Renovation & Construction of New Meeting Hall (Court Room) at Prant Office,Patan.

Name of Work :-

Renovation & Construction of New Meeting Hall (Court Room) at Prant Office ,Patan

Bill of Quantity

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

1 858.00 Excavation for foundation upto 1.50mt. Depth

including sorting out and stacking of useful materials Rupees One Hundred

and disposing of the excavated stuff as directed with Twenty Eight And Paise

in 50m. Lead (A) loose or soft Soil 128.79 Seventy Nine Only Cu.mt.

2 623.00 Excavation for foundation for depth from 1.5 m to

3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff Rupees One Hundred

upto 50 Meter lead.(A) Loose or Soft Soil Forty Two And Paise

142.78 Seventy Eight Only Cu.mt.

3 15.00 Excavation for foundation for depth from 3.0 m to

5.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff Rupees Three Hundred

upto 50 Meter lead.(hard murram Sixteen And Paise

316.22 Twenty Two Only Cu.mt.

4 10.00 Excavation for foundation for depth from 5.0 m to

7.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff Rupees Three Hundred

upto 50 Meter lead.(hard murram Thirty One And Paise

331.86 Eighty Six Only Cu.mt.

5 22.00 Filling in plinth with sand under floors including Rupees Four Hundred

watering ramming, consolidating and dressing Twenty Nine And Paise

complete 429.24 Twenty Four Only Cu.mt.

6 57.00 Providing and laying controlled cement concrete

M.150 for curing complete excluding cost of Rupees Three Thousand

formwork and reinforcement for reinforced concrete Seven Hundred Seventy

work in (A) Foundations, footings,Base of columns Five And Paise Forty

and Mass concrete 3775.43 Three Only Cu.mt.

7 130.00 Providing and laying controlled cement concrete M

250 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in. (A) Foundation footing, Rupees Four Thousand

base of columns & mass concrete. Four Hundred Forty Six

4446.02 And Paise Two Only Cu.mt.

8 15.00 Providing and laying controlled cement concrete M

250 using B.T. stone aggregate and curing complete

including the cost of form work but excluding the cost Rupees Seven Thousand

of reinforcement for reinforced concrete work in. Six Hundred Sixty Three

Columns up to plinth level. And Paise Eighty Eight

7663.88 Only Cu.mt.

9 212.00 Providing and laying cement concrete 1:3:6 (1-

Cement : 3- Coarse sand : 6- crushed stone Rupees Two Thousand

aggregate 40mm normal size) and curing complete Nine Hundred Eighty Five

excluding cost of formwork in (A) Foundation and And Paise Eighty Six

Plinth 2985.86 Only Cu.mt.

10 53.00 Provinding and Laying controlled cement concrete M-

250 & curing complete including the cost of form Rupees Six Thousand

work but excluding cost of reinforcement concrete One Hundred Seventy

work in Beams, Girders and Cantilever up to floor for Seven And Paise Sixteen

PLINTH BEAMS 6177.16 Only Cu.mt.

11 78.00 Brick work using common Brunt clay building bricks

having crushing strength not less than 35 Rupees Three Thousand

Kg./Sq.cm.. In foundation and plinth in cement Seven Hundred Thirty

mortar 1:5 (1cement : 5 fine sand) (b) Conventional Nine And Paise Seventy

3739.74 Four Only Cu.mt.

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

12 1189.00 Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers

not exceeding 20 cm. in depth consolidating each Rupees One Hundred

deposited layer by ramming and watering etc Thirty Seven And Paise

complete 137.47 Forty Seven Only Cu.mt.

13 91.00 Filling in foundation and plinth with murrum or Rupees Two Hundred

selected soil in layers of 20cm. thickness including Seventy Three And Paise

watering, ramming and consolidating etc. completed. 273.86 Eighty Six Only Cu.mt.

14 457.00 Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for

termite control treatment including labour and

material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion

with 19 liter give 1 % concrentration inclusive of one

litre chemical emulsion appication at the rate of 5 Rupees One Hundred

Litre chemical / Sqm of surface is recommended as Twenty Four And Paise

per I.S 124.35 Thirty Five Only Sq.mt.

15 58.00 Provinding and Laying controlled cement concrete M- Rupees Five Thousand

150 and with curing etc.complete. Including the cost Eight Hundred Fifty Four

of formwork but excluding the cost of reinforcement And Paise Ninety Seven

for R.C.C Plinth Slab 5854.97 Only Cu.mt.

16 28.00 Provinding and Laying controlled cement concrete M-

200 and with curing etc.complete. Including the cost

of formwork but excluding the cost of reinforcement

for R.C.C work in Column having any cross section Rupees Seven Thousand

area of Column.For Ground Floor Column. Six Hundred Eight And

7608.33 Paise Thirty Three Only Cu.mt.

17 28.00 Provinding and Laying controlled cement concrete M-

200 and with curing etc.complete. Including the cost

of formwork but excluding the cost of reinforcement Rupees Seven Thousand

for R.C.C work in Column heving any cross section Six Hundred Forty Seven

area of Column.For First Floor Column. And Paise Sixty Two

7647.62 Only Cu.mt.

18 4.00 Provinding and Laying controlled cement concrete M-

200 and with curing etc.complete. Including the cost

of formwork but excluding the cost of reinforcement Rupees Seven Thousand

for R.C.C work in Column heving any cross section Six Hundred Eighty Six

area of Column.For Second Floor Column. And Paise Ninety One

7686.91 Only Cu.mt.

19 66.00 Provinding and Laying controlled cement concrete M-

200 and with curing etc.complete. Including the cost Rupees Six Thousand

of formwork but excluding the cost of reinforcement One Hundred Twenty

for R.C.C work in beam heving any cross section One And Paise Sixty One

area of BEAM. for Ground floor. 6121.61 Only Cu.mt.

20 66.00 Provinding and Laying controlled cement concrete M-

200 and with curing etc.complete. Including the cost

of formwork but excluding the cost of reinforcement Rupees Six Thousand

for R.C.C work in beam heving any cross section One Hundred Sixty And

area of BEAM. for First floor. 6160.90 Paise Ninety Only Cu.mt.

21 5.00 Provinding and Laying controlled cement concrete M-

200 and with curing etc.complete. Including the cost

of formwork but excluding the cost of reinforcement Rupees Six Thousand

for R.C.C work in beam heving any cross section Two Hundred And Paise

area of BEAM. for Second floor. 6200.19 Nineteen Only Cu.mt.

22 1.00 Provinding and Laying controlled cement concrete M-

200 and with curing etc.complete. Including the cost

of formwork but excluding the cost of reinforcement Rupees Six Thousand

for R.C.C work in Lintel.For Ground Floor Two Hundred Seventy

6272.10 Two And Paise Ten Only Cu.mt.

23 1.00 Provinding and Laying controlled cement concrete M- Rupees Six Thousand

200 and with curing etc.complete. Including the cost Three Hundred Eleven

of formwork but excluding the cost of reinforcement And Paise Thirty Nine

for R.C.C work in Lintel.For First Floor 6311.39 Only Cu.mt.

24 1.00 Provinding and Laying controlled cement concrete M-

200 and with curing etc.complete. Including the cost

of formwork but excluding the cost of reinforcement Rupees Six Thousand

for R.C.C work in Lintel.For Second Floor Three Hundred Fifty And

6350.68 Paise Sixty Eight Only Cu.mt.

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

25 6.00 Provinding and Laying controlled cement concrete M-

200 for reinforced concrete chhajja not exceeding

10cm thickness up to floor two level including

finishing the exposed surface with cement mortar 1:3

( 1 cement : 3 fine sand) to give a smooth surface Rupees Six Thousand

,centering and formwork and curing complete. Four Hundred Fourteen

excluding cost of reinforcement FOR RCC CHHAJJA And Paise Forty One

ALL Floor. 6414.41 Only Cu.mt.

26 24.00 Provinding and Laying controlled cement concrete M-

200 and curing etc.comp including the cost of Rupees Ten Thousand

formwork but excluding the cost of reinforcement for One Hundred Twelve

Vertical Fins All Floor 10112.02 And Paise Two Only Cu.mt.

27 60.00 Provinding and Laying controlled cement concrete M-

200 Finishing smooth with curing etc.comp including

the cost of formwork but excluding the cost of Rupees Seven Thousand

reinforcement for RCC work in SLAB for Ground Nine Hundred Sixty And

Floor 7960.82 Paise Eighty Two Only Cu.mt.

28 47.00 Provinding and Laying controlled cement concrete M-

200 Finishing smooth with curing etc.comp including

the cost of formwork but excluding the cost of

reinforcement for RCC work in SLAB for First Floor Rupees Eight Thousand

8000.11 And Paise Eleven Only Cu.mt.

29 4.00 Provinding and Laying controlled cement concrete M-

200 Finishing smooth with curing etc.comp including

the cost of formwork but excluding the cost of Rupees Eight Thousand

reinforcement for RCC work in SLAB for Second Thirty Nine And Paise

Floor 8039.40 Forty Only Cu.mt.

30 14.00 Providing and laying controlled cement concrete M-

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for Rupees Six Thousand

reinforced concrete work in STAIRCASES FOR ALL Four Hundred Nineteen

FLOOR 6419.46 And Paise Forty Six Only Cu.mt.

31 94155.00 Providing ISI Mark T.M.T. bar Fe - 500D

reinforcement for R.C.C work including bending,

binding and placing in position complete For All Rupees Seventy Seven

Floor level. 77.50 And Paise Fifty Only Kg.

32 102.00 Brick work using common burnt clay building

conventional type bricks having crushing strength not

less than 35 Kg./Sqcm. in super structure in cement

mortar 1:5 (1 cement : 5 fine sand) for Ground floor Rupees Four Thousand

including the cost of all materials and labour charges Thirty Four And Paise

etc. complete. 4034.88 Eighty Eight Only Cu.mt.

33 115.00 Brick work using common burnt clay building

conventional type bricks having crushing strength not

less than 35 Kg./Sqcm. in super structure in cement

mortar 1:5 (1 cement : 5 fine sand) for First floor Rupees Four Thousand

including the cost of all materials and labour charges Seventy Two And Paise

etc. complete. 4072.25 Twenty Five Only Cu.mt.

34 34.00 Brick work using common burnt clay building

conventional type bricks having crushing strength not

less than 35 Kg./Sqcm. in super structure in cement

mortar 1:5 (1 cement : 5 fine sand) for Second floor Rupees Four Thousand

including the cost of all materials and labour charges One Hundred Nine And

etc. complete. 4109.62 Paise Sixty Two Only Cu.mt.

35 224.00 Half brick masonry in common brunt clay building

bricks having crushing strength not less than

Kg./Sq.cm.. In cement mortar 1:4 (1cement :

coarse sand) in super structure above plinth level Rupees Six Hundred

For GROUND FLOOR Nineteen And Paise Nine

619.09 Only Sq.mt.

36 329.00 Half brick masonry in common brunt clay building

bricks having crushing strength not less than

Kg./Sq.cm.. In cement mortar 1:4 (1cement :

coarse sand) in super structure above plinth level Rupees Six Hundred Fifty

For FIRST FLOOR Six And Paise Forty Six

656.46 Only Sq.mt.

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

37 21.00 Half brick masonry in common brunt clay building

bricks having crushing strength not less than

Kg./Sq.cm.. In cement mortar 1:4 (1cement :

coarse sand) in super structure above plinth level Rupees Six Hundred

For SECOND FLOOR Ninety Three And Paise

693.83 Eighty Three Only Sq.mt.

38 492.00 Providing 15mm thick cement plaster in single coat

on brick/concrete walls for interior plastering upto

floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement: 3-sand) etc. complete. Rupees One Hundred

for Ground Floor Eighty Eight And Paise

188.98 Ninety Eight Only Sq.mt.

39 1164.00 Providing 15mm thick cement plaster in single coat

on brick/concrete walls for interior plastering upto

floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement: 3-sand) etc. complete. Rupees Two Hundred

for First Floor Fourteen And Paise One

214.01 Only Sq.mt.

40 259.00 Providing 15mm thick cement plaster in single coat

on brick/concrete walls for interior plastering upto

floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement: 3-sand) including

finishing with a flating coat of neat cement slurry etc. Rupees Two Hundred

complete. for Second Floor Thirty Nine And Paise

239.04 Four Only Sq.mt.

41 587.00 Providing 10 mm thick cement plaster in single coat

on fair side brick/concrete walls for interior plastering

upto floor two level and finished even and smooth in

cement mortar 1:3 (1 cement : 3 sand) including

finishing with a floating coat of neat cement slurry Rupees One Hundred

etc. complete for Ceiling For Ground Floor Forty One And Paise

141.92 Ninety Two Only Sq.mt.

42 745.00 Providing 10 mm thick cement plaster in single coat

on fair side brick/concrete walls for interior plastering

upto floor two level and finished even and smooth in

cement mortar 1:3 (1 cement : 3 sand) including

finishing with a floating coat of neat cement slurry Rupees One Hundred

etc. complete for Ceiling .For First Floor Sixty Nine And Paise

169.22 Twenty Two Only Sq.mt.

43 35.00 Providing 10 mm thick cement plaster in single coat

on fair side brick/concrete walls for interior plastering

upto floor two level and finished even and smooth in

cement mortar 1:3 (1 cement : 3 sand) including

finishing with a floating coat of neat cement slurry Rupees One Hundred

etc. complete for Ceiling .For Second Floor Ninety Six And Paise

196.52 Fifty Two Only Sq.mt.

44 231.00 Providing and Laying Cement Concrete 1:2:4 (1-

Cement :2-Coarse sand :4-Graded stone aggregate

20mm nominal size )laid in layer and finished with a

floating coat of neat Cement including water proofing Rupees Six Hundred One

Compound (B) 50mm thick For Sunk 601.54 And Paise Fifty Four Only Sq.mt.

45 2778.00 Providing 20 mm thick sand faced cement plaster

With Gutka Finishon walls for all height above

ground level consisting of 12mm thick backing coat

of cement mortar 1:3 (1 cement : 3 sand) and 8mm

thick finishing coat of C.M. 1:1 (1 cement : 1 sand) Rupees Three Hundred

including making necessary cornices as directed etc. Thirty And Paise Seventy

complete.For all heights 330.72 Two Only Sq.mt.

46 104.00 Providing throating or Plaster drip and moulding to Rupees Forty Five And

RCC Chhjja. 45.10 Paise Ten Only Rmt.

47 631.00 Providing 12mm wide groove/notch in plaster

including finishing the same etc.complete for all Rupees Sixteen And

height. 16.16 Paise Sixteen Only Rmt.

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

48 11.00 Providing and fixing door Double shutter having

factory fabricated std. Extruded aluminium colour

anodized hollow section19552 weight is not less than

1.1 kg/mtr {Section 63.50 x 38 mm x 2.50 mm thick }

for door frame, hollow portion of door frame shall be

filled with wood to be insert for durable grip of door

hinges, with factory made 38 mm.thick Double

Shutter Pivoted flush door With Floor Spring both

side pre 1mm laminated with 6 Lever Mortice lock,

SS Aldrop 30cm long, SS Handle size 60 Cm Long,

Rupees Eight Thousand

Tower Bolt size 20 cm etc. as per detail colour &

Seven Hundred Nineteen

pattern apporoved by this office including necessary

And Paise Thirty Three

anodized alluminum fixtures and fastenings.

8719.33 Only Sq.mt.

49 30.00 Providing and fixing door Single shutter having

factory fabricated std. Extruded aluminium colour

anodized hollow section19552 weight is not less than

1.1 kg/mtr {Section 63.50 x 38 mm x 2.50 mm thick }

for door frame, hollow portion of door frame shall be

filled with wood to be insert for durable grip of door

hinges, with factory made 35 mm.thick Double

Shutter flush door both side pre 1mm laminated with

6 Lever Mortice lock, SS Aldrop 30cm long, SS

Rupees Six Thousand

Handle size 30 Cm Long, Tower Bolt size 20 cm etc.

Three Hundred Twenty

as per detail colour & pattern apporoved by this office

Six And Paise Sixty Four

including necessary anodized alluminum fixtures and

6326.64 Only Sq.mt.

50 15.00 Providing and fixing FRP frame size 100x50 mm and

35 mm thick FRP depress panel shutter having extra

reinforcement on sides & edges in Gel coat finish.

The core of the shutter & frame is to be filed up with

injected fire retardant grade polyurethene foam done

in situ alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures. The whole

FRP frame & shutter is to be water proof weather

Rupees Two Thousand

proof, termite proof & resistance to mild acid/alkali.

Three Hundred Seventy

Rates are to be inclusive of S.S hinges with

Seven And Paise

necessary screws & alluminium fixtures & fastenings

2377.76 Seventy Six Only Sq.mt.

& fastener sleeve.

51 107.00 Providing and Fixing Alluminium Extruded Casement

Window Frame Equivalnet to Jindal Series-B,Section

No.20558,20559,20560,19391 Including 5mm Thick

Transparent Float Glass with Transparent Silicon

Sealent with Alluminium Powder Coated Fittings and

Fixtures and Fixed glass at Top as per Elevation Rupees Four Thousand

inlcluing all Labour Charges etc as per Direction By Four Hundred Fifty Six

Engineer in Charge. 4456.12 And Paise Twelve Only Sq.mt.

52 8.00 Providing and Fixing Alluminium THREE TRACK

SLIDING WINDOW WITH FIXED GLASS ABOVE:

STANDARD EXTRUDED COLOR ANODIZED

ALUMINUM SECTION EQUIVALENT TO JINDAL

SERIES C (20MM) SECTION NUMBERS: FRAME

BOTTOM TRACK 21651, FRAME TOP & SIDES

21650, SHUTTER TOP RAIL 20530, BOTTOM RAIL

20529, SIDE RAILS 20544, INTERLOCK RAILS

20531. WITH 5MM THICK TRANSPARENT FLOAT

GLASS, WITH RUBBER GASKET, AIR LOCK

STRIP AND FINISHING JOINTS WITH

Rupees Two Thousand

TRANSPARENT SILICON SEALANT, WITH

Nine Hundred Forty Six

ALUMINUM POWDER COATED FITTINGS AND

And Paise Seventeen

FIXTURES. AND FIXED GLAZING ABOVE AS

2946.17 Only Sq.mt.

SHOWN IN ELEVATION.

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

53 10.00 Providing and Fixing Fixed glass window using

standard Extruded Colour Anodized Alluminium

Section size 92x32x1.30(0.910 Kg/Rmt) Equivalent

to Jindal Frame No.20128 and Mullion Frame size

92mmx31.75x1.30(0.972 Kg/Rmt) Equivalent To

Jindal frame No 20147 with 5mm Thick Transparent

Tinted Float Glass with Rubber Gasket Finishing

joints with Transparent silicon sealent with

alluminium powder coated fittings and Fixtures etc Rupees Three Thousand

Completed as per Instruction By Engineer in Charge. Two Hundred Fifty And

3250.18 Paise Eighteen Only Sq.mt.

54 6.00 Providing and fixing standared extruded of aluminum

section of size 63mm x 38.10mm x 1.2mm (of Jindal

Section no:2434@ wt. of 0.643 kg/mt), with colour Rupees One Thousand

Powder coated alluminium frame ventilation with One Hundred Seventy

5mm thick frosted glass as details etc. complete for Five And Paise Fifty Six

Ventilation. 1175.56 Only Sq.mt.

55 138.00 Providing and Fixing Machine Cut free edges,Pre

Mirror Polished Green Marble Stone slab 16mm to

18 mm thick in single peace) for For Doors &

windows sill,jambs & Cledding as per design incl. full

moulded round front edge and 1cm both side nosing

on 20 mm thick cement mortar 1:6 (1 -cement :

coarse sand) jointed with grey cement slurry Rupees Two Thousand

including rubbing, polishing & Finishing etc. One Hundred Six And

complete 2106.86 Paise Eighty Six Only Sq.mt.

56 3630.00 Providing and fixing safety grills of Required pattern

for Windows,Door using required size of MS

polished bars at specified spacing innserted and

welded from inside to rectangular box type frame

CRC Pipes of Required Size at required spacing as

per design and hold fasting with coach bolts Rupees One Hundred

including one coat of primer and two coats of Twenty One And Paise

mattfinished oil painting etc complete. 121.18 Eighteen Only Kg.

57 66.00 Providing and laying Machine Cut free edges,

Machine polished Green Marble 16 to 18 mm thick

single peace For Stair,Steps,landing as per design

incl. full moulded round front edge and 1cm nosing

and necessary groove on trade of steps laid on

mm thick cement mortar 1:6 (1 -cement : 6 coarse Rupees One Thousand

sand ) jointed with grey cement slurry including Seven Hundred Five And

rubbing,polishing & Finishing etc. complete 1705.89 Paise Eighty Nine Only Sq.mt.

58 369.00 Providing and laying 60 cm x 60 cm SOLUBLE SALT

FULL BODY vitrified 8 mm thick tile flooring over

mm (average) base of cement mortar 1:6 ( 1 cement:

6 coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling

of existing flooring and jointed with color cement

slurry including finised with flush pointing & cleaning

the surface etc. complete (if Requaired 10% Dark Rupees One Thousand

Colour For Pattern) Coluor, Shade and pattern Four Hundred Seventy

Approved br Architect / Engineer Incharge Two And Paise Ninety

1472.91 One Only Sq.mt.

59 21.00 Providing and laying 60 cm x 60 cm SOLUBLE SALT

FULL BODY Vitrified tiles 8 to 10 mm thick in skrting

risers of steps and dedo on 10mm thick cement Rupees One Thousand

plaster 1:3 (1-cement : 3-coarse sand) and jointed One Hundred Ninety Five

with white cement slurry. 1195.02 And Paise Two Only Sq.mt.

