Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.7 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹37.3 L+₹6.3 L (20.3%)Rejected-Finance | L2 | Rejected-Finance BEING OTHER THAN LOWEST BIDDER | |
| 3 | L3₹41.1 L+₹10.1 L (32.6%)Rejected-Finance | L3 | Rejected-Finance BEING OTHER THAN LOWEST BIDDER |
| Sl No | Description | Qty | Unit | Surendra Singh L1 | M/S Dharam Chand Lal Chand Jain L3 | KALWA TRANSPORTER AND SUPPLIERS L2 |
|---|---|---|---|---|---|---|
| 1.00 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for (such as copings, bands of any type, roof padding, kerbs, sunken etc; overall thickness and removing the dust debris etc to a distance not exc 250 meter from site and disposing the same complete all as specified and as directed by Engineer in charge. | 18 | Cum | 90 ₹1,620 Lowest | 450 ₹8,100 | 300 ₹5,400 |
| 2.00 | M&L for plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregates as over roof for making good depression/ undulation to make the existing roof surfaces as filling in depression of roof slab/ floor padding/ roof kerbs rounded or chamfered on edges etc complete all as specified and as directed. | 8.5 | Cum | 1,900 ₹16,150 Lowest | 4,200 ₹35,700 | 3,900 ₹33,150 |
| 3.00 | M&L providing and applying roof treatment as following stage:-
(i) Apply 1st coat of PU coating ( Shaliurethane LHM @ 650gm/Sqm or equivalent by brush/roller/spray. Spread non-woven geo-textile or glass fiber tissue of 45 GDM with overlaps of 50 mm in both directions when the surface is still tacky, this is optional,to be assessed as per site requirements to achieve higher mechanical properties.
(ii) Allow 1st coat to dry for 10-12 Hrs.
(iii) (Apply 2nd coat of PU membrane (ShaliUrethane LHM @ 650gm/sqm or equivalent)as per manufacturs instructions. Extend waterproofing treatment up to 200 mm and terminate into groov on the parapet wall.
(iv) Protect the applied liquid membrane by sprinkling sand @ 200gm/Sqm over the final coating when the surface is still tacky to facilitate plastering, and including 25 mm thick plastering in CM 1:3 with admixture and WPC.
Note No-1:- treatment shall be done though authorised representative of manufacture's instructions. | 190 | Sqm | 490 ₹93,100 Lowest | 675 ₹1,28,250 | 790 ₹1,50,100 |
| 4.00 | M&L for plain cement concrete 1:3:6 type C-1,using 20mm graded stone aggregates as in coping to parapet walls including necessary formwork complete all as specified and as directed. | 1 | Cum | 3,500 ₹3,500 | 4,000 ₹4,000 | 2,600 ₹2,600 Lowest |
| 5.00 | Supply only integral water proofing liquid ISI marked Make: Pidiproof LW | 15 | Litre | 50 ₹750 Lowest | 125 ₹1,875 | 70 ₹1,050 |
| 6.00 | Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed. | 37.28 | Cum | 110 ₹4,100.8 Lowest | 400 ₹14,912 | 270 ₹10,065.6 |
| 7.00 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.; laid bedded and pointed in any mortar including cement mortar bedding (but not backing) complete all as specifide. | 12.2 | 10 Sqm | 50 ₹610 | 250 ₹3,050 | 30 ₹366 Lowest |
| 8.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. | 372.5 | Sqm | 25 ₹9,312.5 Lowest | 45 ₹16,762.5 | 50 ₹18,625 |
| 9.00 | M&L for non skid ceramic tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed. | 285 | Sqm | 798 ₹2,27,430 Lowest | 1,100 ₹3,13,500 | 900 ₹2,56,500 |
| 10.00 | M&L for non skid ceramic tiles 10mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size exceeding 0.11 sqm but not exceeding 0.38 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed. | 27.5 | Sqm | 850 ₹23,375 Lowest | 1,200 ₹33,000 | 900 ₹24,750 |
Tender Value
₹35.3 L
EMD Value
₹70,600
Closing Date
28 Mar 2026, 6:00 pmClosed
GE (ARMY) NO 2 JODHPUR
Military Engineer Services, Garrison Engineer (Army) No 2 Jodhpur, Multan Lines, Army Area Jodhpur -342010
SPL REPAIR IN GOVT MD ACCN BLDG NO P-709/01 TO 06 OF VARIOUS UNIT IN BSE LINE OF ARMY AREA UNDER GE (ARMY) NO 2 JODHPUR
2026_MES_755412_1
8800/25-26/81/E8
Open Tender
Civil Works
Item Rate
180 days
GE (ARMY) NO 2 JODHPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (ARMY) NO 2 JODHPUR
₹70,600
Yes
19 May 2026
6 Mar 2026
30 Mar 2026
6 Mar 2026
28 Mar 2026
21 Mar 2026
6 Mar 2026 - 14 Mar 2026
Demolition of cement concrete of any description and in any position not otherwise specifically provided for (such as copings, bands of any type, roof padding, kerbs, sunken etc; overall thickness and removing the dust debris etc to a distance not exc 250 meter from site and disposing the same complete all as specified and as directed by Engineer in charge.
M&L for plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregates as over roof for making good depression/ undulation to make the existing roof surfaces as filling in depression of roof slab/ floor padding/ roof kerbs rounded or chamfered on edges etc complete all as specified and as directed.
M&L providing and applying roof treatment as following stage:- (i) Apply 1st coat of PU coating ( Shaliurethane LHM @ 650gm/Sqm or equivalent by brush/roller/spray. Spread non-woven geo-textile or glass fiber tissue of 45 GDM with overlaps of 50 mm in both directions when the surface is still tacky, this is optional,to be assessed as per site requirements to achieve higher mechanical properties. (ii) Allow 1st coat to dry for 10-12 Hrs. (iii) (Apply 2nd coat of PU membrane (ShaliUrethane LHM @ 650gm/sqm or equivalent)as per manufacturs instructions. Extend waterproofing treatment up to 200 mm and terminate into groov on the parapet wall. (iv) Protect the applied liquid membrane by sprinkling sand @ 200gm/Sqm over the final coating when the surface is still tacky to facilitate plastering, and including 25 mm thick plastering in CM 1:3 with admixture and WPC. Note No-1:- treatment shall be done though authorised representative of manufacture's instructions.
M&L for plain cement concrete 1:3:6 type C-1,using 20mm graded stone aggregates as in coping to parapet walls including necessary formwork complete all as specified and as directed.
Supply only integral water proofing liquid ISI marked Make: Pidiproof LW
Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.; laid bedded and pointed in any mortar including cement mortar bedding (but not backing) complete all as specifide.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L for non skid ceramic tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
M&L for non skid ceramic tiles 10mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size exceeding 0.11 sqm but not exceeding 0.38 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.
M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
M&L for glazed ceramic colored tiles of suitable color and design that are 350 x 250 x 7 mm, 450 x 350 x 7 mm, 300 x 450 x 7 mm, or any other size that is closer to that as authorized by the engineer in charge. The tiles must be set vertically, joined in a clean cement slurry, pointed in a matching color, and have a 10 mm thick rendering in CM 1:4 as the backing coat complete all as specified and as directed by Engineer-in-charge.
M&L for 16 -18mm thick granite (black colour) work (table rubbed and polished) in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and mouling including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 18-20 mm (+ 2mm) thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
M&L for mirror polished machine cut Kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed complete all as specified and as directed.
M&L for 75mm thick PCC 1:4:8 type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc; complete all as specified.
Providing and laying 60mm thick factory made table vibratory, PU mould, chamfered edge cement concrete coloured paver block of M-25 grade with approved design & pattern as in footpath, drive ways or parking etc; over and including 50mm thick compacted bed of fine sand and proper embedding/ laying of inter locking paver blocks into the sand bedding layer, filling the joints with sand and cutting of paver blocks as required, complete all as specified and as directed.
M&L for factory made precast cement concrete solid blocks M-30 Grade, using 20 mm graded crushed stone aggregate as in kerb stones of any size (with plain or interlocking joints as directed) set in cement mortar 1:4 for path edgings etc; embedded in position including all necessary excavation, tamping ground arround blocks and removal of rubbish/ surplus soil etc., complete all as specified and directed by Engineer-in-Charge.
M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc including necessary form work complete all as specified.
Demolition of stone/brick masonry, comprising all quions, arches, pillars, and other structures made in cement mortar, but without ashlar facings, dressed stone work, or suitable stone set away for future use, as well as the removal of unusable material from low-lying areas complete all as specified and as directed by Engineer-in-charge.
M&L for brick work with fly ash bricks (old size bricks), straight or curved on plan exc 6mtr mean radius, built in cement mortar (1:6) complete all as specified and as directed.
Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed
M&L for rendering 15 mm thick in CM 1:6 over stone masonary, concrete surfaces, finished even and smooth (without using extra cement), all as specified and as directed.
M&L for 15 mm thick rendering on stone masonary wall surfaces in CM 1:4 finished fair and even all as specified and as directed.
M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed.
M&L for carrying out water proofing treatment for sunken portion in the following stages - (i) Taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and rubbish of the pemises , cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00kg/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (ii) M&L for two coat of acrylic cementitious water proofing coating (Dr FIXITpidifin 2k manufactured by M/s Pidilite Industries Ltd or equivalent) and followed by a overlay protective screed (10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer's instructions) on top surfaces of sunken slab after preprations as mentioned above. Method of application for acrylic cementitious water proofing coating achieved as per manufacturers instruction complete all as specified and directed.
