SPECIAL REPAIR TO BLDG NO T 35D OF OFFICE COMPLEX OF HQ 3 CORPS ARTY BDE AND REVENUE WORK AT MASIMPUR UNDER GE SILCHAR

B & R Division Items

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposing off complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, apron etc including cement mortar bedding (but not backing) and disposing off complete all as specified and as directed.

Dismantling mild steel work or wrought iron of any description and in any position complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding, etc.including all necessary staging / scaffolding, etc. as required complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets all as specified and as directed.

Dismantling wooden boarding (eaves board, rafter etc) of any description fixed in any position with nails.

Dismantling of timber scantling 40 Sqcm and over in section, in any position in framed work complete all as specified and directed.

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutters) from the frame n.exc 1.5 Sqm each all as directed

Taking down Chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frame) complete all as specified.

Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Surface dressing n exc 15 cm deep and getting out in soft / lose soil complete all as specified

Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of column, wall etc, not exc 10 sqm on plan and getting out in soft/loose soil etc complete all as specified and directed.

Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm all as specified.

Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point all as specified.

Earth filling under floor incl spreading ,levelling & well ramming including watering as required n exc . 25 cm thick complete all as specified and directed. (Note :- Earth obtained from relevant execavation items above mention is reused )

M&L for hardcore of broken stone gauge n exc 63mm, deposited, spread and leveled in layer n.exc 15cm thick, watered and rolled / rammed to a true surface all as specified and directed .

M&L for PCC (1:4:8), D2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete.

Material and labour for cement concrete 75 mm thick PCC type C2 1:3:6 (40 mm graded aggregate) as in path , plinth protection,finished even and smooth without using extra cement complete all as described.

M&L for providing 75 mm thick cement concrete (1:3:6) type C-2 using (40mm graded stone aggregate) as in Sub base of floor rough surface complete all as specified.

M&L for PCC (1:3:6) type C2 using 40 mm graded aggregate bed to drain pipe for 110mm bore including packing under and hunching against side of pipe after they are laid and tested.

M&L for providing 25 mm thick cement concrete (1:2:4) type B-1 using (20mm graded stone aggregate) as in flooring to receive the topping layers complete all as specified.

Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed.

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete all as specified and directed.

Use and waste Formwork to sides and soffits of floor or roof beam, beam hunching, girder, lintels, cantilever, shelves including supports, etc for rough finished flat surfaces of concrete complete all as specified and as directed.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, landings and similar work, not exceeding 200mm thick( Horizontal or Sloping ), for rough finished flat surface of concrete all as specified and as directed.

Use and waste Formwork to edges of concrete flats,slabs etc incl fair finished surfaces exe 5cm but n.exe 10cm wide all as specified nd directed.

Material and labour for providing Reinforced Cement Concrete 1:1.5:3 Nominal mix using 20mm aggregate as in beam, cantilever, lintels over 1.5mtr comlpete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete M-25 (Design Mix) using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete M-25 (Design Mix) using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete M-25 (Design Mix) using 20mm aggregate as in slab supported on walls , beams, and column in floors, roof, landing, balconies, canopies, deck slab and in shelves and like etc comlpete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete M-25 (Design Mix) using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m complete all as specified and directed.

Material and labour for 10mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Material and labour for 6mm to 8mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Material and labour for Mild Steel TMT Bar 6mm dia and over up to 10 mm dia as in stirrups, spacers and binders as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed

M&L Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:6 Complete all as specified and as directed.

M & L for half brick work in cement mortar (1:4) straight or curved on plan to any radius with locally available Subclass ‘B’ old size best quality bricks all as specified.

M&L for 5 mm thick rendering in cement mortar (1:3) of cieling surfaces finished even and smooth complete all as specified.

M&L for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair all as specified.

M&L for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and Smooth(with out using extra cement) fair all as specified.

M&L rendering 15 mm thick cement plaster in two layer Each of 10+5 mm thick on fair faces of brick wall or concrete surfaces in CM (1:4) & water proofing compound mixed with second layer @ 3% finished fair and even. ( Note -W.P.C. shall be measured and paid separetly).

Material and labour for Rendering/plastering, 15 mm thick (10mm + 5mm) in two layers in cement mortar (1:4) on any face of brick walls or concrete surfaces, using WPC, surfaces finished finished even and smooth without using extra cement complete all as specified. (WPC measured separately).

Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed.

Material and labour light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm and not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified and directed.

Material and labour light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm and not exceeding 0.36 sqm as in skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 10mm thick backing coat of rendering with CM 1:4 as specified.

M&L Non Skid ceramic tiles colour 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layers in cement mortar 1:6 as specified .

M&L Non-skid colour ceramic tiles 7 to 8 mm thick coloured ( square/ rectangular) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm including screed bed or bedding layers of 15 mm thick cement mortar (1:6) as in floors set and jointed in pointed in white or colour cement complete all as specified and directed .

M&L of Glazed ceramic coloured tiles in vertical surface size 350 x 250 x 7mm/450mm x 350mm x & ( 6mm to 7mm )mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick screed bed or backing coat in cement mortar 1:4 laying of skirting/dado on walls all as specified and directed.

M&L for 18-20 mm thick granite (any type) work (table rounded and polished) in steps, jambs pillars, windows-cills cooking plateforms, urinal partitions, stand for WHB and like over 15 mm thick backing coat of cement mortar (1:4) incl pointing in white cement with marble dust (1:2) with admixture of pigment to match with shade of granite complete all as specified.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply and fix Framed work such as grills, gratings, etc. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Supply and fix Steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-210 complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinay and counter sunk) forming holes, without any attachment of Fe 410W (Gde-E -250) Quality 'B' complete all as specified and directed by Engr-in-Charge.

M & L for second class harwood in scantlings timber in clear sawn to framed work scantling 40sqcm and over in section in any position complete all as specified and directed.

Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.0mm and fixed with stainless steel wire staples complete all as specified.

S&F 4.00 mm thick tinted sheet glass pin head type and glazing with oil putting square nexc 0.5 sqm in each pane complete all as specified.

S&F 4.80 mm thick tinted sheet glass pin head type and glazing with oil putting square exc 0.5 sqm in each pane complete all as specified.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for Door shutters with frame, Three track sliding windows ( 2 x glazed & 1 x Gauzed shutter), ventilator & cup board including necessary jointing cleats, screws etc & fixed complete all as specified & directed.

S & F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2020).

S & F Factory made wire gauzed PVC moulded door shutter 30 mm thick (style) panel will be of wire gauzed i.e. panel will be of wire gauze in lieu of single side prelaminated sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tightened firmly consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2020) complete all as specified.

S & F factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for styleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification and as per drawing.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified.

S&F 3 mm thick sheet glass frosted ordinary quality and glazing with oil putting square n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F 100mm long stainless steel butt hinges, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed.

Supply and fix 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

M & L for 12 mm thick Prelaminated particle board,Exterior grade, prelaminated on both side with decorative choice lamination & other side balancing white lamination complete all as specified and directed.

S&F rubber beading for securing glass of suitable size complete all as specified and directed.

S&F door brush in verticle style for air insulation complete all as specified and directed.

S&F PVC roller in Aluminium body of suitable size for sliding shutters complete all as specified and directed.

S&F side locks of Aluminium body, suitable size for sliding shutters complete all as specified and directed.

S&F Mortice lock, vertical type size 100mm, of brass 04 levers vertical type complete all as specified and directed.

Supply and fix 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.

Supply and fix 125 mm long aluminium handles, fabricated type, anodised fixed with screws complete all as specified and directed.

S&F 100 mm long butt hinges ,extruded aluminium alloy with Stainless steel hinges pin, anodised (ISI marked) fixed with stainless steel screw.

S&F 150 mm long aluminum anodised barrel tower bolts of extruded section .

S&F 125mm long aluminum anodised handles of extruded section .

S&F Door closer hydraulically regulated, designation No. 1 universal type of Aluminium (extruded section body) suitable for door shutters up to 70omm in width and of weight not more 35Kg complete all as specified.

S&F 25 mm dia and 1mm thick MS chromium plated curtain rods including fancy type side brackets end knobs and fixed with PVC rawl plugs & steel screws as in repairs etc all as specified and directed .

Supply and fix in repair Vitreous China urinals, bowl type urinal flat back large size of 37.5cm x 39cm x 59cm white (Hindware CAT No. -60002 or equivalent), with urinal spreader grating and union for discharge pipe (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F for vitreous china wash basin, white, counter top, size 560 mm x 461 mm ovel shape including waste coupling but excluding taps, waste chain and plug and porcelain stopper complete all as specified and directed. Make: Hindware Cat Part No 10017 or equivalent as per make approved list.

Supply and fix vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified

Supply and fix vitreous china wash down water closet pan (pedestal pattern) white including white colour plastic seat cover and white flushing cistern with fittings complete all as specified & as directed. Make: Jaquar ARS-WHT-39751S250UFSMZ or equivalent as per make approved list

Supply and fix, vitreous china Squatting pan, 'Orissa' pattern, Size 580 X 440mm ,with integral foot rests (excluding flushing ciestern and flush pipe) complete all as specified & as directed .

S&F PVC valve less syphonic action type of capacity 10 ltrs , low level flushing cistern, white with inlet, ball valve float and handle including brackets complete.

S & F in repairs PVC valveless,syphonic action type,low level flushing cistren 10 ltr capacity ISI Marked incl all acessories and 32mm dia PVC flush / discharge pipe incl float valve, inlet complete all as specified.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 m complete all as specified.

S&F in repairs 15mm bore bib taps fancy type, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed. Make: Jaquar CQT-23041 or equivalent as per make approved list

Supply and fix 15mm bore stop valves/angle valve of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with wall flange complete all as specified. Make: Jaquar CQT-23053 or equivalent as per make approved list

S&F 15 mm bore, Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. Make : Jaquar CQT-23021 or equivalent as per make approved list.

Supply and fix health faucet ABS body mild steel chromium plated suitable for 15mm dia pipe with 1.20 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified. Make: Jaquar ALD-573 or equivalent

Supply and fix in repair 6.0mm thick swivel mirror size as required complete all as specified. Make: Modiguard, saint gobain or equivalent as per make approved list

Supply and fix tubular Towel rail, 20mm dia brass chromium plated, 'D' type 450mm long with fancy type on both sides and fixed with steel screws and wooden/rawl plugs complete all as specified. Make: Jaquar CAN-1111SM or equivalent

S&F in repairs 12mm thick corner glass self with 250mm radius between flanges of brass chromium plated D clamps including bracket complete all as specified and directed. Make: Jaquar ACN-1173 or equivalent as per make approved list

Supply and fix 15 mm bore bib taps,chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified.

Supply and fix, 15 mm bore stop/angle valve, cast copper alloy, ,screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified.

Supply and fix 15 mm bore pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe .

S &F Soap Dish chromium Plated complete all as specified& as directed.

S&F chromiuim plated Swivel shower roses with arm, 125 size including fxing to steel pipe or union

S&F 32 mm dia Waste Coupling of PTMT (half or full threaded). (Minimum wieght 32mm-45gms).

S&F PVC connections 15mm dia size with PTMT nuts of length 450mm.

S&F brass chromium plated tubular towel rail 20 mm dia 60 cm long, with fancy type brass chromium plated bracket on both sides and fixed with steel screws and wooden/ rawl plugs as in repairs complete all as specified .

S & F Rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) 1000 Ltr capacity hoisted and fixed in position all as specified in SSR Part I .

Supply and fix, 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified.

Supply & Fixed Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) for 20 mm bore pipe .

S&F for 110 mm dia PVC (SWR) pipes single socked in any length with rubber joints, laid in trenches or in floor, wall etc. all as specified & directed.

Supply and fix 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches complete all as specified.

Supply and fix 110mm dia PVC (SWR) bend suitable for pipe fitted with ovel acess door complete all as specified.

Supply and fix 110mm dia PVC (SWR) bend suitable for pipe complete all as specified.

Supply and fix 75mm bore PVC (SWR) bends any radius, fitted with oval access door complete all as specified.

M&L for 75mm PVC(SWR) bend suitable for pipe complete all as specified.

Supply and fix 75mm bore PVC (SWR) vent cowl suitable for pipe complete all as specified.

Supply and fix 110mm bore PVC (SWR) junction, single T equal or unequal with or without door access complete all as specified.

Material and labour PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified.

Supply and fix 110mm bore PVC (SWR) reducer suitable for pipe complete all as specified.

Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade ISI marked including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified and directed.

Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade ISI marked including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified and directed.

Refixing of 15mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed. Note: Old serviceable GI tube obtained vide respective item above mentioned shall be reused.

Refixing of 20mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed. Note: Old serviceable GI tube obtained vide respctive item above mentioned shall be reused.

Cutting chases, pinning in, grooves or rebates trimming with or without reinforced surfaces making good to facing where required and pointed in cement mortar 1:3 and making good cutting exceeding 10 cm girth not exceeding 25 cm girth complete all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar (1:3) on Roof slab surface & water proofing compound mixed @ 3% finished fair and even complete all as specified. ( Note -W.P.C. shall be measured and paid separetly)

Supply & laying 3 mm thick(minimum) APP based polymeric membrane weighing not less than 3.0 kg/Sqm reinforced with polyester non woven fabric (weighing not less than160 gms/sqm) with minimum 100 mm transverse laps and 75 mm longitudinal lap over RCC and application shall be according to manufactures's instructions over cold solvent Bituminious primer @ 0.25 ltr/Sqm. Application of polymeric membrane shall be by torching etc as per manufacturer's instruction and complete all as directed

Material and labour for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mmx600mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick high Pressure Non Asbestos Fiber Cement decorative Board (E-Board Classic) in a grid of GI systtem duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. The last hanger at the end of each main runner should not be interlocked between main runners @ 610mm c/c, as to form 600 mm x 600 mm grid all as specified and directed. Make : Everest Industries Ltd or equivalent as per IS 14862 all as specified and directed.

M & L for preparation of newly plastered surfaces and applying three coats of white wash on wall complete all as specified and directed.

M & L for preparation of newly plastered surfaces and applying three coats of white wash on Ceiling surfaces complete all as specified and directed.

Material and labour for preparation of new or previously untreated wall surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @1.43 litre/10Sqm over and including priming coat of exterior primer aoolied @0.90 litre /10 Sqm over new surfaces complete all as specified and directed.

Material and labour preparation of new plastered surface of walls and applying two coat of oil emulsion distemper over one coat of primer on wall complete all as specified.

M&L preparation of new plastered surface of walls and applying wall care putty of 1 mm thickness over prepare plastered surface with the surface even and smooth complete all as specified.

Material and labour preparation ofnew and previously un-treated steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Material and labour preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coat of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coat of Synthetic enamel paint complete all as specified and as directed.

E & M Division items

Taking down carefully copper/aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc including removing from site for taking credit and making good to disturbed surface of walls, floors etc as per existing specification complete all as specified and as directed.

Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed.

Dismantling old unserviceable main switches, sheet metal enclosures DB including MCBs etc and removing from site for taking credit incl making good to disturbed surface of wall as per existing specification complete all as specified and as directed.

Taking out old U/s XLPE cable of any size/type taking out of olf bricks/cable cover complete all as specified and directed. (Excavation and earth work will be measured and paid separately under respective items)

Dismantling of U/s GI pipe of size 40mm/50 mm bore complete all as specified and directed.

Taking out old U/s GI PIPE of 25mm/32mm bore size/type including all GI fittings etc complete all as specified and directed. (Excavation and earth work will be measured and paid separately under respective items)

Taking out old U/s exiating earthing with all fixtures etc complete all as specified and directed. (Excavation and earth work will be measured and paid separately under respective items)

M&L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One light point controlled by one switch.

M&L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One fan point/exhaust fan point controlled by one, one way switch 5 Amp.

M&L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One bell point controlled by one bell switch 5 Amps

M&L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on the same board.

M&L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on independent board.

M&L for point wiring with FRLSH stranded copper conductor 2.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 2.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for 3 pin, 15 Amp socket outlet, independent

M&L for point wiring with FRLSH stranded copper conductor 4.0 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 4.0 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for one power point on independent board of AC/equipments etc controlled by one SP/SPN MCB. Note: The point wiring will be done from DBs to the switch sockets of any size with three wires running independently for each point and with no tappings.

S&F modular switch piano single pole one way 5 Amps 1 module all as specified and directed.

S&F modular socket outlet 2 in 1, 3 pin 5 Amp 2 module all as specified and directed.

S&F modular switch socket combination 16 amp 6 pin 3 module all as specified and directed.

S&F modular fan regulator 120W 2 module complete all as specified and directed.

S&F White cover plate with frame of 3 module complete all as specified and directed.

S&F White cover plate with frame of 4 module complete all as specified and directed.

S&F White cover plate with frame of 8 module complete all as specified and directed.

S&F switch piano flush type button single pole one way 5 Amps all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 Amp flush type all as specified and directed.

S&F switch piano flush type button single pole one way 15 Amps all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15amp flush type all as specified and directed.

S&F ceiling rose surface bakelite with three terminals all as specified and directed

M&L for submain wiring with two single core 1.5 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSHH drawn through and including PVC non metallic rigid PVC Conduit with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 1.5 sqmm PVC insulated unsheathed multi strand copper conductor earth wire FRLSH connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC Conduit will be measured as one length.

M&L for submain wiring with two single core 4.0 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSHH drawn through and including PVC non metallic rigid PVC Conduit with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 2.5 sqmm PVC insulated unsheathed multi strand copper conductor earth wire FRLSH connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC Conduit will be measured as one length.

M&L for submain wiring with two single core 6.0 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSHH drawn through and including PVC non metallic rigid Conduit conceled with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 4.0 sqmm PVC insulated unsheathed multi strand copper conductor earth wire FRLSH connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC Conduit will be measured as one length.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type down lighter with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply & Fix LED betten plastic type fitting of capacity 20W, operating on 230V, 50Hz, AC Supply having luminous efficacy of not less than 125 lumens/watts, CCT 6500K, P.F>0.9, 2.5 KV surge protection, 4-feet long, housing made out of extruded alluminium with decorative end caps elegently designed complete all as specified.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed..

S&F BLDC ceiling fan 1200mm sweep complete with blades, down rods, electronic regulator and accessories, 230 V, min air delivery 210 CFM with service value 6.00 BEE 5 star rated & provn of ‘S’ type fan hook including including taking down of old UNSV one and depositing to MES storeyard for keeping in safe custody complete all as specified and directed.

Supply & fix Wall mounting fan 400 mm sweep, operating on single phase, 230V, AC, 50 Hz having speed of 1400 RPM, air delivery 115 CMM, power output of 100W star rated along with blade, canopy, mounting brackets, rubber insulator.

S&F plastic body exhaust fan 300 mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with flexible copper cable including making holes on the wall and making good to the disturbed surfaces including taking down of old UNSV one and depositing to MES store yard complete all as specified and as directed.

S&F bldg security light, LED luminaire 30 watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge.

S&f Angle bracket 40mm dia for fixing building security light of 40mm dia of 1 mtr long bent to shape 45 degree for fixing of security light including MS clamps of suitable size including nuts, bolts complete all as specified and directed

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc complete all as specified and as directed.

S&F metal plug socket with MCB SP 20 Amp, 240 V enclosure for AC/equipment with neutral and earth point complete all as specified and directed.

S&F modular type 3/5 plug socket with MCB SP 20 Amp, 230 V incl concealig in wall suitable for geyser/AC/equipment with neutral and earth point complete all as specified and directed.

S&F sheet metal enclosure powder coated three phase and neutral DB for fixing of MCBs, 4 way double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

S&F sheet metal enclosure powder coated single phase DB for fixing of MCBs, 8 way double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

S&F MCB TPN of capacity 63 Amps 4 pole, 240 V, 10 KA 'B' curve complete all as specified and directed.

S&F MCB SPN of capacity 40-63 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed.

S&F MCB SP of capacity 5-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed.

M&L for earthing with galvanised steel earth plate electrode 600mmX600mmX6mm thick burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm dia GI wire protected by 20 mm bore light grade galvanised iron pipe and other end connected to test point as directed including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternaterlayers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover 10mm thick hinged to CI frame and 6mm MS rod for handle, necessary excavation and earth wok in hard/dense soil and disposal of spoil to a distance n exc 50 m and necessary testing complete all as shown in electrical plate No 3 of SSR part-I complete all as specified and directed.

Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 25 sqmm 3.5 core laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed.

Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 60 sqmm 2 core laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed.

Material & labour GI tube light grade 40 mm bore for protection of cable complete all as specified and directed.

M&L 100mm thick PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate for flooring complete all as specified and directed.

S&F gun metal gate valve 25mm dia, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.

M&L for steel water tubing 25mm dia, medium grade galvanised with new fitting laid in trenches or on wall complete all as specified and directed.

Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable, pipe etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed.

Returning, filling in trenches incl. spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing of surplus soil to a distance not exceeding 50 meter and deposited where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.

M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge.

Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250 mm x 150 mm x 40 mm laid in trenches all as specified.

M&L for bricks sub-class 'B' laid in trenches for cable protection complete all as specified and directed.

M&L for cutting of existing GI pipe line 25mm dia for inserting Tee and reducer etc for taking 25mm dia branch pipe including fittings complete

Please Enable Macros to View BoQ information