60 32.00 Providing and laying 60 cm x 60 cm Matt antiskit

porcelin 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling Rupees One Thousand

of existing flooring and jointed with color cement Four Hundred Seventy

slurry including finised with flush pointing & cleaning Two And Paise Ninety

the surface etc.complete 1472.91 One Only Sq.mt.

61 16.00 Providing and laying 30 cm X 30 Cm matt finished

antiskid Ceramic tiles 6mm thick in flooring treads of

steps and landing laid on a bed of 12mm thick Rupees One Thousand

cement mortar 1:3 (1-cement : 3-coarse sand ) Seventeen And Paise

finishing with flush pointing in white cement. 1017.30 Thirty Only Sq.mt.

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

62 234.00 Providing and laying coloured glazed tiles of the size

300 mm x 600 mm & 8 mm in inskirting, risers of

steps and dedo on 10 mm. thick cementplaster 1:3 Rupees One Thousand

(1 cement : 3 coarse sand) & jointed with white Five Hundred Fifty Nine

cement slurry 1559.10 And Paise Ten Only Sq.mt.

63 19.80 Providing and laying 120 cm x 30 cm READY MADE

FULL BODY VIRTRIFIED STEPTILES 10 TO 12mm

thick tile in tread of steps laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with flush pointing in white cement with anti- Rupees One Thousand

skid flutes in place on thread. Coluor, Shade and Four Hundred Seventy

pattern Approved by Architect / Engineer Incharge Two And Paise Ninety

1472.91 One Only Sq.mt.

64 10.35 Providing and laying 120 cm x 15 cm READY MADE

FULL BODY VIRTRIFIED STEPTILES 10 TO

mm thick tile in Riser of steps laid on a bed of 12 mm

thick cement mortar 1:3 (1-cement : 3-coarse sand ) Rupees One Thousand

finishing with flush pointing in white cement. Coluor, Four Hundred Seventy

Shade and pattern Approved br Architect / Engineer Two And Paise Ninety

Incharge 1472.91 One Only Sq.mt.

65 16.20 Providing and laying 60 cm x 60 cm FULL BODY

VIRTRIFIED STEPTILES 10 to 12 mm thick tile

flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring Rupees One Thousand

and jointed with color cement slurry including finised Four Hundred Seventy

with flush pointing & cleaning the surface with half Two And Paise Ninety

round nosing on landing. etc.complete 1472.91 One Only Sq.mt.

66 4.00 Providing and laying 60 cm x 60 cm FULL BODY

VIRTRIFIED TILES 10 to 12 mm thick in skirting riser Rupees One Thousand

of steps and dedo on 10 mm thick cement plaster 1:3 Four Hundred Seventy

( 1 cement: 3 coarse sand) and jointed with white Two And Paise Ninety

cement slurry. 1472.91 One Only Sq.mt.

67 387.00 Providing and laying water proofing tretment with

chaina mosaic tiles flooring over avg 40 mm C.C.

1:2:4 {1 Cement : 2 sand : 4 Kapachi / Gritt 6 to

mm size} bedding for maintaining slope for plain and

curve surface & 12 mm to 20 mm of broken piece of

seramic / glazed tiles ( one for more color as directed

) to be laid over cement mortar bedding of C M 1:3 (1

cement : 3 sand ) containg one Kg of water profing

materials per bag of O P C at plain or / and slops

and to be tempered to bring mortar eramic up to

surface with using white cement and colour pigment

including rounding of junctions and extending them

up to 15 cm along the wall and curing with bends any

pattens or design as per drawing and cleaning by

Rupees One Thousand

using oxalic acid etc complete.

Eighty Four And Paise

1084.17 Seventeen Only Sq.mt.

68 8.00 Providing and laying Machine Cut free edges,

Machine polished black Granite Marble Stone slab

18 mm thick (single piece not more thane 1.5mtr) for

Top of basin for drinking water other necerry place

as per design incl. full moulded round front edge and

1cm nosing and necessary groove laid on 20 mm

thick cement mortar 1:6 (1 -cement : 6 coarse sand Rupees Two Thousand

) jointed with grey cement slurry including One Hundred Thirty Eight

rubbing,polishing & Finishing etc. complete And Paise Seventeen

2138.17 Only Sq.mt.

69 3.00 Providing and laying Both Side machine Double Side

Polished Black Granite Stone slab 1 18 mm thick

average thick of approved quality incl. full moulded Rupees One Thousand

round front edge fixed in wall for Partition and jointed Nine Hundred Seventy

with white cement slurry including rubbing,polishing Eight And Paise Fifty

& Finishing etc. complete 1978.59 Nine Only Sq.mt.

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

70 2716.00 Wall painting (Two coats) with plastic emulsion paint

of approved brand and manufacture on undecorated

wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth. including Applying two coats of

Birla or Asian acrylic lapy ( putty) & two coats of

primer of approved brand and manufacture on new

wall surface to give an even shade including

Rupees One Hundred

thoroughly brushing the surface free from mortar

Twenty Eight And Paise

dropping and other foreign matter and sand papered

128.98 Ninety Eight Only Sq.mt.

71 1956.00 Wall painting (Two coats) with plastic emulsion paint

of approved brand and manufacture on undecorated

wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth. including Applying two coats of

Birla or Asian acrylic lapy ( putty) & two coats of

primer of approved brand and manufacture on new

wall surface to give an even shade including

Rupees One Hundred

thoroughly brushing the surface free from mortar

Thirty Four And Paise

dropping and other foreign matter and sand papered

134.76 Seventy Six Only Sq.mt.

smooth. on ceiling and Soffits of slab

72 4162.00 Wall painting two coats with weather proof acralic

emulsion APEX type paint of approved brand &

manufacture and of required shade on exterior wall

surface to give an even shade over and including a

primery coat with alkaly resistance primer of

approved brand after throughly brushing surface to Rupees One Hundred

remove all dirt and remains of loose powdered Twenty Two And Paise

materials etc comp. for all height. 122.14 Fourteen Only Rmt.

73 36.00 Providing and fixing 90 cm high Stainless steel

railing 316 Grade made from anticorrocive S S pipe

of 50 mm dia (16Gauge) as hand rail with S S

mm dia (16Gauge) as a vertical support fixed in RCC

slab at 1.2m c/c including three horizontal S S

pipes of 16 mm dia (16Gauge) at eqal distance

fixed by 18.75 mm dia (16Gauge) S S pipe including Rupees Three Thousand

accessories as per detailed drawing as directed etc. Six Hundred Fifteen And

complete. 3615.80 Paise Eighty Only Rmt.

74 90.00 Providing laying and jointing in true line and level

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the Rupees One Hundred

same with adhesive solvent, including cost of all Forty Eight And Paise

materials. 148.12 Twelve Only Rmt.

75 70.00 Providing laying and jointing in true line and level

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all Rupees Ninety One And

materials. 91.84 Paise Eighty Four Only Rmt.

76 50.00 Providing laying and jointing in true line and level

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with Rupees Seventy Two

adhesive solvent, including cost of all materials. And Paise Sixty Five

72.65 Only Rmt.

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

77 20.00 Providing and fixing PVC SWR Nahni trap IS

for drain - 75 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I Rupees Six Hundred One

scread down or hinged grating including the cost of And Paise Ninety Four

cutting and making good the walls. 601.94 Only Nos.

78 8.00 Providing and fixing S.W. gully trap with C.I. grating

brick masonary chamber and water tight C.I. cover Rupees One Thousand

with frames of 300mm x 300mm size (Indian) with Two Hundred Forty Six

standard weight (i) square mouth traps (ii) 150mm x And Paise Ninety Two

100mm size 'P' or R type. 1246.92 Only Nos.

79 12.00 Providing and fixing screw down bib taps of following Rupees One Hundred

size.(A) Brass screw down bib tap polished Eighty Six And Paise

bright. (i) 15mm dia. 186.83 Eighty Three Only Nos.

80 12.00 Providing and fixing chromium plated brass half trun

type Flush cock of approved quality including fixing in Rupees Two Hundred

pipe line etc. complete. Sixty Three And Paise

.(ii) 25mm dia. 263.77 Seventy Seven Only Nos.

81 6.00 Providing and fixing Table top wash basin of Size

610x450mm (Brand Varmora or equivalent) with C.P.

brass waste for washbasin or sink. & 32mm pillar

tap, Bottal trap capstan head, screw down high Rupees Nine Thousand

pressure with screws, shanks and back nuts. (i) Three Hundred Thirty

32mm dia. Providing and fixing brass screw down And Paise Thirty Eight

stop tap. (A) 32mm dia.. 9330.38 Only Nos.

82 2.00 Providing and fixing water closet squatting pan (

Indian type W.C. Pan of Hindustan, Cera,

Parrywareor, hindware,) or equivalent size 580 mm Rupees One Thousand

including 100mm size P or S trap for water closet Four Hundred Twenty

squatting pan including jointing the trap with the pan Five And Paise Twenty

and soil pipe in cement mortar 1:1 etc.complete. 1425.25 Five Only Nos.

83 5.00 Providing and fixing standard EWC WALL HUNG

pan including fixing seat cover (Soft close) Chair

brakets, jet spray and metrofall flush cock of best

quality with all required necessary fixures and Rupees Fifteen

fastners including labour and material etc. complete Thousand Fifty Three

as per directed by engineer in charge. 15053.04 And Paise Four Only Nos.

84 4.00 Providing and fixing Wall Hung fitting for urinal

approoved quality including conection the urinal with

waste pipie tap etc complete. (A) White earthenware

flat back or corner type size of size 430 x 260 x

mm of y including fixing of CP brass waste pipe & Rupees One Thousand

15mm brass stop tap including cost of all materials & One Hundred Forty Two

labour charges etc. comp (Hindustan, Cera, And Paise Seventy

Parrywareor, hindware,)or equivalent. 1142.77 Seven Only Nos.

85 1.00 Providing and fixing special nees Range Cruse set,

EWC, 710 X370X810 MM, New Cat No : S1021113

S trap, s1021114 P trap, S1060106 Cistern

B1520118 Soft Close seat cover, B 1810112 Twin

flush fittings, S2040101 Wash Basin 510 x 400 mm,

F9030451 Spatula lever basin mixer, B2210106

Wall mounted grab bar 600 mm long, B2210108 Rupees Fifty Six

Wall Mounted hinged rail 750 x 750 mm (Cera or Thousand Seven

equivalent) etc completer as directed/as per detailed Hundred Eighty Two And

drawing by Architect office. 56782.20 Paise Twenty Only Nos.

86 10000.00 Providing erecting and fixing double coated syntex or

equivalent PVC(ISI) mark water tank of required

capacity each with all necessary fittings and Rupees Three And Paise

connection etc.complete on terrace. 3.95 Ninety Five Only Liter

87 6.00 Providing and fixing 600 mm x 450 mm beveled

edge mirror of superior glass mounted on 6 mm

thick A.C sheet or plywood sheet or PVC framing and Rupees Eight Hundred

fixed to wooden plugs with C.P. brass screw and Fifty Nine And Paise

washers. 859.41 Forty One Only Nos.

88 6.00 Providing and fixing C.P. brass towel rail complete Rupees Six Hundred

with C.P. brass brackets fixed to wooden plugs with Sixteen And Paise Forty

C.P. brass screws (B) 600 mm X 20mm size.. 616.42 Two Only Nos.

89 6.00 Providing and fixing 600mm x 120mm glass shelves

with C P Brass brackets and guard rail complete Rupees Five Hundred

fixed to wooden plug with CP Brass Seventy And Paise Forty

screw.etc.complete. 570.45 Five Only Nos.

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

90 5.00 Providing and fixing Gun metal check or non-return Rupees Four Hundred

fullway wheel valve.(E) 25 mm dia. Twenty And Paise Sixty

420.63 Three Only Nos.

91 5.00 Providing and fixing Gun metal check or non-return Rupees Six Hundred

fullway wheel valve.(E) 40mm dia. Sixty Three And Paise

663.43 Forty Three Only Nos.

92 40.00 Providing laying and jointing in true line and level

UPVC SWR pipe Type B pipe confirming to IS

-1992 with one end plain and other end socketed

with rubbering & fitting confirming to ISI 14735-1999

of approved make for drainage system pipe line,pipe

shall be jointed with each other with rubber

lubricant,pipe shall be fixed on wall using of PVC

clamp of the size 160mm diameter x 210mm lenght x

196mm high at every 2000mm center to center or

shall be concealed in wall as directed including

necessary fitting such as bends,shoes etc. including

Rupees Seven Hundred

testing of pipe and joints and jointed with adhesive

Ninety Seven And Paise

solvent cement including cost of all materials.75 mm

797.98 Ninety Eight Only Rmt.

93 215.00 Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc. Rupees Three Hundred

including making good the wall ceiling and Thirty Nine And Paise

floor.(G)110 mm 339.05 Five Only Rmt.

94 70.00 Providing, laying and jointing in true line and level

110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 110 mm diametre x 149 mm

length x 145 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes

Rupees Nine Hundred

etc. including testing of pipes and joints and jointed

Eighteen And Paise Sixty

with adhesive solvent cement including cost of all

918.67 Seven Only Rmt.

95 80.00 Providing, laying and jointing in true line and level

160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 160 mm diametre x 210 mm

length x 196 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes

Rupees Eight Hundred

etc. including testing of pipes and joints and jointed

Thirty Four And Paise

with adhesive solvent cement including cost of all

834.38 Thirty Eight Only Rmt.

96 9.00 Provinding and Fixing in position cowel vent to pipe Rupees Three Hundred

75mm dia as directed. Ninety Three And Paise

393.04 Four Only Nos.

97 9.00 Provinding and Fixing in position cowel vent to pipe Rupees Five Hundred

100mm dia as directed. Five And Paise

505.17 Seventeen Only Nos.

98 50.00 Providing laying (to level or slopes) and jointing

reinforced concrete Light duty non-pressure pipes

I.S. class NP2 of the following internal diameter with Rupees Six Hundred

collars and butt ends prepared for collar joints Seventy Seven And

including testing of joints complete.(B) 300 677.94 Paise Ninety Four Only Rmt.

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

99 9.00 Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 C.I. cover with frame (Light duty)

455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating

Rupees Two Thousand

coat of neat cement on walls and bed concrete etc.

Nine Hundred Thirty Two

complete.(i) Inside dimensions 455mmx 610mm and

And Paise Ninety Three

450mm deep for single pipe line.

2932.93 Only Nos.

100 9.00 Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 C.I. cover with frame (Light duty)

455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

Rupees Three Thousand

complete.(i) Inside dimensions 500mmx 700mm and

Six Hundred Sixty And

450mm deep for pipe line with one or more inlet

3660.76 Paise Seventy Six Only Nos.

101 12.00 Providing and filling with good quality sinder (steam

coal) as directed by engineer in charge in sunks in

layers of 15 cm thk, including watering, placing, Rupees Eight Hundred

ramming well etc. as directed. Thirty Five And Paise

835.67 Sixty Seven Only Cu.mt.

102 20.00 Providing and fixing in position 300mm high,150mm

wode English/Gujrati letters made from 1.0mm thick

stainless steel sheet as directed by Engineer in

charge with all material,hardware, accessories and Rupees Seven Hundred

fitting etc.complete. 707.00 Seven Only Nos.

103 20.00 Providing and fixing in position 150mm high,

English/Gujrati letters made from 1.0mm thick

stainless steel sheet as directed by Engineer in

charge with all material,hardware,accessories and Rupees Four Hundred

fitting etc.complete. 404.00 Four Only Nos.

104 4.00 Constructing Sandwich Platform of 18 mm thick

Polished Black or selected Granite at top and 25 mm

thick Kota stone slab With 75CM height with

necessary Support using 20mm thick cement mortar

1:3 for sandwich and fitting at bottom & edges with

waterproof rigid adhesives including making

necessary grooves in walls with Vertical support of

double Kota stone sandwich every 60 cm centre to

centre including all labour material of approved

quality including full moulded round front edge fixed

Rupees Three Thousand

in wall for partition and jointed with grey cement

Six Hundred Thirty And

slurry including rubbing and polishing etc. complete

3630.95 Paise Ninety Five Only Sq.mt.

105 360.00 Providing and fixing pre-cast Rubber Dye / steel Dye

inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand

layer for levelling and filling the joint with sand in Rupees Seven Hundred

proper line and level as per guidlines of IRC : SP 63- And Paise Seventy Four

2018 etc. Complete. 700.74 Only Sq.mt.

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

106 3.00 Constructing Manhole with R.C.C. top slab in 1:2:4

mix (1-cement :2-coarse sand : 4-graded stone

aggregate 20mm nominal size) foundation concrete

1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats

+ 50mm size) inside plastering 15mm thick with

Cement Mortar 1:5 (1-Cement : 5-coarse sand)

finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-

Cement :2-Coarse sand :4-stone aggregate 20mm

nominal size) finished smooth complete including

curing and festing (i) Inside size 900mm x 1200mm

and 1.5M. deep including C.I. cover with frame size

560mm diameter total weight of cover and frame to

be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.)(A) With 230mm thick walls of Rupees Twenty Three

brick msonry using brick having crushing strength Thousand Four Hundred

not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 Seventy And Paise Forty

(1- Cement: 5-Coarse sand) (3) C type depth 2.25 23470.48 Eight Only Nos.

107 140.00 Metre for 150mm

Providing diameter

and fixing 50mmsewer.

Dia "Z" Clamp as per Rupees One Hundred

direction. Forty One And Paise

141.40 Forty Only Nos.

108 30.00 Providing and Fixing Acrylic Name Plate as per Rupees Three Hundred

direction of Engineer in charge of Size having Fifty Three And Paise

300mm x 100mm etc. compl. 353.50 Fifty Only Nos.

109 15.00 Demolition including stacking of serviceable Rupees One Thousand

materilas and disposal of unserviceable materials One Hundred Thirty

with all lead and lift. (i) R.C.C. work Three And Paise Eighty

1133.89 Nine Only Cu.mt.

110 28.00 Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and Rupees Five Hundred

lift.(ii) In Cement Mortar. Eighty Nine And Paise

589.70 Seventy Only Cu.mt.

111 1.00 Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves,

holdfasts and other attachment etc. complete and

stacking them within all lead and lift.(ii) Exceeding 3 Rupees Two Hundred

Sq.M. in area. Sixty Nine And Paise

269.48 Forty Eight Only Sq.mt.

112 113.00 Providing corrugated PPGL Sheets roofing fixed with

Galvanized iron 'J' or 'L' hooks bolts and nuts 8 m.

diameter with bitumen and G.I.Limpet washers filled

with white lead complete including ridges, gutters etc.

excluding the cost of purlins, rafters and trusses. Rupees Nine Hundred

(1) 0.60 mm. Thick sheet Ninety Three And Paise

993.84 Eighty Four Only Sq.mt.

113 39.00 Steel work, welded in built up sections framed work

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint. (A)In

beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and Rupees Nine Thousand

cross beams. Hip and jack rafters, purlins conneted One Hundred Eight And

to common rafters and the like 9108.48 Paise Forty Eight Only Sq.mt.

114 248.00 Providing and Fixing Rajor Coil Wire fencing Having

diameter of 0.75 mt including using of M.S Angle

40x40x5mm as per Detail drawing,Fixing in Cement

Concrete M-200 ect Completed with One Coat of

primer & two coats of oil paint to M.S Angle ec. Rupees Six Hundred Fifty

Complete as directed by Engineer in Charge. 656.50 Six And Paise Fifty Only Rmt.

115 18.00 Providing & fixing 84 mm wide, 16mm deep, length

upto 5 m. Made of galvanised steel 0.55 mm &

mm aluminium-TCT. Carrier made of galvanised

steel 0.6 mm, aluminium 0.91 mm thk stove

enameled, with corrosion resistive super durable

powder coating both sides including all labour & Rupees Two Thousand

material in opening of duct. As approved by architect Two Hundred Twenty

and engineer incharge 2222.00 Two Only Sq.mt.

116 88.00 Providing cement vata (10cm. x 10 cm. size) quarter

round in cement mortar 1:1 including neat cement Rupees Twenty Four And

finishing, watering etc. complete. 24.28 Paise Twenty Eight Only Rmt.

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

117 204.00 Removing and scraping of old deteriorated plaster of

any thickness fromm wall / R.C.C member including

stacking of serviceable material and disposal of Rupees Twenty And

unserviceable from site of work with all lead and lift 20.84 Paise Eighty Four Only Sq.mt.

118 15.00 Providing and laying cement concrete 1:3:6 (1-

Cement : 3- Coarse sand : 6- crushed stone

aggregates 20 mm nominal size) and curing Rupees Three Thousand

complete including cost of formwork in (A) Wall Caps Nine Hundred Nine And

/ Coping 3909.60 Paise Sixty Only Cu.mt.

119 8.00 Providing and Construction of Junction chambers of

Clear size 0.35 x 0.35 x 0.60 mt. including

Excavation, Cement concrete (1:2:4),Half brick

masonary (1:4),15mm thick plaster C.M.(1:4) &

Cement concrete flooring connecting of rainwater Rupees One Thousand

pipe as per detailed drawing and as directed by Four Hundred One And

Engineer in charge 1401.88 Paise Eighty Eight Only Nos.

120 1.00 Providing and constructing filter chamber of clear

size 2.06 x 1.21 x 1.20 mt. with necessary

Excavation, Cement concrete (1:2:4) bed Concrete of

0.125 Mt Thick ,Brick work in Cement Mortar(1:6)

,Half brick masonary C.M - (1:4),15mm thick plaster

C.M.(1:3) , 10 Cm thick R.C.C. (1:2:4) top Cover with

Reinforcement Cast Iron Cover with filling the pit

mm to 40 mm Kapachi for 0.30 Mt. Depth and

Course sand in layer for 0.90 mt depth including

Rupees Thirteen

connecting rain water pipes as per detailed drawing

Thousand Five Hundred

and as directed by Engineer in charge including cost

Seventy Nine And Paise

of labour and material.

13579.45 Forty Five Only Nos.

121 1.00 Providing water harvesting pit of 2.00 mt x 2.00 mt

And 4.00 mt. depth with excavation in any strata

upto 4.0 mt depth, filling the pit with B.T.Metal

mm in 0.60 mt. depth ,B.T. Metal 25-40mm kapachi

for 0.30 mt. depth ,10-20 mm kapachi for 0.30 mt

Depth and 2.0 mt. depth with coarse sand in layers

including making P.V.C. line for water inlet etc. as

directed with 250mm dia bore 35 mt. depth and Rupees Fifty Two

150mm dia P.V.C.Strainer / Slotted pipe of 10 Kg. Thousand Eight Hundred

f/Cm2 As required as directed instruction of Sixty Eight And Paise

Engineer in Charge. 52868.45 Forty Five Only Nos.

122 357.00 Box cutting the road surface to proper slope and

camber for making a base for road work including Rupees One Hundred

removing the excavated stuff and depositing on the Fourteen And Paise Forty

road side slops as directed upto 50 Mt. lead 114.44 Four Only Cu.mt.

123 107.00 Providing and laying compacted W.B.M. 150 mm

thick of machine crushed B.T. metal of size 45 mm to

63 mm with using 0.12/ cmt./10 Smt stone

screenings as filler and binding material 0.06 cum./ Rupees One Thousand

10 Smt. including spreading, watering & Four Hundred Sixty Five

consolidation by vibratory roller etc complete. 1465.51 And Paise Fifty One Only Cu.mt.

124 143.00 Providing and laying in position Ready Mix M-300

grade Controll concrete with ironite material 4 Kg. /

Sqm for reinforced cement concrete work, using

cement content as per approved design Mix

manufactured in fully aautomatic batching plant and

transported to site of work in transit mixer for lead up

to 10 kkms having continous agitated mixer,

manufactured as per mix design of specified grade

for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying,

excluding the cost of centering shuttering finishing

and reinforcement including cost of admixtures in

recommanded prportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and durability

as per direction of the Engineer in charge Without Fly

Ash (Min cement level as per latest IS 456 shall be Rupees Six Thousand

maintained) (Cement level 410 Kg.) including labour Seventy One And Paise

charges for Trimix process,it is flooter,surface 6071.11 Eleven Only Cu.mt.

vibrator,Vacume etc complete.

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

125 9721.00 Providing TMT Bar FE 500D reinforcement for Rupees Seventy Seven

R.C.C. work including bending, binding and placing And Paise Twenty Nine

in position complete upto floor two level 77.29 Only Kg.

126 107.00 Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector

Rupees Five Hundred

(f) with medium class Rigid PVC pipe and

Eighty Two And Paise

accessories erected concealed in wall/ceiling

582.77 Seventy Seven Only Pts.

complete Cat. III

127 37.00 Point wiring for FAN with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

Rupees Eight Hundred

accessories erected concealed in wall/ceiling

809.01 Nine And Paise One Only Pts.

complete Cat. III

128 27.00 Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following Rupees Three Hundred

type accessories Cat-III 309.06 Nine And Paise Six Only Pts.

129 Providing following type of Modular Type Accessories

mounted with pvc / metallic box, single mounting

base frame covered with textured / metallic front

plate , modules erected with necessary connection.

As desired by Engineer In charge

27.00 (1)One No. SP 6 Amp.Cat. III Rupees One Hundred

Fifty One And Paise Fifty

151.50 Only Nos.

27.00 (2) One No 5 pin plug Cat. III Rupees One Hundred

Fifty One And Paise Fifty

151.50 Only Nos.

15.00 (3) Two Pin/RJ-11 Telephone Socket [B] For Two Rupees One Hundred

Gang Cat-III Sixty And Paise Fifty

160.59 Nine Only Nos.

60.00 (7) Blank Plate Single Cat.III Rupees Twenty Five And

25.25 Paise Twenty Five Only Nos.

18.00 (8) Computer RJ-45 socket Cat. III Rupees One Hundred

Sixty And Paise Fifty

160.59 Nine Only Nos.

17.00 (9) 16 Amp. SP one way switch Cat. III Rupees One Hundred

Eighty And Paise

180.79 Seventy Nine Only Nos.

17.00 (10) 6/16Amp. Universal socket Cat. III Rupees One Hundred

Ninety Nine And Paise

199.98 Ninety Eight Only Nos.

130 Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in approved

manner as directed

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

Rupees Twenty Four And

24.24 Paise Twenty Four Only Mtr.

Rupees Thirty Three And

33.33 Paise Thirty Three Only Mtr

131 975.00 Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated stranded wire

of green colour for earth continuity of following size Rupees One Hundred

(A) with medium class Rigid PVC pipe and Four And Paise Three

accessories (b) 2 wire 2.5 sq. mm 104.03 Only Mtr.

132 providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected

in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A)

with medium class Rigid PVC pipe and accessories

300.00 (a) 2 wire 4 sq. mm Rupees One Hundred

Forty And Paise Thirty

140.39 Nine Only Mtr

125.00 (b) 2 wire 6 sq. mm Rupees One Hundred

Eighty Four And Paise

184.83 Eighty Three Only Mtr.

50.00 (h) 4 wire 6 sq. mm Rupees Three Hundred

Twenty Six And Paise

326.23 Twenty Three Only Mtr.

133 providing and erecting Mains with ISI marked, 1.5KV

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing

pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and

bolts if required.

50.00 (f) One wire 10.00 sq. mm Rupees One Hundred

Fifteen And Paise

115.14 Fourteen Only Mtr.

50.00 (g) One wire 16.00 sq. mm Rupees One Hundred

Seventy Seven And

177.76 Paise Seventy Six Only Mtr.

15.00 (i) One wire 35.00 sq. mm Rupees Three Hundred

Seventy Six And Paise

376.73 Seventy Three Only Mtr

15.00 (j) One wire 50.00 sq. mm Rupees Five Hundred

Eighty Eight And Paise

588.83 Eighty Three Only Mtr

134 Supplying and erecting Flexible PVC insulated multi

strand multi core 1.1 kv grade ISI marked copper

wires of following size to be erected as directed.

120.00 (d) 1.50 Sq.mm 2 core round PVC sheathed Rupees Thirty Nine And

39.39 Paise Thirty Nine Only Mtr

114.00 (e) 1.50 Sq.mm 3 core round PVC sheathed Rupees Fifty Eight And

58.58 Paise Fifty Eight Only Mtr

135 Supplying & erecting approved make Telephone

Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC

tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming to C-

DOT erected in existing pipe. of following size of

conductors & nos.of pairs. With necessary

[A] Conductor Size 0.5 mm

600.00 (2) Two Pairs Rupees Twenty And

20.20 Paise Twenty Only Mtr

150.00 (5) Ten Pairs Rupees Sixty Five And

65.65 Paise Sixty Five Only Mtr

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

136 2.00 Providing & erecting main Distribution (MDF) indoor Rupees Nine Hundred

type, back mounted frame as per DoT standard Ninety Four And Paise

approved with krone strips (a) Suitable for 10 pair 994.85 Eighty Five Only Nos

137 720.00 Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction [C] Rupees Forty Seven And

CAT - 6 47.47 Paise Forty Seven Only Mtr

138 18.00 Providing & erecting Switch board for Computer or

electric apparatus consisting of following modular

type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

covered with textured/metallic /white front

plate,modules erected with necessary connections

1 no. 6A/16A universal plug-switch combined. Rupees One Thousand

3 nos. 6A Switch One Hundred Thirty

3 nos. 6A 5 pin Plug For Modular Type Three And Paise Twenty

Accessories Cat-III 1133.22 Two Only Nos.

139 6.00 Decorative call bell Ting-tong box type 250 volts Rupees Seventy One

complete erected And Paise Seventy One

71.71 Only Nos.

140 85.00 Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor

more than 0.9, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

shown.) Rupees Three Hundred

(A) Tube Light with integral driver Seventy Three And Paise

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 373.70 Seventy Only Nos.

141 18.00 feet Cat-III and erecting led lamps with following

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser Rupees One Hundred

suitable LAMP holder Twelve And Paise Eleven

(ii) 5 to 8 watts 112.11 Only Nos

142 Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)

16.00 (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection. Rupees Five Thousand

(iii) 60 - 89 watts Eighty And Paise Thirty

Cat-lll 5080.30 Only Nos

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

6.00 (B) Flood Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection. Rupees Seven Thousand

(v) 120 - 159 watts One Hundred Eighty Six

Cat-lll 7186.15 And Paise Fifteen Only Nos

2.00 (C) Post Top Lantern LED fitting comprises of finish

cast aluminum spigot and spun aluminum canopy

fixed with opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories wired up to

terminal block.IP 65 Rupees Four Thousand

(ii)32-40W Ninety Six And Paise

Cat-lll 4096.56 Fifty Six Only Nos

143 5.00 Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal

& magnetic release suitable to work on A.C. supply Rupees Six Thousand

50 c/s. with all internal connections, spreader tinned Seven Hundred Ninety

copper & complete erected in existing 16 G.M.S. And Paise Twenty Three

housing. ICS=100% of ICU only Cat III 6790.23 Only Nos.

144 2.00 Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with Fixed thermal & magnetic

release suitable to work on A.C.supply 50 c/s. with all Rupees Eight Thousand

internal connections, spreader tinned copper & Eight Hundred Sixty One

complete erected in existing 16 G.M.S. housing. And Paise Seventy Four

ICS=100% of ICU only Cat III 8861.74 Only Nos.

145 1.00 Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal & magnetic

release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & Rupees Seventeen

complete erected in existing 16 G.M.S.housing Thousand Eight Hundred

ICS=100% of ICU only Cat III Forty Three And Paise

17843.67 Sixty Seven Only Nos

146 1.00 Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal & magnetic

release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & Rupees Nineteen

complete erected in existing 16 G.M.S.housing Thousand Six Hundred

ICS=100% of ICU only Cat III (with encloser Twenty Eight And Paise

for mounting of MCCB) 19628.04 Four Only Nos

147 Supplying & erecting approved make Four Pole 415V

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS

1.00 (A)32-40A Rupees Two Thousand

Cat-lll Six Hundred Eleven And

2611.86 Paise Eighty Six Only Nos

1.00 (D)200A Rupees Twelve

Cat-lll Thousand Two Hundred

Forty One And Paise

12241.20 Twenty Only Nos

148 3.00 Supplying and erecting triple pole & neutral 440V /

500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour

insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus

bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary Rupees Three Thousand

connections. Two Hundred Two And

(B) Suitable for 200 Amp. capacity 3202.71 Paise Seventy One Only Rn.Mtr

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

149 24.00 providing and erecting Miniature circuit breaker single

pole 0.5A to 2A system and having breaking capacity

10 KA to be erected in existing box. confirming to IS Rupees Two Hundred

8828/1996 with ISI Mark Ninety Seven And Paise

Cat.III 297.95 Ninety Five Only Nos.

150 86.00 providing and erecting Miniature circuit breaker single

pole 6A to 25A suitable to operate on 240 V A.C.

system and having breaking capacity 10 KA to be Rupees One Hundred

erected in existing box. confirming to IS 8828/1996 Twenty Three And Paise

with ISI Mark Cat-III 123.22 Twenty Two Only Nos.

151 2.00 Providing & erecting 415 V MCB Four Pole for Motor

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having Rupees Six Hundred Fifty

following capacity Five And Paise Forty

(a) 6 to 32 Amp. Cat.III 655.49 Nine Only Nos.

7.00 (b)40 Amp Cat-III. Rupees Seven Hundred

Thirty Six And Paise

736.29 Twenty Nine Only Nos.

152 15.00 Providing & erecting 240 V MCB double pole switch

for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing Rupees Three Hundred

box having following capacity Sixty Two And Paise Fifty

(B) 40 Amp. Cat.III 362.59 Nine Only Nos.

153 0.00 Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be

used) suitable for

5.00 (A) single phase incoming and horizontal single Rupees One Thousand

phase outgoing Four Hundred Ninety

(b) sheet steel double door (IP-43) Two And Paise Seventy

(iv)12 way 1492.78 Eight Only Nos.

2.00 (B) three phase incoming and single phase horizontal

type outgoing Per phase isolation type (PPI) Rupees Three Thousand

(b) sheet steel double door Four Hundred Twelve

(iii) 8 Way And Paise Seventy Nine

3412.79 Only Nos.

154 providing and erecting Approved make ELCBs /

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single

phase 240 V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not

incorporate any electronic component. for following

Max. rating erected as directed

11.00 (ii) 40Amps. DP Cat-III Rupees Two Thousand

Four Hundred Fifty Eight

And Paise Thirty Four

2458.34 Only Nos

155 10.00 Providing and erecting Annealed bare Copper wire 8 Rupees Seven Hundred

to 16 SWG. Ninety Four And Paise

794.87 Eighty Seven Only Kg

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

156 2.00 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge

dissipation suitable for following type of applications

with chamber and heavy duty cover.(approved make

OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 / meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable

to retain moisture for long time Necessary test report

must be submitted.

(a) For Electrical Installation up to 440V in normal soil Rupees Four Thousand

Length of pipe - 1 Mtr Five Hundred Ninety One

Back filling compound - 1 Nos Bag of 15 Kg. 4591.46 And Paise Forty Six Only Nos.

157 Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus &

earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall

be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus

bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be

supplied with following approved manufacturers with

following size.

4.10 (B) The standard companies switch gear shall be Rupees Fourteen

used and only manufacturers at CPRI approved Thousand Nine Hundred

factory Two And Paise Fifty Five

(i) with 350 mm depth 14902.55 Only Sq.Mtr

158 10.00 Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth Rupees Three Hundred

pit complete with necessary 8 SWG earth wire. Sixty Eight And Paise

368.65 Sixty Five Only Nos

159 10.00 For using salt and charcoal / coke as required for Rupees One Hundred

pipe type earthing. Seventy One And Paise

171.70 Seventy Only Nos

160 50.00 Providing , erecting , fabricating the M.S. structure as

per requirement on site incorporating proper size of

M.S. angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding &

finishing duly painted with one coat of red oxide with

erection on site as per direction of engineer in charge Rupees Seventy Seven

with necessary grouting, cementing, plastering & And Paise Seventy

finishing complete. 77.77 Seven Only kg

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

161 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables

15.00 (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) Rupees Five Hundred

Eighty Nine And Paise

589.84 Eighty Four Only Mtr

100.00 (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) Rupees Six Hundred

Forty Eight And Paise

648.42 Forty Two Only Mtr

162 Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables

480.00 (B) 4 core 6 Sq. mm Rupees One Hundred

Fifty One And Paise Fifty

151.50 Only Mtr

90.00 (C) 4 core 10 Sq. mm Rupees One Hundred

Sixty Eight And Paise

168.67 Sixty Seven Only Mtr

163 330.00 Making trench in soft soil of suitable width of 90 cm

deep for laying cable or locating the fault all over the

run and back filling the same and making the surface Rupees Fifty Five And

as normal ground. 55.55 Paise Fifty Five Only Mtr

164 Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

32.00 (B) 2 to 4 core 6 Sq. mm Rupees Thirty Eight And

38.38 Paise Thirty Eight Only Nos

2.00 (C) 2 to 4 core 10 Sq. mm Rupees Thirty Eight And

38.38 Paise Thirty Eight Only Nos

165 Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of

2.00 (D) 3 & 1/2 core 95 Sq. mm Rupees One Hundred

Thirty One And Paise

131.30 Thirty Only Nos.

2.00 (E) 3 & 1/2 core 120 Sq. mm Rupees One Hundred

Forty And Paise Thirty

140.39 Nine Only Nos.

166 Solder less crimping type Aluminium lugs conforming

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner.

128.00 (A) 1.5/ 2.5/4/6 Sq.mm Rupees Six And Paise

6.06 Six Only Nos

8.00 (B) 10 Sq.mm Rupees Thirteen And

13.13 Paise Thirteen Only Nos

2.00 (D) 35/50 Sq.mm. Rupees Twenty And

20.20 Paise Twenty Only Nos

2.00 (E) 70 Sq.mm. Rupees Twenty Five And

25.25 Paise Twenty Five Only Nos

6.00 (F) 95 Sq.mm. Rupees Forty And Paise

40.40 Forty Only Nos

6.00 (G) 120 Sq.mm. Rupees Forty Five And

45.45 Paise Forty Five Only Nos

167 31.00 Providing & erecting Approved make Power Saving

50 Watt Ceiling Fan with double ball bearing ISI mark

with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium Rupees One Thousand

blades with , canopy & 30 cm. down rod erected with Nine Hundred Forty Eight

earthing.(Make shall be approved by Engineer in And Paise Twenty Nine

charge)) 1948.29 Only Nos.

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

168 6.00 Providing & erecting Approved make Ceiling Fan

with double ball bearing with Condenser 230 volt Rupees One Thousand

A.C.50 Hz. 900 mm sweep complete having 3 Nine Hundred Eighty Two

Aluminium blades, canopy erected complete. [ Make And Paise Sixty Three

shall be approved by Engineer in Charge] 1982.63 Only Nos.

169 37.00 Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly Rupees One Hundred

painted for fan complete with proper insulation Eight And Paise Seven

without leakage and earthing. 108.07 Only Mtr.

170 37.00 Supplying & erecting fan hook box of 10 mm M.S.

round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge Rupees One Hundred

M.S. box / Heavy Duty PVC box complete erected Eight And Paise Seven

concealed in Ceiling with necessary finishing. 108.07 Only Nos.

171 37.00 Providing 2.5mm.thick laminated acrylic sheet to Rupees Eighteen And

cover the fan hook or Fan box. 18.18 Paise Eighteen Only Nos.

172 4.00 Supplying & erecting approved make low noise Rupees One Thousand

decorative exhaust fan having square frame ABS Seven Hundred Three

body with inbuilt lowers & square frame. And Paise Eighty Seven

250mm with 1350 RPM Cat.II 1703.87 Only Nos

173 10.00 Supplying and erecting approved make Octagonal

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box

consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable

foundation (Included) as per details given by

manufacturer considering site requirement.

Rupees Seven Thousand

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

Five Hundred Sixty One

mm thickness with 200mmX200mmX12mm base

And Paise Eighty Seven

plate, 4-M16 Bolts and 600mm long with necessary

7561.87 Only Nos

G.I. J Bolts .Approx Pole weight 46 kg

174 8.00 Supplying & erecting approved make SMC press

moulded composite FRP. loop-in, loop-out approx.

2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged

doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable Rupees Five Hundred

clamps& earth bolt of following size of box. Fifteen And Paise Ten

(B) 250mm x 200mm x 100mm [deep] 515.10 Only Nos

175 Supplying and erecting Street light pole bracket

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5mm/80mm/require size of pole top having

nuts and bolts for fixing the brackets and having

spread of 0.5 mtr. Length with 110 deg.with vertical

plane and suitable welded stiffener reducer and

nipple with check nut complete painted with one

coat.of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of

4.00 [A] Single Arm bracket 0.5 Mtr Rupees Four Hundred

Ninety One And Paise

491.87 Eighty Seven Only Nos

6.00 [B] Double Arm Bracket 0.5 Mtr Rupees Six Hundred

Twenty Two And Paise

622.16 Sixteen Only Nos

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

176 1.00 Supplying & erecting approved make Digital time

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching

setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching.

Programming switches & housed in fire proof Rupees Three Thousand

thermoplastic enclosure & transparent cover erected One Hundred Sixty Eight

as required with necessary connection erected as And Paise Thirty Seven

directed. 3168.37 Only Nos

177 1.00 Supplying & erecting power contactor ,AC3 duty for Rupees Two Thousand

time switch complete erected as per direction Cat III Seven Hundred Eighty

(D) 4 pole 440V 40 Amp. Two And Paise Fifty Five

2782.55 Only Nos

178 0.00 SITC of Digital / PCM / TDM EPABX System having

SMT design, system with flexible universal slots.

Inbuilt Auto attendant facility, Minimum 15 Nos.

conference, Analog extension line, Calling GSM,

E&M line, PRI / EI & VOIP program me through

Analog telephone digital key from Ethernet, public

address cord, shall have unrestricted simultaneous

dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-

Locking, Class of Service, Quick Dial-Single Digit

dialing of any two external number, Once only ring

device, Chairman / Secretary - Do not disturb Facility,

Power Down Mode, Hot Line, Hot Outward Dialing,

Day Night Mode, Auto Call Back, Barge-in, Call Pick

Up & Call Transfer, Call transfer while Ringing with

Voice Guide System, (DISA), Caller ID (CLI), CLI

Base ECF, CLI Base routing Internet Ready Port,

External Music Port, Call Budgeting, Call Most

Calculation (ASMDR), DID Direct Inverse Dialing,

External Music Input, Fax Homing, Global Directory

Printing with following capacities [[Approved by

Competent Authority i.e. not Below the rank of

[B] Engineer ] 24, No of Junctions 9, 8 Port IP

No of Extension Rupees Fifty One

Resource in-built, 4 Port Web base Video Thousand Four Hundred

Conferencing, No of expandable ports : 96, Forty And Paise Thirty

Operators Console - 01 Compatible : ISDN 51440.31 One Only Nos

179 15.00 Supplying & erecting push button type telephone

instrument having speaker phone Caller ID &

speaker phone with one touch memory (min.6 nos.)&

99 memories with display system Single line Rupees Eight Hundred

[[Approved by Competent Authority i.e. not Below the Ninety Eight And Paise

rank of Executive Engineer ] 898.90 Ninety Only Nos

180 1.00 SITC of 3LCD Lamp based projector having wxga

(1280x800) or better resolution with minimum white

brightness of 3800 lumens and color brightness of

3800 lumens. The projector should have minimum

1HDMI,1VGA input. Having contrast ratio of 15000:1

or more. the projector should have auto vertical key

stone correction of +/- 30 degree and Manual

Horizontal of +/-30 degree. the projector should have

optical lens, throw ratio 1.30-1.56:1. Zoom Factor of

1.2. Lens focus Manual having focal length 16.9mm

to 20.28mm. projector should have features like AV

mute slide, quick corner and split function and should

Rupees Thirty Three

support wireless functionality with inbuilt wifi or wifi

Thousand Eight Hundred

dongle. [Approved by Competent Authority i.e. not

Ninety Five And Paise

Below the rank of Executive Engineer ]

33895.60 Sixty Only Nos

181 1.00 SITC of universal Projector mounting kit, with

necessary grouting, fasteners etc. with adjustable Rupees Six Thousand

height and suitable for all types of projectors. Eight Hundred Forty

[Approved by Competent Authority i.e. not Below the Eight And Paise Eighty

rank of Executive Engineer ] 6848.81 One Only Nos

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

182 1.00 SITC of 100 inch Self Lock MW (7 x 5) Instalock Rupees Three Thousand

Slow Retraction Screen, Aspect Ratio-4:3 Eight Hundred Ten And

[Approved by Competent Authority i.e. not Below the Paise Seventy Three

rank of Executive Engineer ] 3810.73 Only Nos

183 1.00 Providing & erecting water cooler having storage

capacity 150 Ltr. & cooling capacity 150 Ltr.per hour

@ an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚C within a hour, The water

cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank

surrounded by evaporating, coil, thermostats, relay Rupees Sixty One

etc.complete with necessary inlet & outlet Thousand Four Hundred

connection. The body of water cooler will be made Eighty Two And Paise

from Stainless Steel. 61482.74 Seventy Four Only Nos

184 1.00 Supplying & erecting reverse osmosis (RO) water

purification system with M.S. powder coated pedestal

frame, prefilter housing carbon filter suitable buster

DC pump, auto low & high pressure switches with

following size of LPH capacity & erected as directed

[D] 100 LPH with 1 phase / 3 phase Raw water pump

of 500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar

/CRI/Lubi), Dual media filter 10"x54" - (1 No), Micron

cartridge filter 20" x 2.5" ( 1No), High pressure pump

500LPH @ 10kg/cm2 - (1No - Shimge /CRI /Lubi),

RO Membrane housing with RO membrane of 40*40 -

Rupees Seventy Seven

(1No), RO pressure tube 4" x 1E - ( 1No), 0 -

Thousand Eight Hundred

1200LPH Rotameter -(2 Nos), with Recovery Rate

Ninety One And Paise

77891.20 Twenty Only Nos

185 2.00 Providing & erecting open well horizontal mono block

pump set with cast iron body, complete for three

phase submersible motor having Rupees Eleven

[B] For 2 HP 3 phase open well horizontal mono Thousand Eight Hundred

block pump set suitable for 200 LPM @ 25 mtr head Seven And Paise Ninety

suitable for 50 mm dia delivery pipe Cat.II 11807.91 One Only Nos

186 2.00 Supplying & erecting approved make motor control

cubical panel (Direct - on - line) made from 16 G.

CRCA sheet duly epoxy powder painted inside and

outside with hinged doors and locking, arrangement

consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer,

indicating lamps for R- Y - B phases, overload relay,

Automatic water level controller, Ammeter,

Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main contactor

& overload relay, start - stop push buttons, to be

Rupees Seven Thousand

erected on angle iron frame grouted on wall as

Seven Hundred Twenty

directed. The isolator, overload relay & contactors will

Two And Paise Forty Six

be of L & T, Siemens or BCH make only.

7722.46 Only Nos

(A) DOL up to 5.0 H.P.

187 2.00 Lowering of submersible motor pump set at the

depth of following ,complete with required. Nos. and

size of casing pipes erected by means of proper

chain pulley block & pipe wrenches after checking of

threads of each pipe with coupling to take the load of

the pump set and pipe assembly filled up with water

(D)For Open well Horizontal submersible pump set

for sump well Rupees Eight Hundred

(i) 1 HP to 5 HP Fifty Six And Paise Forty

856.48 Eight Only job

188 40.00 Providing and erecting ISI marked PVC insulated

PVC Sheathed Flat flexible Submersible copper Rupees One Hundred

cable approved make of following Size. Four And Paise Three

(B) 3 Core x 2.5 Sq. mm. 104.03 Only Mtr

189 2.00 Providing Water proof straight Joint in PVC insulated

flat flexible copper cable by using insulating material,

water proofing material, & making the joint complete. Rupees One Hundred

(A) Up to 10Sq. mm Eighty Nine And Paise

189.88 Eighty Eight Only Nos

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

190 Supplying, Erecting, Testing & Commissioning the

passenger / stretcher lift having following main

[1] GEAR LESS LIFT DRIVE (MRL) comprising of

High Starting torque Lift 3 phase 440 V A. C.

Permanent Magnet Synchronous motor of proper

rating with high efficiency shall be used.

[2] Micro processor based / PLC, ACVVVF, vector

control drive with encoder feedback closed loop

system shall be used for lift car and door operation

which shall be full collective selective operation hall

call demand response, UP/DOWN hall stops, Main,

Up/ Down Contactor with overload and phase

reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate

size and to sustain the impact load cabin +

passenger with safety factor of fire for steel and side

panels of Stainless steel of sheet of grade 304 duty.

Car ceiling will be S.S. finishes with aesthetic

appearance with LED ceiling lights. Car flooring shall

be of s/s 304 chaker plate design suggested of

engineer in charge. of engineer in charge. Car doors

shall be of stainless steel grade 304, hairline finish

with centre opening / telescopic automatic doors. Car

panel will also be S.S. 304 finished with emergency

stop device, mechanical door safety device, facility of

auto/ attended mode. All car panel buttons and all

floor switches must be with brail language as per lift

[4] All landing doors must be fire rated for 2 hour

shall be fully automatic centre opening/ telescopic

opening made of hairline finish steel grade of

with key holes and infrared curtains with Unlocking

facility from outside

[5] Appropriate battery operated emergency light in

the car along with alarm switch shall be provided.

Also, Emergency Light & Fan should start

immediately without any Time Delay as soon as

[6] Digital scrolling indicator system for up-down

arrow along with floor position indicator shall be

provided inside the car and at all floors.

[7] Full height infra red curtain with multiple cross /

crossing light beams shall be provided.

[8] Automatic Rescue Device (ARD) shall be

provided accordingly of passenger capacity with

Manual Rescue Operation ( Manual Cranking

[9] Audio visual indication in the lift car showing over

loading shall be provided such that doors kept open

till excess load is removed.

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with

automatic sleep timer shall be provided.

[12] Voice annunciator with suitable music shall be

provided in lift car.

[13] Self diagnostics system for operational and

safety parameters shall be provided in control panel.

[14] Mechanical over speed governor with governor

calibration as per actual site parameters and

submission of calibration certificate submission, door

key holes in the floor doors, fireman switch shall be

[15] Lift machine hoisting arrangement in the lift

machine room and monkey ladder for lift pit should

be provided by the lift agency, along with the other

steel structure works, foundations for the machine

[16] In the hoist way fascia plate shall be provided

without any extra cost, where ever required as / if

directed by engineer

[17] Permanent in with

necessary safety devices

like RCCB in all circuit, Over Voltage Under Voltage

protection and THD eliminator in circuit for lift

machine room and lift well with proper numbers of

light points, with fixtures, exhaust fan and plug points

shall be provided by the agency. Only 3 phase Power

Supply shall be made available by department in lift

machine room. Necessary Earthing as per Lift

Act/Rules shall be arranged by Lift Agency.

[18] Any civil/ electrical works for additional and

alteration in lift shaft and machine room related to

erection of lift shall be made by lift agency without

any extra cost. (granite/marble fixing around all

landing door openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and

documents and liaison services for obtaining all

necessary permission from lift inspector and other

authorities. [20] acrylic transparent

licence/display A4 size holder in lift car

[20A] As per statutory requirement of Govt. Of

Gujarat lift & escalator act 2000, lift agency has to

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after

lift erection and provide report by third party

authorized by concern licensing authority 5.agency

has to provide third party insurance up to completion

of free maintenance period and submit the document

[21] Car Panel Operating Buttons at an accessible

height from wheelchair for handicapped person and

raised numbers with brail mark with floor position

indicator/buttons must be of Auto Glow type clearly

visible when view from inside cabin.

[22] For Physically Handicapped person Full Length

Handrails of hairline finish steel grade of 304 should

be provided at appropriate 900mm height on the

Rear & Side Wall Panels in Lift Car. [23] With

Necessary kVA rating voltage controlled Stabilizer

suitable for your controller, drive and all equipments

[24] Necessary rating of DP Elcb and FP Elcb

required for lift is in scope of work which rating is

sugested by CEICED Department (electrical

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS

for PREMIUM category

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

1. Advanced control system dual 64 bit embedded

microprocessor with CANBUS Serial Communication

mode including Regenerative power efficient

operation,on site programming facility, Anti nuisance,

Pte-opening, BMS/RMS with necessary online real

time monitoring system having necessary

connectivity for remote monitoring & other suitable

supporting hardware & software devices to fulfil the

2. Floor Indication LCD Display with call registration

& brail mark with arrival gong and hall lantern & TFT

Screen in the car with MP3 Voice Announcer.

3. CAR Panel should be Scratch resistive SS

Moonrock finish / Hair Line / Honeycomb for car and

all Doors, All landing doors must have fire rating up

to 2 hours and car door must have multi-level

crisscross beam door protection.

4. To & fro communication system & wiring (i.e. car

control room & guard room ) and Each elevator are

equipped with remote monitoring system.agency has

to provide mobile app and user id and password for

4/5/6 Passengers, Ground plus 1 upper floor with

Rated Speed of 1.0 m/sec,

1.00 (C) With General PLUS ADDITIONAL SPECIAL Rupees Twelve Lakh(s)

FEATURES attached herewith. Prem. Cat. Thirty Five Thousand

Two Hundred Eighty Six

1235286.56 And Paise Fifty Six Only Nos

191 Supply, Installation, Testing & Commissioning of

following size of Grid Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material :

Anodized Aluminum alloy Frame With Twin Wall

Profile, Front Cover : High Transmission Low-Iron

Tempered Glass (AR Coated), High efficency and

positive power tolerance Pmax: 0/+5, Module

Efficiency should be approx. 19.5%-22%, Normal

operating temperature 45'C, Junction Box with

Waterproof IP67 & MC4 Compatible and Enclosed

with Bypass diodes, 100% Electroluminescence test

to ensure error free Modules, Thep. temp. co-efficient

of the PV module shall equal or better than -

0.45%/degree C. Solar PV modules of minimum fill

factor 75% to be used. Unit Production:- More than

4.5 Unit /kw /day (Actual)(1Year Avg) With 10 year

Product warranty. Modules must be complied to the

DCR(Domestic content requirements). The Ration of

AC to DC is 5:6 for the Installation capacity which are

given in AC KW.MPPT Range: MPPT Range: 80-1000

Solar Inverter:

V , Max efficiency: 97.5% - 98.9%, O/p Frequency:

50/60Hz, Operating Altitude (m) ≤4000, O/p Power

Factor: ~1, O/P THDi: <3%, Operating Tempreture

Range: -25~60°C, Integrated protection of Inverter

are Anti-islanding Protection, Input Reverse Polarity

Protection, Insulation Resistor Detection, Ground

fault protection, Residual Current Monitoring Unit,

Output Over Current Protection, Output Short Circuit

Protection, Output Over Voltage Protection, PV array

string fault Protection. Protection Degree: IP65, User

Interface LCD & APP, Datalogger & Communication:

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

Integrated, Input Reverse Polarity Protection

Integrated, Insulation Resistor Detection Integrated,

Residual Current Monitoring Unit Integrated, Output

Over Current Protection Integrated, Output Short

Circuit Protection Integrated, Output Over Voltage

Protection Integrated, Protection Degree: IP65, User

Interface LCD & APP,Datalogger & Communication:

GPRS / Wi-Fi, Module Mounting Structure: The

mounting (Rectangular pipe / square pipe / circular

pipe) with requisite cross bars, nuts and bolts, etc.

shall be Hot deep galvanized with minimum

80micron coating. The Rectangular / square /circular

hollow pipe section used for the structure should

have a minimum thickness of 2.0 mm. other than

above, the material thickness should be minimum

A certificate of a structural engineer certifying the

strength and stability of the mounting structure to

withstand the weight and wind speed of 150 km/hour

, shall be submitted by the vendors. Hot Dipped

Galvanized steel coils. suitable arrangement for base

plate for foundation , solar panel mounting, the

structure should be suitable for carry the load of solar

panel,wiring, sprinkler system etc. with necessary

foundation work/wall mount, j bolt, anchor fastner

etc. the nut bolt used for installtion of stucture should

be (SS 304) quality.The ground clearance of the

bottom most edge of solar panel shall not be less

than 300 mm to 1200 mm or as per site’s

technical/feasibility requirement.

a. Column –The minimum section (thickness) should

b. Rafter - The minimum section (thickness) should

c. Purlin - The minimum section (thickness) should

be 40MM * 40MM Balane of System with necessary

Swichgears (Suitabel size and protection of ACDB &

DCDB), inter connecting wiring, earthing system as

lightining drawing

arrester approval,

system as per the CEIG drawing

approval, all liasoning work with various gov.

dipartment like state nodal agency,DISCOM & CEIG

is included in agency scope (Excluding All charges

namely GEDA Application fees, Solar connectivity

Charges, Meter connectivity Charges, Meter testing

Charges and system stability/strenthning charges.)

20.00 (C ) Grid Tied Solar Power System: 11 - 25 kW (3 - Rupees Forty Two

phase) Thousand Four Hundred

Fifty Five And Paise Per

42455.35 Thirty Five Only KV

192 1.00 Supplying & erecting Amplifier having following

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

LED Meter :5 LED Arrays

The amplifier suitable to operate 240V A.C.& 24volt

D.C. (Battery) with automatic changeover from AC to

Rupees Thirteen

Battery operation, duly protected by wrong Battery

Thousand Five Hundred

Polarity connections. [[Approved by Competent

Fifty Eight And Paise

Authority i.e. not Below the rank of Executive

13558.24 Twenty Four Only Nos

193 8.00 Supplying and erecting wall mount speaker with

rated power of 30 watt/power tapping 30/15/7.5 watt

available,opening angle 180 degree H * 77 degree V Rupees Three Thousand

,sound pressure level 88 dB ,frequency response of Eighty Three And Paise

70Hz to 20KHz (Ahuja,Philips or equivalent) 3083.53 Fifty Three Only Nos

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

194 1.00 Supplying and erecting approved make single phase Rupees Eight Thousand

servo controlled voltage stabilizer suitable for input One Hundred Forty Nine

voltage range 180/25OV. And output voltage range And Paise Sixty Nine

225/235V. A.C. complete erected. (B) 3.0 KVA 8149.69 Only Nos

195 2.00 SITC of Gooseneck microphone Unidirectional

condenser microphone Flexible stem Phantom

powered by amplifier On/off sliding switch with

priority contact Supplied with fixed 2 m (78 in) cable Rupees Twelve

and lockable DIN connector [Approved by Thousand Forty Six And

Competent Authority i.e. not Below the rank of Paise Twenty Seven

Executive Engineer ] 12046.27 Only Nos

196 1.00 Supplying & erecting four channel Echo Mixer Pre-

amplifier with following specification. (i) Suitable to

operate on 24OV.A.C. & 12 V D.C. Battery supply (ii)

B.B.D. Delay system ECHO facility on all inputs

through ECHO volume, Repeat & Delay system. (iii)

Peak LED for setting optimum distortion free input

(iv) Two outputs, variable for line & fixed for

Rupees Four Thousand

Three Hundred Fourteen

(v)Compatible with Audio Mixing consoles.

And Paise Seventy Two

[[Approved by Competent Authority i.e. not Below the

4314.72 Only Nos

rank of Executive Engineer ]

197 18.00 SITC of Patch Panel Cat 6 UTP Keystone Type-

Port-Fully Loaded [Approved by Competent Authority Rupees Four Thousand

i.e. not Below the rank of Executive Engineer ] Four Hundred And Paise

4400.57 Fifty Seven Only Nos

198 18.00 SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug Rupees One Hundred

30U' Snag less [Approved by Competent Authority Fifty Six And Paise Fifty

i.e. not Below the rank of Executive Engineer ] 156.55 Five Only Nos

199 18.00 SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug Rupees Two Hundred

30U' Snag less [Approved by Competent Authority And Paise Ninety Nine

i.e. not Below the rank of Executive Engineer ] 200.99 Only Nos

200 1.00 SITC of 24 x 10/100/1000BASE-T ports 4 x Gigabit

RJ45/SFP Combo ports Advanced L2 switching and

security features L2+ Static Routing Optional

“standard mode” or “surveillance mode” Rupees Fifteen

management user interface [Approved by Thousand Three

Competent Authority i.e. not Below the rank of Hundred Ninety Nine And

Executive Engineer ] 15399.47 Paise Forty Seven Only Nos

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026

Quantities Tendered Rates

It estimated Rs. In In Words Total amount

It estimated Rs. In In Words Total amount

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

201 1.00 Supplying & erecting Electronic Type Cordless Call

Bell erected on PVC/Metal board having portable bell Rupees Two Hundred

push working on D.C. & bell on 230V A.C. supply Fifty And Paise Forty

with cells / battery 250.48 Eight Only Nos

202 Providing and erecting approved make split air-

conditioning unit consisting of copper condensing

unit with fan motor, hermetically sealed rotary

compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor

with its accessories by means of extra supplied

proper insulated copper tubing,drain PVC pipes

suitable for ( cost includes powder coated Stand, Eco

Friendly green gas charging, 15A plug top & Remote

Control) with necessary core cutting.

(1)For ISEER Range (KWH/KWH)(3.1 to 3.99)

1.00 [a] For 1 Ton Capacity Rupees Thirty Three

Hundred Eighty Four And

33784.50 Paise Fifty Only Ea.

2.00 (b) for 1.5 ton capacity Rupees Forty Thousand

Five Hundred Two And

40502.01 Paise One Only Ea.

4.00 (c) for 2 ton capacity

Rupees Fifty Thousand

Nine Hundred Seventeen

50917.13 And Paise Thirteen Only Ea.

203 30.00 Supplying and erecting insulated pair of soft copper Rupees One Thousand

tubing open or concealed including power and One Hundred Fifty Eight

control cable,necessary PVC drain pipes for And Paise Forty Seven

Split/Cassette AC machine up to 4 TR capacity 1158.47 Only Rmt

204 3.00 Supply and Erecting of Static Stabilizer suitable for

following capacity of A.C Machine the Stabilizer Must

have Minimum Technical Specification are Input

working Single Phase Voltage Range Up to 150V-

280V.50Hz, Output Voltage Range Up to 200V-

240V,50Hz,Autoreset Facility,LED Display for

Indicating Voltage,Spike/Surge Protection,Time

Delay Facility,Proper Wall Mount Facility with

Required Accessries & on site 3 year

Replacement/Repairing Warranty.

Rupees Three Thousand

(1) For 1.5Ton Thermal Overload Protection 12 Amp.

3030.00 Thirty Only Nos

4.00 (2) For 2 Ton Thermal Overload Protection 15 Amp. Rupees Four Thousand

Twenty Nine And Paise

4029.90 Ninety Only Nos

I / We am / are willing to carry out the work at……………….% Above / below percent (should be written in figure

and words) of the estimated rates mentioned above Amount of my / our tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. …………………. Put to Tender Rs. …………………

Deduct ……% Below Rs. …………………. Add…………% Above Rs. …………………

Net Rs. …………………. Total Rs. …………………

Signature of Contractor

Dy. Executive Engineer

Executive Engineer

R&B Sub Division

F:\Tender 2026-27\NIVIDA-25\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026\DTP Prant Office at Patan Meeting Hall Dt 07-09-2026