Vivekadhin Year 2026-2027

Name of Work :- Supplying and Erecting LED Street Light Jabalpur Road (Dadavadi) For Tankara Nagarpalika.

Sr. No. Quantity Description of Item. Nett Rate Amount.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company

1 mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with

36 Ea over-voltage protection 3345.12

(i) 48 watts Cat-lll

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper

2 290 Mtr wires of following size to be erected as directed. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having breaking

3 36 Ea capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark CAT lll 270.68

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having following capacity (a) 6 to 32 Amp. 578.73

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V +

5 1 Ea 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also 3168.37

comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with necessary connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per direction Cat

6 1 Ea III (D) 4 pole 440V 40 Amp. 2782.55

Supply of approved make FRP Pole having following specifications: FRP Light Pole made by CNC

filament winding machine using thermoset resin polyester/epoxy resin system) having minimum 62%

glass content. The pole should be in one piece and tapered round in shape, having smooth finish and

should be totally free from corrosion as well as non conductive & shock proof Pole should be provided

with FRP Anchor Base and it should be heavy duty, or MS Material duly painted with Epoxy paint. Pole

should be flame retardant as per IS 6746. Resin used shall be UV resistance and pigmented. A highly

weather resistant polyurethane coating shall be applied to the pole after applying suitable primer

system that ensures proper adhesion of the paint. Minimum coating thickness shall be 80 to

micron. Deflection of the pole shall not exceed more than 10% of the length of pole for the given load“

Pole should be generally made as per the dimensional data, performance criteria and some

interchangeability features of poles as per standard ANSI C 136.20 latest version or ASTM D 4923/01

including cable termination box with necessary accessories . The size of pole and type of installation

with foundation as per manufacturer details and site requirement are as below . (1) Suitable for base

plate mounting single arm Bracket. [H] Overall length of 6 Mtr. Average Thickness: 7.5mm

Top/ Bottom OD Dia A/F 89mm ± 2mm approx. approx. Weight of Pole 32 kg approx. (Without Base)

Anchor Base (Size 300X300 & 18mm Th.) (Colour- As per Buyer)

Providing Single arm bracket of FRP having 2 sets of suitable SS304 hardware for fixing the brackets &

8 36 Ea spread of 2 Mtr(Suitable for 89 to 114 mm pole top dia) (A) Single arm bracket (Colour- As per Buyer) 4447.03

Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S. Sheet with

angle iron legs made from jointless M.S. Angle with cable clamps to be buried in ground to have

appropriate erection to work uniform until erected with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged double door internally supported on both side, with

internal and outside looking arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of

9 1 Ea Two Nos. one is welded and other with nut and bolt for erecting Bakelite sheet. Painting the Section 16691.26

Pillar inside and out side with three tank powder coated paint. section pillar roof should be without joint

with water leakage proof & tested as per IP 55 test & followed by IS 2147 of 1962 (A) 150 X 90 X 75 cm

section pillar fabricated from 14 Gauge MS Sheet with angle iron legs 95 cm long made from 40 X 40 X

6 mm thick MS angle.

Supplying and erecting HYLAM sheet on existing angle iron frame.for following thickness (A) 2mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium

11 1455 Mtr conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following 124.23

size of cables (B) 4 core 6 Sq. mm

12 1 Kg Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 77.77

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly stamped and signed by agency and

13 1 Ea officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having 5842.85

back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for long time Necessary test

report must be submitted by Agency. [A] For electrical installation up to 440 V

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

14 armoured cable complete with out going tails, insulating tape etc for following size of cables.

4 Ea (B) 2 to 4 core 6 Sq. mm 38.38

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

15 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner.

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming

to IS 14930 II )with necessary connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing cable

980 Mtr (A)50 mm outer dia 62.62

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any

17 800 Mtr size of cable or locating the fault all over the run and back filling the same and making the surface as 74.74

180 Mtr (B) If additional machinery like hammer driller or JCB use [Add] 357.54

Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced concrete work in (A) Foundations

(180(Length) Mtr *0.3 (Width) Mtr *0.1 (Depth) Mtr)=5.4 Cmt.

Note :- GST Extra As per Government Rule.