ELECTRIFICATION INCLUDING SUB STATION AIRCONDITIONING FOR MUSEUM HALL ELECTRONIC EQUIPMENTS FOR MUSEUM RESEARCH AND SKILL DEVELOPMENT CENTRE AND OTHER ERC ELECTRONIC EQIPMENTS WATER TREATMENT PLANT AND WATER PUMPS ELECTRIFICATION FOR GARDEN LIGHTING

Amount

WIRING POINTS/GROUP CONTROL POINTS-SHORT,MEDIUM,LONG

od98788/2020_2021 : Supply and wiring points according to IS 732-1989 using medium class rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.5 sq mm FRLS PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FRLS PVC insulated wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.<br>Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.Short point

od98795/2020_2021 : Supply and wiring points according to IS 732-1989 using medium class rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.5 sq mm FRLS PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FRLS PVC insulated wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required (RoHS compliant modular accessories)..<br>Single control light point without ceiling rose - Long point

od98807/2020_2021 : Supply and wiring points according to IS 732-1989 using medium class rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.5 sq mm FRLS PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FRLS PVC insulated wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required (RoHS compliant modular accessories)..<br>Single Control light point with 6A, plate ceiling rose - Long Point

od98812/2020_2021 : Supply and wiring points according to IS 732-1989 using medium class rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.5 sq mm FRLS PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FRLS PVC insulated wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required (RoHS compliant modular accessories).<br>Single control light point without ceiling rose - Medium point

od98820/2020_2021 : Supply and wiring points according to IS 732-1989 using medium class rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.5 sq mm FRLS PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FRLS PVC insulated wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required (RoHS compliant modular accessories)..<br>Single Control light point with 6A, plate ceiling rose - Medium Point

od98824/2020_2021 : Supply and wiring points according to IS 732-1989 using medium class rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.5 sq mm FRLS PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FRLS PVC insulated wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required (RoHS compliant modular accessories).<br>Call bell point with 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end - Short point

od98828/2020_2021 : Supply and wiring points according to IS 732-1989 using medium class rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.5 sq mm FRLS PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FRLS PVC insulated wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required (RoHS compliant modular accessories)..<br>Single control light point without ceiling rose - Short point

od98829/2020_2021 : Supply and wiring points according to IS 732-1989 using medium class rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.5 sq mm FRLS PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FRLS PVC insulated wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required (RoHS compliant modular accessories)..<br>Twin Control light point with 6A, plate ceiling rose - Short point

od98832/2020_2021 : Supply and wiring points according to IS 732-1989 using medium class rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.5 sq mm FRLS PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FRLS PVC insulated wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required (RoHS compliant modular accessories). Twin control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point

od98833/2020_2021 : Supply and wiring points according to IS 732-1989 using medium class rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.5 sq mm FRLS PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FRLS PVC insulated wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required (RoHS compliant modular accessories)..<br>Single Control light point with 6A, plate ceiling rose - Short point

od98836/2020_2021 : Supply and wiring points according to IS 732-1989 using medium class rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.5 sq mm FRLS PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FRLS PVC insulated wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required (RoHS compliant modular accessories).<br>Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point

od98842/2020_2021 : Supply and wiring points according to IS 732-1989 using medium class rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.5 sq mm FRLS PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FRLS PVC insulated wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.<br>Independent plug -Short point

1.55.1 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A

1.55.2 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B

1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

LED TUBE ,LED SURFACE PANEL,LED CLEAN ROOM LIGHTS,LED FALSE CEILING LIGHTS

90.3.19.3 : Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required1200 mm 1X20W LED Lamp with box type fixture

od98689/2020_2021 : Supply, conveyance, installation, testing and commissioning of Recess mounted circular /squre LED downlighter with housing made up of white powder coated, pressure die cast aluminium for better heat management. Hight Transmittivity Polycarbonate diffuser for uniform light distribution, white rim moulded in engineering plastic, driver pre wired upto terminal block, CRI>80, LED efficacy>170lm/W, LED Make:Nichia/Cree/Osram/etc , Color temperature-6500K, IP20, 50000 burning hours as per L70 Criteria, Ambient temp-0 to 50DegC, Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection in CM-2KV, Multistage Isolated Constant Current - Constant Voltage operated driver with range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard.Circular recess mounted/squrerecess mounted,Wattage ≤ 11-18W recess mounted similar to make Wipro,crompton,jaguar,Philipser,etc. with luminaire lumen ≥ 820lm and System Efficacy ≥ 75lm/W.and including charges for cutting holes & frame for Gypsum/POP ceiling and.giving connection with 3 core round flex wire etc complete.<br>

od98709/2020_2021 : Supply, conveyance installation testing and commissioning of pre-wired light 8W to 10Ws LED ordinary type light fittings ( strip type fittings )complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.

od98715/2020_2021 : Supply, conveyance, installation, testing and commissioning of LED Recessed Anti-Glare cob Lights- thrim less fitting with all accessories , aluminium diecast housing with powder caoted wire guard. CRI>70, Lumiled,color temperature-3000K, IP65 rated, 50000 burning hours as per L70 Criteria, Ambient temp-0 to 45DegC, Driver efficiency>75%, THD<15%, Powerfactor>0.95, Surge protection in CM-4 KV, Constant Voltage Operated driver with range 110-320V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. 12 W LED COB 38 light luminaire delivering > 60lm, similar to LUKER model:LAGBCOB, OR Equivalent

od98728/2020_2021 : Supply, conveyance, installation, testing and commissioning of High efficient Recess mounted IP54 rated, LED bottom opening cleanroom luminaire with CRCA powder coated Housing, Bottom frame, Satin finish high efficiency translucence (HET) diffuser is sealed with bottom frame and non-hygroscopic VHB gasket to ensure dust proofing, Surface finish in epoxy polyester powder coating lends higher corrosion resistance & life long finish. LED with 50000 burning hours as per L70 Criteria, CRI>70, LED Make: Nichia/Cree/Osram/ Lumiled, color temperature-5700K, , Electronic driver pre wired up to terminal block, Ambient temp-0 to 50DegC, Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection in CM-3.5KV, Multistage Isolated Constant Current-Constant Voltage Operated driver with range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard.Recess mounted BOCR luminaire, Wattage ≤ 60W, Cutout Dimension- 580 mm x 580 mm luminaire lumen ≥ 5400lm and System Efficacy ≥ 90lm/W. The light fitting need to be supported from ceiling with rod suspension accessories . similar to make Wipro ,crompton,or Equivalent and giving connection with 3 core round flex wire .etc .complete.<br><br>

od98741/2020_2021 : Supply, conveyance, installation, testing and commissioning of Recess mounted full panel LED luminaire with Multi Angular design on diffuser White powder coated housing & frame in CRCA sheet, High efficiency LED grade diffuser, electronic driver duly wired upto terminal block, CRI>80, LED Make:Nichia/Cree/Osram/etc, Colour temperature-5600-5900k IP20, 50000 burning hours as per L70 Criteria, Ambient temperature-0 to 50DegC, Driver Efficiency>90%, THD<15%, Powerfactor>0.9, Surge protection in CM-2KV, ModelMultistage isolated Constant current-Constant voltage operated driver with range 150-270V AC and Safety extra low voltage safe level<60V DC as per IEC Standard.2ft x 2ft, Wattage ≤ 31-40W recess mounted similar to make Wipro,crompton,jaguar,Philips,etc. with luminaire lumen ≥ 3000lm and system efficacy>90lm/W.and including charges for cutting holes & frame for Gypsum/POP ceiling and.giving connection with 3 core round flex wire etc complete. Model Crompton Vectot I -LCTLRF1-36-CDL or equivalent<br>

od98749/2020_2021 : Supply, conveyance, installation, testing and commissioning of Recessmounted full panel LED luminaire with rhombus design on diffuser White powder coated housing & frame in CRCA sheet, High efficiency LED grade diffuser, electronic driver duly wired upto terminal block, CRI>80, LED Make:Nichia/Cree/Osram/etc, Colour temperature-5600-5900k IP20, 50000 burning hours as per L70 Criteria, Ambient temperature-0 to 50DegC, Driver Efficiency>90%, THD<15%, Powerfactor>0.9, Surge protection in CM-2KV, ModelMultistage isolated Constant current-Constant voltage operated driver with range 150-270V AC and Safety extra low voltage safe level<60V DC as per IEC Standard.2ft x 2ft, Wattage ≤ 31-40W recess mounted similar to make Wipro,crompton,jaguar,Philips,etc. with luminaire lumen ≥ 3000lm and system efficacy>90lm/W.and including charges for cutting holes & frame for Gypsum/POP ceiling and.giving connection with 3 core round flex wire etc complete. Model Crompton Vectot VI -LCTLRF6-36-CDL or equivalent<br>

od98768/2020_2021 : Supply, conveyance, installation, testing and commissioning of Slim panel Surface mounted 300x300 mm down lighter with all accessories, housing made up of die cast aluminium for better heat management. Hight Transmittivity Diffuser for better light output and uniform light distribution without glare. Driver and accessories are pre wired for easy installation and long service. CRI>70, Color temperature>6000K, IP20, Ambient temp-0 to 45DegC, Driver efficiency>85%, THD<20%, Powerfactor>0.95, Surge protection 2KV, Multistage Isolated Constant Current operated driver with range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard.Square Slim surface mounted, Wattage ≤ 24W, similar to Wipro ,crompton,or Equivalent with luminaire lumen ≥ 2000 lm and giving connection with 3 core round flex wire .etc .complete.<br>

LED BULB,LED PENDENT LIGHT,LED BULK HEAD, LED POST TOP LAMP, LED BOLLARD, LED FOOT LAMP,LED FLOOD LIGHT,LED HIGH BAY LIGHT,LED STREET LIGHT,LED SPOT LIGHT,LED STRIP LIGHT

1.58 : Supplying and fixing PVC batten/ angle holder including connection etc. as required.

od98662/2020_2021 : Supply,providing,testing and commissioning of 7W to 9 W PWD Approved make LED Bulb<br>

od98729/2020_2021 : Supply, conveyance, installation, testing and commissioning of Integral SMD LED highbay ,with all accessories luminaire with specially designed Aeroflo® design facilitate free flow of air through the die casted aluminium housing keeping heat away With specially designed High Trans mitivity Lens to deliver an exceptional optical performance, Integral product with Isolated IP67 potted Driver With Over temperature protection and Short circuit and Reverse Polarity Protection, Constant Current Operated driver with input range 150-300V AC having Over Voltage & Low Voltage Protection and auto recovery , Complaint to Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Withstands 440 V for 8 Hrs, Driver efficiency>90%, THD<10%, Powerfactor >0.9, Surge protection 4.0KV, LED with CRI>70, Color temperature-5700K, IP65, 1,00,000 burning hours as per L70B50 Criteria, Ambient temp-0 to 40DegC, Suspension Mounting with factory fitted Eye Bolt Wattage ≤ 80W similar to WIPRO ,CROMPTON ,OR Equivalent (90 Deg beam angle with luminaire lumen ≥ 11200lm and System Efficacy ≥ 140lm/W.<br>

od98740/2020_2021 : Supply, conveyance, installation, testing and commissioning of High efficient Floodlight,with all accessories Integral cradle mount LED luminaire with Aluminium pressure Die cast housing parts for long life,Seconday Polycarbonate lens for superior performance, Toughened glass with silicon gaskets for IP66 protection, Complete assembly with LED,IP67 potted Driver With Over temperature protection and Short circuit and Reverse Polarity Protection , Multistage Isolated Constant Current- Constant Voltage Operated driver with range 120-300V AC having Auto Cutoff at Low and High Voltage and auto recovery, Complaint to Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Withstands 440 V for 8 Hrs, Driver efficiency>85%, Power factor>0.95, THD<10%, LED with CRI >70,Temperature range- 0 to 45DegC,with inbuilt SPD 10kv , Colour Temperature- 5700K, Surge protection in CM-4KV, 50000 burning hours as per L70 Criteria, LED Floodlight, Wattage ≤120W similar to WIPRO ,CROMPTON,JAQUAR OR Equivalent with luminaire lumen ≥ 12000lm and System Efficacy ≥ 100lm/W.

od98756/2020_2021 : Supply, conveyance, installation, testing and commissioning of LED Bulkhead fitting with all accessories, aluminium diecast housing with powder caoted wire guard. CRI>70, LED Make: Nichia/Cree/Osram/ Lumiled, LED Efficacy>120lm/W, color temperature-5700K, IP65 rated, 50000 burning hours as per L70 Criteria, Ambient temp-0 to 50DegC, Driver efficiency>85%, THD<20%, Powerfactor>0.95, Surge protection in CM-2KV, Multistage Isolated Constant Current-Constant Voltage Operated driver with range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. 10W LED Bulkhead luminaire delivering > 720lm, similar to WIPRO ,CROMPTON,JAQUAR OR Equivalent

od98767/2020_2021 : Supply, conveyance, installation, testing and commissioning of LED Recessed foot lamp ( step lamp) with all accessories fitting with aluminium diecast housing with powder caoted wire guard. CRI>70, Lumiled,color temperature-3000K, IP66 rated, 50000 burning hours as per L70 Criteria, Ambient temp-0 to 45DegC, Driver efficiency>75%, THD<15%, Powerfactor>0.95, Surge protection in CM-4 KV, Constant Voltage Operated driver with range 110-320V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. 3 W LED Step light luminaire delivering > 60lm, similar to WIPRO ,CROMPTON,JAQUAR OR Equivalent

od98794/2020_2021 : Supply, installation,testing and commissioning of pendent light of 5 W LED light fitting ,complete with all accessories including connection etc as required .not less than 100, lumen/watt<br>

od98800/2020_2021 : Supply, conveyance, installation, testing and commissioning of LED Bollard ,Dark grey, pure polyester powder coated aluminum extruded housing , seamless, asymmetric PC diffuser for better Light Transmission, Product is designed for IP 65 protection, Luminaire lumen>555 lm, System Efficacy>50 lm/W, Temperature range- 0 to 50DegC, LED With 50000 burning hours as per L70 Criteria,CRI >80,Colour Temperature- 5700K, IP 65 potted driver and accessories pre-wired up to terminal block. Driver efficiency>80 %, Power factor>0.95, THD<25%, Surge protection 2KV, , Multistage Isolated Constant Current Operated driver with range 180-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard.LED bollard, 8W -10W similar to Wipro ,crompton,or Equivalent and giving connection with 3 core round flex wire, including RCC pedestal of suitable size as per drawing of manufacturer for mounting<br>including excavation, providing CC Foundation 1:2:4 work, grouting of 'J' hook type bolt (4 Nos.), plastering, coping and finishing the surface, installation of octagonal street light poles on concrete pedestal including supply of 3C x 1.5 Sq.mm flexible<br>Copper cable for interconnection etc. complete and as required as directed by the EIC..etc .complete.<br><br>

od98806/2020_2021 : "Supply, conveyance, installation, testing and commissioning of High efficient LED Post Top luminaire with Aluminium housing in pure polyster UV resistant powder coated black finish housing , Top maintainable product with top opening die cast cover, Acylic clear glass reflector, IP65 protection, Suitable for pole dia. Up to 50 mm.Luminaire lumen>1900 lm, System Efficacy>95 lm/W, LED With 50000 burning hours as per L70 Criteria, Colour Temperature- 5700K, CRI >70, In-built electronic driver duly wired up to terminal block. Temperature range- 0 to 45 DegC, Driver efficiency>85%, Power factor>0.95, THD<10%, Surge protection in CM-4 KV, Multistage Isolated Constant Current- Operated driver with range150-300 V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard.LED post top luminaire, 20 W With 3 mtr Round GI Pu coated pole with outer dia 50mm suitable to mount 20W post top with base plate and accessories including RCC pedestal of suitable size as per drawing of manufacturer for mounting<br>octagonal street light pole including excavation, providing CC Foundation 1:2:4 work, grouting of 'J' hook type bolt (4 Nos.), plastering, coping and finishing the surface, installation of octagonal street light poles on concrete pedestal including supply of 3C x 1.5 Sq.mm flexible<br>Copper cable for interconnection etc. complete and as required asdirected by the EIC. make Wipro ,crompton,or Equivalent and giving connection with 3 core round flex wire .etc .complete.<br>"<br>

od98808/2020_2021 : Supply, conveyance, installation, testing and commissioning of 35W High efficient LED Streetlight Suitable for external pole dia. Up to 45 mm, with Aluminium pressure Die cast housing parts for long life, Pure polyester powder coated Dark Gray housing, High purity PMMA lenses for superior performance, Toughened glass with silicon gaskets for IP66 protection,LED with 50000 burning hours as per L70 Criteria,LED Make-Nichia/Cree/Osram, CRI >70,Colour Temperature- 5700K, in-built Isolated Constant Current Operated Electronic Potted driver pre- wired up to terminal block,Input Voltage Range 110V-320V, Surge protection 4KV ,Internal Low Voltage and High Voltage Cut off With Auto re-start facility, 440V operation for 8 hours Temperature range- 0 to 45DegC, Driver efficiency>85%, THD <=10% ; PF >=0.9, =and Safety Extra Low Voltage Safe level<60V DC as per IEC standard 5 Mtr Octagonal GI Pole suitable with base plate, .5 Mtr Arm and all accessories required, 35W post top with base plate and accessories including RCC pedestal of suitable size as per drawing of manufacturer for mounting<br>octagonal street light pole including excavation, providing CC Foundation 1:2:4 work, grouting of 'J' hook type bolt (4 Nos.), plastering, coping and finishing the surface, installation of octagonal street light poles on concrete pedestal including supply of 3C x 1.5 Sq.mm flexible<br>Copper cable for interconnection etc. complete and as required as directed by the EIC. make Wipro ,crompton,or Equivalent and giving connection with 3 core round flex wire .etc .complete. with luminaire lumen ≥ 4200lm and System Efficacy ≥ 120lm/W With <br>

od98816/2020_2021 : Supply, conveyance, installation, testing and commissioning of Recess mounted high efficient LED spotlight,2W, 114 lumens luminaire lumen output, 33 mm cutout dia and 12 mm deapth. Housing made up aluminium and white powder matt coated finish, 60 degree Lens optics for sharp cone without glare Color Temperature-2700K, IP20, Powerfactor>0.9, Surge protection -2KV, 380V AC ,make Wipro ,crompton,or Equivalent and giving connection with 3 core round flex wire .etc .complete. <br>

od98821/2020_2021 : Supply, conveyance, installation, testing and commissioning of Non-integral flexible LED strip light, 4.8W per meter, 3000 K, Available in 5m spools,Can be cut at marked intervals to suit desired lengths,LS06 series with IP 20 is suitable for indoor applications,View angle of 120 degree,Designed for installation by adhesive back peel for easy installation ,make Wipro ,crompton,or Equivalent and giving connection with 3 core round flex wire .etc .complete. (Each 1 No(5 Mtr) set)<br><br>

FIXING OF CEILING FAN,EXHAUST FAN, WALL FAN , CALL BELL, BUZZER

90.4.1 : Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

90.4.2 : Supply and installation of suitable size MS belt type fan clamp fabricated from flat iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required.

90.4.5.2 : Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -5star rated ceiling fan complete with 300mm down rod , canopies, shackeles and blades and resistance type regulator working on 230V/240V single phase A/C

1.47 : Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

1.48 : Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

90.4.8 : Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.

90.4.9 : Charges for cutting holes suitable for accommodating exhaust fans above 305mm sweep and up to 450mm sweep including plastering colour washing etc. as required.

od98755/2020_2021 : Supply, conveyance, installation, testing and commissioning of the 450 mm exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS, 450 mm, single phase, heavy duty, 1400 rpm exhaust fan in metal frame<br><br>

od98766/2020_2021 : Supply, conveyance, installation, testing and commissioning of the 305 mm exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS,305 mm, single phase, heavy duty, 1400 rpm exhaust fan in metal frame<br>

od98777/2020_2021 : Supply, conveyance, installation, testing and commissioning of the 225mm exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS,225mm metal frame.

od98798/2020_2021 : Supply Conveyance,installation,testing and commissioning of Wall mounting Fans of all types using mounting brackets supplied along with the fan 300MM Should be of standard make like orient, havells &almonard

od98805/2020_2021 : Supply Conveyance,installation,testing and commissioning of 1400 rpm HEAVY DUTY WALL FAN 600MM Should be of standard make like orient, havells &almonard

90.5.1.3 : Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Ding dong bell

90.5.1.4 : Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Musical bell with bird sound

od98819/2020_2021 : Supplying and fixing following modular buzzer on the existing modular plate & switch box including connections but excluding modular plate etc. as required.<br>Buzzer

SUB MAIN WIRING

1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire

1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.14.4 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 6 Sq.mm + 1 x 6 sq.mm earth wire

1.14.5 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 10 sq. mm + 1 X 6 sq. mm earth wire

1.14.6 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 16 sq. mm + 1 X 6 sq. mm earth wire

1.14.7 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

1.14.8 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 4 sq. mm + 2 X 4 sq. mm earth wire

1.14.9 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 6 sq. mm + 2 X 6 sq. mm earth wire

1.17.1 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm

1.17.2 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.4 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 1.5 sq. mm

1.17.5 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 X 1.5 Sq. mm

1.17.6 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 1.5 sq. mm

1.17.7 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.7 x 1.5 sq. mm

1.17.8 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.8 x 1.5 sq. mm

1.17.9 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.9 x 1.5 sq. mm

1.17.11 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm

1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.13 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 2.5 sq. mm

1.17.14 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 x 2.5 sq. mm

1.17.15 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 2.5 sq. mm

1.17.18 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.9 x 2.5 sq. mm

1.17.20 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm

1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

1.17.24 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 4 sq. mm

1.17.27 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.9 x 4 sq. mm

1.17.30 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 6 sq. mm

PVC C0NDUIT

90.1.1.1 : Supply and laying medium gauge PVC conduit of the following sizes conforming to IS 9537/1983 Part III in roof slab, jointing the pipes with PVC solvent cement, tying & fixing the conduit firmly with the re-inforcement etc. as required.20 mm

90.1.1.2 : Supply and laying medium gauge PVC conduit of the following sizes conforming to IS 9537/1983 Part III in roof slab, jointing the pipes with PVC solvent cement, tying & fixing the conduit firmly with the re-inforcement etc. as required.25 mm

90.1.1.3 : Supply and laying medium gauge PVC conduit of the following sizes conforming to IS 9537/1983 Part III in roof slab, jointing the pipes with PVC solvent cement, tying & fixing the conduit firmly with the re-inforcement etc. as required.32 mm

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

od98716/2020_2021 : Supplying and clamping the 20 mm dia sizes of corrugated PVC flexible conduit with necessary compression gland with locking ring and check nut at termination pointed using suitable size GI / painted MS saddles spacing not exceeding 60 cms on surface including making good the damages, colour washing etc. as required.<br>

MODULAR BOX,PLATE,SWITCH,SOCKETS ,LED DRIVER &ACCESSORIES

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

90.10.3.17 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )6A universal socket

90.10.3.22 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )6A 3 pin plug top

90.10.3.23 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )16A 3 pin plug top

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

90.10.3.15 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator

90.10.3.32 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3 pin plug top with indicator

90.10.3.33 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket

1.24.6 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet

1.24.7 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet

1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.27.3 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)

1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

1.27.5 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

1.27.6 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.12 Module (200mmX150mm)

od98814/2020_2021 : Supply, conveyance, installation, testing and commissioning of 2 A, 12 V, LED driver suitable for LED strip,make Wipro ,crompton,or Equivalent and giving connection with 3 core round flex wire .etc .complete. <br>

2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

2.3.2 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.14.2 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.18 : Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth,metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, onsurface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

90.11.1.11 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43)

2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

od98717/2020_2021 : Supply and fixing FP enclosure for independent mounting of MCB/ RCCB/ RCBO(2012 sor rate)

90.11.1.10 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43)

90.11.1.20 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

90.11.1.19 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

90.11.1.18 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

2.2.13 : Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 Amp, 30 KA 4 Pole

2.2.15 : Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.200 Amp, 36 KA

2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

PLATE EARTHING

5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.6 : Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.8 : Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earthelectrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

5.2 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. withcharcoal/ coke and salt as required

5.14 : Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

5.9 : Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earthelectrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

5.15 : Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

6.12 : Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

5.13 : Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

5.17 : Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing asrequired.

5.19 : Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

LIGHTENING PROTECTION SYSTEM

6.2 : Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube,having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc.complete as required.

6.3 : Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required.

6.4 : Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

6.7 : Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightningconductor complete as required.(For horizontal run)

6.8 : Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightningconductor complete as required.(For vertical run)

6.9 : Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightningconductor complete as required.(For horizontal run)

6.10 : Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightningconductor complete as required.(For vertical run)

6.12 : Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

6.14 : Providing and laying G.l. tape 32 mm X 6 mm from earth. electrode directly in ground as required.

6.15 : Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.

5.17 : Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing asrequired.

5.19 : Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

TV CABLE

1.19 : Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required.

