Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.8 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST TENDERER | |
| 2 | L2₹34.6 L+₹7.7 L (28.9%)Rejected-Finance AMBADIL NEAR PAACHAKKIL BUS STOP MALAPARAMBA POST KOZHIKODE DISTRICT KERALA 673 009 | KOZHIKODE | KOZHIKODE | KERALA | 673009 | L2 | Rejected-Finance NOT BEING LOWEST TENDERER | |
| 3 | L3₹35.5 L+₹8.7 L (32.6%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST TENDERER |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
5 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Fort Kochi
GE Fort Kochi-682001
PERIODICAL SERVICES TO CERTAIN MARRIED AND OTM ACCN AT SMA RAMESHWARAM, DAD RESIDENTIAL COMPLEX,PAMPA VIHAR-I and II AT PALLURUTHY
2023_MES_606863_1
8943/GE_Fort_Kochi
Open Tender
Civil Works
Item Rate
270 days
Fort Kochi
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Fort Kochi
₹60,000
Yes
5 Sept 2023
29 Jun 2023
7 Aug 2023
29 Jun 2023
5 Aug 2023
21 Jul 2023
Amount
M&L preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified
M&L preparation of old treated surfaces of wall and applying one coat of colour wash complete all as specified
M & L for preparing old decorated surfaces of ceiling & applying one coat of white wash on ceiling complete as directed.
Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified
M&L for rendering plaster 10mm thick in CM 1:6 finished even & smooth without using extra cement on fair faces of brick work or concrete surfaces of walls complete all as directed.
M & L for rendering 20mm thick plaster in two coats (8mm thick in CM 1:4 using liquid WPC over 12mm thick plaster in CM 1:6) on fair faces of brick work or concrete surfaces finished even & fair without using extra cement at any floor complete all as directed. Note: Water proofing compound shall be paid separately.
M&l for rendering plaster 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement as on ceiling complete all as specified.
Supply only liquid water proofing compound all as specified and directed
Chip and remove all damaged and de bonded concrete and plaster from the RCC column, beam, flights, landing, railing, chajja and slabs by manually or mechanically so as to expose the corroded reinforcement bars including the rent of tools, scaffolding complete at any height and labour charges for dumping the debris within a radius of 100 meters as directed by the Engr-in-Charge
Supply and application of rust remover/converter (Rebaklense RR of M/s Fosrock Chemicals India Ltd) or Amandur, (Manufactured by GK Technocom) over the corroded reinforcement bar where ever micro concreting is required and cleaning the same after application including the cost of all materials, rent of tools, scaffolding cost of brush etc complete all as directed.
Supply & application of Nitozinc Primer (Manufactured by M/s Fosrock Chemicals India Ltd) over the exposed steel reinforcements after removing the rust scales from the exposed reinforcement rods in one square meter area including the cost of all materials rent of tools, scaffolding, cost of paint brush complete all as specified.
Supply and application of Nitobond EP (Manufactured by M/s Fosrock Chemicals India Ltd) epoxy bonding agent over the old concrete surface including the cost of all materials, rent of tools, scaffolding and cost of painting brushes etc complete all as specified.
Providing additional reinforcement bars in place of more than 1/3 corroded reinforcement bars incl the charges for cutting, bending, placing and fixing in position using Lok-Fix E-55(Manufactured by M/s Fosroc Chemicals India Ltd) including the cost of all materials rent of all accessories and tools, scaffolding and supporting materials, labour charges including the cost of steel bars complete all as specified.
Supply & provisioning Renderoc RG non-shrink cementitious micro concrete (max 120 mm thick) (Manufactured by M/s Fosroc Chemicals India Ltd) to any thickness for beam and column. Fluid micro concrete shall be mixed with 6mm down coarse aggregate and specified quantity of water and mixed using a power operated slow speed stirrer and pouring inside the form work including the cost of all materials, rent for tools, scaffolding, and labour charges, water tight formwork etc. all as per manufacturer instructions complete all as specified.
M&L for treating holes, cracks etc. Upto 5mm by making "V" groove using patti blades and filling the cracks with ready to use crack fillers of approved make (fosroc or equivalent) all as specified and allowed to dry, upto 4 storey height complete all as specified and directed by Engineer-in-Charge.
-Ditto - all as per item No 15 here-in-above but work at 5th to 8th storey height.
-Ditto - all as per item No 15 here-in-above but work at 9th to 12th storey height.
M&L for treating holes, cracks etc. More than 5mm and upto 10mm, by making "V" groove using patti blades and filling the cracks with cement and sand aggregate mixture developed with polymer modified mortar (PMM) with suitable poymers like Home shield crack fill paste, Home shield advance latex plus and home shield cement mi plus(Berger make or equivalent) and allowed to dry, upto 4 storey height complete all as specified and directed by Engineer-in-Charge.
-Ditto - all as per item No 18 here-in-above but work at 5th to 8th storey height.
-Ditto - all as per item No 18 here-in-above but work at 9th to 12th storey height.
M&L for treating holes, cracks etc. more than 10mm and upto 40mm, and filling the cracks by using flexible, 2 pack, polysulphide sealant like Berger home shield joint seal GG/PG (Berger make or equivalent) and allowed to dry, upto 4 storey height complete all as specified and directed by Engineer-in-Charge.
-Ditto - all as per item No 21 here-in-above but work at 5th to 8th storey height.
-Ditto - all as per item No 21 here-in-above but work at 9th to 12th storey height.
M&L for application of one coat of primer with sealant properties using "Seal -O -Prime" or "Weather coat exterior primer" (of Berger make or equivalent in other makes) complete and allowed to dry overnight to receive first coat of emulsion paint, upto 4 storey bldg, complete all as specified and directed by Engineer-in-Charge. (PS : Before application of the priming coat, the moisture of the wall surface shall be checked and shall be not less than 12%, when checked with the moisture meter)
-Ditto - all as per item No 24 here-in-above but work at 5th to 8th storey height.
-Ditto - all as per item No 24 here-in-above but work at 9th to 12th storey height.
M&L for application of first coat of Exterior emulsion paint on primed wall surfaces using rollers made from foam or synthetic fibres, to get a smooth and tint free surface, upto 4 storey height all as specified and directed by Engineer-in-Charge and allowed to dry for atleast 8 hrs./ overnight to receive second coat of emulsion paint all as specified and directed by Engineer-in-Charge.
-Ditto - all as per item No 27 here-in-above but work at 5th to 8th storey height.
-Ditto - all as per item No 27 here-in-above but work at 9th to 12th storey height.
M&L for application of second coat of Exterior emulsion paint on wall surfaces using rollers made from foam or synthetic fibres, to get a smooth and tint free surface, upto 4 storey height all as specified and directed by Engineer-in-Charge.
-Ditto - all as per item No 30 here-in-above but work at 5th to 8th storey height.
-Ditto - all as per item No 30 here-in-above but work at 9th to 12th storey height.
M&L preparation of old treated surfaces of wall / chajja/shaft and applying one coat of Acrylic exterior emulsion paint using rollers made from foam or synthetic fibres, to get a smooth and tint free surface, upto 4 storey height complete all as specified and directed by Engineer-in-Charge.
M&L for three coats of white wash including preparation of newly plastered surfaces of wall complete all as specified.
M & L for preparing newly plastered surfaces of wall & applying two coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of alkali resitant primer over one coat of wall care putty (minimum thickness 1mm) and complete all as directed by Engineer-in-Charge.
M & L for preparing newly plastered surfaces of ceiling & applying two coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of alkali resitant primer and complete all as directed by Engineer-in-Charge.
M&L for three coats of white wash including preparation of newly plastered surfaces of ceiling complete all as specified.
M&L for preparation of surfaces of old mangalore pattern roof tiles and applying two coat of weather coat tile protektor by Berger paints or equivalant approved manufacturer to MP roof / chajjas tile surfaces from GF upto 12th storey height complete all as directed.
Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and directed.
M&L preparation of old painted steel & iron surfaces of any description, over 10cm in width or girth,and applying two coat of synthetic enamel paint complete all as specified.
M & L removing shrubs, vegetation, roots etc., from external wall surfaces, by dismantling brick work, RCC or taking down plastering as the case may be, including dismantling SWR pipes, OH PVC service tanks etc. and refixing the same in original position and making good the surface dismantled all as specified and directed by Engineer-in-Charge upto the height of 9 storey bldg.(Area to be dismantled exc 1Sqm and not exc 3 Sqm)
M&L preparation of old treated surfaces of wall and applying one coat of acrylic distemper complete all as specified
EXCEL ENGINEERING
LAKSHMI BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .