Re-conductoring of LT line under Punchavayal Factory padi Transformer

Reconductoring LT line with ABC

Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading

Transporting one LT PSC pole by Head load for an average distance of one km (limited to 0.3km).

Erecting one LT PSC Pole in position incl. digging & back filling pit.

Providing Strut using LT PSC pole incl. digging & back filling pit.

Providing Stay for LT poles incl. digging & back filling pit.

Renewal of existing damaged/broken old LT stay with existing stay rod.

Straightening one Slanted LT pole after unbinding the line and rebinding the line after work.

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion

Dismantling one section fuse

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc.

Dismantling (without damage) one km LT Sph 2 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Dismantling (without damage) one km LT additional conductor line, cross arms, insulators and stacking the conductors in rolls.

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Stringing one km LT 1ph 2 wire line XLPE Insulated ACSR Rabbit or equivalent, incl. fitting cross arm etc. removing touchings and conveyance of materials.

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Erection of suspension clamp for LT ABC of any size

Installing One No. Insulation piercing connector of size Main :16 to 95 ,Tap:1.5 to 16 Sq.mm

Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap 16-95 sqmm

Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size

Providing End Caps

Providing one Driven Earth using Steel earth rod at standard distance away from the pole/structure in loose soil.

Additional rate for excavation of one Pit for LT Pole/LT Stay in Laterite.

Additional rate for excavation of one Pit for LT Pole/LT Stay in Hard Laterite.

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Insertion of one HT PSC pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Renewal of existing damaged/broken old 11kV Stay to the existing stay rod.

Dismantling one damaged LT TW/RSJ/Rail pole after disconnecting stays, strut etc. and stacking the same.

Please Enable Macros to View BoQ information