TELEPHONE CABLE &IP-PBX

1.18.2 : Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair

1.18.3 : Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.4 Pair

od98718/2020_2021 : Supply and fixing 20 pair PVC Krone box (IP54) with connections and branching points for telecommunication cables

od98737/2020_2021 : Supply and fixing 10 pair PVC Krone box (IP54) with connections and branching points for telecommunication cables

od98748/2020_2021 : Supply and laying 20 pair armoured telephone cable 0.75m below ground level including excavation of soil: ordinary soil

od98754/2020_2021 : MATRIX ETERNITY GENX12SAC IP-PBXSystem Specification Given BelowNormal Trunk Input - 2 Nos | ISDN PRI Card x 1 Nos (30 Voice Chanel) | Digital Key Phone Port x 2 Nos | Analog Extension x 32 Nos (Analog Extension Upgrade up to 200 & IP Extension upgrade up to 999)

od98765/2020_2021 : Supply, Installation, Testing & Commissioning of MATRIX EON 310 Digital Key Phone

od98776/2020_2021 : Supply, Installation, Testing & Commissioning of Panasonic KX-TS500MX Corded Landline Phone

od98779/2020_2021 : Supply, Installation, Testing & Commissioning of PPM Module

od98775/2020_2021 : Supply and Installation of fully loaded network rack of make Dlink of size 9U<br>

UTP CABLE &NETWORK

1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

1.53.2 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required2 run of Cable

1.53.3 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required3 run of Cable

od98685/2020_2021 : Supply and fixing ethernet RJ 45 Cat 6 single socket with wall face plate fitted on wall with steel screws on Box including cost of box<br>

od98703/2020_2021 : Supply and Installation of fully loaded network rack of make Dlink of size 4U<br>

od98710/2020_2021 : Supply and Installation of 16Port Fully Loaded Patch Panel with RJ 45 Keystones confirming TIA / EIA 568 standards of make DLINK or equivalent <br>

od98719/2020_2021 : Supply & Crimping D-Link RJ 45 Cable Connector<br>

od98736/2020_2021 : Supply and installation of 16 Port 10/100/1000 mbps network switch of make Dlink or equivalent <br>

od98747/2020_2021 : Supply and fixing of 3 meter Patch Code of Standard Make & model D-Link/ i BALL or equivalent with the following specification,Model No: iB-PPC5E3MUnshielded Twisted Pair4 Pairs, 24 AWG Stranded cable CAT5E Snag less Patch cord is designed with “Legule technology” for easy installation Strain-relief boot design UTP plug with poly-carbonate housing for durability UTP plug with 50 micron Gold over Nickel contacts Exceeds the requirement of EIA/TIA 568C standards in 3 m - Grey color

od98753/2020_2021 : Supply and fixing of Patch Code 2 meter of Standard Make & model D-Link/ i BALL or equivalent with the following specification/Model No: iB-PPC5E2M/Un shielded Twisted Pair/4 pairs, 24 AWG /Stranded cable CAT5E Snag less Patch cord is designed with “Legule technology” for easy installation. Strain-relief boot design UTP plug with poly carbonate housing for durability UTP plug with 50 micron Gold over Nickel contacts Exceeds the requirement of EIA/TIA 568C standards in 2 meters - Grey color

od98764/2020_2021 : Supply and installation of 24 Port 10/100/1000 mbps network switch of make Dlink or equivalent <br>

od98775/2020_2021 : Supply and Installation of fully loaded network rack of make Dlink of size 9U<br>

od98780/2020_2021 : Supply and Installation of 24 Port Fully Loaded Patch Panel with RJ 45 Keystones confirming TIA / EIA 568 standards of make DLINK or equivalent <br>

DISMANTALING - FAN, LIGHT, WIRING SET, SWITCH BOARD, AC, DB, HT CABLES

od98634/2020_2021 : Charges for dismantling existing switch boards of all sizes with switches, sockets,etc without damages and the same stocked at electrical;l store room near the site.& Collected hand Receipt

od98649/2020_2021 : Charges for dismantling existing wiring of light/ fan/ bell/ points without switch boards such as PVC conduits, wire, earthing conductor, circuit mains, etc without damages and the same stocked at electrical;l store room near the site.& Collected hand Receipt

od98663/2020_2021 : Charges for dismantling existing ceiling / wall/ exhaust fan fittings of all sizes with all accessories without damages and stocked at electrical;l store room near the site.& Collected hand Receipt

od98686/2020_2021 : Charges for dismantling existing fluorescent lamp fittings with all accessories such as tube, ball and socket, etc without damages and stocked at electrical;l store room near the site & Collected hand Receipt <br>

od98695/2020_2021 : Charges for dismantling existing cable of sizes 4 to 35 sq.mm with glands, earth clamps, etc without damages and the same stocked at electrical store room near the site.& Collected hand Receipt

od98711/2020_2021 : Charges for dismantling existing DB with MCB, RCCB Isolator etc without damages and the same stocked at electrical & Collected hand Receipt store room near the site.

od98720/2020_2021 : Charges for dismantling existing AC with stabilizer,stat,copper pipe etc without damages and the same stocked at electrical & Collected hand Receipt store room near the site.<br>

od98735/2020_2021 : Charges for dismantling existing angle/ceiling / wall light fittings with all accessories without damages and stocked at electrical store room near the site & Collected hand Receipt<br>

od98746/2020_2021 : Labour charge for dismantilling existing Switch boards, Wiring points wall /ceiling light/fan/ with and with out ceiling rose , various size DB and accessories like RCCB/ISOLATOR /MCB , AC with stabilizer etc as per site condition and the same handed over to Forest authorities as per direction from From Engineer in charge and the same recorded in Dismantled item register kept in site

NUMBERING OF FITTINGS

1.49 : Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.

od107532/2020_2021 : Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required 6.5 cm, 8 cm or 13 cm height

od107533/2020_2021 : Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required 2.50 cm, 4 cm or 5 cm height

TRANSFORMER &ACCESSORIES

od98687/2020_2021 : Supply and providing emergency push button switch control complete with suitable weather proof enclosure including all necessary connections as required.

od98712/2020_2021 : Supply, Installation, Testing and commissioning of 1 number 11kV/433 v. 500 KVA Dry Type Transformer with Cu wound 3 Phase AN cooled, Vector DYN-11 with off circuit tappings from +5% to -10% in steps of 2.5% changeable by tap links provided, with LV terminals suitable for 3 runs of PVCA /AYFY Cable and HV terminals connected to Existing HT Panel(Excluding cost Laying of HT Cable as per IS/Electrical Inspectorate standard norms)<br>Including all Labour charge etc as per the direction from Engineer in charge

od98721/2020_2021 : `Supply Installation testing and Commissioning of 11 KV/433VCopper wound 11 KV Oil filled Out Door Vector DYN- 11 transformer ONAN with off load Circuit tappings from +5% to -10 % in step of 2.5 % first fill of Oil up to MOL in the conservator with cable box on HV side and LV Cable box suitable for 2 runs of3.5x300 sqm XLPE cable with all other standard fitting the accessories conforming to IS 1180 level 2 . The Whole unit fitted on the existing Plinth (Excluding cost Laying of HT Cable as per IS/Electrical Inspectorate standard norms)<br>Including all Labour charge etc as per the direction from Engineer in charge ,etc complete<br>

DIESEL GENERATOR &ACCESSORIES

od98633/2020_2021 : "Supply, installation, testing and commissioning of 400KW/500 KVA, AMF silent DG set with CPCB II approved acoustic enclosure and anti vibration pads as per CPCB norms comprising of Cummins Make –Model KTAA19-G10,/modelC15 Make CAT Radiator Cooled, Diesel engine,or suitable equivalent model radiator cooled diesel engine developing 400/320 BHP at 1500 RPM or suitable nearest BHP/RPM complete with standard accessories coupled to stamford /KEL / equivalent alternator rated at400KW/500 KVA, at 415 Volts,mounted on channel iron base frame complete with fuel tank of 8 hour running or 690 Lr / suitable nearest capacity, standard manual / electronic control panel and 1 no 12 volt battery with lead wire terminals anti vibration mounting pads etc as per electrical inspectorate approval. Including loading and unloading charges and all duties and taxes and including cost for extending exhaust pipe up to the roof top of DG set building by using B class GI/MS pipe of suitable size formation of foundation and installation. Including providing emergency push button. etc complete.Technical Data<br>Latest Technology and unmatched Performance, Environment Friendly Power, Lowest operating cost& comprehensive warranty, single source power assurance,<br>Engine -Technical Data Generator Set Specification Model QSN14-G2 Duty Prime Prime Power Rating kVA / kWe400 No. of Phases 3 Phase 1 Phase Output Voltage (V) 415 V 230 V Power Factor 0.8 (lagging) 0.8 (lagging) Current (3 phase/ 1 phase) (A) 70 217 Frequency (Hz) and RPM 50 Hz, 1500 RPM Engine Specification Make Cummins Model KTAA19-G10, /modelC15 Make CAT - MoEF Certified Power (hp) 84 Required Power for Rated kVA (hp) 66 Cooling Liquid Cooled (EG Complete 50:50) Aspiration -Turbocharged, Charge Air Cooled No. of cylinders 4 Bore (mm) x Stroke (mm) 95 x 115 Compression ratio 19:1 Displacement (litre) 3.3 Fuel High Speed Diesel Fuel consumption @75% load with radiator and fan* (litre/hr) 9.6 110.15 Fuel consumption @100% load with radiator and fan* (litre/hr) 12.44 13.28 Performance class of generator set ISO 8528-5 G2 Starting system 24 V DC Electrical Lube oil specification CI4+ 15W40 Lube oil sump capacity, High-Low level (litre) 7 - 5.5 Total lubrication system capacity (litre) 7.9 Lube oil consumption @ full load** (litre/hr) 0.01 Total coolant capacity (litre) 13 Exhaust pipe size (inch) 3 Total wet weight (Engine +Radiator) (kg) 552 Length x Width x Height (Engine) (mm) 1502 x 888 x 1219 Mean piston speed (m/s) 6 Combustion air intake @100% load (±5%) (cfm) 160 Exhaust Temperature (°C) 490 <br> Alternator Specification - Make Alternator frame Enclosure Voltage regulation (Max.) Class of Insulation Winding Pitch Stator Winding Rotor Waveform distortion/ Total Harmonic Distortion Maximum Unbalanced Load across phases# Telephonic Harmonic factor Stamford etc complete<br>with Generatar panel board consisting of 800A ACB set at 680 A with suitable rating os O/L protection ELR multifinction meters Watt meter Powerfactor meter indication lamp<br> Including CC Foundation off MIX 1:2:3& plastering .etc complete"

od98664/2020_2021 : Charges for insulating silencer with mineral/glass wool <br>and aluminium cladding for 400KW/500 KVA,DG set

ELECTRICAL SAFETY EQUIEMENT

od98651/2020_2021 : Supply and providing 4 Kg.ABC type Fire Extinguisher with hose and clamps including fixing it to wall as required.

od98665/2020_2021 : Supply and providing 2mm thick Elastomeric fire retardent insulating mat as per IS 15652/2006 to withstand 3.3 KV dielectric strength. (2012 kpwd approved rate unit meter square)

od98688/2020_2021 : Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required.(2012 kpwd approved rate)

od98696/2020_2021 : Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision(2012 kpwd approved rate )

od98726/2020_2021 : Supplying and fixing SMC JUNCTION BOXES Junction Box has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged,Shock proof and rustproof, Rot-proof and termite resistant, Cable entry from bottom and/or sides, 100% weatherproof, Pole mounting arrangement, Tamper proof, Pilferage proof, Restricts unauthorised tapping, Maintenance-free, sintex smc junction boxes

od98734/2020_2021 : Electrical Safety Gloves class 0

od98745/2020_2021 : Electrical Safety Gloves class 2

od98752/2020_2021 : Supply and providing 2.5mm thick 2mx1m wide electrical grade chequered type rubber mat to withstand 15KV dielectric strength conforming to IS 2257

od98763/2020_2021 : Supply and providing 3mm thick 2mx1m wide electrical grade chequered type rubber mat to withstand 15KV dielectric strength conforming to IS 2257

2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

2.22 : Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

public announcement system

od98631/2020_2021 : Supply, Installation, Testing & Commissioning two-way counter commu-nication system ,exclusively designed for easy and effective conversation across counter with transparent security barriers. It consists of an attendant unit,a customer unit and a power supply unit, which are easy to install and simple to connect through dedicated cables as supplied with the system , specifications 2W(max)in each amplifier,microphone Element : Electric condenser in both the units auto mute "on" : Enables after 30 second (approx), power requirement : AC220-240V,50/60HZ , protections : AC fuse1X.5A, Attendant unit : W116 X H65 X D170 mm(w/o gooseneck) ,customer unnit ^98 X D52 mm Power supplay unit W85 X H58 X D150mm included all accessories <br> AHUJA CCS-2300 or equivalent.<br><br><br>

od98653/2020_2021 : Supply, Installation, Testing & Commissioning of 4U Rack with Castors, Shelves, Cooling fan, PDU etc<br>

od98666/2020_2021 : Supply and Laying of 2 core 1.5 sq. mm. of multi-core PVC insulated & PVC sheathed 650/1100 V grade copper conductor round flexible speaker cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.<br>

od98690/2020_2021 : Supply & laying of one number PVC insulated and PVC sheathed armoured coper speaker cable grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).<br>2.5 Sqmm Aromured Speaker Cable ,Cable<br>Varsha/ Belden/ Klotz or Equivalent<br>

1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

1.53.2 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required2 run of Cable

od98733/2020_2021 : Supply, Installation, Testing & Commissioning of All-In-One digital audio source device CD-Player, MP3 player and AM/FM RDS tuner, USB slot and SD/MMC card support, Wave, MP3, WMA support, front pannel and RS 232 control, LCD Disply.<br><br>AUDAC- CMP30 or Equivalent

od98744/2020_2021 : Supply, Installation, Testing & Commissioning of WALL PANEL CONTROLLER 45 X 45 MM<br><br>AUDAC- DW3020 or Equivalent

od98751/2020_2021 : Supply, Installation, Testing & Commissioning of QUAD-CHANNEL POWER AMPLIFIER 4 X 480W 100V<br><br>AUDAC- PMQ480 or Equivalent

od98762/2020_2021 : Supply, Installation, Testing & Commissioning of 16-ZONE DIGITAL PAGING MICROPHONE with 32 cm electret condenser gooseneck microphone, cardioid pickup pattern, built-in limiter, clear output signal. LED status indicater, CONFIGU<br><br>AUDAC- APM116 or Equivalent

od98774/2020_2021 : Supply, Installation, Testing & Commissioning of 9x8 multimedia digital audio matrix system, DSP, with RS-232, TCP/IP (RJ45),Wall panel (RS-485), Web, touch control App , 8 x Stereo, 2 x Balanced Priority, 82 x Priority Contact, 8 O/P, 8 x NO/NC contacts, optioal touch screen compatibility<br>AUDAC- M2 or Equivalent

od98781/2020_2021 : Supply, Installation, Testing & Commissioning of outdoor IP66, 2-way horn loaded loudspeaker for long-throw, full range reproduction of music and speech1" high frequency compression driver and a 5" mid/low frequency driver, 30 Watts RMS, 30/15/7.5@ 100V,Frequency Response (± 3 dB) 110 Hz - 16 kHz, Sound Pressure (Max. W/1m) @ 100 V 113 dB, Dispersion H110°x V 60°, Impact & UV resistant ABS with powder coated Steel Bracket.<br>AUDAC- CHA530 or Equivalent

od98785/2020_2021 : "Supply, Installation, Testing & Commissioning of outdoor, IP55 2 Way Speaker with 1” dome tweeter and a 5 1/4”low-frequency loudspeaker, capable of delivering a power of 50 Watt RMS @ 8 Ohm or 40/20/10 Watt@ 100 or 70 V,Sensitivity (1W/1m) 87 dB, Freq.Response (± 3 dB) 70 Hz - 18 kHz, Dispersion 110°V x 110°H, Operating temperature -25 °C ~ 70 °C, aluminium front Grill & Brackets, ABS Body.<br><br>AUDAC-WX502MK2/OB or equivalent"<br>

WATER TREATMENT PLANT

od98667/2020_2021 : Supply installation testing commissioning 450 KLD water filtaration plant including providing and fixing the following equipments/components etc as required.<br>Filter feed water Pump<br>Supply installation and testing and commissioning of 2 Nos (1 No working + 1 No Standby) Submersible pump set 3 Hp, three phase, 50 Hz AC power supply having discharge 20 MCH at head of 30 Mtrs, cast iron Material of Construction,with cutter facility and open impellor including providing Delivery Valves ( Ball valve )-1 No, Non Return Valve- 1 No ( Wafer Type), Delivery cPVC Pipe lines of suitable dia : 1 Lot, Flexible hose 12 kg/Cm2, Fasteners & Gas cut : 1 Lot ( SS 304 ), Pressure Gauge & Fittings : 1 Nos-0-7 Kg/cm2- 4” Dial with ½” Needle valve etc as required. ( Preffered make: Kirloskar/KSB ).<br>Cl Dosing pump<br>Supply installation and testing and commissioning of 2 Nos (1 No working + 1 No Standby) Chlorine Dosing Pump 40 W , Single phase,50 Hz AC,suitable for pumping 2 lph @ 4 kg/cm2, Material of construction - PP, Electronic Metering Pump including providing 1 No 50 Ltr capacity HDPE Tank etc as required. ( Preffered make:LMI/ E DOSE ).<br>Pressure Sand Filter with activated Carbone<br>Supply installation and testing and commissioning of Pressure Sand Filter with activated Carbone made upof MS with Epoxy coated, Diameter : 1200mm,Height on Straight : 2100 imm, capable of liquid Flow : 20m3/hr, Butterfly Valve 75mm 5 nos, Moc of Valve : Abs, Size of Valve : 75 NB , Distribution Systems- Inlet : Strainer, Outlet : Strainer, Pressure Gauge : 2 Nos- 0-7 Kg/cm2 with isolating Valves including providing Gravels & quartz white Sand and activated Carbone ( Under Bed Media ( Pebble , silex) :680 Kgs, Under Filter Media( gravel, sand) : 1840 Kgs, quantity of activated Carbone : 300 kg ) etc as required. ( Preffered Make : CAP/IEL/ THERMAX ). <br> lime Dosing<br>Supply installation and testing and commissioning of 1 No lime Dosing ( PH booster), made of FRP storage tank : 100 litrs, Flow rate - 5 to 10 lph, top mounted dosing control valve etc as required. ( preffered Make : CAP/E- dose/LMI ). <br> Providing and fixing 2 Nos Level Cut Off Arrangements to control panel cable AND FLOAT : As per manufacturers specification etc as required.<br>FINE FILTERATION 5000 LPH -<br>Providing and fixing 1 No UV Disinfectant unit made of SS 316, coli form removal rate : 99.%, low pressure mercury vapour type ,minimum life of lamp : 9000 hours, UV dosage : > 60,000 uW – Sec /sq.cm,The UV unit shall have with reactor, cabinet housing, cabinet cooling, treatment chamber, electrical panel, temperature safety control etc as required.<br>COID VIRUS DISINFECTANT CHEMICAL<br>Providing and fixing COID VIRUS DISINFECTANT CHEMICAL unit ( FOR 6 MONTHS), Hydrogen Peroxide Based Powder -- 5 kG, Dilution rate : 10 gm/litr etc as required.<br>Control Panel<br>Fabrication, supply, installation testing and commissioning of floor/wall mounting, dust and vermin proof, cubicle type MV panel board comprising the following components / devices. Fabrication of fully partitioned enclosure for panel assembly using 1.6 mm CRCA sheet as per approved design, alligement and requirement, with front access facility, hinged doors for compartments and earthing the doors using 4 sq mm braided copper conductor including providing interconnection with suitable rated PVC insulated copper conductor cable, Painting with Powder coating after subject to 7 tank process and 2 Nos earth stud etc as required. <br> 63A, TP+NL, 36A, MCCB with thermal magnetic release for adjustable OL protection -1 no. <br>2A, C curve SP MCB - 3 nos.<br>RYB indication lamp, LED type - 3 nos.<br>1 No 3 phase Digital Multi function meter to read V, A, F, PF, kW, kWh Acc class 1 and with RS485 communication port.<br>Providing and fixing 4 Strip aluminium bus bar of 100 A, 415 V capacity with heat shrinkable coloured sleeves complete - 1 set<br> DOL starter suitable for 3 Hp pump set……….2 Nos. <br> MPCP 16 A TP ……….2 Nos. <br>Cable Laying & Inter Connecting Pipe lines works.<br>Providing and fixing necessory interconnection cable from control panel to pump sets, 4 mm dia copper loop earthing, plumping lines with suitable cPVC pipe 50 mm /755 mm complete etc as required. ( Any unforeseen itme are included in the scope of work, nothing extra will be paid........1 Lot.<br>

WATER PUMPS

od98654/2020_2021 : Supply,Erection, Testing and Commissioning of open well submersible pumps (Transfer pumps), capable of lifting 125 LPM of water against a total head of 60m and giving delivery pipe lines connections works up to existing delivery line, Charging to pump from existing motor control cubical panel .testing, commissioning, Including hire charges for tools and plants required for the works.including providing suitable RCC plint for fixing Pump as per direction of Engineer in charge with accessories such as , full way wheel valve , strainer , starter. (approximately 6HP, filling time 4hrs) (From well,for human beings Make:- Kirloskar 50HHF'0612, , 12stage or Equivalent, etc complete<br><br>

od98668/2020_2021 : Supply,Erection, Testing and Commissioning of centrifugal pumps (Transfer pumps), capable of lifting 75 LPM of water against a total head of 70m and giving delivery pipe lines connections works up to existing delivery line, Charging to pump from existing motor control cubical panel .testing, commissioning, Including hire charges for tools and plants required for the works.including providing suitable RCC plint for fixing Pump as per direction of Engineer in charge with accessories such as , full way wheel valve , strainer , starter. (approximately 5HP, filling time 8hrs) (Raw water transfer pump) (From Pond 2, For animals )Make:- Kirloskar- RKB32/14H-3STAGE or Equivalent, etc complete

od98692/2020_2021 : Supply,Erection, Testing and Commissioning of centrifugal pumps (Transfer pumps), capable of lifting 145LPM of water against a total head of 90m and giving delivery pipe lines connections works up to existing delivery line, Charging to pump from existing motor control cubical panel .testing, commissioning, Including hire charges for tools and plants required for the works.including providing suitable RCC plint for fixing Pump as per direction of Engineer in charge with accessories such as , full way wheel valve , strainer , starter. (approximately 6HP, filling time 8hrs) (Raw water transfer pump) (From neyyar reservoir , For animals )Make:- Kirloskar- RKB40-14H- 3stage or Equivalent, etc complete

od98697/2020_2021 : Supply,Erection, Testing and Commissioning of centrifugal pumps (Transfer pumps), capable of lifting 240 LPM of water against a total head of 40m and giving delivery pipe lines connections works up to existing delivery line, Charging to pump from existing motor control cubical panel .testing, commissioning, Including hire charges for tools and plants required for the works.including providing suitable RCC plint for fixing Pump as per direction of Engineer in charge with accessories such as , full way wheel valve , strainer , starter. (approximately 5HP, filling time 8hrs) (Raw water transfer pump) (From neyyar reservoir, human being )Make:- Kirloskar- RKB40/14H-2stage or Equivalent, etc complete<br>

od98714/2020_2021 : Supply,Erection, Testing and Commissioning of centrifugal pumps (Transfer pumps), capable of lifting 75 LPM of water against a total head of 85m and giving delivery pipe lines connections works up to existing delivery line, Charging to pump from existing motor control cubical panel .testing, commissioning, Including hire charges for tools and plants required for the works.including providing suitable RCC plint for fixing Pump as per direction of Engineer in charge with accessories such as , full way wheel valve , strainer , starter. (approximately 5HP, filling time 8hrs) (Raw water transfer pump) (From pond 1,for animals )Make:- Kirloskar RKB32z/14H- 4 or Equivalent, etc complete<br><br>

od98723/2020_2021 : Supplying and fixing of CI Foot valve of 50mm dia, heavy type including all accessories.<br>Make:- Kirloskar or Equivalent

od98732/2020_2021 : Supplying and fixing of CI Foot valve of 40mm dia, heavy type including all accessories.Make:- Kirloskar or Equivalent

od98743/2020_2021 : Supplying and fixing of CI Foot valve of 65mm dia, heavy type including all accessories.<br>Make:- Kirloskar or Equivalent

od98630/2020_2021 : Supply,installation,testing and commissioning of Dell Optiplex MFF Computer<br>i3-9100T/ 4GB/ 1TB/ Ubuntu/ 49.53cm (19.5) -E2016H/ NO ODD/ 3 years/ Intel®Dual-Band Wireless-AC 9560+BT5.0(internal Antenna)/ KB & Mouse/ Dell OptiPlex Micro All-in-one Mount for E-Series Monitor<br><br>

od98655/2020_2021 : Supply,installation,testing and commissioning of LG 43LT340C 43 Inch Commercial TV (24x7 working capability)<br>43 Inch | 1,920x1080 Full HD Resolution | Direct BLU Backlight Unit Type | Brightness 400 cd m² | TV Reception: ATSC - Clear QAM - VSB, Analog NTS |HDR | HDR Dolby Vision | Audio Output: 10W + 10W | Speaker System: 2.0 ch | USB Cloning, WOL, SNMP, Diagnostics (USB), HTNG-CEC (1.4), HDMI-CEC (1.4), Multi IR Code, PDM (Public Display Mode), Welcome Video | Screen, External Speaker Out, RJP Compatibility, Auto Off | Sleep Timer, <br>Motion Eye Care, Chromecast Dongle Anti-theft Cover (Optional, 49 inches only) | Crestron ConnectedⓇ (Network Based Control), DPM, Time Scheduler, Jack Interface Side: HDMI in (1.4), USB (2.0) | ack Interface Rear: HDMI in (1.4), RF In, AV In, Digital Audio Out, PC Audio Input, RS-232C, RJ45, External Speaker Out<br><br>

od98669/2020_2021 : Supplying, installation, testing and commissioning of PCth Generation Intel® Core™ i5 processor,Windows 10 Home Single Language 64,4 GB DDR4-2666 SDRAM (1 x 4 GB)1 TB 7200 rpm SATA,Intel® UHD Graphics 630, , Keyboard , wireless Mouse, with all cables and accessories<br><br>(Approved make : HP / DELL / THOSHIBA)"<br><br>

od98693/2020_2021 : Supply,installation,testing and commissioning of APC BX1000UXI 1KVA Offline Ups+65AH External Battery Specification of UPS Max Configurable Power (Watts): 600Watts | 1.0kVA / Efficiency at Full Load: 92.0 % | Output Frequency (not synced): 50Hz +/- 1 Hz | Topology: Square | Waveform type: Stepped approximation to a sinewave | Transfer Time: 8ms typical: 12ms maximum<br>Specification of Battery Battery Type: Flat Plate Battery SMF | Capacity: 65AH | Warranty: 1 Year | Battery Capacity: 65AH | Voltage: 12V | Input Power: 12 V | Material: Hard Plastic<br><br>

od98698/2020_2021 : Supply,installation,testing and commissioning of 3.5 Meter GI Pu coated Pole for Outdoor Bullet Camera with Base<br>

od98704/2020_2021 : Supply,installation,testing and commissioning of HDPE PIPE 1.3/4 Inchincl rout marker<br>

od98722/2020_2021 : Supply,installation,testing and commissioning of Molex 6 Core Armoured Single Mode Fiber Cable<br>

od98731/2020_2021 : Supply,installation,testing and commissioning of Molex CAT6 FR PVC UTP Cable LZ0H<br>

od98742/2020_2021 : Supply,installation,testing and commissioning of Molex 3 Meter Fiber SM Patch cord <br>SC to LC 3 Meter Single mode Fiber Duplex Patch cord / Factory polished, tested and serialized / Cable: 2 Fiberzipcord / Outside Diameter: 2.9mm x 6.0mm / Buffer Diameter: 900μm tight buffer/Cable Sheath Material: LS0H/Cable Sheath Color: Yellow/Operating Temperature: -10°C to 60°C/Insertion Loss (SC End): 0.30dB max./ Insertion Loss (LC End): 0.30dB max<br><br>

od98750/2020_2021 : Supply,installation,testing and commissioning of Molex CAT6 1-meter Patch cord<br>4 pair 24 AWG stranded copper wire / Pre-terminated with WE8W plugs / Slim clear anti-snag slip on boots / Suitable for EIA 568A or 568B wiring / LS0H sheath / RoHS Compliant<br><br>

od98761/2020_2021 : Supply,installation,testing and commissioning of Molex CAT6 Information Outlet (Keystone Jack)<br>Category 6 8W 568A/B / Thermoplastic UL94V-0 rated / Minimum 750 insertion cycles Operating Life / Copper Alloy Contact Material / 50µ” Gold/100µ” Nickel Contact Plating / 100g minimum Contact Force / 11 lbf minimum Plug Retention Force / Dimensions: 23.9mm x 17.8mm x 32.3mm (.94"H x .70"W x 1.27"D) Shipping Weight: 14g (.5 oz.)<br><br>

od98773/2020_2021 : Supply,installation,testing and commissioning of Molex 12 Port loaded Fiber Patch panel<br>12 Port Fiber Patch Panel with splicing holder 1U Rack mounted x 1 Nos | SC Type Single Mode Duplex Adaptor x 6 Nos<br>SC Type Single Mode Pigtail Cables x 12 Nos<br><br>

od98782/2020_2021 : Supply,installation,testing and commissioning of Molex 24 Port Unloaded Patch panel<br>Cat6 24 Port Patch Panel, Unloaded UTP or Shielded - 1U<br><br>

od98789/2020_2021 : Supply,installation,testing and commissioning of Outdoor ISI standard PVC wall mount junction box GS-JB-3020<br>Dimension:300 x 200 x 105 | Shockproof and rustproof | Rot-proof and termite resistant | Cable entry from bottom and/or sides | 100% weatherproof | Pole mounting arrangement | Tamper proof | Pilferage proof | Restricts unauthorised tapping | Maintenance-free | Fire retardant – Class FV-0 as per IS:11731 Part-II or V-0 as per UL-94 | High heat distortion temperature (200°C as per IS:10192)<br><br>Dimension:300 x 200 x 105 | Shockproof and rustproof | Rot-proof and termite resistant | Cable entry from bottom and/or sides | 100% weatherproof | Pole mounting arrangement | Tamper proof | Pilferage proof | Restricts unauthorised tapping | Maintenance-free | Fire retardant – Class FV-0 as per IS:11731 Part-II or V-0 as per UL-94 | High heat distortion temperature (200°C as per IS:10192)<br>

od98790/2020_2021 : Supply,installation,testing and commissioning of Netrack 9U wall mount Rack<br>Dimension: Rack Frame 9U 500mm, Glass Door – 500MM 9U, | Server /IT Rack mount power distribution unit - 1Ph, 230V, 8A, 50/60Hz, 2U standard with 6 X Indian Round Pin 5A, Inlet Plug type 6A Indian Round Pin, 8A Fuse - PDU Rating | 1.8KVA/Side feed-1.5Mt/ Black x 1 Nos | Cantilever Shelf x 1 Nos | ITE / Server Rack Air Circulation module/90CFM x 1 Nos<br>Horizontal Cable Organiser/1U/ Channel on Front x 1 Nos<br>

od98796/2020_2021 : Supply,installation,testing and commissioning of Netrack 22U Floor mount Rack<br>Dimension: Rack Frame 22U - 600x600mm/Steel/FM/Casters Type 2, Glass Door - 600/22U/FM, Metal Door - 600/22U/FM <br>Server /IT Rack mount power distribution unit - 1Ph, 230V, 8A, 50/60Hz, 2U standard with 6 X Indian Round Pin 5A, Inlet Plug type 6A Indian Round Pin, 8A Fuse - PDU Rating 1.8KVA/Side feed-1.5Mt/ Black x 2 Nos | 600 MM Full Shelf x 1 Nos 2FAN Air Circulation module/Door Mount/180CFM x 1 Nos | Horizontal Cable Organiser/1U/ Channel on Front x 1 Nos | Mounting Hardware-CR (Pack of 20) x 1 Nos<br><br>

od98801/2020_2021 : Supply,installation,testing and commissioning of Empty Fiber termination box<br>Dimension: 86x86x27 mm | Plastic | IP66 Rating<br><br>

od98804/2020_2021 : Supply,installation,testing and commissioning of Molex Fiber pigtails<br>1.5 meter | Single Mode | SC Type <br><br>

od98809/2020_2021 : Supply,installation,testing and commissioning of Syrotech Bi-Directional Fiber Media Convertor (Transmitter + Receiver) 10/100/1000Mbps auto sensed | Full duplex and half duplex auto sensed | Fiber Port: SC | Distance: Up to 20 KM | Copper Port: RJ45 | Distance: Up to 100 Mtr<br>

od98815/2020_2021 : Supply,installation,testing and commissioning of HPE Aruba 1920 8G 8 Port Web Managed P PoE Switch<br>4 x RJ-45 auto-negotiating 10/100/1000 PoE+ ports, 4 x RJ-45 auto-negotiating 10/100/1000 ports, 65W PoE+ Power budget, up to 11.9 Mbps Throughput, 16 Gbps Routing and switching capacity<br>

od98818/2020_2021 : Supply,installation,testing and commissioning of HPE Aruba X120 1G SFP LC LX (JD119B) SFP Module<br>1G SFP LC LX Transceiver Single Mode | 1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX) | Distance supported maximum 10KM<br>

od98822/2020_2021 : Supply,installation,testing and commissioning of HPE Aruba 1920s 24 Port Web Managed PoE+ Switch 370 Watts Power Budget 24 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only<br>2 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u Type 100BASE-FX)<br>100 Mb Latency < 7.0 µs, 1000 Mb Latency < 2.0 µs, Throughput 77.3 Mbps, Routing/Switching capacity 52 Gbps, Routing table size 32 entries, MAC address table size 16,000 entries, PoE power budget 370 W PoE+, L2 Web Managed<br>

od98825/2020_2021 : Supply,installation,testing and commissioning of Seagate or equivalent Seagate Skyhawk ST8000VX0022 8TB Surveillance HDD<br>SATA 6Gb/s Interface, 210MB/s Sustained Transfer Rate OD (MB/s), 256 MB Cache Memory, Tarnish Resistant, 300,000 Load/Unload Cycles, 1 per 10E15 Nonrecoverable Read Errors per Bits Read, 8760 Power-On Hours per Year (24×7), 3 Year Warranty<br><br>

od98827/2020_2021 : Supply,installation,testing and commissioning of HIKVISION or equivalent<br> (DS-9664NI-I8) Project Series 64 CH 4K NVR <br>Incoming bandwidth 320Mbps | Outgoing bandwidth 256 Mbps | CVBS output (Optional) 1-ch | BNC (1.0 Vp-p, 75 Ω) | resolution: PAL: 704 × 576 | NTSC: 704 × 480 | Decoding format H.265/H.265+/H.264/H.264+/MPEG4 | Audio output 2-ch | RCA (2.0Vp-p, 1 KΩ) | Network protocols TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS | 1 eSATA interface | USB interface Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0 |Dual-OS design to ensure high reliability of system running | HDD hot swap with RAID0, RAID1, RAID5, RAID6 and RAID10 storage scheme configurable | ANR technology to enhance the storage reliability when the network is disconnected | Up to 64-ch 12 MP IP cameras can be connected | Full channel recording at up to 12MP resolution | Up to 8 SATA interfaces and 1 eSATA interface connectable for recording and backup | Rack Mounted

od98830/2020_2021 : Supply,installation,testing and commissioning of HIKVISION or equivalent DS-1272ZJ-110 Wall Mount Kit Aluminium alloy material with surface spray treatment | Better waterproof design | 122×120×169 MM Dimension | up to 480g weight<br>

od98831/2020_2021 : Supply,installation,testing and commissioning of HIKVISION (DS-2CD3143G0-IS) Project Series 4 MP Network Vandal Dome Camera x 34 Nos<br>1/3" Progressive CMOS | ICR | Colour: 0.01 Lux @(F1.2; AGC ON) | 0lux with IR | 2688x1520:25fps(P)/30fps(N) | H.265+/H.265/H.264/MJPEG | DC12V & PoE | 120dB WDR | 3D DNR | BLC | HLC | 5 VCA | IR range: up to 40 meter |Three streams| 3-Axis adjustment | 2.8 MM Fixed Lens | Audio/Alarm IO connectors | Built-in micro SD/SDHC/SDXC card slot, up to 128 GB | IP67, IK10 | Behaviour Analysis (Line crossing detection, intrusion detection, unattended baggage detection, object removal detection) | Exception Detection (Scene change detection, audio exception detection ) | Face Detection | Power Supply 12 V DC ± 2 5 %, Φ 5.5 mm coaxial power plug PoE (802.3af , class 3)| Power Consumption and Current 12 VDC, 5 A, max. 6 W PoE (802.3af, 37 V to 57V), 0. 2 A to 0. 1 A, max. 7 .5W| API ONVIF (PROFILE S, PROFILE G), ISAPI<br>

od98835/2020_2021 : Supply,installation,testing and commisioning of HIKVISION (DS-2CD3643G1-IZS) Project Series 4MP Network Motorized Varifocal Bullet Camera <br>1/3" Progressive CMOS | ICR | Colour: 0.01 Lux @(F1.2; AGC ON) | 0lux with IR | 2688x1520:25fps(P)/30fps(N) | H.265+/H.265/H.264/MJPEG | DC12V & PoE | 120dB WDR | 3D DNR | BLC | HLC | 5 VCA | IR range: up to 60 meter | 3-Axis adjustment | Motorized vari-focal lens (2.7 to 13.5 mm) |Auto-Iris DC drive| FOV :Horizontal FOV: 106° to 27°, Vertical FOV: 56° to 16°, diagonal FOV: 128° to 31°| Video Bit Rate 32 Kbps to 16 Mbps |Three Stream Support | Audio Alarm IO connectors | Audio Compression G722.1/G.711/G726 /MP2L2 /PCM /MP3|Audio Bit Rate 64Kbps(G.711)/16Kbps(G.722.1)/16Kbps(G.726)/32-192Kbps(MP2L2)/8Kbps-320Kbps(MP3)|Built-in micro SD/SDHC/SDXC card slot, up to 128 GB | Protocols TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour, SSL/TLS|IP67, IK10 | Behaviour Analysis (Line crossing detection, intrusion detection, unattended baggage detection, object removal detection) | Exception Detection (Scene change detection, audio exception detection ) | Face Detection |ROI Supported on Main and Sub stream| Security: Password protection, complicated password, HTTPS encryption, 802.1X authentication (EAP-TLS 1.2, EAP-LEAP, EAP-MD5), watermark, IP address filter, basic and digest authentication for HTTP/HTTPS, WSSE and digest authentication for ONVIF, TLS1.2|Power Supply 12 VDC ± 25%, terminal block PoE (802.3at, class 4)| Power Consumption and Current 12 VDC, 1.2A, max. 14.5W PoE (802.3at, 42.5V to 57V), 0.43A to 0.3A, max. 18W<br>

od98837/2020_2021 : Supply Crimping D-Link RJ 45 Cable Connector<br>

od98629/2020_2021 : Supply and assist in erection, testing and commissioning of dust and vermin proof,floor mounted,free standing cubicle type,communicable type 11KV Metal Enclosed Outdoor Extensible at one end ,Compact Ring Main Unit {RMU}made out of welded pressure tank of IP66 class of protection fully compartmentalized complete with hinged and earthed front doors interlocked with the earth switch.The switch gear should have the minimum degree of protection (in accordance with IEC 60529)<br>- IP 66 for the tank with high voltage components<br>- IP 54 for the front covers of the mechanism<br>- IP 54 for the cable connection covers <br>Supply and installation of the unit costing of 11KV, 630A, 20KVA,Motor operated,Compact,Outdoor,with O/C &EF self powered relays extensible at one end ,non drawout type,CCV +(2nos.Load Break Switch(OD)incomer and 1 no. fixed motor operated Vacuum Circuit Breaker(VL) outgoing or GCB(SF6)compact gas insulated Ring Main Unit,All live parts enclosed (SF6)IN a robotically welded pressure steel tank of IP 67 class of prote

TIMER SWITCH &LIGHT SENSOR

od98628/2020_2021 : Supply, conveyance installation testing and commissioning of Timer switches fitting complete with all accessories and giving connection as required,3 module DIN Daily type .<br>TECHNICAL DATA -3P Module 24 hour program ,programmable every 15min .,backup of 100 hrs ., current capacity 16A,with 1 changeover (1 CO) <br>

15.1 : Supplying,Installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10 Amp, for mounting height up to 2.8 Mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming and site etc. complete as required

SCHEMATIC DRAWING FEE ,INSPECTORATE FEE &KSEB CONNECTION FEE

od98627/2020_2021 : Preparation of 3 set of Electric schematic drawing as per Electrical Inspectorate & KSEB rules and get Approval from Electrical Inspectorate concerned , one set of Approved schematic shall be laminated with good quality laminated paper and the same shall be fixed as directed by Engineer in charge <br>(Rate for each set ) Except statutory fee at Electrical inspectorate

od98656/2020_2021 : Provision for statutory fee (like Schematic approval fee, Testing of TriVector meter /CT/Multi Function meter etc as required ) at Kerala State Electricity Licensing Board -Amount will be reimbursed after submitting original document/receipt

od98670/2020_2021 : Supply and installation laminated all Electrical Inspectorate final approved drawings with copy of final energisation sanction order on the wall of power house.

od102623/2020_2021 : Provision for statuary fee at KSEB Limited for effecting Electric connection original amount will be reimbursed after submitting original receipt (External Electrification not included in this item)

od102624/2020_2021 : Provision for statuary fee at KSEB Limited for effecting Electric connection original amount will be reimbursed after submitting original receipt (External Electrification not included in this item)

LT AYFY CABLING

od124447/2020_2021 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.<br>2 core 16 sq mm

90.12.5.5 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 25 sq mm

90.12.5.28 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 35 sq mm

90.12.5.30 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 70 sq mm

90.12.5.31 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 95 sq mm

90.12.5.32 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 120 sq mm

90.12.5.34 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 185 sq mm

90.12.5.35 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 240 sq mm

90.12.5.36 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 300 sq mm

90.12.5.37 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 400 sq mm

90.12.5.41 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm

90.12.5.42 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 25 sq mm

90.12.6.4 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.2 core 16 sq mm

90.12.6.5 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.2 core 25 sq mm

90.12.6.28 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 35 sq mm

90.12.6.30 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 70 sq mm

90.12.6.31 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 95 sq mm

90.12.6.32 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 120 sq mm

90.12.6.34 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 185 sq mm

90.12.6.35 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 240 sq mm

90.12.6.36 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 300 sq mm

90.12.6.37 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 400 sq mm

90.12.6.41 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.4 core 16 sq mm

90.12.6.42 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.4 core 25 sq mm

90.12.7.4 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 16 sq mm with factory made clamp

90.12.7.5 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 25 sq mm with factory made clamp

90.12.7.28 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp

90.12.7.30 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 70 sq mm

90.12.7.31 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 95 sq mm

90.12.7.32 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 120 sq mm

90.12.7.34 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 185 sq mm

90.12.7.35 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 240 sq mm

90.12.7.36 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 300 sq mm

90.12.7.37 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 400 sq mm

90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp

90.12.7.42 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp

LT END TERMINATION OF CABLES AND EARTH CLAMS

9.1.3 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 16 sq. mm (22mm)

9.1.4 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 25 sq. mm (22mm)

9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)

9.1.23 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

9.1.24 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)

9.1.25 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)

9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

9.1.29 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)

9.1.30 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 300 sq. mm (70mm)

9.1.31 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm)

9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)

PROTECTION OF CABLES

90.12.10.2 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.12.10.3 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation63/50 mm or nearest size

90.12.10.5 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation90/75 mm or nearest size

90.12.10.7 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation120/102.5 mm or nearest size

90.12.12.10 : Supply & laying of DWC pipe in ordinary soil 1.2 m below ground level including excavation160/135 mm or nearest size

12.37 : Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.

12.38 : Supplying and fixing of light class G.I. pipe of 80 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.

12.39 : Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.

7.9 : Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X50 cm at the top with a thickness of 10cm including inscription duly engraved as required.

7.10 : Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate withinscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixingthe same in ground as required.

CABLE BARE EARTHING AND EARTH SOCKET

90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.3.1 : Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)20 x 3 mm GI strip

90.16.3.8 : Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)20 x 3 mm copper strip

90.16.4.1 : Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).20 x 3 mm GI strip

90.16.4.7 : Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).20 x 3 mm copper strip

90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

CABLE TRAY

4.1.2 : Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness

4.1.3 : Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.225 mm width X 50 mm depth X 1.6 mm thickness

4.1.4 : Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness

4.1.5 : Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.375 mm width X 50 mm depth X 2.0 mm thickness

4.1.6 : Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.450 mm width X50 mm depth X 2.0 mm thickness

4.1.7 : Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.600 mm width X 50 mm depth X 2.0 mm thickness

SOLAR GRID-INVERTING SYSTEM

od98642/2020_2021 : Supply, Installation, Testing and commissioning of on grid solar photovoltaic Power Plant , Conforming to MNRE Specification as amended, consisting of Mono/Poly crystalline silicon solar cell, Net metering facility, necessary protections , earthing mounted on Aluminium /GI Structure of suitable strength with following components complete as required.<br>a)Solar photovoltaic module of capacity 330 wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part -2, Solar photovoltaic Module conversion efficiency shall not be less than 16.5%, PV Modules used in solar power plants /systems must be warranted for their out put peak watt capacity, which should not be less than 90% at the end of 10 years and 80 % at the end of 25 years.<br>b)Power conditioning unit (PCU) of 350-800 V DC input voltage range and 400 V AC, three phase 4 wire , 50 hz +/- 2.5hz, out put voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the grid voltage frequency.<br>c)Data monitoring system complete with all accessories.<br>d)Fixing of array junction box & main junction box with IP 65 Protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc as required <br>f) connection and interconnection by supplying & fixing required size XLPE insulated copper conductor 1.1 KV grade armoured power and control cable between solar modules, main power cable to grid supply PCU Unit along with supplying & fixing of necessary channel / conduit lugs and other accessories etc as required .( RATE FOR 1 kWp ) COST/kWp

HT END TERMINATION OF CABLES AND EARTH CLAMS

10.4.4 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm

10.5.4 : Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :300 sq. mm

od124083/2020_2021 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:<br>150 sq. mm

HT CABLING

od98661/2020_2021 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 11 KV grade 3 core 300 sqm stranded compact circular aluminium conductor, conductors screened with extruded semi conducting compound XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3KA for I sec.) cores laid up. inner sheath of PVC tape, galvanized steel flat strip armoured, and overall PVC sheathed cable conforming to IS: 7098 part II 1985 with latest amendments using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.<br>3 core 300 sq mm

od98701/2020_2021 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 11 KV grade of 3 core 300 sqm stranded compact circular aluminium conductor, conductors screened with extruded semi conducting compound XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3KA for I sec.) cores laid up. inner sheath of PVC tape, galvanized steel flat strip armoured, and overall PVC sheathed cable conforming to IS: 7098 part II 1985 with latest amendments in the existing masonry open duct as required.<br>3 core 300 sq mm

od98769/2020_2021 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 11KV grade of 3 core 300 sqm stranded compact circular aluminium conductor, conductors screened with extruded semi conducting compound XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3KA for I sec.) cores laid up. inner sheath of PVC tape, galvanized steel flat strip armoured, and overall PVC sheathed cable conforming to IS: 7098 part II 1985 with latest amendments in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.<br>3 core 300 sq mm

od123552/2020_2021 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 3 core 150 sqmm 11KV stranded compact circular aluminium conductor, conductors screened with extruded semi conducting compound XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3KA for I sec.) cores laid up. inner sheath of PVC tape, galvanized steel flat strip armoured, and overall PVC sheathed cable conforming to IS: 7098 part II 1985 with latest amendments using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.<br>3 core 150 sq mm

od123553/2020_2021 : Supply & laying of one No. 3 core 150 sqmm 11KV stranded compact circular aluminium conductor, conductors screened with extruded semi conducting compound XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3KA for I sec.) cores laid up. inner sheath of PVC tape, galvanized steel flat strip armoured, and overall PVC sheathed cable conforming to IS: 7098 part II 1985 with latest amendments in the existing masonry open duct as required.<br>3 core 150 sq mm

od125871/2020_2021 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 11KV grade of 3 core 150 sqmm 11KV stranded compact circular aluminium conductor, conductors screened with extruded semi conducting compound XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3KA for I sec.) cores laid up. inner sheath of PVC tape, galvanized steel flat strip armoured, and overall PVC sheathed cable conforming to IS: 7098 part II 1985 with latest amendments in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.<br>3 core 150 sq mm HT CABLE

25.7 : Designing, fabricating, testing, installing and fixing in position Curtain Wall withAluminium Composite Panel Cladding, with open grooves for linear as well ascurvilinear portions of the building , for all heights and all levels etc. including:a) Structural analysis & design and preparation of shop drawings for pressureequalisation or rain screen principle as required, proper drainage of water to makeit watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium compositepanel cladding in pan shape in metalic colour of approved shades made out of4mm thick aluminium composite panel material consisting of 3mm thick FR grademineral core sandwiched between two Alumini um sheets (each0.5mm thick). Thealuminium composite panel cladding sheet shall be coil coated, with Kynar500based PVDF / Lumiflon based fluoropolymer resin coating of approved colourand shade on face # 1 and polymer (Service) coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backerrods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanisedwith serrations and serrated washers to arrest the wind load movement, fasteners,SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators toprevent bi-metallic contacts all complete required to perform as per specificationand drawing The item includes cost of all material & labour component, the cost ofall mock ups at site, cost of all samples of the individual components for testing inan approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wallwith aluminium composite panel cladding till the handing over of the building foroccupation. Base frame work for ACP cladding is payable under the relevantaluminium item.s The Contractor shall provide curtain wall with aluminiumcomposite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per theapproved shop drawings and as directed by the Engineer-in-Charge.However, for the purpose of payment, only the actual area on the external face ofthe curtain wall with Aluminum Composite Panel Cladding (including width ofgroove) shall be measured in sqm. up to two decimal places.

10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

MS chequered plate &Elastomeric fire retardent insulating mat

od98644/2020_2021 : Supply and providing 2.5mm thick Elastomeric fire retardent insulating mat as per IS 15652/2006 to withstand 11 KV dielectric strength. & Including pasting in frond of panel board

od98647/2020_2021 : Supply and providing 2mm thick Elastomeric fire retardent insulating mat as per IS 15652/2006 to withstand 3.3 KV dielectric strength. & Including pasting in frond of panel board

od98678/2020_2021 : Supply and providing MS chequered plate of suitable thickness including cutting, welding, painting etc. as required for the cable trench covering.<br>

AIR-CONDITIONING SYSTEM

od98652/2020_2021 : Supply ,installation testing and commissioning 1.5 TR Inverter split type air conditioner of full copper tube with5 star with suitable stabilizer for reputed company make and necessary stand to the out door unit with all copper pipes of Standard length (up to 3 meter) in the convenient position in the air conditioner should be of stand make like blue star ,hitachi & sharp

od98679/2020_2021 : Supply and providing every additional length of copper pipe& color Casing cap for Passing Copper pipe,3Core Wire, Sleeve & Wast Water pipe .etc complete<br>

od98684/2020_2021 : SITC of the 8 TR Ceiling Suspended Inverter ductable AC unit equipped with Inverter Scholl compressor units comprising of Indoor Units of adequate Static Pressure as required, washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower with latest technology BLDC fan motor, coil section with DX copper coil, electronic expansion valve, R410 A refrigerent , corded remote control, outer cabinet, vibration isolators, other necessary supports etc., The unit shall be suitable for operation on 3 phase/ single phase AC supply 440 V/230 V ± 10%, 50 Hz . including drain pump, control relay, Temperature Sensors etc. complete as required. ( Low side )<br>

od98702/2020_2021 : SITC of the 22 TR ( single or multiple units 2 x 11 TR ) Ceiling Suspended Inverter ductable AC unit equipped with Inverter Scholl compressor units comprising of Indoor Units of adequate Static Pressure as required, washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower with latest technology BLDC fan motor, coil section with DX copper coil, electronic expansion valve, R410 A refrigerent , corded remote control, outer cabinet, vibration isolators, other necessary supports etc., The unit shall be suitable for operation on 3 phase/ single phase AC supply 440 V/230 V ± 10%, 50 Hz . including drain pump, control relay, Temperature Sensors etc. complete as required. ( Low side )<br>

od98706/2020_2021 : SITC of the 8TR Air conditioning System Inverter ductable AC unit equipped with Inverter Scholl compressor units with Outdoor Unit comprising Outdoor Units with R410A Refrigerant Including first filling for entair system, adequate supporting hardware, Masonry Foundations, Base Frame, Vibration dampers, Power connections, Pipe connections, drain connections, shut off valves etc. The Outdoor Units shall be factory treated using Anti-corrosive black fin coating. High Voltage Cutoff System with Start time Delay, etc. The scope shall also include Supply, Installation, wiring and programming of microprocessor based Controller / Control panel with communications capability. The unit shall deliver the rated capacity at AHRI Conditions. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply.<br>

od98725/2020_2021 : SITC of the 22TR Air conditioning System Inverter ductable AC unit equipped with Inverter Scholl compressor units with Outdoor Unit comprising Outdoor Units with R410A Refrigerant Including first filling for entair system, adequate supporting hardware, Masonry Foundations, Base Frame, Vibration dampers, Power connections, Pipe connections, drain connections, shut off valves etc. The Outdoor Units shall be factory treated using Anti-corrosive black fin coating. High Voltage Cutoff System with Start time Delay, etc. The scope shall also include Supply, Installation, wiring and programming of microprocessor based Controller / Control panel with communications capability. The unit shall deliver the rated capacity at AHRI Conditions. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply.<br>

od98727/2020_2021 : Supplying and Fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required

od98738/2020_2021 : Supplying and Fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications

od98770/2020_2021 : Supply, fabrication, Installation and testing of flexible connections constructed flexible double canvas sleeve in accordance with approved shop drawings and as per the specifications for each Ductable units.<br>

od98771/2020_2021 : Supply and installation of Thermal Insulation of Supply air duct with 13 mm thick closed cell nitrile rubber temperature range from -10ºC to +60ºC, Class O fire category and as per specification.<br>

od98778/2020_2021 : Supply and installation of Acoustic insulation, Material shall be 15 mm thickness open cell Nitrile Rubber.The material should be fibre free. The density of the same shall be within 140-180 Kg/m3.The material should have a thermal conductivity not exceeding 0.050 W/mK. The maximum surface temperature the material should withstand is 105º C and minimum temperature should be -20ºC. The material should confirm to Class 1 rating for surface spread of Flame as per BS 476 Part 7. <br>

od98786/2020_2021 : Supply, fabrication, installation, testing of GI rectangular ducts, 0.7 mm (22 Gauge) Factory fabricated complete with all fittings such as tee, bends, special off shoots, inspection doors, transformation pieces etc. as required as per IS 655 including suspension and supporting arrangement for plenum, duct etc. as required.

od98791/2020_2021 : Supply, fabrication, installation, testing of GI rectangular ducts, 0.63 mm (24 Gauge)Factory fabricated complete with all fittings such as tee, bends, special off shoots, inspection doors, transformation pieces etc. as required as per IS 655 including suspension and supporting arrangement for plenum, duct etc. as required.

od98797/2020_2021 : Supply of all materials and Installation of drain pipe between Indoor unit and drain point including U Trap with 25mm UPVC pipe insulated using 10mm thick Nitrile Rubber tubing as per Engineer instruction.

od98799/2020_2021 : SITC of hard drawn copper pipe 18 G refrigerent piping of 28.6 mm ( 11/8 ). sizes,with copper elbows, tees insulated with gas side 13mm and liquid side 19mm nitrile rubber tubing with 45-60kg/cu.mtrs density and joints sealed with black cotton tape supporting at necessary etc complete .

od98802/2020_2021 : SITC of hard drawn copper pipe 18 G refrigerent piping of 12.7 mm ( 1/2 ). sizes,with copper elbows, tees insulated with gas side 13mm and liquid side 19mm nitrile rubber tubing with 45-60kg/cu.mtrs density and joints sealed with black cotton tape supporting at necessary etc complete .

od98810/2020_2021 : Supply and laying PVC Insulated flexible copper control cable of suitable size as per manufactures specification with saddles / supportes and PVC conduits to connect outdoor unit with Indoor unit etc as required.

od98813/2020_2021 : Supply, installation,testing & commissioning of SMART AIR curatins . steel air curtain (3 MTR/high velocity) without door sensor including aluminum structure

od98817/2020_2021 : Supply, installation,testing & commissioning of SMART AIR curatins . steel air curtain (2MTR/high velocity) without door sensor including aluminum structure

HT PANEL

od98646/2020_2021 : Supply and installation testing commissioning of 630A Factory made HT Panel Set having one Incomer VCB and two outgoing,LBS Indoor Type, Metal Clad Floor Mounted of 11 KV, incorporating Vacuum Circuit Breaker, Panels along with remote control & equipped with all specified accessories i.e. CTs, PTs (Indoor Type), metering and protection system including termination etc.The panel should be Internal Arc fault withstand capacity: Panel enclosure shall be self-supporting floor mounted, indoor, dust and vermin proof, totally enclosed as per IEC 62271-200. Special attention must be given so that all the apparatus shall be designed to obviate the risk of accidental short circuit due to insects, mites, rodents or microorganisms. The inspection window on the VCB door shall be made of toughened glass. As per IEC 62271-200, it should bear the same mechanical strength as that of the enclosure. Circuit breaker shall be mounted on a withdrawable truck which shall be horizontally draw out from service position to isolated position i.e. “Complete Roll on floor type of design”. Cassette type VCB design is not acceptable. Switchgear shall be fully type tested for extended mechanical endurance of M2<br>class as per IEC 62271. Switchgear shall be E2 and C2 electrical parameter compliance. Outgoing (1) Indoor type Load Break Switch Metering Panel with CTS , PT KSEB Metering facility connected to 500 KVA Resin Cast Transformer. Outgoing (2) Indoor type Load Break Switch Panel connected to 315 KVA Cast Resin Transformer.& Include all Electrical Inspectorate statutory fees,etc complete

FROM 500KVA TRANSFORMER-MSB-A PANEL

od124465/2020_2021 : Supply, Installation, Testing & Commissioning of MSB -A , cubicle type, made out of min 2mm thick CRCA sheet (load bearing), totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene / PU gasket etc. The panel shall include supply & installation of following switchgears, metering instruments and accessories as required. The LT panel shall be with validated design and fully comply with requirements of Type Tested Assemblies (TTA) as per IEC 61439-1&2. All MCCB shall confirm to Ics=100% Icu. The enclosure, busbar, busbar supports etc shall take care of normal stress as well as abnormal electro-mechanical stress due to short circuit conditions. The type tested certificates complying with IEC 61439 shall be submitted. ( Approved Makes : L&T Enersys, Schneider BlokSet , ABB , SIEMENS SIEPAN)<br>Incomer<br>*800A, 4P, 50kA, ACB with microprocessor release for adjustable OL, SC & EF protection - 2 no<br>Instruments<br>*2A, C curve SP MCB - 4 set<br>*RYB indication lamp, LED type - 2 set<br>*On, Off, Trip indication lamp, LED type - 2 set <br>*2set 3 phase Digital Multi function meter to read V, A, F, kW, PF, kWh, Acc class 1 and with RS485 communication port.<br>*800/5A 15VA class 1 resin cast CT - 2 set<br>Outgoing.<br>*630A, 4P 36kA, MCCB with microprocessor release for adjustable OL & SC protection - 1 no. <br>*315A, 4P, 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 2 no. <br>*400A, 4P, 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 1 no. <br>*200A, 4P, 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 1 no. <br>*250A, 4P, 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 1 no.

FROM 315KVA TRANSFORMER-MSB-B.PANEL

od124467/2020_2021 : Supply, Installation, Testing & Commissioning of MSB -B , cubicle type, made out of min 2mm thick CRCA sheet (load bearing), totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene / PU gasket etc. The panel shall include supply & installation of following switchgears, metering instruments and accessories as required. The LT panel shall be with validated design and fully comply with requirements of Type Tested Assemblies (TTA) as per IEC 61439-1&2. All MCCB shall confirm to Ics=100% Icu. The enclosure, busbar, busbar supports etc shall take care of normal stress as well as abnormal electro-mechanical stress due to short circuit conditions. The type tested certificates complying with IEC 61439 shall be submitted. ( Approved Makes : L&T Enersys, Schneider BlokSet , ABB , SIEMENS SIEPAN)<br>Incomer<br>*500A, 4P, 50kA, MCCB with microprocessor release for adjustable OL, SC & EF protection - 1 no. <br>Instruments<br>*2A, C curve SP MCB - 1 set<br>*RYB indication lamp, LED type - 1 set<br>*On, Off, Trip indication lamp, LED type - 1 set <br>*1 set 3 phase Digital Multi function meter to read V, A, F, kW, PF, kWh, Acc class 1 and with RS485 communication port.<br>*500/5A 15VA class 1 resin cast CT - 1 set<br>Outgoing.<br>*250A, 4P, 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 2 nos.

FROM-MSB.A-F1-SSB1.PANEL

od124468/2020_2021 : Supply, Installation, Testing & Commissioning of MSB -A F-1, cubicle type, made out of min 2mm thick CRCA sheet (load bearing), totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene / PU gasket etc. The panel shall include supply & installation of following switchgears, metering instruments and accessories as required. The LT panel shall be with validated design and fully comply with requirements of Type Tested Assemblies (TTA) as per IEC 61439-1&2. All MCCB shall confirm to Ics=100% Icu. The enclosure, busbar, busbar supports etc shall take care of normal stress as well as abnormal electro-mechanical stress due to short circuit conditions. The type tested certificates complying with IEC 61439 shall be submitted. ( Approved Makes : L&T Enersys, Schneider BlokSet , ABB , SIEMENS SIEPAN)<br>Incomer<br>*630A, 4P, 36kA, MCCB with microprocessor release for adjustable OL, SC & EF protection - 1 no. <br>Instruments<br>*2A, C curve SP MCB - 1 set<br>*RYB indication lamp, LED type - 1 set<br>On, Off, Trip indication lamp, LED type - 1 set <br>*1 set 3 phase Digital Multi function meter to read V, A, F, kW, PF, kWh, Acc class 1 and with RS485 communication port.<br>*630/5A 15VA class 1 resin cast CT - 1 set<br>Outgoing.<br>*150A, FP, 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 1 nos. <br>*315A, FP, 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 1 no. <br>*200A, FP, 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 2 Nos<br>*160A, 4P, 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 3 no. <br>*125A, 4P, 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 2 Nos.

FROM-MSB.A-F2-SSB2.PANEL

od124469/2020_2021 : Supply, Installation, Testing & Commissioning of MSB -A F-2, cubicle type, made out of min 2mm thick CRCA sheet (load bearing), totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene / PU gasket etc. The panel shall include supply & installation of following switchgears, metering instruments and accessories as required. The LT panel shall be with validated design and fully comply with requirements of Type Tested Assemblies (TTA) as per IEC 61439-1&2. All MCCB shall confirm to Ics=100% Icu. The enclosure, busbar, busbar supports etc shall take care of normal stress as well as abnormal electro-mechanical stress due to short circuit conditions. The type tested certificates complying with IEC 61439 shall be submitted. ( Approved Makes : L&T Enersys, Schneider BlokSet , ABB , SIEMENS SIEPAN)<br>Incomer<br>*250A 4P 36kA, MCCB with microprocessor release for adjustable OL, SC & EF protection - 1 no. <br>Instruments<br>*2A, C curve SP MCB - 1 set<br>*RYB indication lamp, LED type - 1 set<br>On, Off, Trip indication lamp, LED type - 1 set <br>*1 set 3 phase Digital Multi function meter to read V, A, F, kW, PF, kWh, Acc class 1 and with RS485 communication port.<br>*250/5A 15VA class 1 resin cast CT - 1 set<br>Outgoing.<br>*150A, TP+NL 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 2 nos. <br>*63A, TP+NL, 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 13 nos.

FROM.MSB A F3-APFC PANEL

FROM.MSB A-F4 WATER PUMB PANEL

od124607/2020_2021 : Fabrication, supply, conveyance, installation testing and commissioning floor mounting, dust and vermin proof, cubicle type LV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly using 1.6 mm CRCA sheet as per approved design and requirement 2mm for frame , with front access facility, bus bar chambers with aluminium bus , hinged doors for all switch gear compartments and earthing the doors using braided copper conductor and providing indication lamps, digital type Multi function meter suitable CTs, danger notice board etc The board should be powder coating the assembly after subjecting to 7 tank process as required. 2 Nos Copper earth bar of size 25 mm x 3 mm at the rear with 2 No. earth stud. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The panel Board should be fitted on the base frame for panel board using channels of class designation 75 including cutting,welding, drilling holes,painting two coats of synthatic enamel paint over a coat of zinc chromate paint botling the frame to the panel and to the furnished floor using required bolts and nuts making good the dameges colour washing and including providing and fixing the following switch gears etc as required.<br>PUMP PANEL<br>Incomer<br>200A, 3P, 36kA, MCCB with Thermal magnetic release for adjustable OL, SC protection - 1 no. <br>Instruments<br>2A, C curve SP MCB - 4 set<br>RYB indication lamp, LED type - 2 set<br>On, Off, Trip indication lamp, LED type - 2 set <br>1 set 3 phase Digital Multi function meter to read V, A, F, kW, PF, kWh, Acc class 1 and with RS485 communication port.<br>200/5A 15VA class 1 resin cast CT - 2 set<br>Outgoing.<br>32A TP MPCB ……….5 Nos<br>63A, 3P, 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 1 no. <br>40A, TP, 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 1 no.<br> <br>32 A 3P COS……….5 Nos<br>DOL starter suitable for 0-7.5hp pump set ……5 Nos.

FROM.MSB B-F1 SSB-6 & MSB B-F2 SSB-7 PANEL

od124472/2020_2021 : Supply, Installation, Testing & Commissioning of MSB -B SSB-6 , cubicle type, made out of min 2mm thick CRCA sheet (load bearing), totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene / PU gasket etc. The panel shall include supply & installation of following switchgears, metering instruments and accessories as required. The LT panel shall be with validated design and fully comply with requirements of Type Tested Assemblies (TTA) as per IEC 61439-1&2. All MCCB shall confirm to Ics=100% Icu. The enclosure, busbar, busbar supports etc shall take care of normal stress as well as abnormal electro-mechanical stress due to short circuit conditions. The type tested certificates complying with IEC 61439 shall be submitted. ( Approved Makes : L&T Enersys, Schneider BlokSet , ABB , SIEMENS SIEPAN)<br>Incomer<br>*250A, TP+NL, 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 1 no. <br>Instruments<br>*2A, C curve SP MCB - 1 set<br>*RYB indication lamp, LED type - 1 set<br>*On, Off, Trip indication lamp, LED type - 1 set <br>1 No 3 phase Digital Multi function meter to read V, A, F, PF Acc class 1 and with RS485 communication port.<br>*250/5A 10VA class 1 resin cast CT - 1 set<br>Outgoing.<br>*125A, TP+NL, 36kA, MCCB with thermal magnetic release for adjustable OL protection -4nos. <br>*63A, TP+NL, 36A, MCCB with thermal magnetic release for adjustable OL protection -1 no.

FROM.SSB1-F1 SSB-8 MSEUM PANEL

od124589/2020_2021 : Supply, Installation, Testing & Commissioning of MSB -A mseum , cubicle type, made out of min 2mm thick CRCA sheet (load bearing), totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene / PU gasket etc. The panel shall include supply & installation of following switchgears, metering instruments and accessories as required. The LT panel shall be with validated design and fully comply with requirements of Type Tested Assemblies (TTA) as per IEC 61439-1&2. All MCCB shall confirm to Ics=100% Icu. The enclosure, busbar, busbar supports etc shall take care of normal stress as well as abnormal electro-mechanical stress due to short circuit conditions. The type tested certificates complying with IEC 61439 shall be submitted. ( Approved Makes : L&T Enersys, Schneider BlokSet , ABB MNS , SIEMENS SIEPAN)<br>Incomer<br>*320A, TP+NL, 36kA, MCCB with thermal magnetic release for adjustable OL & SC protection - 1 no. <br>Instruments<br>*2A, C curve SP MCB - 3 nos.<br>*RYB indication lamp, LED type - 3 nos.<br>*1 No 3 phase Digital Multi function meter to read V, A, F, PF, kW, kWh Acc class 1 and with RS485 communication port.<br>*320/5A, 10VA, class 1, resin cast CT - 1 set<br>Outgoing.<br>*100A, TP+NL, 36kA, MCCB with thermal magnetic release for adjustable OL protection - 5 nos.<br>note -include all Electrical Inspectorate statutory fees

METERING PANEL-1-8

od124599/2020_2021 : Fabrication, supply, conveyance, installation testing and commissioning floor mounting, dust and vermin proof, cubicle type LV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly using 1.6 mm CRCA sheet as per approved design and requirement 2mm for frame , with front access facility, bus bar chambers with aluminium bus , hinged doors for all switch gear compartments and earthing the doors using braided copper conductor and providing indication lamps, digital type Multi function meter suitable CTs, danger notice board etc The board should be powder coating the assembly after subjecting to 7 tank process as required. 2 Nos Copper earth bar of size 25 mm x 3 mm at the rear with 2 No. earth stud. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The cubical panel board shall have 9 Nos compartments of size not less than 300 mm x 600 mm and viewing glass for all outgoing compartment doors of suitable size but not less than 100 mm x 100 mmx 3 mm including providing interconnection between all the switch gears with 6 Sqmm PVC insulated copper conductor cable. The panel Board should be fitted on the base frame for panel board using channels of class designation 75 including cutting,welding, drilling holes,painting two coats of synthatic enamel paint over a coat of zinc chromate paint botling the frame to the panel and to the furnished floor using required bolts and nuts making good the dameges colour washing and fixing the following switch gears etc as required. ( Note: All the doors should have facility for sealing by KSEB ).<br>Incomer<br>100 A 4 pole switch Disconnector unit (Isolator) complete with handle assembly.<br>Instruments<br>2A, C curve SP MCB - 1 set<br>RYB indication lamp, LED type - 1 set<br>Outgoing.<br>Providing and fixing 1 No 5 to 30 A single phase kWh meters with LCD display ( KSEB tested )……8 Nos.<br>32 A RW Cutout fuse….8 Nos<br>32 A NL…8 Nos<br>32 DP SFU -8Nos<br>note -include all Electrical Inspectorate statutory fees

HT PANEL FOR 315 KVA TRANSFORMER

od126021/2020_2021 :  Supply and installation testing commissioning of out door type 630A Factory made HT Panel Set IP 54, having one No Incomer LBS and One No outgoing,LBS out door, Metal Clad Floor Mounted of 11 KV. The Break Switch Panel with 630A 350 MVA HT Switch Fuse Unit with 50A HT HRC Fuse with earth switch and 230V shunt tripe coil includin provading remort operation,space heater ,earthing etc as required.<br>

EXISTING COTTAGE PANEL 1-2

od125993/2020_2021 : "Supplying and fixing of 12 ways surface/ recess<br>mounting, vertical type, 415 V, distribution board of<br>sheet steel, dust protected, duly powder painted, inclusive of<br>200 A tinned copper bus bar, common neutral link, earth bar,<br>din bar suitable for accomodating incomer 4 Pole MCCB and 10 Nos 32 A SPN MCBs and including providing and fixing 1 No 100A 4P MCCB 25 KA and 10 Nos 32 A SPN MCB 10 KA,including cable end box etc as<br>required . ( L&T make : Tier PPI DB model No. DBTPI01254 or similer )."<br>

FROM SSB6-F4 WARDENS COTTAGE METERING PANEL

od124598/2020_2021 : Fabrication, supply, conveyance, installation testing and commissioning of floor mounting, dust and vermin proof, cubicle type MV panel board comprising the following components / devices & complying to IS 8623 (with latest amendments). Fabrication of fully partitioned enclosure for panel assembly using 1.6 mm CRCA sheet as per approved design, alligement and requirement, with front access facility, hinged doors for compartments and earthing the doors using 4 sq mm braided copper conductor. The cubical panel board shall have a compartment of size not less than 300 mm x 600 mm and viewing glass for all outgoing compartment doors of suitable size but not less than 100 mm x 100 mmx 3 mm including providing interconnection between all the switch gears with 6 Sqmm PVC insulated copper conductor cable, Painting with Powder coating after subject to 7 tank process and 2 Nos earth stud etc as required. ( Note: The doors should have facility for sealing by KSEB ).<br>32 A 4 pole switch Disconnector unit (Isolator) complete with handle assembly.<br>i) Providing and fixing 1 No 5 to 30 A single phase kWh meters with LCD display ( KSEB tested )……1 No.<br>ii) Supply and fixing 32A porcelain fuse cutout - 1 No.<br>iii) Supply and fixing 32A Neutral link - 1 No.<br>iv) Supply and fixing 32 A 2 pole switch Disconnector unit (Isolator) complete with handle assembly……….1 No.<br>note -include all Electrical Inspectorate statutory fees

FROM SSB7-F4 DOCTOR COTTAGE METERING PANEL

od124597/2020_2021 : Fabrication, supply, conveyance, installation testing and commissioning of floor mounting, dust and vermin proof, cubicle type MV panel board comprising the following components / devices & complying to IS 8623 (with latest amendments). Fabrication of fully partitioned enclosure for panel assembly using 1.6 mm CRCA sheet as per approved design, alligement and requirement, with front access facility, hinged doors for compartments and earthing the doors using 4 sq mm braided copper conductor. The cubical panel board shall have a compartment of size not less than 300 mm x 600 mm and viewing glass for all outgoing compartment doors of suitable size but not less than 100 mm x 100 mmx 3 mm including providing interconnection between all the switch gears with 6 Sqmm PVC insulated copper conductor cable, Painting with Powder coating after subject to 7 tank process and 2 Nos earth stud etc as required. ( Note: The doors should have facility for sealing by KSEB ).<br>63 A 4 pole switch Disconnector unit (Isolator) complete with handle assembly.<br>i) Providing and fixing 1 No 5 to 30 A three phase kWh meters with LCD display ( KSEB tested )……1 No.<br>ii) Supply and fixing 32A porcelain fuse cutout - 1 No.<br>iii) Supply and fixing 32A Neutral link - 1 No.<br>iv) Supply and fixing 32 A 3 pole switch Disconnector unit (Isolator) complete with handle assembly……….1 No.<br>note -include all Electrical Inspectorate statutory fees

OPEN TRENCH

od107087/2020_2021 : Construction of RCC electrical trench size 60cmX100cm with iron tray. Includind necessary earth work excavtion, Laying position cement concrete :1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 normal size ) 10cm thick, Laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work of base and wall 10cm thick, using cement content as per approved design mix, including pumping of concrete tosote of laying and the cost of centering, shuttering, finishing and steel reinforcement 10mm dia bar used for main bar 20cm c/c and 8mm dia bar used for distributer 25cm c/cR.C.C work including straightening, cutting , bending, placing in position and binding all complete thermo - mechanically Treated bars of grade Fe-500D or more, including admixtures in recommended proportions, 12mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand ), steel work in built up section used for iron tray (25x25x3mm angle iron for main longitudinal section in each side ,10mm square rod for longitudinal intermediate section in 20cm c/c and 25x3mm flat for cross section 30cm c/c) thickness , and including cost of cable tray- installing 50 mm width X 30 mm depth X 1.6 mm size of perforated pre-painted M.S. cable trays with <br>perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.<br>Construction of RCC electrical cable trench size 60cmX100cm with iron tray &50 mm width X 30 mm depth X 1.6 mm cable tray, size cost of One meter ,etc complete .

Quilon Consulting Engineers

TECHNO ENGINEERING CORPORATION

Bidder Name

Quilon Consulting Engineers

National Engineering Company

TECHNO ENGINEERING CORPORATION