Dismantling cast iron work of any description and in any position complete all as specified.
S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.
稀ࠀ牐灥牡瑡潩景漠摬搠捥牯瑡摥瀠慬瑳牥摥猠牵慦散景眠污獬攠捴…灡汰楹杮漠敮挠慯⁴景眠楨整眠獡潣灭敬整愠汬愠灳捥晩敩I`Ј倀敲慰慲楴湯漠汯敤潣慲整汰獡整敲畳晲捡獥漠散汩湩攠捴…灡汰楹杮漠敮挠慯⁴景眠楨整眠獡湯挠楥楬杮†潣灭敬整愠汬愠灳捥晩敩3;Lo䴀䰦映牯挠牡祲湩畯⁴敲慰物搠浡慭敧删䍃瀠潲敪瑣潩獮挬慨橪慦楣ⱡ爠潯牰橯捥楴湯映捡慩瑥湩琠敨映汯潬楷杮猠慴敧ਭ椨 敄潭楬楴湯漠硥獩楴杮慤浭条摥删䍃瀠潲敪瑣潩Ɱ档橡慪映捡慩潲景瀠潲敪瑣潩慦楣ⱡ匠慴物慣敳愠摮猠浩汩牡猠獵数摮摥眠牯湡爨楥普牯散敭瑮挠瑵愠敲畱物摥琠慦楣楬慴整搠浥汯瑩潩⥮ਮ椨⥩倠敲慰慲楴湯漠硥獩楴杮搠浥汯獩摥瀠牯楴湯戠⁹捳慲灰湩Ⱨ挠瑵楴杮档獩汥湩Ⱨ搠牥獵楴杮愠摮挠敬湡湩硥潰敳敲湩潦捲浥湥ⱴ猠牵慦散景搠浡条摥潬獯䍒⁃湡牰癯摩湩散敭瑮挠湯牣瑥ㄨㄺ㔮㌺ 獵湩㈱㔮洠牧摡摥挠畲桳摥猠潴敮愠杧敲慧整椠据畬楤杮渠捥獥慳祲映牯潷歲愠摮爠楥普牯散楷桴氠睯挠牡潢湡敮污摥眠物湩栠硥条湯污猠慨数ㄠ〮浭搠慩敭牴档捩敫楷敲洠獥景猠穩㔲浭挠浯汰瑥⠊楩⥩䄠灰祬湩猱⁴挠慯⁴敲摮牥湩景ㄠ洰桴捩椠䵃⠠㨱⤳†癯牥搠浥汯獩敨潣据敲整映捡慩瀯潲敪瑣潩畳晲捡獥愠摮愠汬睯琠牤⁹ⴶ‸版湡畣敲楷桴朠湵祮樠瑵慢ਠ椨⥶†灁汰楹杮映湩獩敨潣瑡漠〱浭琠楨正爠湥敤楲杮椠䵃ㄠ㐺甠楳杮ㄠ〰‥潣牡敳猠湡癯牥ㄠ瑳挠慯⁴敲摮牥摥猠牵慦散湡楦楮桳摥猠牵慦散攠敶湡浳潯桴眠瑩獵湩硥牴散敭瑮愠摮洠硩摥眠瑩┳椠瑮来慲慷整牰潯楦杮挠浯潰湵湡慭楫杮搠楲⁰潭汵楤杮獡爠煥畩敲湡畣敲楷桴樠瑵畧湮⁹慢潦‷慤獹挬浯汰瑥污獡†楤敲瑣摥戠⁹湅牧椭桃牡敧⸮ਠ瘨 牐灥牡瑡潩景猠牵慦散愠摮愠灰祬湩睴潣瑡景眠慥桴牥挠慯⁴慰湩⁴癯牥愠挠慯⁴景攠瑸牥潩慷汬挠牡異瑴⁹琠慭捴硥獩楴杮猠牵慦散潣灭敬整愠汬愠灳捥晩敩湡獡搠物捥整吊敨爠瑡獥焠潵整祢琠敨戠摩敤獲䌯湯牴捡潴桳污湩汣摵桴映汯潬楷杮ⴺ⠊⥡圠牯慣牲敩畯⁴灵琠㈱䴠牴椠敨杩瑨ਮ戨 獕景匠慣晦汯楤杮牴獥汴獥慬摤牥ⱳ挠慲汤獥攠捴渠捥獥慳祲映牯攠數畣楴湯漠潷歲愠摮†污牰瑯捥楴敶洠慥畳敲敲灳湯楳楢瑬⠊⥣删浥癯污漠硥慣慶整慭整楲污渠攠捸〵湡敤潰楳楴杮眠敨敲搠物捥整祢䔠杮湩䌠慨杲ਠ˴䴀瑡牥慩湡慬潢牵映牯瀠楯瑮眠物湩潣灭敬整眠瑩⸱‵煳洠楳杮敬挠牯畭瑬瑳慲摮摥挠灯数潣摮捵潴噐⁃剆卌⁈湩畳慬整湵桳慥桴摥ㄠ〱‰潖瑬朠慲敤挠扡敬椠湡湩汣倠䍖䘠䱒䡓䌠乏䕃䱁䑅䌠乏啄呉倠偉⁅䤨䥓䴠牡敫⥤眠瑩污捡散獳牯敩湩汣摵湩敮⁷牰獥敳瑳敥整浲湩污戠硯獥⠠畳歮椠慷汬⤠眠瑩⸳〰洠桴捩汰獡楴慬業慮整桳敥⁴潴⁰潣敶牯倠䍖䘠䱒䡓戠慯摲椠据畬楤杮倠䍖䘠䱒䡓琠灯挠癯牥眠瑩⸱〵猠ⁱ浭椠獮汵瑡摥甠獮敨瑡敨噐⁃剆卌⁈畭瑬獩牴湡敤潣敶敲潣灰牥挠湯畤瑣牯映牯挠浯潭慥瑲湡潣湮捥楴杮琠慥瑲潤汬⁹湡慭楫杮朠潯楤瑳牵敢畳晲捡景眠污湩汣洠瑡档湩桴潣潬牵漠慷汬振楥楬杮眠瑩硥楴瑳湩慷汬振楥楬杮挠汯畯污獡猠数楣楦摥愠摮搠物捥整潦潦传敮氠杩瑨支桸畡瑳振楥楬杮映湡瀠楯瑮挠湯牴汯敬祢漠敮猠楷捴湯慷㕹慍整楲污愠摮氠扡畯潦敢汬瀠獵汦獵祴数㔠䄠灭畓灰祬愠摮映硩湩椠敲汰捡浥湥⁴䕌⁄楬桧獴映瑩楴杮ㄠ⁸〲ⱗ㈠〲ⱖ䍁搠捥牯瑡癩潢⁸祴数眠瑩牤癩牥潨摬牥椠据畬楤杮䰠䑅琠扵楬桧⁴潣湮捥楴杮甠⁰楷桴琠牨敥挠牯汦硥扩敬挠灯数潣摮捵潴慣汢景猠極慴汢楳敺映潲散汩湩潲敳挠浯汰瑥䅥畓灰祬愠摮映硩湩椠敲汰捡浥湥⁴䕌⁄敓畣楲祴氠杩瑨映瑩楴杮㌠‵慗瑴㈠〳嘠䄠⁃畯摴潯祴数䤠⁐㔶㘯‶楷桴栠杩牰獥畳敲搠敩挠獡⁴污浵湩浵栠獯湩湡敨瑡爠獥獩慴瑮挠浯汰瑥楷桴搠楲敶Ⱳ氠浡⁰牢捡敫⁴楷桴椠灭捡⁴湡潣牲獯潩敲楳瑳湡⁴湩汣摵湩桴牥慭慭慮敧敭瑮椠畭瑬灩敬漠瑰捩潣灭敬整眠瑩偉㘠‷牰瑯捥楴湯挠浯汰瑥ⱥ♍⁌潦楄捳湯敮瑣湩污慷整⽲汥捥牴捩挠湯敮瑣潩愠摮琠歡湩潤湷眠瑡牥栠慥整敧獹牥†牦浯攠楸瑳湩潰楳楴湯愠摮欠敥⁰湩猠晡畣瑳摯⁹潦敲楦⁸瑡琠敨猠浡潬慣楴湯愠摮挠牡楲摥漠瑵渠捥獥慳祲爠灥楡潦湵癳椠整椠据畬楤杮瀠楡瑮湩景朠祥敳噐⁃潃湮捥楴湯瀠灩〨′潎⥳挠浯汰瑥污獡搠物捥整Ø吀歡湩潤湷愠摮爠晥硩湩桴攠楸瑳湩汥捥牴捩洠瑥牥猠湩汧⽥桴敲桰獡景愠祮挠灡捡瑩⁹牯洠歡ⱥ猠捥牵…慭敫渠睥愠汬攠敬瑣楲慣潣湮捥楴湯挠浯汰瑥污獡搠物捥整祢攠杮湩敥湩挭慨杲牯愠数楳整爠煥極敲敭瑮혮硅慣慶楴湯椠牴湥档獥渠瑯攠捸ㄠ㔮洠牴眠摩湡潮⁴硥⸱‵瑭敤灥椠潳瑦⼠潬獯潳汩朠瑥楴杮漠瑵愠摮氠癥汥湩漠潢瑴浯猠牵慦散琠敲畱物摥氠癥汥挠浯汰瑥污獡猠数楣楦摥愠摮愠楤敲瑣摥戠⁹桴湅牧椭档牡敧ª刀瑥牵楮杮楦汬湩湩湩汣摵湩灳敲摡湩Ⱨ氠癥汥楬杮慷整楲杮愠摮眠汥慲浭湩湩氠祡牥潮⁴硥㔲挠†潣灭敬整愠汬愠灳捥晩敩湡獡搠物捥整祢琠敨䔠杮湩挭慨杲뙥敒潭楶杮猠牵汰獵†硥慣慶整潲正琠楤瑳湡散†潮⁴硥〵洠†湡搠灥獯瑩湩桷牥楤敲瑣摥†瑡愠氠癥汥渠攮捸⸱‵扡癯桴瑳牡楴杮瀠楯瑮挠浯汰瑥污獡猠数楣楦摥愠摮搠物捥整ąȈ ⁍…⁌潦楦敮搠祲爠癩牥猠湡畣桳潩楮杮戠⁹慬楹杮㠠浣琠楨正氠祡牥戠汥睯琠敨挠扡敬映牯洠歡湩潳瑦戠摥愠摮ㄠ‵浣愠潢敶琠敨挠扡敬愠摮琠敨異湮湩潤湷琠瑩潣獮汯摩瑡摥琠楨正敮獳漠㠱浣愠瑦牥琠敨挠扡敬椠慬摩愠汬愠灳捥晩敩湩匠剓倠牡⁴⁉湡獡搠物捥整 一浡景圠牯㩫匠䱐删偅䥁⁒义䜠噏⁔䑍䄠䍃⁎䱂䝄丠⁏ⵐ〷⼹吠⁏㘰传⁆䅖䥒問⁓乕呉䤠⁎卂⁅䥌䕎传⁆剁奍䄠䕒⁁唠䑎剅䜠⁅䄨䵒⥙丠⁏′佊䡄啐⁒‰煓♍⁌潦敃敭瑮挠湯牣瑥ㄨ㈺㐺 祴数䈠ㄭ甠楳杮㈠‰浭朠慲敤瑳湯条牧来瑡獡椠汰湩桴瀠潲整瑣潩Ɱ㔠‰浭琠楨正畳晲捡獥映湩獩敨癥湥愠摮映楡楷桴畯⁴獵湩硥牴散敭瑮椠据畬楤杮瀠潲楶楳湯漠潣獮牴捵楴湯樠楯瑮潣灭敬整愠汬愠灳捥晩敩É䴀䰦ㄠ〰浭戠牯慣瑳椠潲楰数湡楦瑴湩獧樠楯瑮牯挠湯敮瑣潩獮愠敲映汩敬⽤猠慥敬牰灯牥祬戠⁹灥硯⁹敳污湡⁴景䤠䥓洠牡牯䴠匭慥灡汰⁹獡瀠牥洠湡晵捡畴楲杮椠獮牴捵楴湯ⱳ挠浯汰瑥污獡猠数楣楦摥È䴀䰦㜠洵潢敲挠獡⁴物湯瀠灩獥愠摮映瑩楴杮潪湩獴漠潣湮捥楴湯牡楦汬摥 敳污摥瀠潲数汲⁹祢攠潰祸猠慥慬瑮漠卉⁉慭歲漠ⵍ敓污愠灰祬愠数慭畮慦瑣牵湩湩瑳畲瑣潩獮潣灭敬整愠汬愠灳捥晩敩倠汁獡椠整潎㌠‸畢⁴㜠‵浭搠楡⠠∳ 潤湷琠歡楰数挠浯汰瑥污獡猠数楣楦摥⸮~䴀䰦映牯挠浥湥⁴潣据敲整琠灹ⵅⰲㄠ㔺ㄺ‰㐨洰牧摡摥挠畲桳摥猠潴敮愠杧敲慧整 獡椠畳歮湥瀠牯楴湯挠浯汰瑥污獡猠数楣楦摥䨮♍⁌潦敲湩映牯散散敭瑮挠湯牣瑥㨱㨲‴祴数䈠‱獵湩〲洠牧摡摥猠潴敮愠杧愠椠潣楰杮ⱳ欠敮汥牥ⱳ愠数⁸瑳湯獥敢汰瑡獥敫扲楬瑮汥灵潴ㄠ㔮汣慥灳湡楣汬ⱳ猠整獰※敳獩業湡瑯敨楳業慬慢摮湩汣摵湩敮散獳牡⁹潦浲潷歲渠瑯瀠潲楶敤湩汣摵湩敷瑡敨楲杮汳杩瑨祬爠畯摮摥漠档浡敦敲湡汧獥愠摮琠牨慯楴杮倀牥氠慥ꑦ♍⁌潦〴浭琠楨正映畬桳猠畨瑴牥潳楬潣敲挠湯瑳畲瑣潩Ɱ眠瑩慰瑲捩敬戠慯摲挠牯湡汰睹潯慦散瀠湡汥ⱳ挠浯敭捲慩祴数漠潢桴猠摩潣灭敬整愠汬愠灳捥晩敩È匀䘦漠桳敥⁴汧獡牯楤慮祲焠慵楬祴漠‴浭琠楨正愠摮朠慬楺杮眠瑩楯異瑴⁹牯映硩摥眠瑩潷摯湥戠慥獤漠楦數楷桴爠扵敢慧歳瑥椠煳慵敲湡⁹楳敺漠慰敮挠浯汰瑥污獡猠数楣楦摥☠愠楤敲瑣摥昮♓⁆景猠敨瑥朠慬獳漠摲湩牡⁹畱污瑩⁹景㐠浭琠楨正映潲瑳摥朠慬獳挠浯汰瑥污獡猠数楣楦摥愠摮搠物捥整ʓ匁☀䘀 漀昀 昀愀挀琀漀爀礀 洀愀搀攀 猀漀氀椀搀 瀀愀渀攀氀 倀嘀䌀 搀漀漀爀 猀栀甀琀琀攀爀猀 ㌀ 洀洀 琀栀椀挀欀 ⠀猀琀礀氀攀⤀ 挀漀渀猀椀猀琀椀渀最 漀昀 昀爀愀洀攀 洀愀搀攀 漀甀琀 漀昀 䴀⸀匀⸀ 琀甀戀攀猀 昀漀爀 琀漀瀀 ☀ 戀漀琀琀漀洀 爀愀椀氀猀⸀ 䴀⸀匀⸀ 昀爀愀洀攀 猀栀愀氀氀 戀攀 挀漀瘀攀爀攀搀 眀椀琀栀 栀攀愀琀 洀漀甀氀搀攀搀 瀀氀愀椀渀 挀漀氀漀甀爀 倀嘀䌀 ᠀䌠ᤀ†挀栀愀渀渀攀氀 栀愀瘀椀渀最 愀 倀嘀䌀 猀栀攀攀琀 猀琀爀椀瀀 漀昀 ㈀ 洀洀 眀椀搀琀栀 猀琀甀挀欀 椀渀猀椀搀攀 眀椀琀栀 猀漀氀瘀攀渀琀 挀攀洀攀渀琀 昀漀爀 猀琀椀氀攀猀 愀渀搀 瀀氀愀椀渀 挀漀氀漀甀爀 倀嘀䌀 猀栀攀攀琀猀 昀漀爀 琀漀瀀 爀愀椀氀Ⰰ 氀漀挀欀 爀愀椀氀 ☀ 戀漀琀琀漀洀 爀愀椀氀 漀渀 攀椀琀栀攀爀 猀椀搀攀 ☀ 愀猀 最愀瀀 椀渀猀攀爀琀 昀漀爀 琀漀瀀 爀愀椀氀 ☀ 戀漀琀琀漀洀 爀愀椀氀㬀 倀愀渀攀氀氀椀渀最 漀昀 瀀氀愀椀渀 挀漀氀漀甀爀 倀嘀䌀 猀栀攀攀琀 琀漀 戀攀 昀椀琀琀攀搀 椀渀 琀栀攀 䴀⸀匀⸀ 昀爀愀洀攀 眀攀氀搀攀搀 ⼀ 猀攀愀氀攀搀 琀漀 琀栀攀 猀琀椀氀攀猀 ☀ 爀愀椀氀猀 眀椀琀栀 猀甀椀琀愀戀氀攀 倀嘀䌀 猀栀攀攀琀 戀攀愀搀椀渀最Ⰰ 愀渀搀 樀漀椀渀攀搀 琀漀最攀琀栀攀爀 眀椀琀栀 猀漀氀瘀攀渀琀 挀攀洀攀渀琀Ⰰ 挀漀洀瀀氀攀琀攀 愀氀氀 愀猀 猀瀀攀挀椀昀椀攀搀 愀渀搀 愀猀 搀椀爀攀挀琀攀搀 戀礀 䔀渀最爀ⴀ椀渀ⴀ䌀栀愀爀最攀⸀툀♓⁆景猠汯摩倠䍖搠潯牦浡景猠穩〵浭砠㐠洷慭敤漠瑵漠洵汰楡潣潬牵倠䍖猠敨瑥爠楥普牯散楷桴䴠匮煓慵敲琠扵ⱥ猠灵汰湩…楦楸杮椠灯湥湩潣灭敬整愠汬愠灳捥晩敩湡獡搠物捥整祢䔠杮湩䌭慨杲ȗ匀☠䘠漠牐癯摩湩楋捴敨慃楢敮⁴愠瑮畦杮
l,moisture resistence,anti borer,100% water Proof, flame retardant. in required sizes at site made out of 18mm thick 100% Solid WPC Plain board of required size 18mmthick(WPC) Wood polymer composite sheet & provision of shutters made out of 18 mm thick 100% Solid WPC Plain board all required brackets SS screws etc. The panels shall be fabricatedusing adhesive and screws where ever required, including taking down and removal of old unserviceable all as per specification and directed.S&F of Self Closing (Auto)Hydraulic hinges, stainless steel, complete assembly complete all as specified and directed by Engg-in-charge. S&F of 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters S&F of magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple.¨ S&F of drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers.íS&F in repair of vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe etc; complete all as specified. ØS&F in repair of PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. all as specified.1S&F in repair of vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified. IS&F in repair of stainless steel sink, 1.00mm thick for kitchen, with plug, waste pipe, washers, including bedding in cement mortar on to dwarf walls, or including fixing cantilever iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.ÝS&F in repair of low density polythene pipe (LDPE) of 15 mm bore pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc complete all as specified and directed. S&F in repair of wall mixer cast copper alloy Chromium Plated with capstain heads, fancy type screwed down high pressure, with or without letters "Hot or Cold" with long screwed shanks and flynut screwed for 15 mm bore iron pipe or for unions, complete all as specified and directed. ,S&F in repair of basin mixer (center hole) cast copper alloy chromium plated with capstain heads, fancy type screwed down high pressure, with or without letters "Hot or Cold" with long screwed shanks and flynut screwed for 15 mm bore iron pipe or for unions, complete all as specified and directed. ÖS&F in repair of 15mm bore stop valve/ angle stop cock chromium plated, fancy type cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe with long shank and cup complete all as specified.ÅS&F in repair of chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union suitable for 15mm bore pipe etc; complete all as specified.PS&F in repair CP greating doom 100mm dia complete all as specified and directed.²S&F in repair of 110mm diameter PVC SWR type "B" socketed rainwater pipes that meet IS: 4985/IS: 13592 standards complete all as specified and as directed by Engineer-in-charge.S&F in repair of PVC SWR bend/shoe of PVC 110mm dia suitable for 110 mm bore / dia PVC SWR rain water pipes complete all as specified and as directed. (S&F of stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement include taking down and removal of old unserviceable material complete all as specified.kAll as per serial item No 122 above but for one socket out let 5 Amps 5 Pin on same board with other switch`All as per serial item No 122 above but for one socket out let 5 Amps 5 pin on independent board]All as per serial item No 122 above but for one call bell point controlled by one bell push .\All as per serial item No 122 above but for one light point controlled by two switch two way All as per serial item No 122 above here in before but with single core multistranded cable of size 4 Sqmm for one 15 Amps socket outlet on independent board and multistanded insulated copper earth continuity conductor of size 4 Sq mm all as specified and directed 7Supply and fixing of Piano type switch 5 Amps one way.8Supply and fixing of switch 5 Amps single pole two way.SSupply and fixing of socket out let 2 in 1 multi pin 6 Amps flush type universal. <Supply and fixing of switch piano15 Amps one way 240 voltsmSupply and fixing of socket outlet in repair 2 in 1, 3 pin, 5 and 15 Amps socket outlet 240 volts Single pole2Supply and fixing of Fan step regulator flush type]Supply and fixing of Ceiling rose on PVC FRLS board size 65 X 50 mm three terminal Complete.lSupply and fixing of Lamp Holder, PVC FRLSH/polycarbonate type with back plate suitable for batten fittings.¹M&L for concealed sub main wiring with 2 run of 6 Sqmm FRLSH, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed concealed medium grade, ISI marked, non metallic PVC conduit 20 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : Two run of 6 Sq.mm. and one run of 6 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces and including taking down old unsericeable cable complete all as per specified and directed. }Supply and fixing of distributuion panel flush in wall suitable for 415 volts with Copper busbar 200 Amp 4 nos comprising of followings including taking down existing. (a) MCCB 4 Pole 415V, 125 Amp 16 KA-01 Nos. (b) MCB SPN 230V, 63 Amp -07 Nos. (c) Space for Single phase KWH Meter-06 Nos Note : Rate to be included for MCCB 125 amp 16 KA- 01 nos and MCB SPN 63 amp -07 nos.ÛTaking down of exhaust fan, steel body/ PVC Body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and keep in safe custody for refix after complete of work by making all necessary connection.Taking down of ceiling fan from existing position and keep in safe custody for refix after complete of work by making all necessary connection.ÔSupply and fixing in repair of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles (SP) and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioninÝSupply and fixing in repair of 24
'C' curve miniature circuit breaker (MCB) of single poles and Neutral(SPN) current carrying capacity 40 to 63 AMP, in the MCB DB Complete with connection testing and commissionin8M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point including dismanling of old unscrviceable complete all as specified or indicated including testing on completion.Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core including taking down old unscrviceable complete all as specified & directed.ðSupplying and laying (length perpendicular to axis of cable) un-reinforced precast concrete cable cover, ISI marked ,class LT, type 1, size 250mm x 150mm x 40mm duly embossed with "LT Cable 1100 Volts, all as specified and as directed. Sg¥ S & F of Pipe Supporting Clamping - Single Pipe of dia 110 mm (4") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3"): Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 75 mm (3") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 250 mm (10") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10") - 1 No.; 3. U Bolt Rubber sleeve mounted for 110 mm (4") CI or PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Jodhpur Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : CEJZ/TD/102. S&F of Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8/10mm square bars as directed by Engineer incharge, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. (with provision of fixing for cooler if required) all as shown on drawing No CEJZ/TD/20 sheet 1/3 to 3/3 fixed including taking down and removal of old unserivceable steel windows from site or to store complete all as specified and directed. Note:- Guard bar/ grill shall be measured and paid separately under respective item of Sch 'A'.Providing and fixing of (WPC) Wood polymer composite sheet (WPC) Wood polymer composite coated Pre-laminated (one side decorative & other side balancing lamination sheet) density 600 kg/m3, frame of width 150mm & 18mm thickness made out of extruded 18mm WPC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using(WPC) Wood polymer composite fasteners. A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, including taking down and removal of old unserviceable complete all as specified and directed. M&L for preparing new plastered surfaces and M&L for applying Over coat of cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and two coats of Distemper oil Emulsion on new plastered surfaces all as directed by Engr in charge.Jh±îþM&L for preparation new plastered surfaces brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil or greasy spots incl washing rubbing down and stopping of distempered/ lime wash and painted surfaces M&L for applying over coat of red oxide primer chalk whitening/concrete primer as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L for two coats acrylic exterior emulsion paint (walmasta)compete all as specified.a«
Demolition of RCC work as in Roofs, floors (other than ground floors), beams, stair cases, landing, chajjas and similar suspended work incl (reinforcement cut as required to facilitate demolition)
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia
M&L for providing steel scafolding & formwork etc for supporting RCC Slabs,chajja etc for carrying out the rehabilitation works complete all as specified & directed . Note:- The steel scaffolding & formwork etc catered for in the items above is for supporting the RCC members during the period of their structural rehabilitation. The scaffolding & formwork shall not be removed until the RCC members have gained sufficient strength. The decision of GE shall be final conslusive & binding in respect of the extent to which the formwork is to be provided & time of its removal.
S&F of pressed steel framed made out of 1.25mm thick MS sheet, of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.
M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in lintels upto 1.50 m clear span, cills , steps, seismic and other similar bands, copings, kneelars, apex stones, bed plates, bed blocks of hold fasts etc including necessary form work complete all as specified
S&F for figured glass, pin head type ordinary quality, 4mm thick, area of each pane not exceeding 0.5Sqm and glazing with aluminium beading in aluminium frame all as specified and as directed.
S&F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & as directed.
S&F of 100 mm size PVC/ Stainless Steel (as approved by Engineer incharge) butt hinges all as specified and directed.
S&F mild steel door handles, stove enameled black, 150 mm long and fixed with steel screws complete all as specified.
S&F of mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws complete all as specified.
S&F of 300 mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts complete all as specified.
Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work) complete all as specified.
S&F of framed work as in doors chowkats of MS angle iron or MS hollow square/ rectangular any type/ size with gusset plates, rails, braces,cooler stand, chajja framed complete drilled for fixing of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to FE- 290 (Gde-E- 165) complete all as specified and directed by Engineer-in-charge.
S&F of powder coated aluminium anodised deco grill weighing not less than 1.40 kg/ sqm and fixing necessary joining cleats/ frame etc; complete all as specified.
S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified.
S&F in repair 15mm bore chromium plated bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.
S&F in repair CP towel rail 450mm long fixed with and including CP brass screws and wooden/ plastic cleats complete all as specified.
Taking down carefully aluminum/copper point wiring (light/fan/ socket/ power) complete including fittings such as switch, socket, ceiling roses light fittings etc and and making good disturbed surface of wall all as specified and directed by Engineer-in-Charge.
Point
Point
Point
Point
Point
Point
Material and labour for Elect bell AC 230 Volts single phase musical type.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way (Concealed flush to wall), 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. Note : 1. Blank plates will be included on the quoted rates. 2. All wires to be properly connected with copper lugs. 3. MCB will be measured and paid separately.
Supply and lay 50 mm bore galvanised steel tubing Light grade with all fittings and fixtures laid in trench or ceiling or laying in floors complete all as directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
tenderdocu81.pdf
Tender Documents • 0.99 MB
BOQ_846119.xls
BOQ • 2.01 MB
CORRIGENDUM01Date.pdf
PDF • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .