CA NO GE(N)AMB-01(P)/2020-21 REPAIR TO JOINERY, PLUMBING, SANITARY, ROOF PLASTERING AND OTHER CONNECTED BLDG REPAIR WORKS IN AREA -V AND OTHER AREAS IN OTM ACCN OF AGE B/R-I (N), AMBALA CANTT

Amount

M&L for rough cast plastering including 15 mm thick rendering in cement plaster 1 :3 complete as specified in SSR Part-I clause 14.22 as given .Note : Rough cast finish : After applying under coat of cement mortar 1:3 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1 shall be applied complete including taking down cement plaster complete all as specified and as directed by the Engineer-in-Charge.

M&L 15 mm thick cement plaster on fair faces of bricks or concrete walls in CM 1:6 finished even and smooth with out using extra cement on brick work or concrete surfaces incl taking down existing plaster complete all as specified and as directed by the Engineer-in-Charge.

M&L for applying a layer of gravel mixed with binder of haritage/ luxture @ 1 ltr per 4 Kg of gravel over plastered surfaces including taking down existing plaster, treatment or prepare existing wall complete all as specified and as directed by the Engineer-in-Charge.

M&L, Brick work using sub class ‘B’ old size bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:6) incl dismantling existing brick work complete all as specified and as directed by the Engineer-in-Charge.

M&L for anti skid porcelin tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.18 but not exc 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 15mm cement screed bed in CM (1:4) including dismantling of tiles complete all as specified and as directed by the Engineer-in-Charge.

M&L for 450x350x7mm thick coloured glazed tiles as in dado over 10mm thick rendering in CM (1:4) set & jointed in neat cement slurry & pointed in white cement mixed with pigment to match the shade of tiles incl dismantling of existing tiles complete all as specified and as directed by the Engineer-in-Charge.

M&L for double charged vitrified coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.36 but not exc 1.00 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 15mm cement screed bed in CM (1:4) incl dismantling of existing tiles complete all as specified and as directed by the Engineer-in-Charge.

-ditto all as per item no 8 cut from tiles of area exc 0.36 sqm but not exc 1 sqm above but in vertical surface/skirting including 15mm cement screed bed in CM (1:4) incl dismantling of existing tiles complete all as specified and as directed by the Engineer-in-Charge.

M&L fo 25mm thick cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in bedding layer under floor surface finished even and fair complete all as specified and as directed by the Engineer-in-Charge.

M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of existing AC sheets of any description complete all as specified and as directed by the Engineer-in-Charge. Make: JSW/ TATA BLUESCOPE/Bhusan/A-I Industry.

M&L Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet as in 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing sheet of any description complete all as specified and as directed by the Engineer-in-Charge. Make: JSW/ TATA BLUESCOPE/Bhusan/A-I Industry.

Supply and fixing roof trusses (framed), trussed purlins, MS Plates,angle and fastenings and heavy bracket framing (web, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed in position, including taking down of existing truss of any description (wood/steel)conforming to Fe-410(Gde 250),complete all as specified and as directed by the Engineer-in-Charge.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by the Engineer-in-Charge.

PCC 1:3:6 type B1 using 20 mm stone aggregate as in Holdfasts , bed blocks complete all as specified and as directed by the Engineer-in-Charge.

S&F for II class HW 35 mm thick plain framed panelled shutter( two panel) with lock rail and panel of 9 mm BWP commercial ply of 12 mm veneered particle board with commercial veneering on boths face . The size of rail and style as per IS:1003 (part-1) kiln seasoned and chemically pressure treated including taking down of shutter with or with out chowkat including all iron mongrey complete all as specified and as directed by the Engineer-in-Charge.

S&F for 35 mm thick II class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc. (with out sash bars) ,edges or framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass including including taking down of shutter with or with out chowkat including all iron mongrey complete all as specified and as directed by the Engineer-in-Charge.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing incl taking down exisitng chowkhats of any size or description complete all as specified and as directed by the Engineer-in-Charge.

S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing including taking down shutter with iron mongery complete all as specified and as directed by the Engineer-in-Charge.

S&F for steel window box type double shutter ( glazed with wire gauge)with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bar dovetailed or welded, guard bars and including window guard bar complete and one shop coat of zink chrome primer and incl taking down existing windows complete all as specified and as directed by the Engineer-in-Charge.

S&F for aluminium section of any size as directed for frame / shutter for door, window, ventilator, grill, aluminium partition including fittings (butt hinges, tower bolt, door stoppers) and taking out existing door of any description complete all as specified and as directed by the Engineer-in-Charge. Note : 12mm thick prelimanited partical board and 4.8mm thick tinted glass and motice latch lock shall be measured and paid seprately incl taking down existing door/windows all as specified and directed.

M&L for 4.8 mm thick tinted glass fixed to aluminium frame including rubber bead complete all as specified and as directed by the Engineer-in-Charge.

M&L for 12 mm thick prelaminated partical board interior grade prelaminated both side with decorative choice lamination fixed with screw to timber frame work/aluminium frame work complete all as specified and as directed by the Engineer-in-Charge.

S & F 100mm long mortice latch with two levers (vertical type), mild steel body complete all as specified and as directed by the Engineer-in-Charge

S & F mild steel Hydraulic door closer fixed to chowkats suitable for wooden shutter of weight 60 to 80 kg complete all as specified and as directed by the Engineer-in-Charge. . Make - Sandhu/Everst/JOI

S & F MS wire cloth galvanized with 0.56mm nominal dia of wire & 1.18mm average width of aperture fixed with tinned tacks of wire staples complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair MS wire cloth galvanized with 0.56mm nominal dia of wire & 1.18mm average width of aperture fixed with tinned tacks of wire staples complete all as specified and as directed by the Engineer-in-Charge.

M & L including taking out broken glass for sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete incl taking down existing broken glass panes if any all as specified and as directed by the Engineer-in-Charge

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F 150 mm long aluminium handle cast type anodised complete all as specified and as directed by the Engineer-in-Charge.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as directed by the Engineer-in-Charge.

S&F 150mm MS ordinary rat rail rod pattern springs incl roller and roller plate fixed to wooden chowkhats or welded to angle iron chowkhat frame complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing MS butt hinges 50 mm long medium weight and fixed complete all as specified and as directed by the Engineer-in-Charge.

M & L for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete including ball valve 20mm dia including taking out of existing water tank all as specified and as directed by the Engineer-in-Charge

M & L for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete including ball valve 20mm dia including taking out of existing water tank all as specified and as directed by the Engineer-in-Charge

M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors incl taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge

M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors incl taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge

S & F for 15mm bore angular stop valves,brass chromium plated high pressure with crutch or butter fly handle all as specified chromium plated with long shank and cup screwed for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge.. Make -Prayag/Hindware/Parryware/Cera/Essco

S & F for 15mm bore stop valves, brass chromium plated concealed type long shank screwed for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge.Make -Prayag/Hindware/Parryware/Cera/Essco

S & F for 20mm bore stop valves, cast copper alloy fancy type chromium plate with long shank & cup complete all as specified and as directed by the Engineer-in-Charge. Make -Prayag/Hindware/Parryware/Cera/Essco

S&F for bib taps 15mm dia brass Chromium Plated long body with crutch or butterfly handle screwed down for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge. Make -Prayag/Hindware/Parryware/Cera/Essco

S & F 15mm Pillar taps, brass chromium plated lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge. Make -Prayag/Hindware/Parryware/Cera/Essco

S&F for chromium plated shower rose 125 mm size with or without swivel joints any size including to fixing to steel pipe or union complete all as specified and as directed by the Engineer-in-Charge. Make -Prayag/Hindware/Parryware/Cera/Essco

S & F in repairs PVC connections 45 cm Long incl 15mm bore fly nuts on both ends complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs viterous china squatting pan Orrisa pattern size 580 x 440mm white with "P" and "S" trap front or back inlet etc including connectipon to trap and to flishing to pipe , anti syphonage pipe etc incl provisioning of lime concrete complete all as specified and as directed by the Engineer-in-Charge. Make -Prayag/Hindware/Parryware/Cera/Essco

S&F in repairs 10 ltr PVC valveless syphonic action type flushing cistern with brackets flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC complete all as specified and as directed by the Engineer-in-Charge. Make -Prayag/Hindware/Parryware/Cera/Essco

S&F in repair viterious china white wash hand basin pedestal pattern white in colour ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI breckets 2 Nos embedded in CM 1:4 type complete all as specified and as directed by the Engineer-in-Charge. Make -Prayag/Hindware/Parryware/Cera/Essco

Cutting chases in making good to facing where required and pointing in cement mortar 1:3 to end of edges or edges of landing, steps, cills, sunshades, shelves, lintels etc and cutting chases for consealed water tuning or consealed conduit wiring, etc and making good cutting exceeding 20cm girth in brick walls complete all as specified and directed by Engr-in-Charge

S & F in 25mm dia 1.6mm thick MS powdered coated decorateive type curtain rod incl pair of MS bracket, finals (Latto) at end incl fixing to wall with screws and making good complete all as specified and as directed by the Engineer-in-Charge.

M&L for PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge.

M&L for 18 mm thick MDF board prelaminated MDF board , exterier grade (grade-1) confirming IS 14587, fixed with screws for kitchen cupboard and cabinet ,self for cupboard including cut edges of prelaminated board to be sealed with 6mm teak lipping and all necessary fittings including dismantling of board of any description and type complete all as specified and as directed by the Engineer-in-Charge.

Prepation of new surfaces of wooden of any description not other wise decribed over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

Prepation of new surfaces of steel any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

M&L for prepration of newly plastered surface of wall and applying two coats of distemper oil emulsion over a coat of 2-3mm thick wall care putty complete all as specified and as directed by the Engineer-in-Charge.

Complete removing to existing treatment and preparation of old plaster surfaces of wall and applying two coat of Oil bound distemper including a layer of 2mm thick wall care putty complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed by the Engineer-in-Charge.

S&F in rep stainless steel sink made of stainless steel 1 mm thick kitchen with waste coupling waste pipe , washer and including all necessary item including fixing to brackets and connected union to pipe complete of over all size495mmx420mm with bowl size 410mmx330mmx160mm complete all as specified and as directed by the Engineer-in-Charge. Make: Prayag/ Neelkanth/ Jayna/NIRALI

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors incl taking down existing pipes complete all as specified and as directed by the Engineer-in-Charge.

S&F for 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed by the Engineer-in-Charge.

S & F PVC hollow sheet (wall panelling) inclusive of solvent cement and fixing at site with U clip or PVC frame as per specifications and drawing including taking out existing boarding already eaten by white ants having no scrap value complete all as specified and as directed by the Engineer-in-Charge

S&F Galvanished powder coated snap grid ceiling consisting of cross and tee section of size 24mm x 38mm x 0.30mm and wall grid angle 15mm x 15mm including 15 mm thick traigular cut mineral fibre board of size 600x 600mm. the snap grid frame shall fixed to ceiling with supporting consisting of 4mm dia GI wire including clip or with necessary nuts and bolts as per manufacture instructions complete all as specified complete all as specified and directed by Engineer-in-charge

dhingra builders

V K Constructive Builders

Puneet Sharma