Providing electrification in the existing building portion of Veterinary Hospital, Pettah under City Corporation Thiruvananthapuram.

Amount

90.2.1.1. Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).

Single Control light point with 6A, 3 plate ceiling rose -

90.2.1.3. Single control light point with out ceiling rose

90.2.1.4. Single controll seleing fan point with 6 A, 3 plate ceiling rose and with socket typped electronic regulator.

90.2.1.6. Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.

90.2.1.7. Independent Plug

90.3.20.3 Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required. 1200 mm 1X20W LED Lamp with box type fixture

of Supply and fixing angle/straight brass lined skirt type, bakelite batten holder without shade and giving connection etc as required with 10 W LED bulb.

90.4.1 Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

Supply, and providing every additional length of down rod of suitable size heavy gauge GI/WI pipe with 16/0.20 mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire conforming in relevant ISS or with original wiring extended including painting as required.

90.4.5.2 Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.

1200 mm sweep (category B) 5 strar rated ceiling fan complete with 300 mm down rod, canopies, shackles and blades and resistance type regulator working on 230/240V single phase A/C

MR 1193 400 mm sweep wall mounting fan

1.27.5. Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 8 Module (125 x 125 mm)

1.24.1. Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 Amp Switch

1.24.4. Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 Amp Switch.

1.27.3. Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 4 Module (125 x 75 mm)

1.24.3. Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 Amp Switch

1.24.5. Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet

1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 20 sq mm

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

90.6.4.12 1.50 sqmm 2 run

90.6.4.13 1.50 sqmm 3 run

90.6.4. 22 2.50 sqmm 2 run

90.6.4.32 4.00 sqmm 2 run

90.6.4.34 4.00 sqmm 4 run

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel MCB distribution board 415 volts,on surface/recess, complete with tinned copper bus bar, common neutral link, earth bar, DIN bar, interconnections, powder painted including earthing etc. as required. (but without MCB/RCCB/Isolator) 4 way (4+18 ) double door

2.3.2. Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator 8 way, Double door

2.10.1. Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.13.2 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.13.1 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 40 amps

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

2.14.2. Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

5.2. Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

5.4Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply and providing the following size of cast iron gully trap with covering at the top of the inspection chamber of earth pit as required.

300 X 300 X 6 mm cast iron gully trap with covering

Supply and providing test joint for the earthing system using 2 Nos. of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required

2x25x3 mm GI Strip

Supply and providing earth lead from the test joint to the earth electrode using following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.

25 x 3 GI strip

Supply and laying bare earthing conductors of the following sizes laid 0.6 m below ground level including excating trench of suitable size and refilling etc. as required.(In ordinary soil)

3.15 mm copper conductor (10 SWG)

Supply and drawing bare copper conductors of the following sizes along with wiring cables and giving connections etc as required.2.00 mm copper conductor (14 SWG)

Supply and drawing bare copper conductors of the following sizes along with wiring cables and giving connections etc as required. 3.15 mm copper conductor (10 SWG)

Supply and providing the following sized of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required.

25 x 6 mm brass bolt and nut

25 x 3 mm brass bolt and nut

Supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc as required.

2.00 mm (14 SWG)

3.15 mm (10 SWG)

90.3.18.2 Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required. 32 mm dia with HG company fabricated clamps

(MR1183) 36/40 W 4000 lumen LED, IP66 street light fittings with Aluminium housing stove enameled CRCA sheet, Steel reflector cover, acrylic cover complete with THD <10%, power factor>0.98, RoHS complaint duly wired up for use on 230 V ac supply

Fabrication, supply & installation of dust and vermin proof, wall mounting, thermoplastic meter box of following size suitable for fixing KSEB meter, fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.

S & F switch disconnector unit (isolator) complete with handle assmebly, door inter lock and padlocking arrangement of the following ratings 63A

Supply and fixing the following accessories in the existing meter board and giving connections etc.

63A, 415 V, DIN type fuse base.

63A 415 V Bakelite fuse fitting

63 A, 415V, 2 way neutral link mounted on DMC/SMC base.

Fabrication, supply & installation of dust and vermin proof, wall mounting, thermoplastic meter box of following size suitable for fixing KSEB meter, fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit. 450 x 300 x 214 mm

S & F switch disconnector unit (isolator) complete with handle assmebly, door inter lock and padlocking arrangement of the following ratings.

32A SP SDF

Supply and fixing the following accessories in the existing meter board and giving connections etc.

32A, 415 V, DIN type fuse base.

32 A 415 V Bakelite fuse fitting

32 A, 415V, 2 way neutral link mounted on DMC/SMC base.

Amount to be remitted in KSEB for shifting meter board and additional cash deposit if any required (The actual amount remitted will be reimbursed based on actuals)