Loading
Loading…
Loading…
Tender Value
₹65.0 L
EMD Value
₹1.3 L
Closing Date
13 Apr 2026, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
SR.DEN1
15 conditions · 3 needing a document upload
Financial Eligibility Criteria (Clause 10.2 of part-I GCC-2022):- The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Important Instruction: "The balance sheet and all other financial documents attested/certified by the Chartered Accountants (CA) to substantiate fulfillment of Financial Eligibility Criteria should be with UDIN, failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference" Vide letter no. CE/Works/ECR/HJP's letter No.ECR-HQ0ENGG (CONT)/ 0009/2025 dtd. 18.11.2025 (ii) Gazette Notification No.1-CA (7)/192/2019, dated 02.08.2019 of the Institute of Chartered Accountants of India, published in the Gazette of India).
Technical Eligibility Criteria (Clause 10.1 of GCC-2022): (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2) In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b)(3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Note: for subletting of work costing up to Rs.50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Item 10.1: (Clause 10.1 of part-I GCC-2022): Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Similar Nature of Work:- Any Civil Engineering Works.
10 conditions · 7 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender.
After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association/Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate.
(a) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. as the case may be. Following documents shall be submitted by the tenderer: - (b) Following documents shall be submitted by the tendeerer in case of Sole Proprietorship Firm; (i) An undertaking that he is not blacklisted or debarred by Railway or any othr Ministry/ Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was /is a partner/member. Concealment /wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022. (c) Following documents shall be submitted by the tenderer in case of HUF; (i) A copy of notarized affidavit on stamp paper declaring that he who is submitting the tender on behalf of HUF is in the position of Karta of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) An undertaking that the HUF is not blacklisted or debarred by Railway or any other Ministry /Department f Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member f the partnership firm or JV in which HUF was / is a partner/member. Concealment/wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022. (d) Following documents shall be submitted by the tenderer in case of Company registered under Companies Act 2013; (i) The copies of MOA(Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate o Incorporation (iii) A copy of Authorization /power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sing the tender on behalf of the company and create liability against the company. (iv) An undertaking that the Company is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which the Company was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022. Society/Trust. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022.
(e) Following documents shall be submitted by the tenderer in case of LLP (Limited Liability Partnership): If the tender is submitted on behalf of a LLP registered under LLP Act-2008, the tenderer shall submit along with the tender: (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking that the LLP is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of JV in which the LLP was / is a member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 6 2 o f t h e General Conditions o f Contract. ( v ) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC2022. (f) Following documents shall be submitted by the tenderer in case of Partnership Firm: The tenderer shall clearly specify that the tender is submitted on behalf of a partnership firm. (i) A notarized copy of partnership deed. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022 and clause 18 of GCC-2022. (g) Following documents shall be submitted by the tenderer in case of Registered Society & Registered Trust (i) A copy of the Certificate of Registration (ii) A copy of Deed of Formation (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022.
An undertaking that the Proprietary firm /Partnership firm/Company /Joint venture (JV) Registered society /Registered Trust /HUF/LLP ect. He is not blacklisted or debarred by Railway or any other Ministry/Department of Gov. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of JV in which the LLP was / is a member .Concealment/ wrong information in determination under Clause 62 of the General Conditions of Contract. For detail refer para 5 & 5.1 as above and GCC-2022 .
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
In case, submission of Bid Security in the form of Bank Guarantee, the original Bank Guarantee should be delivered to COS/Bill&Tender/Dhanbad (Official Nominated) before closing date for submission of bids. (i.e. excluding the last date of submission of bids) as per Para 3 (ii) of Sl. No.13 (Bid Security) of the tender document.
A copy of Documents against eligibility criteria must be submitted along with the E-tender. No any documents against the same will be entertained in the office of Divisional Railway Manager, Dhanbad or anywhere else at any time. Tender will be decided purely on the basis of documents available/attached with the E-tender irrespective of whether tenderer is working contractor or new. However Railway may ask clarification with respect to document available/attached with the E-tender, if required.
Repairs to staff quarters in the section at BRWD, DTO & GHD of SSE Works BRWD under ADEN/DTO.
381-DHN-2025-26~ECR
381-DHN-2025-26
Open
Works - General
9 Months
Dhanbad, Jharkhand
₹0
₹1.3 L
13 Apr 2026
20 Mar 2026
30 Mar 2026
62 items across 2 schedules · ₹3,13,775 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Cost of carriage including loading, unloading & stacking for first 50 metres | cum | 20 | 234.05 | 4,681 |
| 2 | All kinds of soil | cum | 230 | 205.45 | 47,253.5 |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 23 | 2,161.2 | 49,707.6 |
| 4 | Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in- charge. | cum | 150 | 76.7 | 11,505 |
| 5 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 32 | 7,365.15 | 2,35,684.8 |
| 6 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 27 | 6,833.4 | 1,84,501.8 |
| 7 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 16.5 | 8,364.2 | 1,38,009.3 |
| 8 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 22 | 10,185.05 | 2,24,071.1 |
| 9 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ). | cum | 17 | 13,581.85 | 2,30,891.45 |
| 10 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 56 | 6,882 | 3,85,392 |
| 11 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 81 | 8,288.35 | 6,71,356.35 |
| 12 | Cement mortar 1:3 (1 cement : 3 coarse sand) | Sqm | 90 | 862.9 | 77,661 |
| 13 | Cement mortar 1:3 (1 cement :3 coarse sand) | Sqm | 450 | 1,043.1 | 4,69,395 |
| 14 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 310 | 1,063.45 | 3,29,669.5 |
| 15 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 35 | 1,881.95 | 65,868.25 |
| 16 | 250x16 mm | Each | 114 | 234.9 | 26,778.6 |
| 17 | 100 mm | Each | 114 | 53.25 | 6,070.5 |
| 18 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in- Charge. | Metre | 202 | 408.25 | 82,466.5 |
| 19 | 30 mm thick plain PVC door shutters | Sqm | 60 | 2,455.1 | 1,47,306 |
| 20 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 1770 | 111.95 | 1,98,151.5 |
| 21 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with local sand, with common burnt clay non modular bricks. | Sqm | 155 | 733.3 | 1,13,661.5 |
| 22 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 925 | 545 | 5,04,125 |
| 23 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 125 | 935.6 | 1,16,950 |
| 24 | 110 mm diameter | Metre | 180 | 319.75 | 57,555 |
| 25 | 110x110x110 mm | Each | 45 | 190.75 | 8,583.75 |
| 26 | 110 mm bend | Each | 110 | 132 | 14,520 |
| 27 | 110 mm | Each | 110 | 309.5 | 34,045 |
| 28 | 1:6 (1 cement: 6 fine sand) | Sqm | 1825 | 282 | 5,14,650 |
| 29 | 1:6 (1 cement: 6 fine sand) | Sqm | 300 | 324.3 | 97,290 |
| 30 | 1:3 (1 cement: 3 fine sand) | Sqm | 200 | 421.5 | 84,300 |
| 31 | 1:3 (1 cement : 3 fine sand) | Sqm | 440 | 253.05 | 1,11,342 |
| 32 | Neat cement punning. | Sqm | 250 | 67.8 | 16,950 |
| 33 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 946 | 97.6 | 92,329.6 |
| 34 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Sqm | 1000 | 20.85 | 20,850 |
| 35 | One or more coats on old work | Sqm | 1300 | 86.55 | 1,12,515 |
| 36 | One or more coats on old work | Sqm | 9000 | 50.6 | 4,55,400 |
| 37 | Old work (one or more coats @ 2.20 kg/10 sqm) complete. | Sqm | 5800 | 63.25 | 3,66,850 |
| 38 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) | Sqm | 38 | 941.95 | 35,794.1 |
| 39 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. | Sqm | 150 | 285 | 42,750 |
| 40 | Orissa pattern W.C Pan of size 580x440 mm | Each | 26 | 3,850.65 | 1,00,116.9 |
| 41 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. | Sqm | 1525 | 2.85 | 4,346.25 |
| 42 | Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). | Sqm | 2000 | 454.8 | 9,09,600 |
| 43 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 12 | 2,007.1 | 24,085.2 |
| 44 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 5 | 2,928.1 | 14,640.5 |
| 45 | Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. | cum | 7 | 2,619.45 | 18,336.15 |
| 46 | Of area 3 sq. metres and below | Each | 64 | 302.7 | 19,372.8 |
| 47 | For thickness of tiles above 25 mm and up to 40 mm | Sqm | 400 | 93.4 | 37,360 |
| 48 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 310 | 45.05 | 13,965.5 |
| 49 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 110 | 219.35 | 24,128.5 |
| 50 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | 40 | 1,913.75 | 76,550 |
| 51 | 510x1040 mm bowl depth 250 mm | Each | 40 | 6,008.45 | 2,40,338 |
| 52 | 32 mm dia | Each | 80 | 104.35 | 8,348 |
| 53 | PN - 16 Pipe, 20mm OD (SDR-7.4) | Metre | 160 | 213.9 | 34,224 |
| 54 | PN - 16 Pipe, 25 mm OD (SDR-7.4) | Metre | 240 | 268.2 | 64,368 |
| 55 | PPR Union 20mm | Each | 50 | 295.75 | 14,787.5 |
| 56 | PPR Union 25mm | Each | 80 | 362.65 | 29,012 |
| 57 | 15 mm nominal dia Pipes | Metre | 40 | 255.9 | 10,236 |
| 58 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 10000 | 9.7 | 97,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .