Urgent mechanical works to be carried out at lift irrigation scheme Sagipora, Unisoo New and Gangbugh 1st of MISD Handwara.

Amount

Replacement of DE bearing of 75 HP horizontal electric motor at LIS Sagipora by way of disconnecting all leads from motor and marking the terminals, uncoupling of motor from pump. Opening the end cover of DE bearing housing. Carefully extracting the old damaged bearings from the housing with the help of bearing puller etc. and fitting new bearing at its place. Refitting back motor parts, coupling and alignment with pump and testing of motor on full load at site.

Replacement of NDE bearing of 75 HP horizontal electric motor at LIS Sagipora by way of disconnecting all leads from motor and marking the terminals, uncoupling of motor from pump. Opening the end cover of NDE bearing housing. Carefully extracting the old damaged bearings from the housing with the help of bearing puller etc. and fitting new bearing at its place. Refitting back motor parts, coupling and alignment with pump and testing of motor on full load at site.

Providing and fitting of new bearing no. N314 of ZKL/ARB/NBC or equivalent make with adequate greasing at Lift Irrigation Scheme Sagipora.

Providing and fitting of new bearing no. 6311 of ZKL/ARB/NBC ZKL/ARB/NBC or equivalent make with adequate greasing LIS Sagipora.

Dismantling of old damaged coupling set at site. Providing and fitting TC-16 coupling set complete for pumping unit along with flexible rubber tyre at Lift Irrigation Scheme Sagipora. Taking dimensions of prime mover shaft and pump shaft at site and then boring the CI coupling halves as per site requirement on lathe machine at workshop. Complete linear and angular alignment of prime mover and pump shafts for smooth operation including providing and fitting of coupling bolts. Testing pumping unit on full load at LIS Sagipora

Repairs/periodic maintenance of 250 mm foot valve installed on suction line at LIS Unisoo new by way of extraction of foot valve from their installed position by means of cutting damaged/ rusted/ worn-out bolts The job includes reconditioning of hinges, hinge bolts, weight plate, valve seat, valve body by way of welding, patching, grinding etc. Providing and fitting of rubber insertion cloth replacing the rusted/damaged parts, nuts, bolts, hinges etc. as per requirement, cutting the old damaged/rusted MS bars of strainer and providing and fitting of new MS bars. Re-fitting to suction line and testing on full load. The job includes to and fro carriage charges from site to workshop through a lead of approx. 40 km in mechanical transport.

Repairs/periodic maintenance of 150 mm dia. foot valve installed on suction by way of extraction of foot valve from their installed position by means of cutting damaged/rusted/worn out bolts The job includes reconditioning of hinges, hinge bolts, weight plate, valve seat, valve body by way of welding, patching, grinding etc. Providing and fitting of rubber insertion cloth replacing the rusted/damaged parts, nuts, bolts, hinges etc. as per requirement, cutting the old damaged/rusted MS bars of strainer and providing and fitting of new MS bars. Re-fitting to suction line and testing on full load at Lift Irrigation Scheme Gangbugh 1st.

Providing and fitting of MS nuts and bolts of assorted sizes.

Providing and fitting of spare TC-13 rubber tyre coupling element with coupling bolts at Lift Irrigation Scheme Gangbugh 2nd.

Meer Engineers

M/S EURO LIGHT ENTERPRISES