752851 ADDN ALTN CUM SPECIAL REPAIR OF OTM ACCOMMODATION OF SRC PRC MH AT RAMGARH

Amount

SCHEDULE "A"

Item No 01 : Dismantling AC/ CGI( corrugated, semicorrugated,etc), as in roof covering complete all as specified and as directed.

Item No 02 : Dismantling of timber scantling 40 Sqcm and over in section in any position complete all as specified and as directed.

Item No 03 : Dismantling of wooden scantling under 40sqcm and below in section fixed in any position as in framed work complete all as specified and as directed.

Item No 04 : Dismantling of roof trusses, purlin, rails fastening, etc, of steel section complete all as specified and as directed.

Item No 05 : Dismantling wall and ceiling boarding of any descripion , thickness incl. cover fillets complete all as specified and as directed.

Item No 06 : M&L for providing aluminium snap Grid frame work for false ceiling with of size 605X605 mm ,using Main and cross tee of size 36.5mm X 25mm X 1.4mm, weighing 0.24 kg/RM and 23.5mm X 36.4mm X 1.4mm weighing 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia MS wire/GI wire, J bolts, nuts and washers as per manufacturer's complete all as specified.

Item No 07 : S&F 6 mm thick exposed metal frame coiling with calcium silicate board of silicous and calcareous material reinforced with cellulose fiber for fixing in 600 mm x 600 mm grid complete all as spcified. (Note : frame work for ceiling shall be measured and paid separately)

Item No 08 : M&L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre

Item No 09 : M&L Seamless calcium silicate ceiling made out of 1800 x 1200mm x 12mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish (Frame work for ceiling shall be measured & paid separately)

Item No 10 & 11 : Blank

Item No 12 : S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified & directed.

Item No 13 : M&L roof trusses (framed ), trussed, purlins, rails & fastening and heavy bracket framing (beam, tee, angle, channel, flat, etc) incl distance pieces, cleats , holdfast etc complete all as specified & directed.

Item No 14 :M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410-W (grade E-250) complete all as specified & directed.

Item No 15 : M&L Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm long, dia of bolt exc 12mm not exc 20mm complete all as specified & directed.

Item No 16 : M&L 2mm thick Fibre glass reinforced translucent sheeting in roof, walls etc fixed with L-T type or J-type or cranked hook bolts etc complete all as specified .

Item No 17 : S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Chhaja, etc fixed with self tapping screws complete all as specified & directed.

Item No 18 : S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge,etc with self tapping screws or J hooks complete all as specified & directed.

Item No 19 : Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified & directed.

Item No 20 : M&l for 25 mm th PCC (1:2:4) type B-1 (using 20 mm graded agg. as in floor and finished even and smooth w/o using extra cement complete all as specified.

Item No 21 : M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified & directed.

Item No 22 : -ditto as per item 21 above but on vertical surface such as skirting/ risers over & including10mm thick rendering in CM 1:4 etccomplete all as specified & directed.

Item No 23 : M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement.

Item No 24 : Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level complete all as specified and directed.

Item No 25 : M&L for Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors complete.

Item No 26 : M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base, filling of floor, Sunken etc complete all as specified & directed.

Item No 27 : M&L Cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in sub base of PVC tank/sunken slab/mass concrete incl formwork etc complete all as specified & directed.

Item No 28 : M&L Cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete all as specified & directed.

Item No 29 : M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3. complete all as specified & directed.

Item No 30 : M&L for machine cut kota stone slab as in steps 22-25mm thick over and incl 20 mm thick cement screed base in CM 1:6 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including ,moulding ,rubbing and polishing as in stiarcase complete all as specified and directed. (Rates are inclusive for screed base)

Item No 31 : All as item no 30 here in before but for skirting over 10mm thick rendering in CM (1:4) etc complete all as specified & directed.

Item No 32 : 75mm thick, PCC 1:4:8, type D-2 using 40mm graded stone aggregate, as in sub base of floor complete all as specified and directed .

Item No 33 : Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. Exc 1.5 Sqm each complete all as specified & directed.

Item No 34 : All as per above item No 33 but exc 1.5 Sqm but n.exc. 4 Sqm.complete all as specified & directed.

Item No 35 : Taking down shutters of any description exc 1 Sqm & not exc 2 Sqm each complete all as specified & directed.

Item No 36 : S&F pressed steel frames 125x60mm for doors or for windows with one or more rebated incl, necessary fixing lugs hinges lock strike plate etc complete all as specified and directed

Item No 37 : S&F Pressed steel frames of size 105X60 mm for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate,etc completeas specified and directed.

Item No 38 : M&L 35 mm thick factory made 2nd class hardwood Plain framed, paneled shutter with lock rail and panel of 12mm plywood commercial on both faces. The size of rail and style as per IS: 1003(Part - 1), complete all as specified & directed.

Item No 39 : S&F 35mm thick 2nd class hard wood glazed & skelton shutters, open repeated & prepared to received glass gauze etc. with sash bars, edges of framing plain for securing glass etc. (without sash bars)edges of framing plain , fitted to chawkhats complete all as specified & directed..

Item No 40 : S&F Aluminium anodised door stopper with rubber shoes of size min 150mm long complete all as specified & directed.

Item No 41 : S&F factory made steel windows with side hung shutter including projectin type hinges with steel handle, and steel peg stay complete with glazing bars,dovetailed or welded complete all as specified & directed.

Item No 42 : S&F factory made steel windows with side hung shutter including projectin type hinges with steel handle, and steel peg stay complete without glazing bar with & incl fixing flat iron for securing wire mesh complete all as specified & directed.

Item No 43 : S&F steel window, ventilators, fixed type, with glazing bars complete all as specified & directed.

Item No 44 : S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing.

Item No 45 : S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame complete all as specified & directed.

Item No 46 : S&F framed work as in doors or gates of angle or other section with guesset plates complete doors etc to be prepared to hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete all as specified & directed.

Item No 47 : S&F 1.00 mm thick Mild steel, plain, black sheet in covering to door shutters; covering to door chowkats (frames) cut to size edges beaded if directed, holes punched;incl round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. complete all as specified & directed.

Item No 48 : S&F steel ventilator with top hung shutters incl hinges, steel peg stay with glazing bar complete all as specified & directed.

Item No 49 : All as per item No 48 but without glazing bars complete all as specified & directed.

Item No 50 : S&F framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed, baluster walk ways, railings, framework of water tanks & similar wk conforming to Fe410-0 or Fe310-0 complete all as specified & directed.

Item No 51 : M & L cement concrete type B - 1 (1:2:4) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete all as specified & directed.

Item No 52 : S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed.

Item No 53 : S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified & directed.

Item No 54 : S & F Aluminium anodised handles of extruded section and fixed 125 mm long complete all as specified & directed.

Item No 55 : S & F 250 mm long mild steel sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified & directed.

Item No 56 : S&F in mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and direcetd

Item No 57 : S&F stainless steel wirecloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple complete all as specified & directed.

Item No 58 : S&F in repair stainless steel wirecloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple all as specified.

Item No 59 : S & F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as spd and directed.

Item No 60 : S&F Anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, window and ventilator shutters , fixed / sliding track two or three track including frames ,glazing clips , cleats side hung type without sash bars, fixed window, ventilators etc with one or more rebates including joining cleat for fixing etc. complete shall as specified.

Item No 61 : S&F Anodised aluminium sliding door shutter powder coated (minimum thickness of powder coating 50 micron) , aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, anodised aluminium snap beading, screws , top rail , guid rail etc. complete all as specified

Item No 62 : S & F Anodised aluminium window and ventilator shutters powder coated (minimum thickness of powder coating 50 micron) sliding , side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such locking arrangement complete all as specified

Item No 63 : S&F for 5.5 mm thick plain tinted glass area exc 0.50 sqm each pane fixed in door/window/partitions/ ventilators complete all as specified and directed.

Item No 64 : S&F for 4 mm thick plain tinted glass area n.exc 0.50 sqm each pane fixed in door/window/partitions/ ventilators complete all as specified and directed.

Item No 65 : S&F for 12 mm thick pre-laminated particle board, exterior grade, pre-laminated both sides with decorative choice lamination fixed in aluminum shutter/partition complete all as specified and directed.

Item No 66 : S&F alluminum wire cloth X-PM type, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with alluminum wire staples complete all as specified and directed

Item No 67 : Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete.

Item No 68 : S & F in repair 20 mm dia Harrison rails, mild steel, chromium plated with fixing in bracket etc complete all complete all as specified & directed.

Item No 69 : S & F brass CP bracket fancy type suitable for fixing to 20mm dia curtain rod complete all as specified & directed.

Item No 70 : Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete all as specified & directed.

Item No 71 : Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete.

Item No 72 : M&L brick work with sub class 'B' brick straight or curved on plan exc 6 metres radius with old size bricks built in cement mortar (1:6) complete all as specified & directed.

Item No 73 : All as per item 72 here in before but except bricks, using old serviceable brick as retrieved.

Item No 74 : M&L Brick work with sub class 'B' bricks straight or curved on plan to any radiusin half brick thick wall built in cement mortar 1:4, complete all as specified and directed

Item No 75 : M&L Rendering 15 mm thick in CM(1:4) in two layer , mixed with water proofing compound, on brick or concrete surfaces, trowelled to fair finish without using extra cement with WPC paid and measered sepretly complete all as specified.

Item No 76 : M&L Rendering 10 mm thick in cement mortar 1:6 finishing even and smooth without using extra cement.

Item No 77 : M&L Rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified.

Item No 78 : M&L three coat of white wash on newly prepared surfaces on wall , etc complete all as specified & directed.

Item No 79 : M & L for applying three coats of white wash on newly plastered surfaces of ceilings after necessary preparation of the surface, complete all as specified and directed.

Item No 80 : Demolition of cement concrete reinforced as in chullah hoods , shelves, cover slab and plate form etc complete all as specified and directed

Item No 81 : M&L for RCC as in kitchen platform, shelves, cover slab type B1 1:2:4 (20 mm graded aggregate) including necessary form work complete all as specified

Item No 82 : Providing, precast cement concrete (1:2:4) type B1 , including chamfers weatherings, throating etc. and setting in mortar CM 1:4 complete with joints to match, complete all as specifed.

Item No 83 : S&F mild steel TMT bars 8 to 10mm dia and over cut to length, bend to shape required including cranking, bending spirally or hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc all as specified and directed.

Item No 84 : M& L Rendering 15 mm thick in CM(1:4) on wall mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth without using extra cement complete all as specified and directed. Note – WPC shall be measured and paid separtely.

Item No 85 : M&L for 25 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate with WPC as in sunken portion and making adequate slope toward spout pipe complete all as specified and directed. NOTE: - Water Proofing Compound shall be measured and paid separately

Item No 86 : M&L for applying two coats evenly tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat (one coat over plaster and one coat on polythene film) including cleaning of surface over polythene film complete all as specified and as directed.

Item No 87 : M&L for polythene film black 50 micron thick laid in floor, vertical surface etc complete all as specified and directed

Item No 88 : S&F in repair 1000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete all as specified and directed

Item No 89 : S&F in repair PVC ball valve 20mm dia with epoxy coated aluminium rod and high density ball (minimum weight 210 gms) complete all as specified and directed .

Item No 90 : Disconnecting existing tanks of capacity exc 500 & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

Item No 91 : Taking up or down steel tubing & connections including cleaning for refixing complete all as specified and directed of following bore of pipes:-

(a) 15mm bore

(b) 20mm bore

(c) 25mm bore

Item No 92 : S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors etc complete all as specified and directed of following bore:-

(a) 15mm bore

(b) 20mm bore

(c) 25mm bore

Item No 93 : Refixing old galvanised steel tubes & connections on wall complete all as specified and directed of the following bore:-

(a) 15mm bore

(b) 20mm bore

(c) 25mm bore

Item No 94 : S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

Item No 95 : S&F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

Item No 96 : S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed .

Item No 97 : S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed fboth ends for or iron pipe or for unions and fixed complete all as specified and directed

Item No 98 : S&F in repairs15mm dia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed

Item No 99 : S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed.

Item No 100 : S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as directed and spd.

Item No 102 : S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with CI 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete all as specified and directed.

Item No 103 : S&F in repair vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including seat and cover for pedestal pan fixed in repair complete all as specified and directed.

Item No 104 : S&F in repair Vitreous China urinals, bowl type (back or corner wall type) of size 465x355x265mm, complete including providing and fixing plugs,waste coupling, waste pipe, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe.

Item No 105 : S&F in repair PVC connection 450mm long with two PTMT nuts (Prayag)

Item No 106 : S&F in repair CP towel rail, 20mm dia, D type,60cm long complete all as approved and directed.

Item No 107 : S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete.

Item No 108 : M&L Granite slab 20mm thick machine cut over & including 15mm thick screed bed in CM 1:4, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types etc

Item No 109 : S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling

Item No 110 : S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats.

Item No 111 : Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete.

Item No 112 : M&L two coat of white wash on old prepared surfaces on wall ,etc complete.

Item No 113 : M & L preparation of old steel surfaces any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete.

Item No 114 : M&L for preparing the newly surface of any description not otherwise described over 10 cm width or girth on steel surface and applying two coats of synthetic enamel paint over one coat of zinc chromate primer all as specified and directed

Item No 115 : M&L painting on new wooden based surfaces of any description not other wise described over 10cm width or girth applying two coat synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as spd and directed.

Item No 116 : M&L for preparation of old wood or wood based material not otherwise described over 10 cm girth and applying one coat of synthetic enamel paint etc complete all as specified and directed by EIC

Item No 117 : Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings,heads,shoes, bends,swan-necks,etc including removing from site

Item No 118 : S&F 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

Item No 119 : S&F for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints laid in trenches or in floors complete all as specified & directed.

Item No 120 : S&Ffor PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints fixed to wall

Item No 121 : S&F for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring laid in trenches or in floors complete all as specified & directed.

Item No 122 : S&F PVC (SWR) bends 110 mm bore of any radius all as specified & directed.

Item No 123 : S&F PVC (SWR) 110 mm bore branch piece, double (double Y) equal or unequal

Item No 124 : S&F PVC (SWR) 75 mm bore branch piece, double (double Y) equal or unequal

Item No 125 : S&F PVC (SWR) bends 75 mm bore of any radius all as specified & directed.

Item No 126 :S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door all as specified & directed.

Item No 127 :S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door all as specified & directed.

Item No 128 :S&F 110 mm bore PVC (SWR) vent cowl.

Item No 129 :S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement.

Item No 130 :S&F 110mm dia PVC (SWR)WC connector with lip ring

Item No 131 :Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete .

Item No 132 :S&F in repair 75mm dia Cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete.

Item No 133 :S&F in repair 100mm dia Cast iron vent cowl complete.

Item No 134 :S&F in repair Grating doom type 100mm dia of PTMT (Min wt 25gms)

Item No 135 :M&L for preparation of new plastered wall surface applying two coats of oil bound distemper all as specified.

Item No 136 :M & L for preparation of old plastered wall surface applying one coat of oil bound distemper all as specified.

Item No 137 :M&L for preparing the new plastered surfaces of wall and applying Two coats of cement based paint all as specified .

Item No 138 :M&L for preparing the old surfaces by complete removel of existing treatment and applying two coat of cement based paint on walls all as specified .

Item No 139 :Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust,etc all as specified and directed by Engineer-in-charge.

Item No 140 :M&L for preparation of old decorated surface of walls by brooming down and wire brushing etc and applying one coat of white wash on wall complete all as specified and directed.

Item No 141 :M&L for Preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash to ceiling complete all as specified and directed

Item No 142 :Taiking down carefully existing bituminous felt including plastered lime or cement concrete of any thickness and cleaning of the surface of roof treanches including flushing and junction parapets kerb walls PCC fillets beanching etc with wirre brushes and removing of the rubbish to a distance not exc 500 mtrs and depositing where directed at a level not exc 1.5 mtrs above the starting point complete all as specified.

Item No 143 :M&L for cement screed 15 mm thick in cement mortar (1:4) on concrete surface finishing the surface even and fair using WPC @ 3% of weight of cement.

Item No 144 :M&L for Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed complete (i) M&L for 3 mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non woven fabric(wt not less than 150 gms/sqm) over and including bituminous primer conforming to IS 3384-1965 @ 0.3 kg per sqm complete all as specified and directed. (ii) M&L for applying two coats of bituminous aluminium paint @ 100 grams/Sqm per coat over polymericmembraneon non approachable roofs complete all as specified and directed.

Item No 145 :Supply only water proofing compound (liquid),ISI marked.

Item No 146 :S&F 50mm bore tubes light grade galvanised with all fittings laid in floor as in spout pipe, etc complete all as specified .

Item No 147 :Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams and similar work at any position/height and dubbing out with PCC 1:1½:3, 5 cm to20 cm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports and form work complete.

Item No 148 :Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil

Item No 149 :Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil.

Item No 150 :Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point

Item No 151 :Material & Labour for 100 mm thick concrete bed in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and tested for 150 mm dia pipe complete all as specified and directed.

Item No 152 :Material & Labour for 150mm bore (internal dia) reinforced concrete pipes, class NP3, laid and jointed in trenches complete with collars and tested complete all as specified.

Item No 153 :Material & Labour for PCC 1:2:4 type B-1(using 20 mm graded stone aggregate) as in surface channels/benching of manhole, drain, laid to shape and slope and surfaces finished even and smooth using extra cement, complete etc all as specified and directed.

Item No 154 :Cutting into existing manhole for connecting new drains 150 mm dia, making good to pipe & rendering, cutting out existing benching for forming branch channel (1/2 or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required.

Item No 155 :M & L for providing pre cast reinforced cement conc. 1:2:4 type B-1 & set in cm 1:4 as in cover slabs for drain, manholes etc. incl necessary form work.

Item No 156 :Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc . Removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per condition seperately ) and making good distrubed surfaces of walls, floors etc. complete all as specified and directed at site.

Item No 157 :Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site.

Item No 158 :Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed/existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Item No 159 :Taking down ceiling fan/exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Ramgarh complete all as specified and directed.

Item No 160 :Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M Ramgarh complete all as specified and directed.

Item No 161 :M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One light point controlled by one, two way switch 5 Amps

(c) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

(f) One bell point controlled by one, bell switch 5 Amps

Item No 162 :Description all as per item No.161 here-in-before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 Sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

Item No 163 :Description all as per item No. 161 here-in-before but using 4.0 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 4.0 Sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common earth dolly.

Item No 164 :S&F for Switch piano type single pole 5 amp, 230 Volts complete all as specified and directed.

Item No 165 :S&F Switch Piano type 2 way switch 5 amp, 230 Volts complete all as specified and directed .

Item No 166 :S&F Switch Piano type single pole 15/16 amp, 230 Volts complete all as specified and directed.

Item No 167 :S&F switch bell push piano type 5 amp, 230 Volts complete all as specified and directed.

Item No 168 : S&F socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed.

Item No 169 : S&F socket outlet 2 in 1 , 5 pin, 5/15 amp, 230 Volts complete all as specified and directed.

Item No 170 : S&F Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified.

Item No 171 : S&F five stepped type electronic fan regulator flush type complete all as specified and directed at site.

Item No 172 : S&F lamp holder , PVC/ Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and directed.

Item No 173 : S&F Bell electric Ding Dong type suitable for operation on 230 volt 50 Hz AC supply complete all specified and directed.

Item No 174 : S&F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 amps including removal of old unservicable one complete all as specified and as directed.

Item No 175 : M&L for Sub main wiring with approved color coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory color and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sq mm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sq mm cable, one run of 6 sq mm cable and one run of PVC Conduit will be measured as one unit.

Item No 176 : Supply and fix for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surfcae to match with existing color of wall complete all as specified and as directed.

Item No 177 : Supply and fix for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match with existing color of wall complete all as specified and as directed.

Item No 178 : Supply and fix for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match with existing color of wall complete all as specified and as directed.

Item No 179 : S&F for MCB tripple pole and neutral rated capacity 63 Amps ,415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No 180 : S&F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No 181 : S&F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No 182 : S&F for ceiling fan, 230 Volts, 50 Hz, 1200 mm sweep with down rod, canopy, blades, BLDC motor etc and service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan terminal including writing the MES number with synthetic enamel paint complete all as specified and as directed.

Item No 183 : Labor only for refixing the ceiling fan/ Exhaust fan obtained from taking down with replacement of unsv 3 core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including fillin cavities with filler after cleaning all dust etc and writing the MES Number with synthetic enamel paint complete all as specified and as directed.

Item No 184 : Labor only for refixing the electrical geyser obtained from taking down with necessary fixing arrangements and replacement of unsv 3 core PVC insulated PVC sheathed 3 core multistranded copper conductor cable including painting of geyser complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc and writing the MES number with synthetic enamel paint complete all as specified and as directed.

Item No 185 : S&F for highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp, in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed.

Item No 186 : S&F for Decorative wall mounted luminarie made out of polycarbonate with unbreakable globe suitable for LED Bulb and provision of LED Bulb 10 watts complete all as specified and as directed.

Item No 187 : S&F for LED tube light fitting 2 feet x 10 watts mirror type with high output diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and as directed.

Item No 188 : S & F for energy saving new generation 10 watts LED bulkhead fitting IP 65 luminarie with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

Item No 189 : S & F for wall mounted LED tubelight fitting 20 Watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen output box type fitting, 230 volts and integrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and neessary mounting arrangemnts, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

Item No 190 : S & F for energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminarie with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer-in-charge.

Item No 191 : S&F for energy efficient exhaust fan of 230/300 mm sweep made of metal body Ventil Air- DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base complete all as specified and directed.

Item No 192 : S&F for energy efficient exhaust fan of 400/450 mm sweep made of metal body Ventil Air- DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base complete all as specified and directed. (Note for 191 & 192 :- Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

Item No 193 : Taking down existing old Ext unsv LT UG/ service cable of any description and size complete all as specified and directed at site.

Item No 194 : Supply and laying & testing and commissioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi stranded aluminium conductor laid in pipes, trenches/ ducts, on poles etc of size complete all as specified and directed for the following size :

(a) 3.5 core x 35 Sqmm

(b) 4 core x 25 Sqmm

(c) 4 core x 16 Sqmm

(d) 2 core x 10 Sqmm

Item No 195 to 197 : Blank

Item No 198 : Material & labour for supplying and laying un-reinforced pre cast concrete cable cover class LV, Type - 1, flate, size 250 mm x 150 mm x 40 mm complete all as specified and as directed.

Item No 199 : Material & labour for sand cushioning for protection of underground cable, consolidated and compacted with clean dry sand all as specified and as directed. (Note: The depth of sand shall be measured after punning only).

Item No 200 : M&L for boring of holes for 50/40 mm dia pipe under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine for laying of cables.

Item No 201 : Supply and laying GI pipe 50 mm dia light grade with all necessary fittings for cable protection complete all as specified and as directed.

Item No 202 : Supply and laying GI pipe 40 mm dia light grade with all necessary fittings for cable protection complete all as specified and as directed.

Item No 203 : M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

SCHEDULE "A" (Schedule of credit) Schedule of Credite Rs 8,25,193.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net bid amount)

SHARDA CONSTRUCTIONS

M/s united construction co.

Nand Lal and Sons

NIRMAL SALES CORPORATION