Loading
Loading…
Loading…
Tender Value
₹1.6 Cr
EMD Value
₹3.2 L
Closing Date
15 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
MAINTAINCE
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The firm/contractor should submit a valid "B" grade or above electrical Contractor license issued by the Government Electrical Licensing Board in favor of the Firm/contractor (OR) the site Supervisor should possess the necessary valid "B" grade or above electrical Contractor license issued by Government Electrical Licensing. A copy of the valid license shall be submitted with the offer. The offer without a copy of a valid "B" grade or above Electrical Contractors license shall be summarily rejected.
Similar Nature of Work: "Works of wiring / cabling or installation and Commissioning of electrical Items (Other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc (with or without supply of items / equipment's) For 230V, 1 Phase or 415V, 3 Phase System or higher voltages."
47 conditions · 7 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. and corresponding documents shall be submitted by the tenderer as per the composition of the Firm.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA of GCC and shall be valid for a period of 90 days beyond the bid validity period. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
Eligibility criteria :- Eligibility criteria shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Tender Form (First sheet, Second sheet) of The GCC April 2022.
Certificate format (Affadivit) which available as Annexure - V in Mandatory documents. A facility has already created for online submission of Annexure V of GCC in IREPS module, uploading of physically signed Annexure V by tenderer has been discontinued.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
The corresponding documents shall be submitted by the tenderer as per the composition of the Firm: Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. HUF: (i) A copy of a notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet). Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as per Clause No.5 of PART -1 of The GCC, April 2022.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Guntakal Division: 1. Mantralayam Road -Proposed for construction of 12m FOB in MALM station of DEN/North/Gtl jurisdiction - Electrical arrangements., 2. Dhone - Proposed for construction of 12m FOB in DHNE station of Sr.DEN/Central/GTL jurisdiction - Electrical Arrangement., 3. Dharmavaram - Proposed for construction of 12m FOB in DMM station of DEN/West/GTL jurisdiction - Electrical Arrangements, 4. TADIPATRI - Proposed for construction of 12m FOBs in TU station of Sr.DEN/Central/GTL jurisdiction.- Electrical Arrangements., 5. Rajampeta - Proposed for construction of 6m FOBs in RJP station of Sr.DEN/South/GTL jurisdiction- Electrical Arrangements.
GTL-EM-84-2025-26
GTL-EM-84-2025-26
Open
Works - General
6 Months
Anantapur, Andhra Pradesh
₹0
₹3.2 L
15 Apr 2026
24 Mar 2026
1 Apr 2026
189 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,62,26,586.91 | ||
| — | Item Breakup for | details. | — | ||
| Supply and erection of 19mm size rigid conduit pipes of 2mm thickness PVC pipe (ISI mark) concealed in wall with all required accessories conforming to IS 9537.3.1983 including masonry work and labour charges etc (For wiring points and wiring to switch boards) along with accessories ( bends, elbow, deep junction boxes(3 way, 4 Way) etc | — | — | — | 34,500 | |
| — | Item Breakup for | details. | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 1.5 sq. mm FRLS Cu. Conductor | — | — | — | 1,57,500 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of Jumbo Ceiling Rose - with auto safe lock equivalent to model no: GM 8224 of GM make or its equivalent make. | — | — | — | 16,450 | |
| — | Item Breakup for | details. | — | ||
| Supply, running, Connecting of 1 core 4 Sq.mm FRLS, PVC insulated Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendments. | — | — | — | 47,500 | |
| — | Item Breakup for | details. | — | ||
| Supply, running, Connecting of 1 core 6 Sq.mm FRLS, PVC insulated Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendments. | — | — | — | 1,55,000 | |
| — | Item Breakup for | details. | — | ||
| Supply, running, Connecting of 1 core 10 Sq.mm PVC heavy duty insulated multi stranded Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendments. | — | — | — | 5,01,600 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, connecting and commissioning of 6A 3pin/5pin modular plug socket, with 6A modular control switch on existing control board with wiring. | — | — | — | 7,026.5 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 16 Amps 3/5 pin flush type power plug and socket with modular type switch control including all accessories. | — | — | — | 2,167.88 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of surface mounting plastic gang box-12 module of model no:JS 12 008 of GM make or its equivalent with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equavalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 14,073.29 | |
| — | Item Breakup for | details. | — | ||
| Supply and Fixing of Surface mounting plastic gang box-8 module of model no:JS 08 006 of GM make or equivalent with 8 module cover plate (With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 11,668.27 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of surface mounting plastic gang box-18 module of model no:JS 18 010 of GM make or its equivalent make with 18 module cover plate (With support frame) of model no:PK SB 18 010 - CASABLANCA of GM make or equavalant comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 11,810.56 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 16A combined unit with plastic surface box with 3M Cover Plate + 16A MCB + 16A Raised Socket + 16A plug top of model no: AA 3 173 of GM make or equivalent make. | — | — | — | 45,810 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of High volume low speed (HVLS) fan , fan dia 8 feet, Max. Airflow-136000CFM, Blades-05 Nos , extruded Aluminium 6063T, Motor type-PMSM, 200 Watt, Suitable for single phase AC supply as per RDSO specification latest. | — | — | — | 7,13,753.2 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of BLDC star 200 mm 20W 1600 R P M Exhaust fans including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 4,116 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of BLDC Air circulators 400 mm sweep with 1500 RPM 32W Equivalent to EFFICIO + model of Atomberg Make including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 3,36,700 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 100W LED Highbay light with PDC housing suitable for celing (Surface/Suspended) mounting, complete with necessary mounting accessories, clamps and hardware etc. as per attached railway specification. | — | — | — | 8,25,418.1 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 40W 4 feet LED tube light, with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties for extenstion wires etc for fixing) as per attached railway specification. The cost includes the cost of clamp for erection in COP. | — | — | — | 78,757.25 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of of LED flood light fittings 60 W with all connected acessories as per attached railway specification . | — | — | — | 2,78,520 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 120W LED Flood light fitting with all connected materials complete as per attached railway specification. | — | — | — | 3,82,718.11 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 6-10 sq.mm size junction box equivalent to model no: DK 1010 G of Hensel make | — | — | — | 1,51,620 | |
| — | Item Breakup for | details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 1204 of Hensel make or equivalent make with necessary terminals suitable for cables upto 150Sq mm and all necessary accessories complete. | — | — | — | 1,20,600 | |
| — | Item Breakup for | details. | — | ||
| Supply, laying and connecting of 2 core 150 sq.mm XLPE insulated underground armoured aluminium cable as per IS 7098(Part 1)1988 with its latest amendments. | — | — | — | 3,83,240 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of HDPE pipe of 63 mm of PE-80 grade in PN-4 size as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 6,38,000 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 16 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 6,41,160 | |
| — | Item Breakup for | details. | — | ||
| Supply, running and connecting of 4 core 16 sq.mm PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694 : 2010 with its latest amendments. | — | — | — | 11,25,432 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of LTUG 4 core 25 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1) 1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 1,33,562 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 50 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 10,34,040 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 4 core 95 sq.mm XLPE insulated underground armoured aluminium cable as per IS 7098(Part 1)1988 with latest amendments with necessary lugs and terminations complete. | — | — | — | 9,78,956 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and termination of 1.1 KV Grade 4 core 35 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 or latest amendment with necessary lugs and terminations complete. | — | — | — | 6,00,960 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of HDPE pipe of 50 mm outer dia of PE-100,PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 2,12,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of HDPE pipe of 40 mm of PE 63 grade, PN8 as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 3,04,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and laying of 8 SWG GI wire with 40GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with armourd cable for earth continuity. | — | — | — | 1,08,600 | |
| — | Item Breakup for | details. | — | ||
| Supply, laying and connecting of 25x3mm GI Flat with 40GSM Zinc coated, conforming to IS:280-2006 or latest, it is to be laid & connected from equipment to earth electrode for continuity. | — | — | — | 14,850 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench in all types soils of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013 The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 2,03,067 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench of size 400mm x 1 mtr deep track X-ing/Road X-ing and making good of the same to its original form and shape completely including all connected materials and works to the satisfaction of Railways site Engineer and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013.. .The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 1,14,879 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench in rocky soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013 | — | — | — | 2,04,400 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of Power cable route indicators with all connected materials and works as per Drawing No.DEE/CN/BZA/2001/23. | — | — | — | 9,100 | |
| — | Item Breakup for | details. | — | ||
| HT/LT Cable laying by horizontal boring below track etc by pushing method-Drilling for horizontal bore below track by pushing method by suitable means for laying of GI pipes/ HDPE pipe etc of various sizes, the bore shall be of 200 mm dia & shall be done at a depth of1200 mm from ground level, it also includes insertion of pipe. | — | — | — | 2,15,700 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench in cement concrete bed flooring by using power drill to a depth of 1.0 Mtr and a width of 0.3mtr. After laying the pipe and refilling the trench with excavated earth and undertaking cement concrete bed flooring to its original shape as was prevailing earlier to the satisfaction of Railways site Engineer and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 8,96,000 | |
| — | Item Breakup for | details. | — | ||
| Supply, Erection and connecting of SMC Distribution Box of size 400 x 300 x 190mm of Model No: GSJB 4030 of sintex make or equivalent make with clip on type terminal blocks suitable for 70 Sq.mm size cable. | — | — | — | 17,691 | |
| — | Item Breakup for | details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 7004 of Hensel make or equivalent make conforming to IS:13573/92,IEC 60947-3 with necessary terminals suitable for cables upto 70Sq mm and all necessary accessories complete. | — | — | — | 88,780 | |
| — | Item Breakup for | details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 9255 of Hensel make or equivalent make conforming to IS:13573/92,IEC 60947-3 with necessary terminals suitable for cables upto 25 Sq mm and all necessary accessories complete. | — | — | — | 3,540 | |
| — | Item Breakup for | details. | — | ||
| Design, Fabrication, supply and erection of 300mm width, 62.5 mm depth, 2mm thick sizes perforated G.I tray (cable Tray) including Horizontal stiffener to avoid sag of tray and vertical bends reducers, tees, cross members and other accessories including fixing with suitable G.I. Clamps / G.I. angles / G.I. flats and with necessary connected hardware etc | — | — | — | 6,89,350 | |
| — | Item Breakup for | details. | — | ||
| Supply and Fixing of 4 feet 20W LED tube light with Radar motion sensor. The fittings have to be fixed on the wall / Ceiling / FOB with suitable clamps. CCT 5700 K -6200 K, Luminious flux : 1400-1600 Lpm , Input Voltage : 100-240 V , 50 Hz Power factor > 0.9, SMD LED 3014:117 Pcs , BEAM angle :180, CRI>71. Ingrees protection: IP20, base : Aluminium alloy housing cover : Forged , PVC lamp holder : PC /ABS , Action distance : phase 3 to 6 m. Suitable Box type fittings for LED lamps has to be supplied by the contractor. Make : Nano, Bright solar, ECP lighting solutions, Procorp earntech pvt ltd, solar innvation & system. LED make Nichia, CREE, Osram, Seoulsemi, samsung, Brgelux. | — | — | — | 1,58,100 | |
| — | Item Breakup for | details. | — | ||
| Dismantlement of Light fittings as specified by Site engineer with all accessories complete and same should be handed over to concerned site Engineer at his stores. | — | — | — | 8,000 | |
| — | Item Breakup for | details. | — | ||
| Removing/dismantling of wooden switch boards, DB's along with connections and connected works complete as per instruction of site in charge. | — | — | — | 1,125 | |
| — | Item Breakup for | details. | — | ||
| Removing/dismantling of old and damaged wiring concealed/casing and caping type from all connections etc as per instructions of site in charge. | — | — | — | 5,000 | |
| — | Item Breakup for | details. | — | ||
| "Dismantling of Poles (tubular) / Rail Poles/ Octogonal. " | — | — | — | 22,778 | |
| — | Item Breakup for | details. | — | ||
| "Dismantling of AC Ceiling Fans. " | — | — | — | 1,400 | |
| — | Item Breakup for | details. | — | ||
| Dismantling of Metal Junction Boxes. | — | — | — | 2,023 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing o f LED street light fittings of 40 W with suitable driver with all connected materials (The supply includes accessories such as clamps, ties for extenstion wires etc for fixing) conforming to IEC 60598-1 as per attached railway specification. | — | — | — | 63,450 | |
| — | Item Breakup for | details. | — | ||
| Supply, Transportaion, Erection & commissioning of 5mtr long hot dip galvanised Octagonal pole (IS 875) with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HT sheet (S 355 JO steel plate for shaft), along with base plate IS 2062 of size 200x200x12mm, M16x600 long J type EN8 grade foundation bolts, 1000mm long single/ Double arm bracket Including the Supply of Suitable bolts with Bakelite Sheet with MCB ( for mounting inside the base compartment of pole ) including Erection & commissioning of 5 mtr. octagonal pole including RCC concrete foundation & plinth in hard soil including excavation of soil, tamping of concrete, grounting and supply of other required materials and accessories complete. | — | — | — | 73,494.4 | |
| — | Item Breakup for | details. | — | ||
| Service connection to the fitting from the junction box of 5 mtrs Octogonal pole by means of PVC insulated copper conductor of 3 core 1.5 Sq mm with necessary lugs at the juction box and necessary termination at the luminaire complete. | — | — | — | 1,460 | |
| — | Item Breakup for | details. | — | ||
| Supply fixing connecting and comissioning of 12 way SPN Distribution board 12 module of model no. 507612 with metal door of legrand make or equivalent make comprising of the following switchgear of make with all connecting accessories complete. | — | — | — | 1,93,200 | |
| — | Item Breakup for | details. | — | ||
| "Supply and erection of DPX3 8+18 of 6 way DB of legrand cat no.5077 36 with metal door with IP 54 with provision for incommer of MCB, bus bar of capacity 100A, With 2 Neutral bar, 2 Earthbar and Cable ties for Cable management and outgoing for 18 Module with busbar din and neutral link with all necessary accessories complete." | — | — | — | 4,13,191.8 | |
| — | Item Breakup for | details. | — | ||
| "Supply and erection of DPX3 8+36 of 12 way DB of legrand cat no.5077 38 with metal door with IP 54 with provision for incommer of MCB, bus bar of capacity 100A With 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, and outgoing for 18 Module with busbar din and neutral link with all necessary accessories complete." | — | — | — | 69,613.6 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of SPN DB's, 8 way 8 module confirming to IEC:61439 with its latest amendment, with metal door model no.5076 11 of legrand make or it's equivalent. | — | — | — | 4,312 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing connecting and commissioning of 18 way SPN Distribution board 12 module of model no. 5076 04 with metal door of legrand make or equivalent with all connecting accessories complete. | — | — | — | 2,783.2 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of DPX3 160+18 of 6 way DB of legrand cat no.5077 46 with metal door with provision for incommer of MCCB upto 160 Amps , bus bar of capacity 250A and outgoing for 18 Module with busbar din and neutral link with all necessary accessories complete. | — | — | — | 28,832 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of DPX3 160+18 of 8 way DB of legrand cat no.5077 47 with metal door with provision for incommer of MCCB upto 160 Amps, bus bar of capacity 250A and outging for 18 Module with busbar din and neutral link with all necessary accessories complete. | — | — | — | 32,818.8 | |
| — | Item Breakup for | details. | — | ||
| Supply and installation of DPX3 160 thermal magnetic based release; Icu = 36K A; 100A 4 Pole MCCB conform to IEC 60947-2 with its latest amendments, of model no. 4200 95 of Legrand make with extended ROM, spreader links (2 sets). | — | — | — | 2,03,500 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 63A, C-curve 3P MCBs with 10KA breaking capacity with all necessary accessories complete. | — | — | — | 66,528 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 32A, C-curve 3P MCBs with 10KA breaking capacity with all necessary accessories complete. | — | — | — | 1,79,172 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of B curve DP MCBs of 32 A with all connected accessories as per IEC 60898-1 with its latest amendments. | — | — | — | 49,700 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of B curve 16A DP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments with all connected accessories. | — | — | — | 43,731.6 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of B curve 6A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 36,800 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of B curve 10A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 18,400 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of B curve 16 SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 11,500 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of B curve 20A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 2,300 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of B curve 32 SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 2,300 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of RCCB 4P 40A 30mA RCCB and metal enclosure conforming to IS 12640-1 & IEC 61008-1 with its latest amendments, as advised by the site supervisor with all necessary accessories complete. | — | — | — | 3,567.6 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing and connecting of 2pole 2 module 32A Lexic RCBOs conforming to IS 12640-2(2008) with its latest amendments as advised by the site supervisor with all necessary accessories complete. | — | — | — | 6,995.8 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing and connecting of 2pole 2 module 16A/25A Lexic RCBOs conforming to IS 12640-2(2008) with its latest amendments as advised by the site supervisor with all necessary accessories complete. | — | — | — | 6,795.6 | |
| — | Item Breakup for | details. | — | ||
| Supply, Erection, Testing and Commissioning of RCCB 4P 63A 100mA Sensitivity conforming to o IS 12640 (Part 1) : 2024 with its latest amendments, with 10 kA short circuit withstand capacity with all necessary accessories complete as advised by the site supervisor. | — | — | — | 87,167.7 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of RCCB 2P 25A 30mA with metal enclosure. RCCB conforming to IS 12640 (Part 1) : 2024 with its latest amendments, with 10 kA short circuit withstand capacity as advised by the site supervisor with all necessary accessories complete. | — | — | — | 1,16,912.7 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of out door type 4 way terminal junction box hinged type, size (12cmx30cmx30cm) , combining SMS, pultruded FRP section, advanced poly metric materials and MS members, 100% maintenance, rust proof, shock proof and highly weatherable and extremely durable and provided with 4 no.s of terminals with 50A capacity mounted on SMS/Hylam sheet of 10 mm thickness, din rail for MCB fixing including provision for locking arrangements knockout cable entries etc., with all other connected materials and works. | — | — | — | 7,612 | |
| — | Item Breakup for | details. | — | ||
| supply and fixing of 3 Pole AC Power Contactor 25 Amp 1 NO 1NC AC 3 PH 415 V Coil Voltage 110 V AC Aux. | — | — | — | 10,681 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of Digital time switch with astronomical function of model no: 4126 57 of legrand make with 2 output of 16 A - 250 VA Astronomical function 2x28 programmes 2 Channel. | — | — | — | 1,15,515.4 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing and testing of Mobile charging Distribution (Set of 6 Amps 1 way SP switch) board set made with CRCA sheet steel with power coated including fixing charges Size: 260 mm X 36 0mm X 150 mm. Specification-1) Incomer-6A SP MCB-01 Nos, 2) Brass Neutral Link 9x6 mm & aluminum earth link size 8x6 mm, 3)Socket wiring with 1.5 sq.mm FRLS PVC Wires, 4) 6A 3pin sockets-04 Nos, 5) 6A Iway switch-06 Nos, 6) 6A 1 module USB Chargers-02 Nos. | — | — | — | 3,95,762.4 | |
| — | Item Breakup for | details. | — | ||
| Excavation of earth for one pit in any soil andrefilling as per Drg.NO. RE/33/P702/ MOD.F | — | — | — | 15,807.84 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of Earth electrode as per the RDSO Drg No. ETI/OHE/P/ 7021 (REV.A) or if any latest | — | — | — | 81,007.68 | |
| — | Item Breakup for | details. | — | ||
| Drilling of 26 Nos of 12 mm dia holes on earth electrode. | — | — | — | 7,752 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of Charcoal | — | — | — | 24,148.8 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of Salt | — | — | — | 16,699.2 | |
| — | Item Breakup for | details. | — | ||
| Provision of RCC earth pit hollow box of size 300 mm x 300mmx300mm with 50 mm wall thickness as per Drg. no. SDO/RDSO/E&B/001 by using M20 Grade pre-cast RCC. Supply and Erection of RCC pre-cast slabs with hook to cover Earth pits of dimensions as shown in IRSEM drg no 19-D6. All the required materials for this work i.e. stones, cement, iron and sand etc. are to be supplied by contractor.). Inspection by Consignee. | — | — | — | 41,753.28 | |
| — | Item Breakup for | details. | — | ||
| Transportation charges including loading & unloading of earthing arrangements system material to site / location. | — | — | — | 11,930.4 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, testing and comissioning of Maintenance free earthing with all necessary accessories complete according to IS 3043-1987 and as per RDSO spec No: rdso/spec/ps/0109(rev.0)-2008 Amendment'1'. | — | — | — | 3,57,825 | |
| — | Item Breakup for | details. | — | ||
| Supply and run of 2 nos, 2.5 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 1.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS 694 (2010) with latest amendements. | — | — | — | 1,93,800 | |
| — | Item Breakup for | details. | — | ||
| Supply and run of 2 nos, 4.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS 694 (2010) with latest amendements. | — | — | — | 1,54,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and running of 32 mm dia, Ivory coloured PVC conduit of wall thickness not less than 2 mm with junction boxes, bends and all accessories etc as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter. | — | — | — | 5,927 | |
| — | Item Breakup for | details. | — | ||
| Supply and Running of 25 mm dia, Ivory coloured PVC conduit ( ISI marked) of wall thickness not less than 2 mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter. | — | — | — | 2,14,016 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 80mm dia GI Pipe 'B' class with threaded at both ends with coupling/flanges complete confirming to IS: 1239(Part-I)2004 with its latest amendments. | — | — | — | 83,260.8 | |
| — | Item Breakup for | details. | — | ||
| Design, manufacture, display and installation of wall /hanging / floor mounting type LED illuminated sign / direction boards in Full Elliptical(FE), Half Elliptical (HE), SemiElliptical (SE), parabolic /Triangular shape. All the specifications are as per Standard Signages at Stations On Indian Railways- April-2023 or its latest amendment. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage. The rate includes all the components complete. | — | — | — | 35,836.65 | |
| — | Item Breakup for | details. | — | ||
| Design, manufacture, display and installation of wall /hanging / floor mounting type LED illuminated sign / direction boards in fl a t shape. All the specifications are as per Standard Signages at Stations On Indian Railways- April-2023 or its latest amendment. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage. The rate includes all the components complete. | — | — | — | 21,682.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ListofLikelySuppliers_1.pdf
ATTACHMENT
Master Tender Document
ATTACHMENT
SCOPEOFWORKFORWiring.pdf
ATTACHMENT
CEGETechnicalCircular_compressed.pdf
ATTACHMENT
RITESInspectionLr..pdf
ATTACHMENT
Technicalspecifications-43-68.pdf
ATTACHMENT
MasterTenderdocumentGTL-EM-84-2025-26.pdf
ATTACHMENT
GCC_April-2022WithCorrectionSlips..pdf
ATTACHMENT
EarthingSpec-MFEOther.pdf
ATTACHMENT
RlyBd-JPO-DiggingofCables2013-Re-Circulatedin2022-LATEST.pdf
ATTACHMENT
Signages_Standard_Sizes-1-42.pdf
ATTACHMENT
Signages_Standard_Sizes-43-75.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .