Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical L2 |
| Sl No | Description | Qty | Unit | JOHN ANIYANKUNJU | JAIMES MATHEW |
|---|---|---|---|---|---|
| 1.00Description | |||||
| 1.01 | Stone Aggregate(single size): 40 mm nominal size | 4.44 | cum | 11,035.51 ₹11,035.51 Lowest | 11,035.51 ₹11,035.51 Lowest |
| 1.02 | Stone Aggregate(single size):20 mm nominal size | 11.17 | cum | 27,400.23 ₹27,400.23 Lowest | 29,547.3 ₹29,547.3 |
| 1.03 | Coarse sand (zone III) | 16.5 | cum | 46,591.82 ₹46,591.82 Lowest | 49,470.3 ₹49,470.3 |
| 1.04 | Portland Cement | 12.31 | tonne | 1,43,420.66 ₹1,43,420.66 Lowest | 1,43,420.66 ₹1,43,420.66 Lowest |
| 1.05 | Stone for masonry work | 22.05 | cum | 43,520.38 ₹43,520.38 Lowest | 43,520.38 ₹43,520.38 Lowest |
| 1.06 | Through and bond stone size 24 x 24 x 39cm | 45.58 | 50 nos | 7,226.23 ₹7,226.23 Lowest | 7,226.23 ₹7,226.23 Lowest |
| 1.07 | Stone Aggregate(single size): 10 mm nominal size | 4.67 | cum | 11,754.82 ₹11,754.82 Lowest | 11,754.82 ₹11,754.82 Lowest |
| 1.08 | wall form panel 1250x500 mm | 0.75 | each | 1,174.43 ₹1,174.43 Lowest | 1,174.43 ₹1,174.43 Lowest |
| 1.09 | Corner angle 45x45x5 mm 1.50 m long | 0.19 | each | 77.85 ₹77.85 Lowest | 77.85 ₹77.85 Lowest |
Tender Value
₹7.1 L
EMD Value
₹17,640
Closing Date
14 Feb 2025, 4:00 pmClosed
SECRETARY
Secretary Kunnathoor Gramapanchayat Kunnathoor East PO
Construction of Anganwadi AWC NO-21 ward-17
2025_DP_734494_1
A3/460/25(1)
Open Tender
Raw Materials
Supply
Boothakuzhy
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,670
₹17,640
18 Sept 2025
4 Feb 2025
15 Feb 2025
4 Feb 2025
14 Feb 2025
4 Feb 2025
4 Feb 2025 - 14 Feb 2025
Description
Stone Aggregate(single size): 40 mm nominal size
Stone Aggregate(single size):20 mm nominal size
Coarse sand (zone III)
Portland Cement
Stone for masonry work
Through and bond stone size 24 x 24 x 39cm
Stone Aggregate(single size): 10 mm nominal size
wall form panel 1250x500 mm
Corner angle 45x45x5 mm 1.50 m long
100 mm channel shoulder 2.5 m long
Double clip (bridge clip)
Single clip
M.S. Tube 40 mm dia
Solid blocks of size 30x20x20cm
Solid blocks of size 30x20x15cm
Structural steel such as tees, angles, channels and R.S. joists
Red oxide Zinc chromate primer
Adjustable span ESO+SI (2.35-3.40)
Adjustable telescopic prop 3 m (2.02-3.75m)
Beam clamp 300-380 mm (450-1070 mm)
Twisted steel/deformed bars
Solid blocks of size 40x20x10cm
Mild Steel round bar above 12 mm dia
Flats up to 10 mm in thickness
Anjili wood scantls
Anodised Aluminium tower bolt (barrel type) 200x10 mm
Chromium plated Brass screws 30 mm
Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm
Bright finished or black enameled mild steel screws 20 mm
Anjili wood planks
Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)
200 mm Aluminium aldrop
Iron hooks & eyes 100 mm
Anodised Aluminium handles 125 mm with plate 175 x 32 mm
Chromium plated Brass screws 25 mm
Fine sand (zone IV)
Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre
Pink primer (for wood)
Plastic emulsion paint
Synthetic enamel paint in black or chocolate shade
Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black
Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.
24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish
Vitreous China orrisa type w.c. pan size 580 mm
Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)
100 mm S.C.I. trap with vent heel
Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm
C.I. bracket for wash basin and sinks
PVC pipe 50 mm outer dia.6kgf/cm2
PVC pipe 110 mm outer dia. 4kgf/cm2
PVC pipe 25 mm outer dia. 10kgf cm2
PVC pipe 20 mm outer dia 10 kfg/cm2
PVC pipe 63 mm outer dia . 6kgf/cm2
PVC vent cowl 75 mm dia
PVC door Tee 110x110x75 mm dia
Brass 100 mm mortice latch and lock with 6 levers without pair of handles
Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock
Polyethylene water storage tank with cover and suitable locking arrangemnet
Vitreous china flat back wash basin 550x400 mm
15 mm C.P.brass tap
C.P. brass waste 32 mm
Black Japan
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .