Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹53.0 LAccepted-AOC | 1 | Accepted-AOC MINUTES OF FINANCIAL BID OPENING of Financial Incentive works | |
| 2 | 2₹55.1 L+₹2.2 L (4.12%)Rejected-Finance | 2 | Rejected-Finance MINUTES OF FINANCIAL BID OPENING of Financial Incentive works |
Tender Value
₹53.0 L
EMD Value
₹50,000
Closing Date
26 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chief Engineer, KSRRDA
Kerala State Rural Roads Development Agency 3rd Floor, Revenue Complex, Public Office Compound, Vikas Bhavan P. O. Thiruvananthapuram, Kerala PIN-695033
2023-24 Periodic Maintenance of road Package No KR0384 Mundanmala Vazhappilly road in Thodupuzha Block, Idukki District- using Financial Incentive 2022-2023 received under Pradhan Mantri Gram Sadak Yojana (Kerala)
2023_KSRD_125131_7
01/2023/CE/KSRRDA/PMGSY
Open Tender
Civil Works - Roads
Item Rate
180 days
KSRRDA
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,760
₹50,000
Yes
26 Jul 2023
15 May 2023
27 May 2023
15 May 2023
26 May 2023
15 May 2023
Amount
MUNDANMALA VAZHAPPILLY ROAD (1.754km)
CLEARING AND GRUBBING
Clearing Grass and Removal of Rubbish - Clearing grass and removal of rubbish upto a distance of 30m outside the priphery of the area as per technical specification Clause 200.1
Pavement components
Excavation in soil using Hydraulic Excavator and Tippers with disposal upto 1000m - Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections and transporting to the embankment location with a lift upto 1.5m and lead upto 1000m as per technical specification Clause 302.3- Slip earth removal
Construction of embankment with material obtained from Roadway cutting - Construction of embankment with approved material deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Table 300.1 and 300.2 as per technical specification Clause 301.5- Shoulder filling
Granular Sub-base with well graded material (Table 400.1)-By Mix in Place Method- For Grading I material -Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotovator at OMC, and compacting with smooth wheel roller to achieve the desired density as per technical specification Clause 401
Wet Mix macadam -providing, laying, spreading and compacting stone aggregates of specified sizes to wet mix macadam at OMC in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform thickness in sub-base / base course on a well prepared sub-base and compacting with smooth three wheel 80-100 kN static roller to achieve the desired density including lighting, barricading and maintenance of diversion etc as per table 400.11 & 400.12 and as per technical specification Clause 406
Bituminous layers
Prime Coat - Low porosity-providing and applying primer coat with bitumen emulsion (Packed SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at a rate of 0.70 - 1.00 kg/sqm using mechanical means as per technical specification clause 502
Tack Coat - Providing and applying tack coat with bitumen emulsion (Packed RS-1) using emulsion distributor at a rate of 0.25 - 0.30 kg/sqm on the prepared granular surface treated with primer & cleaned with Hydraulic broom as per technical specification clause 503
Tack Coat - Providing and applying tack coat with bitumen emulsion (Packed RS-1) using emulsion distributor at a rate of 0.20 - 0.25 kg/sqm on the prepared bituminous surface cleaned with Hydraulic broom as per technical specification clause 503
Mix Seal Surfacing - Mechanical Means - Type A - Providing, laying and rolling of close-graded premix carpet of 20mm thickness composed of 11.2mm to 0.09mm (Type-A) or 13.2mm to 0.9mm (Type-B) aggregates either using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kn roller, finished to required level and grades as per technical specification clause 509- Using Bitumen Bulk S-65 by Mechanical Means
Cement Concrete Pavement
Cement Concrete Pavement - Construction of un-reinforced dowel jointed at expansion and construction joint only,plain cement concrete pavement ,thickness as per design,over a prepared sub base,with 43 grade cement or any other type as per clause 1501.2.2 M 30 (grade),coarse and fine aggregates conforming to IS383,maximum size of coarse aggregate not exceeding 25 mm,mixed in a concrete mixer of not less than 0.2cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork spreading the concrete with showels,rakes,compacted using needle, screed, and plate vibrators and finished in continuous operation including provision of contraction and expansion ,construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge /culvert and construction joints, admixtures as approved,curing of concrete slabs for 14 days,using curing compound and water finishing to lines and grade as per drawing and TechnicalSpecifications clause 1501
CD works
PCC Grade M 20 - Providing concrete for plain/reinforced concrete for wearing coat complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2:4
Plastering with cement mortar 1:4, 12 mm thick,one coat on concrete work as per technical specification Clauses 613.4 & 1204
Painting Two coats on New Concrete Surfaces - Painting two coats icluding primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and technical Specification
Printing new letters and figures of any shade - printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give a even shade as per drawings and technical specifications clause 1701- English and roman
Protection Works
Excavation for Structures - Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material : Ordinary soil : Upto 3 m depth
PCC Grade M 10 - Providing concrete for plain/reinforced concrete in substructure complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:3:6
PCC Grade M 15 - Providing concrete for plain/reinforced concrete in substructure complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2.5:5
Side Drains
Surface Drains in Soil - Construction of unlined surface drains of average cross sectional area 0.40sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3.0m and lead of 50m as per technical specification Clause 307 - By Mannuall Means.
Excavation for Structures - Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material : Ordinary soil : Upto 3 m depth
PCC Grade M 10 - Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:3:6.
PCC Grade M 15 - Providing concrete for plain/reinforced concrete in substructure complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2.5:5.
PCC Grade M 20 - Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix
Thomas George
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_198939.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .