SITC of HSCF Pumping Machinery at Khijadiya Head Works for Ranuja Section Under WSS-6 General RWSS.

Name of Project :- SITC of HSCF Pumping Machinery at Khijadiya Head Works for Ranuja Section Under WSS-6 General RWSS.

Name Of Work :- Supply, Installation, Testing and Commissioning of HSCF Pump Sets with allied Mechanical and Electrical Equipment and Accessories, etc., complete at Khijadiya

Head Works for Ranuja Section of Khijadiya RWSS under WSS-6 General Water Supply Programme, Ta. Jamnagar, Dist. Jamnagar

Head Works :- Khijadiya Hw to Ranuja ESR Section

Duty Point :- 400 m3/hr (111.11 LPS) X 97 Mtr. Head X 160 KW ( 1 Working +1 Stand By)

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

(A) MECHANICAL EQUIPMENTS SECTION

Dismantalling of existing 90 KW HSCF Pump Set at site with its cable, MS Pipe with Butterfly & DPCV Valve etc. complete as per

1 1 instructions of engineer-in-charge. 2 Job 0.00 9375.00

Supply, installation, testing & commissioning of horizontal split casing centrifugal pump motor set of specified duty

parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage

induction motor (with minimum IE-3 efficiency class), working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated

speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS.

2 2 M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB , Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal 2 Set 1236480.00 25000.00

(Above 30 kW), Base Frame: MS

Capacity:- 400 m3/hr (111.11 LPS) X 97 Mtr. Head X 160 KW

Supply, installation, testing & commissioning of Shaft, Impeller, Shaft Sleeves, Bearing, etc. complete Assembly Suitable for

Wilo make horizontal split casing centrifugal pump motor set(Sr. No. 81252242/120/1), working on three phase AC supply with

50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM etc. as per relevant IS.

M.O.C.: Impeller & Wearing Rings: CF8M, Shaft: SS 410, Shaft Sleeve: SS 410 etc.

Capacity:- 300 m3/hr (83.33 LPS) X 70 Mtr. Head X 90 KW

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of upto 400 mm Dia Suction/Delivery/COMMON

HEADER/By Pass MS Pipings with Flanges, Concentric / Eccentric Nozzles, Reducer / Expanders, Bolts, Nuts,etc. Complete. as per

relevent IS Standard

For New 300 mm Dia Suction, 250 mm Dia Delivery & 350 mm Dia Common Header & for Exsting Pipe 250 mm Dia Suction,

200 mm Dia Delivery

Installation, testing & commissioning of existing 90 KW HSCF Pump Set at site with its cable, etc. complete as per instructions of

5 5 engineer-in-charge. 1 Job 0.00 18750.00

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Installation, testing & commissioning of Departmently Supplied 250 mm Dia Butterfly Valve, DPCV Valve & Expansion Bellow

6 6 at site with its cable, etc. complete as per instructions of engineer-in-charge. 1 Job 0.00 2838.00

Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M) process

connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon Tube, SS 316 Movement material,

Aluminium dial with black graduation on white background, Micro Zero adjustable pointer, neoprene gasket, Blow out disc, shatter proof

glass, SS tag plate etc as per IS

(a) 150 mm Dial Size- 0 to 21 Kg/cm2

Providing & Laying Reinforced Cement Concrete in Thrust Block/Piping/Valves Supports etc. with Tar steel, Black Trap Kapchi as

Coarse Aggreate for Raft,Grillage Footing with Necessary Centering Form work, Consolidating as per Directive in 1:2:4 Ratio comp. as Cu.

per site requriement. Mtr.

Total of Section-(A) Rs.

(B) POWER DISTRIBUTION SECTION

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip /

round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in

9 9 existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part- 90 Mtr. 1354.00 40.00

1) & IEC:60502 (Part-1) of following sizes: 1 X 3.5 X 300 Sq.mm. - from LVDB to MCC Panels to Motor & From Transformer to LVDB

Supply, installation, testing & commissioning of 415 V Fully automatic Microprocessor based soft starter with built in bypass

arrangement for pump control application as per general specification as under: Control Method -Torque Control, Input voltage- 415 V,

3 Phase, Input frequency - 50/ 60 Hz (± 5%), Confirmative to standard - IEC 61947-4-2UL, CSA, CE, Motor protection - inbuilt Thermal

10 10.1 Protection, Starter protection - SC UV, Phase unbalance, Phase failure, EMC Std- IEC 61000-4-2 Level-3 & IEC 61000-4-3-Level-3, 1 No. 121859.00 4772.00

Built in communication as per RS

- For 160 KW Pump Set

Microprocessor Based LV Soft Starter:

Casting of transformer plinth / foundation including oil soak pit (where required) in situ reinforced cement concrete in M 20 using

granite, quartzite trap metal of size 6 mm to 20 mm for RCC work including providing of 53 grade cement & Fe 415 grade TMT bars,

11 11 scaffolding, centering, form work, curing etc. complete. 1 Job 0.00 35000.00

RCC plinth / foundation for transformer of capacity 400 KVA (Plinth Dimensions(L x W x H)-1500x1500x 1500)

Installation, testing & commissioning of existing 400 KVA 11/3.3 kV Voltage Ratio Transformer at site etc. complete as per

12 12 instructions of engineer-in-charge. 1 Job 0.00 36750.00

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supplying & erecting funnel type earthing having earth plate of following size burred in specifically prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt with alternate layers of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for

watering & bricks masonry block, C.I. Cover complete as per para 7.3 of IS 3043 with necessary length of double Galvanised Iron /

13 13 copper earth wire No 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to the 2 Job 7119.00 678.00

nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS (As per drawing) with following

specification with 60 x 60x 0.315 cms. Copper earth Plate (For Transformer Neutral)

Providing and erecting required size Aluminium strip for earthing of H.T. , OCB / ACB / Transformer, LT panel board, Motors etc.

14 14 using copper clamp. 50 Kg 206.00 17.00

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using

15 15 copper clamp. 50 Kg 753.00 34.00

Supply, laying, testing & commissioning 11 / 11 kV (UE) grade, XLPE insulated, stranded Aluminium conductor, galvanised steel

flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps /

16 16 in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS: 7098 50 Mtr. 1738.00 64.00

(Part-2) & IEC: 60502(Part-2), of following sizes:

3 Core 150 sq mm (For GEB to VCB Panel to Transformer)

Providing & fitting heat shrink cable termination / jointing kits for 11 kV (UE) / 11 kV (E) grade XLPE insulated cable including

necessary earth connectivity connection, material & consummables making the termination/ joint complete ensuring the joint resistance

17 17.1 is within the permissble limit as per IS, of following types & sizes: 2 No. 7289.00 636.00

Indoor Terminations Kit suitable for 3C x 150 sq mm HT Cable

Outdoor Terminations Kit suitable for 3C x 150 sq mm HT Cable

Total of Section-(B) Rs.

Total of Section ( A+B ) Rs.