toggle switch-1 no 32A Barrier type Terminal -1 no LED indicating lamp-1 no 6 Amp SP-MCB- 3 nos 2x4+1x2.5 Sq.mm Cu wire(Gloster /KEI/RR Kabel)

Supply of 35/36 watt system wattage 6500 K colour Temperature, cool day light colour, recessed mounted IP 20 LED 2ft X 2ft luminaries having > 3050 lm system output. Luminary shall be made up of CRCA epoxy polyester powder coated housing. Luminaries shall have optical grade High Efficiency Translucent Optical component for very high efficiency with minimum glare.Driver output voltage shall be less than SELV limits for safe DC operation and maintenance. The Driver should be fully designed and manufacture in India. The fittings should be fixed in false ceiling by hanging with chain / spring and fastner and as required for proper fixing with the actual ceiling and complete with all accessories having following Model/Cat No.- Philips RC380B LED42S- 6500 G6 L60W60 PSU OD S1/ Wipro CRCO1ORO3OHP57G3 /As per choice of EIC]

Supply of 15watt round/square shape recessed mounted LED Luminaries with Aluminium diffuser & housing (CCT- 4000 K/6500 K, CRI- ≥ 70%, Minimum Lumen Out of Luminaries ≥ 105 lm/watt) for false ceiling application, complete with all accessories having following Model/Cat No. Model/Cat No.-Philips-SM 251/261 LED 20S 6500 PSU WH / Wipro - LD06 221-XXX-57SMG1/As per choice of EIC]

Supply of 4 Ft. Single LED Fitting with 1 no 20 Watt MAS LED tubelight (CCT- 6500 K, CRI- ≥ 70%, Minimum Lumen Out of Luminaries:- 100 lm/watt) for indoor application,complete with all accessories having following Model / Cat No. [Make- Crompton-IGP161LT8-16 1xT8 & -LGT8-20-865-2 /Philips-TMC 502 1X T-LED 22W & Mas LEDTube18W, 2100lm 865 T8 /Wipro/As per choice of EIC

Supply of 4 Ft. Double LED Fitting & 2 nos 20 Watt MAS LED Tube light (CCT- 6500 K, CRI- ≥ 70%, Minimum Lumen Out of Luminaries:- 100 lm/watt) for indoor application, for indoor application, complete with all accessories having following Model / Cat No. [Make- Crompton-IGP161LT8-16 2xT8 & -LGT8-20-865-2 /Philips- TMC 502 2X T-LED 22W & Mas LEDTube18W, 2100lm 865 T8 /Wipro/As per choice of EIC]

Fixing only recessed mounted LED fitting complete with all accessories on false ceiling by making holes etc. as required For 2ft x 2ft recessed mounted fitting

Fixing only round shape recessed mounted LED fitting complete with all accessories on false ceiling by making holes etc. as required For round shape recessed mounted fitting

Supply & Fixing of 250V. 50 Hz. Metal Body wall bracket fan having 40 cm (400 mm) sweep, Air Displacement In M3/Hour-6030, Speed 1420 rpm non-oscillating type aerody.namically balanced, full metal body & Blade and a Strong base for stability,on wall with all accessories (Make : EPC/ Crompton AC VORTEX I8WM)

Supply & Delivery of Exhaust fans complete with all accessories having the following Model / Cat No. (Make & Model approved by EIC) 9"(230mm) Sweep, Speed- 1370 RPM, [Make- EPC/ Havells/Crompton]

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: For 23 cm (9") Exhaust fan

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For 23 cm (9") Exhaust fan

Supplying & Fixing engage board as per direction of EIC. Note : 1) Suitable quantity of Common / Regular EI materials like wires, Pipes, piano key type & modular type switches, sockets, MCB of different ratings, modular type switch boards etc. should be stored at site by the Agency in advance with his own responsibility to overcome emergency situations. 2) Works through requisition (i.e, Regular work) should be started within 16 hrs & the emergency breakdown works should be started within 4 hrs with requisite manpower after getting the information either from site or from office. Each individual work must be completed with minimum executing time as per site requirement. 3) The Agency must submit the details of communicating person in this regard along with his Mobile number & Email id.

Note:- Rate should be quoted inclusive of all taxes and duties including GST.

BISWAKARMA ELECTRIC WORKS (BID ID -7669877)

M/S R. K. ENTERPRISE (BID ID -7483953)