REPAIRS TO FLOORING CEILING ROOFING AND OTHER ALLIED WORKS AT CENTRAL AMMUNITY BUILDINGS GE OFFICE AGE OFFICE AND BSO OFFICE AREA UNDER GE DEHU ROAD

Amount

Dismantling floor, hearth or wall tiling marble etc including cement mortar bedding,and not backing including removing serviceable tiles to stores and rubbish off the premises complete all as specified & directed.

M&L for joint free non-skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18sqm, of approved colour in floors, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour. over 15mm thick screed bed in CM (1:6) for floor complete all as specified & directed.

M & L Glazed ceramic coloured tiles 300 mm x 450 mm x 6 to 7 mm thick,as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4) complete all as specified & directed.

M & L Glazed ceramic coloured tiles 300 mm x200 mm x 6 to 7 mm thick,as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4) complete all as specified & directed.

M&L for vitrified coloured tiles 10mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete all as specified & directed.

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified.

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified.

Demolition of cement concrete in ground floor & paving n.exc 15 cm thick etc.,complete all as specified.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 using (20 mm graded stone aggregate) as in floor,finished rough to receive tiles etc,complete all as specified.

M&L for 50 mm thick PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection, finished concrete surfaces even and smooth without using extra cement complete all as specified & directed.

Material and labour 75 mm thick plain cement concrete 1:4:8 type C-2 using 40 mm graded stone aggregate as in the sub base of floor complete all as specified.

Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc,complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified & directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:4, complete all as specified

M & L for Preparation of new previously plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete all as specified & directed.

M&L for prepartion of newly plastered surface of wall applying two coats of weatherproof paint on external surfaces including a coat of alkali resistant priming paint complete all as specified.

Dismantling timber scantling 40 sq.cm and over in section, in any position complete all as specified & directed.

Taking down Chowkat/frame n.exc 1.5 sq.m including removing to store,complete all as specified.

Taking down Chowkat/frame exc 1.5 sq.m & n.exc 4 sq.m including removing to store,complete all as specified.

Taking down Shutters of any description exc 1 Sqm and n exc 2 sq. m each and removing to store,complete all as specified.

Taking down Shutters of any description exc 2 sq. m each and removing to store ,complete all as specified.

S&F plain solid straight chowkat and frames wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joint in 2ND class hard wood,complete all as specified.

S&F Glazed and skeleton shutter 35 mm thick 1st class soft wood, divided into square, with plain chamfered or round mitred and rebated sash bar, any numbers prepared to receive glass, gauge etc edges of framing plain or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chowkat ,complete all as specified.

S & F 30 mm thick 1st class class hard wood glazed and skelton shutter for window, ventilator, etc. open rebated and prepared to receive glass gauze etc (without shas bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Pt I Section 8, clause 8.2 (b),complete all as specified.

S&F plain framed paneled shutter 32 mm thick with locking rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneered on both face. The size of rail and style as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated 2nd class hard wood,complete all as specified.

S & F Butt hinges 100 mm size medium weight cold rolled mild steel and fixed, complete all as specified.

S & F Butt hinges 75 mm size medium weight cold rolled mild steel and fixed, complete all as specified.

S & F Extruded Aluminium alloy handles, fabricated type, anodised 150 mm size, complete all as specified.

S & F Extruded Aluminium alloy handles, fabricated type, anodised 125 mm size, complete all as specified.

S & F 200 mm mild steel tower bolt, ISI marks, stone enameled black with bright bolt and fixed, complete all as specified.

S & F 125 mm mild steel tower bolt, ISI marks, stone enameled black with bright bolt and fixed, complete all as specified

S & F 250 mm aluminum anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed

S & F in repairs 15 mm bib taps fancy type long shank cast copper alloy chromium plated with crutch with butter fly handle, screwed for iron pipe or brass ferrule, complete all as specified

S & F in repairs 15 mm dia angle valves cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed, complete all as specified.

Supply and fixing in repairs Viteous China squatting pan, Orrissa, pattern, size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe complete all as specified and directed by Engineer-in -Charge.

Supply and fixing in repair for vitreous china european dual type one piece type water closet with flushing cistern of size 780x375x700 mm star white over and including fittings such as s' trap distance pieces 100 mm long etc comple make : Hindware cat part No 92071 or equivalent all as specified and approved Accepting officer.

S&Fixed in repairs vitreous china urinal half stall type white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing only flushing cistern with brackets including waste pipe etc Make:-Hindware,Cera,Parryware complete all as specified & directed.

Supply & fixed in repair Chromium plated corner glass shelf with bracket and 6.3 mm sheet glass including circular cutting, grinding polishing & rounding edges of glass etc. complete all as specified & directed.

S & F in repairs 10 litres cap PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified.

S & F in repairsVitreous China wash basin white with pedastal flat back size 580x450 mm including brackets, complete all as specified.

S & F in repairs 15 mm pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screed down high pressure, with or without lettered 'Hot; or 'cold' with long screwed shanks and fly nut, screwed for iron pipe and fixed, complete all as specified & directed.

Supply & fixed in repair Towel Rail 600 mm long of CP brass fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) complete.

Supply and fixed PVC connection 15 mm dia and 45 cm long with 2 Nos brass nuts, fixed in repairs complete.

Supply & fixed in repair rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) of 500 litres capacity, ISI marked, double layered, marked embosed, hoisted and fixed in position including connecting up pipes complete.

Supply & fixed in repair rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) of 1000 litres capacity, ISI marked, double layered, marked embosed, hoisted and fixed in position including connecting up pipes complete.

M&L for 15 mm ball valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or ferrule and fixed, complete all as specified.

Supply and fixed Grating round 100 mm size with waste hole of stainless steel fixed in repairs complete

Supply and fixed Brass chromium plated shower rose 65 to 90 mm size extension piece with swivel joints, fixed in repairs complete.

Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

S&F 15mm bore Galvanised mild Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

Fixing only 15mm bore Steel water tubing with provn of all new fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. NOTE: Old serviceable steel tubing retrieved from taking down shall be used.

S&F in repairs glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed.

S&F of sheet glass 3 mm thick ordinary glass with oil putty in square n.exc 0.5 sq.m in each pane complete all as specified & directed.

S&F Stainless steel wire in repair cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified & directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern in roof covering complete all as specified & directed.

Dismanteling MS works of any desc. not otherwise provided for complete all as specified.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

All as per item No. 59 above but fix in valley gutter / ridge,plain/corrugated.

Dismantling timber in fillets,rafters,purlins etc. under 40 sqcm in section unframed work complete all as specified & directed.

S&F Rolled Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) complete all as specified & directed.

S&F Roof truss framed trussed etc incl distance piece , cleats with necessery welding works etc Fe 410-W ( gde E-250)Quality A complete all as specified & directed.

M &L for MS work as Hand rails, half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk forbalusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; in wind tie or any other work incl cutting, drilling holes etc complete all as specified & directed.

M&L for MS Plates (plain or chequrred) channels,square cut, notched chamfer or square cut or notched (ordinary and counter sunk) forming holes without any attachment with MS Gde Fe 410-0 complete all as specified & directed.

M&L for mild steel screw bolts (machine made) with hexogonal or square heads at one end & screwed the other or screwed both ends each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt n.exc 5 cm long, diameter of neck 11 mm to 15mm complete all as specified & directed.

M & L for mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exceeding 30cm long of dia of neck in mm exc 12 and not exc 20mm complete all as specified & directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified & directed.

Material and labour for 20 mm thick granite stone machine cut (table rubbed and polished) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing, complete all as specified.

Labour only for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed.

Supply & fixed in repair Wall mixer with telephonic type chromium plated, fancy type, 15 mm bore fixed in repairs complete. MAKE : MARC Cat No. MES-1140 or equivalent all as specified and approved by Accepting Officer.

Supply & fixed in repair Center hole basin mixer 15 mm dia chromium plated brass with costed swinging spout including plugging and securing to walls, fixed in repairs complete. Make : L&K Cat No. 0427 or equivalent in specified makes as approved.

S&F steel windows with side hung shutters including box type hinges or factory made butt hinges with steel handle and steel peg stays etc complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges or factory made butt hinges with steel handle and steel peg stays etc complete without glazing bars dovetailed or welded complete all as specified and directed.

Supply and fixing aluminum anodized frame for doors, windows, ventilators, powder coated (minimum thickness of powder coating 50 micron) with one or more rebates including PVC protector sheeting and jointing cleat for fixing etc. complete all as specified.

S&F aluminum powder coated window and ventelator shutter sliding type two way with or without sash bars of aluminum section weighing 0.55 Kg per Sqm including necessary joining clits , glazing clips, rubber packing, alu. Snap beading , screws, aluminum fittings, suitable handles complete all as specified & directed.

Taking down existing steel rolling shutter complete incl repair /replacement of ball bearing repair to top cover , ancohoring rod hasp and stepple incl repair to gear box and provision of gear box crank handle completely making the shutter operational by greasing all as directed by Engr in charge( incl provision of one coat of synthetic enamal paint in rolling shutter ) size of shutter n exc 10 Sqm complete all as specified & directed.

M&L in repair Steel rolling shutters, with or without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete push pull or manual type thickness of lath 1.00 mm complete all as specified and as directed.

M&L, applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces of any description over 10cm width or girth not otherwise described complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed.

M&L for preparation old wooden surface and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation steel surface and aplying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for Preparing new surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with one coats of creosote oil complete all as specified.

S&F for pressed steel frames size 105mm x 60mm for doors with double rebates incl necessary fixing lugs hinges lock strike plates etc complete as specified.

S&F for pressed steel frames size 125mm x 60mm for doors with double rebates incl necessary fixing lugs hinges lock strike plates etc complete as specified.

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid complete all as specified & directed.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling complete all as specified & directed.

M&L 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid complete all as specified & directed.

S & F hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long complete all as specied and as directed.

DR J S CHADHA AND SONS

H S TAKHI