Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹84,427Accepted-AOC | L1 | Accepted-AOC Agreed | |
| 2 | Rejected-Technical | - | Rejected-Technical L2Rejected |
| Sl No | Description | Qty | Unit | NAUSHAD PS L1 | SHANTO PAULOSE L2 |
|---|---|---|---|---|---|
| 1.00MAINTANANCE | |||||
| 1.00 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | 1.68 | cum | 2,129 ₹3,576.72 Lowest | 2,299.32 ₹3,862.86 |
| 1.00 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 1.68 | cum | 7,713 ₹12,957.84 Lowest | 8,330.04 ₹13,994.47 |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 22.4 | sqm | 369.76 ₹8,282.62 Lowest | 399.34 ₹8,945.22 |
| 1.00 | OD436895/2025-2026:Providing and fixing factory made PVC door including cost of all materials , fittings and fitting charges etc. complete. ( Approved data of CE LSGD ) | 3 | sqm | 2,425.55 ₹7,276.65 Lowest | 2,619.59 ₹7,858.77 |
| 1.00 | 17.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White | 2 | each | 1,282.93 ₹2,565.86 Lowest | 1,385.56 ₹2,771.12 |
| 1.01 | 50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 10.5 | sqm | 1,017.6 ₹10,684.8 Lowest | 1,099.01 ₹11,539.61 |
| 1.01 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 9.9 | kg | 845.94 ₹8,374.81 Lowest | 913.62 ₹9,044.84 |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 15.42 | kg | 187.05 ₹2,884.31 Lowest | 202.01 ₹3,114.99 |
| 1.01 | OD436931/2025-2026:Plain G I ridge capping 225 mm flaps with 0.35 mm thick /nearest available size SS screws
including plain washers plain washers and bitumen washers etc. complete | 5 | metre | 286.62 ₹1,433.1 Lowest | 309.55 ₹1,547.75 |
Tender Value
₹84,643
EMD Value
₹2,116
Closing Date
4 Mar 2026, 1:00 pmClosed
Assistant Engineer
Office of Assistant Engineer LSGD Vathikudy
VATHIKUDY GP 2025-26 - PERUMTHOTTY SC COMMUNITY HALL MAINTANANCE IN VATHIKUDY GP ( 71/026)
2026_LSGD_840243_6
04/AE/TND/LID/EW/VTY/25-26
Open Tender
Civil Works - Buildings
Item Rate
45 days
Vathikudy G.P
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹2,116
Yes
30 Sept 2026
25 Feb 2026
5 Mar 2026
25 Feb 2026
4 Mar 2026
25 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1MAINTANANCE | |||||
| 1.001 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | 1.68 | cum | - | - |
| 1.002 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 1.68 | cum | - | - |
| 1.003 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 22.4 | sqm | - | - |
| 1.004 | OD436895/2025-2026:Providing and fixing factory made PVC door including cost of all materials , fittings and fitting charges etc. complete. ( Approved data of CE LSGD ) | 3 | sqm | - | - |
| 1.005 | 17.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White | 2 | each | - | - |
| 1.006 | 50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 10.5 | sqm | - | - |
| 1.007 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 9.9 | kg | - | - |
| 1.008 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 15.42 | kg | - | - |
| 1.009 | OD436931/2025-2026:Plain G I ridge capping 225 mm flaps with 0.35 mm thick /nearest available size SS screws
including plain washers plain washers and bitumen washers etc. complete | 5 | metre | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.37 MB
Tendernotice_2.pdf
PDF • 0.02 MB
viewsbd.pdf
Tender Documents • 1.65 MB
viewnit.pdf
Tender Documents • 0.02 MB
BOQ_1416524.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .