Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.0 LAccepted-AOC 303 GHS 888 SECTOR 20 PANCHKULA 134116 HARYANA | PANCHKULA | PANCHKULA | HARYANA | 134116 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹46.7 L+₹6.8 L (16.9%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹50.8 L+₹10.8 L (27.0%)Rejected-Finance | L3 | Rejected-Finance Being L3 |
Tender Value
₹62 L
EMD Value
₹1.2 L
Closing Date
9 Dec 2020, 6:00 pmClosed
GE I R AND D Chandigarh
Plot No 02 Sector 37A Chandigarh
SPECIAL REPAIR REPLACEMENT OF BER SUMMER APPLIANCES AND OTHER E M EQUIPMENT AT TBRL RAGE RAMGARH
2020_MES_390383_1
GE I R AND D/CHD-62/2020-21
Open Tender
Civil Works
Item Rate
270 days
Ramgarh
All as per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹1.2 L
Yes
17 Dec 2020
11 Nov 2020
11 Dec 2020
11 Nov 2020
9 Dec 2020
25 Nov 2020
Amount
Supply and fixing refrigerant copper tubing 1/2" with 22 SWG as per site requirement including making joints complete all as specified and directed.
Supply and fixing for refrigerant copper tubing 1/4" with 22 SWG as per site requirement including making joints complete all as specified and directed.
Supply and fixing for insulation for copper tubing of size1/2" & 1/4" as per site requirement complete all as specified and directed.
Supply and fixing for DP MCB 32 Amp with enclosure suitable for AC point complete all as specified and diredted.
Material and labour for sub main wiring with two runs of single core, PVC insulated, unsheathed ,multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade and one run of 6 Sqmm PVC insulated earth continuity copper conductor cable drawn through and inculding suitable size of PVC concealed conduit with all necesary accessories such as bends, tees, junctions boxes, elbows etc complete including cutting chases on walls and making good the disturbed surfaces with all in coming and out going cable connections complete all as specified and as directed. (Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as unit length).
Material and labour for sub main wiring with two runs of single core, PVC insulated, unsheathed ,multi standard copper conductor cable of size 2.5 Sqmm, 1100 volts grade and one run of 2.5 Sqmm PVC insulated earth continuity copper conductor cable drawn through and inculding suitable size of PVC concealed conduit with all necesary accessories such as bends, tees, junctions boxes, elbows etc complete including cutting chases on walls and making good the disturbed surfaces with all in coming and out going cable connections complete all as specified and as directed. (Note : Two runs of 2.5 Sqmm cable, one run of 2.5 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as unit length).
Supply and fxing for ball brass valves of size 15 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.
Material and labour for galvanised iron pipe medium grade of dia 15 mm including all fittings like elbows, bends, nipples, tees, plugs and unions etc. complete for supply of water to tank of Desert Cooler by tapping from water mains line complete all as specified and directed.
Supply and fixing for MCB, 4-pole, rating 63 Amps, C-Type, breaking capacity 10 KA, 415 volts, complete all as specified and directed.
Supply and fixing for MCB, SP, rating 32 Amps, C-Type, 230 volts, complete all as specified and directed.
Supply and fixing for MCCB, 4-pole, rating 125 Amps, breaking capacity 25 KA, 415 volts, complete all as specified and directed.
Supply and fixing for Sheet metal enclosure for DB’s TPN, with 200 amps rated bus bar, 4 way, 415 volts double door complete all as specified and directed.
Supply and fixing socket outlet,6 Amps/16 Amps 2/3 pin combined shuttered moduler type 2 Module of apporved colour complete all as specified and directed.
Supply and fixing Modular switch one way 16 Amps, 1 module type of apporved colour complete all as specified and directed.
Supply and fixing for modular white cover plate with frame, 3 Module complete all as specified and directed by Engr-in-Charge.
Supply and fixing for modular metal flush box, 3 Module complete all as specified and directed by Engr-in-Charge.
Supply and laying of UG cable XLPE insulated armoured heavy duty elect cable with stranded aluminium conductor 1100 volts grade cross section area 25 Sqmm 3.5 core laid in trenches/ fixing on panels/walls/poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and directed.
All as per serial item No 17.00 above but of cross sectional area 16 Sqmm, 4 core.
Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables, erection of poles,struts, stays etc and getting out all as specified and directed by Engr-in-Charge.
Material and labour for GI Pipe light grade with all fittings & fixed complete on walls/floors etc for cable protection of size 40 mm dia complete all as specified and directed by Engr-In-Charge.
Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested, poles,stays,struts hane been erected and tested complete all as specified.
Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified.
Material and labour for for clean dry sand laid in trenches/ducts for bedding and cushioning to cable, including spreading and levelling complete all as speccified.
Material and labour for laying in trenches burnt brick sub class 'B' for cable protection laid adjacent to each other length wise perpendicular to the central axis of cable complete all as specified.
Supply and fixing for PVC Connections 15mm size with PTMT nuts of length 450mm for hot / cool water all as specified and directed by Emgr-in-charge.
Supply and fix for brass water meter 20 mm dia class B, multijet domestic type confirming to IS 779-1994 complete all as specified and directed Make- Kranti or equivalent make approved in UT Chandigarh
Supply and fix for brass nipple and nuts suitable for 20mm dia water meter complete.
Supply and fixing for mono-block type water pumping set having suction & dischage size 25 x25mm and discharge capacity of 2000 LPH at 28.5 mtr head, self priming type 0.5 HP (0.37 KW) single phase, 220 Volt and fixing with siutable size bolts, nuts washers etc.duly grouted in PCC. Make: Havells Cat No MHPAAE0X50 Eqvt CG/Bhart Bijali.
Material and labour for point wiring concealed type with PVC insulated, unsheathed, single core two run multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories and concelled GI steel boxes suitable for moudular type fittings, cover frame and brass screws with cup washers for fixing of modular switches / socket / regulators etc including all necessary wall cutting chases including suitable size modular flush box and modular cover frame and making good disturbed surfaces in cement mortar 1:3 for the following, complete all as specified and directed.
All as per serial item No 29.00 here-in-before but for one 15 Amp, socket outlet point controlled by one switch and wiring with 2.5 Sqmm PVC insulted, stranded, unsheathed copper conductor cable & 2.50 Sqmm unsheathed PVC insulated earth wire on Independent board.
supply and fix for switch one way 6 Amps,single pole,230 volts moduler type of apporved colour Make:-Crabtree cat part No-ACASXXW061 or eqv make of Legrand/ABB complete all as specified and as per directed.
supply and fix for switch one way 16 Amps,single pole 230 volts moduler type of apporved colour Make:- Crabtree Cat part No:- ACMSXXW161 or eqv make of Legrand/ABB complete all as specified and as per directed.
Supply and fixing for ceiling rose surface bakelite 65 x 50 mm two to three terminal complete all as specified and as directed.
Supply, install, test and commissioning of Diesel Engine driven fire fighting pump set of capacity not less than 45KW/60HP suitable for automatic operation for fire fighting complete for delivery of water at the rate of 2850 LPM at 70m head and runnign at 2850 RPM so as to maintain a minimum pressure 3.5 Kg/Sqcm at the end of delivery side of pup with pressure gauge and bypass arrangement for periodic testing of working of fire fighting pump set. Suitable Diesel Engine with and inlcuding common base plate of MS channel and foundation (RCC/PCC) all as per manufacture instruction design and vibration resistant complete all as directed and as specified below. Make : Kirloskar/KSB/CG (a) The pump shall be horizontally mounted, split casing, centrifugal complete for delivery of abovee mentioned discharge against desired mentioned head so as to ensure a minimum presssure at the highest and farthest outlet at teh specified flow complete with necessary connections for fixing strainers, succsion and delivery pipe, sluice valve, NRV, pressure gauge, presure switch including bypass arrangement for periodic testing of the working of the pumps et as well as testing ofautomation with required length and size of medium class GI Pipe and control vavles for proper completion of work. The pump shall be capable of giving 150% of rated discharge at head not less than 65% of rated head. The pump shall be provided with mechanical seals. The impeller shall be enclosed type and accurately balanced dynamically. The pump casing shall be of cast iron, impeller shall be of bronze and shaft shall be of stainless steel. (b) Diesel Engine suitable for the above pump and flexible coupling with the pump. THe diesel engine shall be rated for continuous duty and shal lhave HP rating necessary to driven the pump at 150% of its rated discharge at 65% of rated head. (c) Common bed plate of fabricated mild steel channel or cast iron type (d) Suitable cement concrete pump foundation and vibration clamping arrangement as required, with foundation bolts, anti vibrant pads, washers etc. (e) Pressure switch for automatic operation including necessary wiring upto control panel. (f) LT UG cable 1100V PVC insulated and PVC seated copper Cable 3 Core of suitable size 2 runs from starter to pump set including provision of GI protection pipe of suitable size in floors are deemed to be included in the item rate
Supply, installation, testing and commissioning of electric motor driven jockey pump set of capacity not less than 15 HP suitable for automatic operation of fire fighting complete for delivery of water at the rate of 180 LPM at 70m head and running at 2850/2900 RPM with pressure gauge, squiral cage induction motor suitable for 415V, 3 Phase, 50 Hz complete with all including all accessories and common base plate of MS channel and foundation (RCC/PCC) all as per manufacturer instruction/design and vibration resistant complete all as directed by Engineer-in-Charge. Note for item Ser No 2:- (i) The cost for pipe, sluice valve and NRV required for bypass arrangement will deemed to be included in above quoted rate. (ii) LT UG cable 1100 Volt PVC insulated and PVC sheathed copper cable 3 core of suitable size 2 runs from starter to pump set including provn of GI protection pipe of suitable size in floor are deemed to be included in quoted unit rate.
Supply, Installation , testing and commissioning of HT 11 KV, 25 KA FOR 0.1 sec, 3 Phase, 50 Hz 3 wire totally enclosed metal clad vermin and weather proof , extensible type, indoor, floor mounted, horizontal draw out, vertical isolation type Vacuum Circuit Breaker 400 Amps motor operated spring charged having rupturing capacity 250 MVA of capacity 400 Amps with side cable box for incoming and out going HT 11 kv cables comprising of the following:- (a) INCOMERS:- (A) vacuum circuit breakers(VCB) indoor type 11KV, 400A, 25kA/0.1 Sec, Indoor VCB with Horizontal Draw out, with side cable box ifor incoming and outgoing HT 11 KV cable, 230V AC Motorised Mechanism, CU Busbars with PVC Sleeve 1250 Amp, Degree of Protection - IP4X, Shunt Trip/Close coils - 24VDC, Aux. Contactor 4 NO+ 4 NC, Power Pack (B) EPOXY RESIN CAST V.T., 3 Ph,D/O TYPE, 11KV/Sqrt. 3/ 110V/Sqrt. 3,Class-1, Burden-100 VA-Line PT (c) EPOXY RESIN CAST,1-Ph CT, 100-50/5-5A,CL-1/5P10/PS,Burden-15VA (d) Digital Ampere Meter with S/S (e) Digital Volt Meter with S/S (f) Mutifunction meter-Digital type multi function meter with (TVM) metering for KWH, KVAR, max demand, voltage, Amps, Power factor, frequency alongwith suitable size of power pack for Bty back up supply of VCBs & all as per specified and directed. (g) INDICATING LAMPS LED TYPE-BREAKER ON - Red, BREAKER OFF - GREEN, AUTO TRIP INDICATION - Amber, TRIP CIRCUIT Healthy - CLEAR, SPRING Charged - Blue, R,Y,B Indication (h) Trip Neutral Close Switch (j) Panel Space Heater with Thermostat (k) Panel Illumination Lamp with Switch (l) 3 Pin Plug connector (m) MCB for AC and DC (n) Hooter (p) RELAYS - Numerical 3O/C+1E/F Non Communicable Relay, Non Draw out type, Master Trip Relay Note:-(i) Prior approval of schematic diagram and BoQ of the panel shall be obtained from GE . (ii) Charging of VCBs shall be motorized as well as manual type. (iii) Factory testing shall be carried out by GE. (vi) Testing & commissioning will be done in supervision of company rep and all the necessary engineering requirement shall be full filled by the Contractor required at site. (v) Any minor repair of civil work during installation of VCB panel shall be carried our by contractor. Engr-in-Charge decision in this regards is final. (vi) Before quoting the rate contractor should visit the site for any ambiguity. (vii) Contractor should provide schematic diagram & operating procedure & shock treatment chart on laminated sheet & framed in respective Sub stations. (viii) Relay testing & reports should also be carried out by contractor through company authored rep.
All as per serial item 36.00 herein before but rapturing capacity 350 MVA of rating 630 Amps complete all as specified and directed.
Material and labour for earthing complete with copper earth plate 600x600x3.15mm thick electrode and 20x3 mm copper strip as earthing lead buried directly in ground (Earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 Mtr below normal ground connected to copper strip earth lead by means of bolts, nuts, check , nuts and washers of copper all as shown on electrical plate no. 3 including 40 mm dia medium grade GI protection pipe, 20mm dia GI medium grade watering pipe, funnel, wire mesh , charcoal dust, PCC pit and 50mm thick RCC cover, earth work in any type of soil connected to earthing test point complete all as specified and as directed. (Note : Copper strip & GI pipe 40mm dia beyond 7.5mtr length from earth plate shall be measured & paid separately under respective item)
Earthing complete with galvanised steel earth plate electrode 60cmX60cmX6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not than 1.5mtr below normal ground level connected to GI earth strip of size 32x6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC M-10(Nominal mix) using 20mm graded stone aggregate, 50mm thick earth pit cover of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape, PGI funnel, wire mesh and 20mm bore GI water pipe medium grade and 40mm bore medium grade GI pipe for protection of earth strip from plate to main switch board, common salt, charcoal dust including testing on completion complete all as specified and as directed all as shown in electrical plate No. 3 including testing on completion and making good the disturbed surfaces of wall floors etc without claiming extra cost all as directed by Engr-in-Charge. (Note: GI strip & GI pipe beyond 7.5Mtr length from earth electrode shall be measured and paid separately).
Supply, laying in trenches, testing and commisioning XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with standard aluminium conductor, 11000 volts (earthed) grade having cross sectional area 120 Sqmm 3 core complete all as specified and directed.
Supply and fixing cable jointing kit for 11 KV (earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm complete all as specified and directed.
Supply and fixing cable jointing kit for 11 KV (earthed) grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm complete all as specified and directed.
Fixing only and testing High Wall Split Type Air Conditioner (3 star) indoor and outdoor unit of 1.5 ton capacity single phase, 230 volt, AC 50 Hz complete all as specified and directed. (Note : Air conditioner with all accessories shall be issued by the department under Sch B free for fixing.)
Fixing only and testing of High Wall Split Type Air Conditioner (3 star) indoor and outdoor unit of 2.0 ton capacity single phase, 230 volt, AC 50 Hz complete all as specified and directed. (Note : Air conditioner with all accessories shall be issued by the department under Sch B free for fixing.)
Fixing only electronic Voltage Stabilizer of capacity 4 KVA complete all as specified and directed. (Note : Electronic Voltage Stabilizer shall be issued by the department under Sch B free for fixing.)
Fixing only electronic Voltage Stabilizer of capacity 5 KVA complete all as specified and directed. (Note : Electronic Voltage Stabilizer shall be issued by the department under Sch B free for fixing.)
Fixing only evaporative type desert cooler with complete all as specified and directed. (Note : Evaporative type desert cooler shall be issued by the department under Sch B free for fixing.)
Fixing only ceiling fans 1200mm sweep including necessary connection with flexible wire of suitable size complete all as specified and directed. (Note : Ceiling fans shall be issued by the department under Sch B free for fixing.)
Fixing only exhaust fan 230 mm sweep with louvers including necessary connection with flexible wire of suitable size complete all as specified and directed. (Note : Exhaust fan shall be issued by the department under Sch B free for fixing.)
Fixing only exhaust fan 380 mm sweep with louvers including necessary connection with flexible wire of suitable size complete all as specified and directed. (Note : Exhaust fan shall be issued by the department under Sch B free for fixing.)
Fixing only exhaust fan 450/480 sweep with louvers including necessary connection with flexible wire of suitable size complete all as specified and directed. (Note : Exhaust fan shall be issued by the department under Sch B free for fixing.)
Fixing only exhaust fan 600 sweep with louvers including necessary connection with flexible wire of suitable size complete all as specified and directed. (Note : Exhaust fan shall be issued by the department under Sch B free for fixing.)
Fixing only table/wall mounted fan 230mm sweep complete all as specified and directed. (Note : Table/wall mounted fan shall be issued by the department under Sch B free for fixing.)
Fixing only storage type electric water heater of capacity 50 Ltrs, including suitable size mounting bolts, nuts and washers duly grouted complete all as specified and directed. (Note : Water heater shall be issued by the department under Sch B free for fixing.)
Fixing only storage type electric water heater of capacity 25Ltrs, including suitable size mounting bolts, nuts and washers duly grouted complete all as specified and directed. (Note : Water heater shall be issued by the department under Sch B free for fixing.)
Fixing only, testing and commissioning of servo voltage stabilizer of capacity 50 KVA including filling of transformer oil complete all as specified and directed. (Note : Servo voltage stabilizer with first filling transformer oil shall be issued by the department under Sch B free for fixing.)
Fixing onlyand testing and commissioning of servo voltage stabilizer of capacity 75 KVA including filling of transformer oil complete all as specified and directed. (Note : Servo voltage stabilizer with first filling transformer oil shall be issued by the department under Sch B free for fixing.)
shree balaji builders
MARC INSULATIONS INDIA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .