Spl repair of Bldg No T-07 of No 1 PS Sec ,CCIB and Provn of 04 x Toilet block and 02 x Bath at 314 Fd Wksp Coy EME under GE Dehradun.

Amount

Taking down chowkat with shutter any description n. exc 1.5 Sqm each complete all as specified and as directed by Engr-in-Charge.

Taking down chowkat with shutter exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and as directed by Engr-in-Charge.

Taking down door shutter of any description exc. 1 sqm and n. exc. 2 sqm each complete .

Taking down door shutter of any description exc. 2 sqm each complete .

Supply and fix powder coated aluminium anodised door with frame and shutter, and glazing 5.0 mm thick plain glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary including taking down complete all as specified and directed. section of aluminium door shall be of following sizes: - Top;- 85x44.5x1.20 mm thick fixed with rawal plug width;- 85x44.5x1.20 mm thick Bottom;- 100x44.5x1.20 mm thick Style;- 85x44.5x1.20 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 150mm Aluminium tower bold 9.9 mm dia shoot 200 mm long Mortice lock stainless steel - 100 mm 4 lever Aluminium stopper cleat aluminium hinges 100 mm long Note;- (i) Making good of wall surface with matching to existing surface complete all as specified ad directed (ii) PCC shall be measured and paid seperatelly Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Supply and fix powder coated aluminium window double shutter with frame and shutter and glazing wire gauge, rubber gasket, aluminium glazing clips, aluminium peg stay, iron mongary etc including taking down complete all as specified and directed. aluminium sections shall be given below: - Frame;- 85x44.5x1.20 mm thick fixed with rawal plug Style;- 44.5x44.5x1.20 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 100mm Aluminium tower bold 9.9 mm dia shoot 150 mm long Glass;- 5 mm thick frosted/ plain glass ( as directed) wire mesh Stainless steel of 0.063 mm nominal dia wire and average width of arperture 1.40 mm Aluminium stopper cleat aluminium hinges 100 mm long powder coated Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Supply and fix in repairs powder coated aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick plain glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading of following sizes;- Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thick Bottuom section;-100x44.5x1.22 mm thick Complete all as specified and directed by the Engr in charge Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Supply and fix in repair powder coated aluminium grill of size 75x75x4-5 mm thick size fixed with aluminium frame including taking down old grill complete all as specified and directed

Supply and fix powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fittings, glazing, wire gauge, rubber packing, aluminium beading etc. as specified below including taking down old window/ventilator and making good of wall surface to match with existing surface complete all as specified and directed : - Frame : 44.5 x 44.5 mm x 1.80 mm thick Middle rail : 44.5 x 44.5 mm x 1.80 mm thick Glazing: 5 mm thick frosted glass fixed with rubber gasket and aluminium beading. Wire gauge: stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium beading.

Supply and fix in repair Solid PVC Wall panneling consisting of 5mm thick of wood grains PVC sheet inclusive of solvent and fixing to walls on PVC frame including all fillets as per specifications and drawing complete all as specified and directed.

Supply and fix factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 12mm thick toughened glass door of size as required at site incl of eacting work film as required on one side including two nos handle ,one lock, Double action floor spring hydraulically regulated made up of minimum 1.25 thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy suitable for toughened glass door upto 80 Kg weight, with top and bottom SS pivot, having corrosion resistance galvanized steel housing, High grade cast iron mechanism body with SS cover plate, other parts made of MS, heavy duty, ISI markedand other accessories complete for hanging door complete all as specified and directed by Engr-in-Charge.

Supply and fix 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed Engr-in-Charge.

Supply and fix 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

Supply and fix flush shutters 35 mm thick one face is covered with decorative face veneer teak wood finished with lipping/frame to match , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Supply and fix factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete with glazing bars dovetailed or welded with one shop coat of primer complete all as specified and directed.

Supply and fix factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete without glazing bars, as fly proof shutters with one shop coat of primer complete all as specified and directed.

Supply and fix factory made steel ventilator with top hung shutters including hinges with steel handle, steel peg stay, tower bolt etc complete all as specified and directed.

Material and labour Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Material and labour mild steel plain black sheet 0.8 mm in wall cladding steel gates and similar work cut to size, holes, punched .including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joint complete all as specified and directed

Supply and fix in repair 200 mm long 1st class, solid in one piece stainless steel barrel tower bolts 204 grade complete all as specified and directed.

Supply and fix 150mm size solid in one piece stainless steel handles,cast D type 204 grade, fixed in stainless steel screws all as directed complete all as specified and directed by Engr-in-Charge.

Supply and fix 100 mm size stainless steel butt hinges and fixed with stainless steel screws, complete all as specified and directed.

Supply and fix 300mm long stainless steel sliding door bolts 204 grade, hasp and staple type with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Supply and fix stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

Material and labour sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

Supply and fix 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.

Supply and fix in repairs of aluminium body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed.

Supply and fix in repair factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc as per manufacture specification complete all as specified and directed by Engr-in-Charge.

Supply and fix Continuous (Piano) hinges , mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and directed.

Supply and fix hasp and staple 75mm safety type, stainless steel type 202 grade with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fix auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) open able at 110 degree for kitchen cabinet shutters stainless steel complete all as specified and directed.

Supply and fix Ball bearing runner 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs,complete all as specified and directed.

Supply and fix stainless steel handle fency type 100 mm size for kitchen cabinet shutters complete all as specified and directed.

Supply and fix magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

Supply and fix chrome plates stainless steel wire basket (storage basket) pull out type for large utensils, size 480x500x150mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.

Supply and fix chrome plates stainless steel wire basket (cup and saucer basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.

Supply and fix chrome plates stainless steel wire basket (plate basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed

Supply and fix chrome plates stainless steel wire basket (cutlery basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.

Supply and fix chrome plates stainless steel wire basket (Grain Trolley) pull out type for large utensils, size 480x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.

Supply and fix in repair peg set of five stainless steel fixed on CP steel plate 304 grade including fixing screw as per approved sample complete all as specified.

Supply and fix in repairs CP brass Soap dish 6 inches complete all as specified and directed.

Supply and fix in repairs glass corner shelf suitable size made of 5mm thick toughned glass all as specified.

Supply and fix in repair Glass shelf assembly consisting of 5.5mm thick toughned glass with chromium plated guard and railing size 500x125mm with brass bracket complete all as specified.

Supply and fix in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed.

Supply and fix in repairs brass chromium plated towel ring complete all as specified.

Supply and fix brass chromium plated towel rail, 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

Supply and fix in repairs chromium plated Toilet paper holder complete all as specified and directed

Supply and fix in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed.

Supply and fix in repairs fancy type size 450 x 600 x 5.00 mm thick or higher size looking mirror fixed to wall with mirror stainless steel nuts,complete all as specified and directed.

Supply and fix in repair 32mm dia PVC waste pipe for WHB and sink 90cm long with union,complete all as specified and directed.

Supply and fix in repair CP Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legSupply and fix langes complete all as specified and directed.

Supply and fix in repair 15mm dia CP brass chromium plated Central hole basin/sink mixer with accessories in wash basin for fixing hot and cold water, dcrewed down for 15mm bore GI pipe complete all as specified and directed.

Supply and fix in repair pillar taps, brass, with capstan head, fancy type chromium , screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

Supply and fix in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix in repair 15 mm bore Angle cock/stop valves cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

Supply and fix 15mm dia swan neck pillar tap (for oval type WHB) brass chromium plated with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, and fixed complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed.

Supply and fix in repairs vitreous china wash down water closet Padestal pattern white (excluding flushing cistern and fluch pipe) with CI 'P' or 'S; trap including plastic white seet cover, CP Jet spray with 1.0 mtr long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floor complete all specified and directed.

Supply and fix in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed including 100mm dia CI 'P' trap of 60cm long complete all as specified and directed.

Supply and fix in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed

Supply and fix in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed

Supply and fix PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed .

Supply and fix in repair CP steel grating 100 mm to 125mm dia round fix on floor/nahani trap with hole/without fixed with cement morter, complete all as specified.

Supply and fix in repair double bowl stainless steel kitchen sink made of stainless steel 1mm thick 304 Grade, coupling plug, washers and waste pipes including bedding in cement morter on to draft wall or including fixing cantilever brackets and connecting union to pipe, overall size 1000mm x 545mm x 230 mm, bowl sice 460mm x 460mm x 230mm all as specified and directed.Make: Nirali modle Omate or equivalent in Prayag polymer pvt ltd and Blue star- silver shine.

Supply and fix in repairs plate rack 200mm and size 90cmx105cm made out off 1.00 mm thick stainless steel complete all as specified and as directed.

Supply and fix in repair 20 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends complete all as speccified and directed as per approved sample complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed.

Supply and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed.

Supply and fix 20mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc half but n exc full brick wall complete all as specified & directed.

Supply and fix rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.

Supply and fix ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 20mm bore iron pipe and fixed ( minimum weight 20mm -210 gms) complete all as specified and directed.

Supply and fix 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

Material and labour for Vitrified Ceramic tiles light shade 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling of existing tiling complete all as specified

All as per item No 76 here-in-before but as in skirting/dado including 10 mm thick rendering in cement mortar 1:4, complete all as specified..

Material and labour non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed

Material and labour for coloured Glazed ceramic tiles in vertical surfaces of size 350mm x 250mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed.

Material and labour for Cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

Material and labour for 40mm thick cement concrete 1:2:4 type B0 using 12.50 mm graded stone agg in floor,bedding layer over roof slab laid in alternate bays, etc and finished the top surface of concete by brooming complete all as specified and directed.

Material and labour for coloured pre-polished rubber moulded chequred cement concrete tile 300mm x 300mm x 20-22mm thick with anti skid properties set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material and labour 75mm thick PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement and demolition of existing old cement concrete of plinth protection in ground floor and paving below or above ground level complete all as specified.

Material and labour for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in kitchen slab, slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja and in shelves and the like, including demolition of exiting reinforced cement concrete complete all as specified and directed.

Material and labour for form work to RCC Slab any descriptin such as kitchen slab,roof, chajja,floor etc.complete all as specified and directed.

Supply and fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

All as per serial item No 87 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

Supply and fix granite 16-18mm thick of any type ( table rubbed and polished in cooking platform, steps, jambs pillars, window cill, and like in cement mortar 1:4 incl pointing in white cement including demolition of existing stone complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in shed haunching,cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and as directed by Engr-in-Charge.

Material and labour Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM ( 1:6 ) complete all as specified and as directed by Engr-in-Charge.

Material and labour Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick, built in CM ( 1:4 ) complete all as specified and as directed by Engr-in-Charge.

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and fair complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified in SSR Part I and directed by Engr-in-Charge.

Material and labour for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified

Material and labour for complete removal of old existing treatment of internal or external surfaces of wall complete all as specified and directed by the Engr-in-charge.

Material and labour applying interior grade wall care putty 1-1.5mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

Material and labour two coat oil bound distemper by roller any tint over a coat of primer on old surfaces of walls complete all as specified in SSR Part I including complete all as directed by Engr-in-charge.

Material and labour for preparation of wall and applying exterior grade acrylic water proof wall care putty 1-1.5mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

Material and labour two coat of cement base paint on external wall surfaces complete all as specified in SSR Part I including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.Note : The work will be carried out upto double storey builing the rate of scafolding is included for this item also.

Material and labour for preparation of new plastered surfaces and applying 3 coats of white wash on walls complete all as specified and as directed .

Material and labour for preparation of new/previously untreated surfaces of wood over 10 cm width/girth and applying two coat of synthetic enamel paint all as specified in SSR Part I and directed by Engr-in-charge.

Taking down AC/Salt glazed ware pipes and fittings upto 110mm complete all as specified.

Supply and fix PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls/floor etc complete all as specified and directed.

Supply and fix PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls/floor etc complete all as specified and directed.

Supply and fix PVC (SWR) pipes of 110 mm dia, bend with oval acess door, T' socket reducer etc complete all as specified and directed.

Supply and fix PVC (SWR) pipes of 75 mm dia, bend with oval acess door, T' socket reducer etc , complete all as specified and directed.

Supply and fix in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 100 mm bore CI pipe.grouted in PCC 1:2:4 complete all as specified and directed

Supply and fix in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 75 mm bore CI pipe.grouted in PCC 1:2:4 complete all as specified and directed

PVC (SWR) floor trap, plain with grating including jointed with solvent cement of 75 mm outlet dia complete all as specified and directed.

Dismantling asbestos cement (corugated or semicorrugated etc) sheets, in roof covering/shed including ridge complete all as specified and directed

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and as directed..

Material and labour false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge.

Material & Labour for providing and fixing stainlesssteel (Grade 304) railing/ corner gaurd made of hollow tubes,channels, plates, sheets etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of old u/s S/S complete all as spfd and directed

Excavation in soft/loose soil as in post holes each not exc 0.5 cum & getting out, returning filling in and ramming earth in layers not exc 25cm thick, watering making good surfaces and removal of surplus soil to a distance not exc 50 mtr complete all as specified and directed.

Dismantling of unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Supply and fix for Steel work in tubular trusses/purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed

Supply and fix Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W(Gde E-250) quality-A all as specified and directed

Material and labour applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed

Material and labour for Constn of soakage well, excavation in any type of soil, foundation PCC 1:3:6, wall of honeycombed , Brick masonary in CM, RCC cover slab size of well 2.40 dia and 3.00m depth , including demolition of existing old unserviceable soakage well and filling soil to match surface with existing ground surface complete all as specified. Note:- the rate of soil for filling in old U/S soakage well is included with this item.

Material and labour for 50 users Septic tanks, exc, in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc. (Ref TD/217 of CE Bareilly Zone )

Supply and fix 150 mm Salt glazed stoneware drain pipes, grade ‘A’ complete all as specified and diirected

Material and labour for PCC (1:3:6) type C-2 (using 20 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

Material and labour for Spreading clean and dry sand filling under floors or in foundations including spreading, levelling, complete all as specified directed.

Material and labour pre polished coloured machine pressed precast concrete interlocking paver block any shape and size fixed with gray cement and pigment confirming to IS15658-2006 of 80mm thickness M-40 grade all as specified and directed.

Supply and laying 450 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out complete all as specified and as directed.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in hard/dense soil complete all as specified and as directed .

Material and labour for cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) 40mm thick in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified.

Material and labour for RCC Type B-1, 1:2:4 nominal mix (using 20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.

Material and labour for Providing precast cement concrete 1:2:4 nominal mix type B1 (using 20 mm graded aggregate) set in cement mortar 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified.

Material and labour Formwork flat rough finished to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and openingcomplete all as specified.

Material and labour for moorum / red bajari filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering and duly consolidating complete all as specified and directed.

Material and labour for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed.

Material and labour 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub base complete all as specified and as directed by the Engr-in-Charge.

Material and labour for cement concrete 1:2:4 type B-1 (20 mm graded stone aggregate) 25 mm thick as in floor finish complete all as specified and as directed .

Material and labour for screed bedding 15 mm thick in cement mortar (1:6) for floor laying floor finish complete all as specified and as directed .

Material and labour for coloured joint free non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material and labour for coloured digital ceramic tiles in vertical surface 375 x 250 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM (1:3) complete all as specified.

Supply and fix Vitreous China Urinals, half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinals against wall in CM 1:2, securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, CP waste coupling, waste pipe, automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete. complete all as specified and as directed by Engr-in-Charge.

Supply and fix 110 mm dia PVC (SWR) vent cowl complete all as specified and directed

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and as directed by Engr-in-Charge.

Removing excavated material n.exe 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

Material and labour for rendering 15 mm thick on brick work or concrete surfaces (man hole etc) in cement mortar (1:4) with WPC & with finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge. Note: Water proofing compound will be measured separately under respective item of this schedule.

Supply only integral waterproofing compoundcomplete all as specified and directed

Material and labour Precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of man hole, septic tank, soak well etc set in cement mortar 1:4 complete all as specified and directed

Supply and fix mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix decorative wall mounting made out of polycarbonated suitable for and incl retrofit 9 watts LED bulb complete all as specified.

Supply and fix hanging light for ceiling with adjustable cord length of 90 cm madeout of polycarbonated and incl retrofit 9 watts LED bulb complete all as specified.

Supply and fix Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with lamp 6500/4000 K complete pre-wired all accessories complete all as specified.

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp and incl bracket, clamp fastner, bolts, nuts & washers incl grouting etc and 3 core 1 sqmm PVC insulated cable from ceiling rose to light fitting complete all as specified

Supply and fix LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed .

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed

Supply and fix LED Bollards of 10 watt 230 watt volts AC outdoor type for pathways and gardens are made with aluminium extrusion for sturdiness and better finish with IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed

Supply and fix Lamp holder polycarbonate insulated body, with back plate with and incl LED lamp retrofit 9/10 watts complete all as specified and directed

Taking down carefully copper aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose, lamp holder and regulator, light fitting etc and removing from site and making good to any disturbed surfaces of walls floors etc. as per existing specification complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (Nominal Area)PVC insulated FRLS un sheathed multi stranded copper conductor drawn in and including non metalic rigid PVC concealed conduit of med grade of suitable size with all fitings and accessories including factory made MS pressed modular metal flush boxes with zinc coated duly concealed in wall including reqd as per site reqmt for mounting modular switches, sockets fan regulators etc including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly complete all as specified (Note: Colour code shall be maintained as per IE rule). Make of wire:- Finolex/L&T/Havells Make of conduit :- Finolex/Anchor/Presffit.

(a) One light point/ Fan point controlled by one, one way switch

(c) One bell point controlled by one-one way switch.

(d) One three pin 5 Amp socket on same board with other switches.

(e) One three pin 5 Amp socket on independent board

All as per item No 161 here-in-before but with 2.5 Sqmm. (nominal area) cable for phase & neutral for one 3 Pin 15 amp socket on independent board including one 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable FRLS,1100 volts grade as earth continuity conductor upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

Supply and fixing decorative polycarbonate modular white frame for fixing of switches and cover plate suitable for 8/12 modules 3 row and blanking plate if any required for spare module complete all as specified and directed

All as per item No 163 here-in-before but 6 module complete all as specified and directed

All as per item No 163 here-in-before but 3 module complete all as specified and directed

All as per item No 163 here-in-before but 1 or 2 module complete all as specified and directed

Supply and fix Modular switch 1 way 06 amp single polecomplete all as specified and directed

Supply and fix Modular switch 1 way 16 amp single polecomplete all as specified and directed

Supply and fix of modular socket outlet 16A-5 pin combined of 02 modulecomplete all as specified and directed

Supply and fix of modular socket outlet 6A-5 pin combined of 02 modulecomplete all as specified and directed

S & of moduar bell push 6 Amp 1 modulecomplete all as specified and directed

Supply and fix of modular fan step regulator 120 W-2 modulecomplete all as specified and directed

Supply and fix Switch piano flush button single pole one way 5 Amp complete all as specified and directed

Supply and fix Socket outlet, 5 Pin, 6 Amp 2 in 1, flush type, universal complete all as specified and directed

Supply and fix Socket outlet 2 in 1, 5 pin, 5 and 15 Amp flush type complete all as specified and directed

Supply and fix Switch piano flush button single pole one way 15 Amp complete all as specified and directed

Supply and fix Fan regulator stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as reqd complete all as specified and directed .

Supply and fix calling bell, AC 230 Volt single pole complete all as specified and directed

Supply and fixing Ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten and making good the disturbed surface complete all as specified and directed.

Material and labour , sub main wiring with two single core PVC insulated unsheathed FRLS multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLS copper conductor colour code as a earth continuity and connected upto DB complete all as specified and directed.

Material and labour for Distribution board TPN DB 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made, fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar complete all as specified and directed.

Material and labour for Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar complete all as specified and directed

Supply and fix , MCB TPN 40 to 63 Amps, 240 Volts having braking capacity 10 KA complete all as specified and directed

Supply and fix , MCB SP 6 to 40 Amp, 240 Volts, 'B' curve having breaking capacity 10 KA complete all as specified and directed

Supply and fix , MCB SPN 40 to 63 Amps, 240 Volts having braking capacity 10 KA complete all as specified and directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of 300 mm sweep complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed

Supply and fix in replacement MMCB DBOXX combo box with one single pole MCB 20 Amp 10 KA C series suitable for AC/geyser etc complete all as specrified & directed

Supply and fix PVC connection pipe (suitable to cold water) of 15 mm dia, 450 mm long with two brass CP hexagonal nuts adopter rubber washer complete all as specified and directed .

Supply and fix PVC connection pipe (suitable to Hot water) of 15 mm dia 450 mm long with brass flexible tube alongwith CP Hexagonal nuts adopter rubebr washer complete all as specified and directed .

Supply and fix GI pipe "medium grade" with all fitting and fixed complete to walls of 15 mm bore size complete all as specified and directed .

Supply and fix CP stop cock of size 15 mm bore dia complete all as specified and directed .

Supply and fix CP cast copper alloy with crutch handle screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 25 Sqmm 4 Core complete all as specified and directed .

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed

Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete all as specified and directed

Supply and fix tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete. Note: (i) Earthing has to done by spl persons and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

Material and labour point wiring with 1.5 Sqmm including concealed PVC conduit medium grade including accessories along with continuous earth wire 1.5 Sqmm PVC insulatedfor one light point/Fan point controlled by one ,one way switch incl cutting chases and making good as per existing surface complete all as specified and directed

All as per Item No 200 mentioned here-in- before but one three pin 5 Amps socket out let on the same board with other switches with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete all as specified and directed

All as per Item No 200 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated copper conductor and 1.5 Sqmm copper conductor for continuous earthing complete all as specified and directed

Supply and fix Switch piano flush type single pole one way 6 Amp complete all as directed.

Supply and fix Socket outlet 3 pin , 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed

Supply and fix switch socket 2 in 1, 3 pin , 15/16 Amps flush type universal multipurpose complete all as specified and directed

Supply and fix Lamp holder with , insulated body, with back plate suitable for batten fittings including 9/10 Watt LED Bulbs complete all as specified and directed.

Supply and fix Energy efficient LED tube light fitting box type with and incl retrofit 1x18W LED with connector etc complete pre-wired all accessories. Complete all as specified.

Supply and fix mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

Supply and fix , in repair, MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

Supply and fix , MCB SPN 40 to 63 Amps, 240 volts 'B' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

Supply and fix , MCB SP 240 volts, 6 to 40 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, frame and louvers all as specified and directed by Engr-in- Charge.

Supply and fix water stortage type of Geyser 25 Ltr capacity (Copper Tank) with 5 star BEE rating with all fixing arrangement including nuts, bolts, washer incl brakets etc as reqd complete all as specified and directed by Engr-in-Charge.

PRAGATI ENTERPRISES

M/s Pradeep Kumar