Providing LWSS to PC_FC Habitation Churag Bakhrot in Tehsil Karsog Distt Mandi HP SH_ C_O Head weir C_O RCC Sed Tank 50000 ltr cap C_O RCC Filter Bed of 120 sqm 3 Unit

Amount

Excavation in foundations trenches etc. in all kind of soil in all leads and lifts such as pick work, jumper work in saturated /un saturated soil blasting work and chiseling /wedging out of rocks where blasting work is prohibited up all depth and lifts including pumping and baling out water where ever requared stacking the excavated earth not more than 3mtrs.clear from the edge of excavation and then returning the stacked soil in 15cm.layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and disposing of all surplus excavated material within all leads and lifts, useful materials available from excavation to be properly stacked and handed over free of cost to the department as per direction of the Engineer-in-Charge

Providing and laying cement concrete 1:3:6(1cement:3sand:6graded stone aggregate of 40mm nominal size)and curing complete excluding cost of form work including all leads and lifts: Foundation and plinth

Providing plinth protection 50 mm thick in cement concrete 1:3:6(1cement:3sand:6graded stone aggregate of 20mm nominal size) with in all all leads and lifts:

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for in situ reinforced concrete and plain concrete work including all leads and lifts:

Flat surface such as soffits and suspended floors, roofs, landings and the like : Floors etc up to 200 mm in thickness within all leads and lifts

Vertical surfaces such as walls (any thickness) portion and like i/c attached pilaster buttressess plinth and string course and like.

Foundations, footings, bases of columns & the like and mass concrete within all leads and lifts.

Beams,cantilivers,girders and lintels sides and soffits of beams,beam haunchings, cantilivers , girders, bressumers and lintels not exceeding 1 metre in depth.

Providing form work of ordinary timber planking so as to give fair finish centering shuttering propping etc height of propping and centering below supporting floor to ceilling not exceeding 4 mtrs and removal of the same for in situ reinforced concrete and concrete work in arches domes, vaults upto all leads and lifts.

Arches, domes, vaults up to all span in all leads and lifts.

Providing and laying cement concrete 1:2:4(1cement:2sand: 4graded stone agg.20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work.

In Foundations and plinth

Walls (any thickness but not less than 0.10 m thickness) attached pillasters,plinth and string courses etc. from top o foundation level upto floor two level.

Suspended floors, roofs, landings, shelves and their supports balconies, beams girders bressumers and cantilevers up to floor level etc in all leads and lifts of any shape.

Foundation, footing & basis of columns and the like mass concrete with in all leads and lifts complete in all respect.

Placing & Laying mild /tor steel reinforcement for RCC. work including bending, binding and placing in position complete up to floor two level including all leads and lifts.:

Providing and laying cement concrete1:5:10 (1Cement :5sand :10 graded crushed stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in retaining wall/ breast wall, as per HPPWD specification complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge upto all lead & lifts.

Laying and jointing in trenches GSM tubes (light grade) Tube fitting Earth work in trenches to be measured and paid separately). as per direction and to the entire satisfaction of Engineer iin charge

100 mm diameter

50 mm diameter

Providing and laying cement concrete 1:1 ½ :3(1cement:1 ½ sand:3graded stone aggregate of 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work including all leads and lifts:

Foundation and Plinth.

Wall (any thickness but not less than 0.1 m thickness) attached pillasters,plinth and string courses etc. from top o foundation level upto floor two level.

Suspended floors, roofs, landings, shelves and their supports balconies, beams girders bressumers and cantilevers up to floor level etc in all leads and lifts of any shape.

Beams, cantilivers, girders and lintes sides and soffits of beam, beam baunchings, cantilivers, girders, bressuners and lintels not exceeding 1 meter in depth in all leads and lifts.

Providing and fixing Gun Metal wheel valve with wheel complete in all respect and to the entire satisfaction of Engineer in charge.

50 mm nominal bore

Providing and fixing precast concrete manhole cover & frame conforming to IS 12593-1998 part -I and IS 12592-1991 part -II 500 mm dia medium duty

Providing and placing in horizontal layers filtering media duly graded, screened cleaned and washed as per specified in all respectas per direction & to the entire satisfaction of Engineer-in- Charge upto all lead & lifts.

Top layer : Fine sand ( Eff.size 0.20mm to 0.40 mm & uniformity coefficient 2.00 to 3.00)

2nd layer :Coarse sand 3mm to 6 mm

Third layer : Bazri 6 mm to 20 mm

Fourth layer : Bazri 20 mm to 25 mm

Bottom layer:Broken stone 50 mm to 75mm.

Providing and placing 1st class standard brocks in filter bed in two layers so as to make cross dreains as per the direction and entire satisfaction of Engineer in charge upto all lead & lifts

Providing and laying cement concrete in M 30 grade but not leaner than 1:1:2(1cement:1sand:2graded stone aggregate of 20mm nominal size)and curing complete excluding cost of form work and reinforcement and reinforced concrete work in :-

Foundation and Plinth in all leads and lifts.

Wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level.

Providing laying in trenches galvanised mild steel tube, tube medium grade tube fitting . (earth work in trenches to be measured and paid separately) as per direction and to the entire satisfaction of Engineer iin charge

Inlet pipe 100 mm

Outlet pipe 100 mm

Scour pipe 100 mm

Providing and fixing cast steel Sluice valve with hand wheel complete in all respect and to the entire satisfaction of Engineer in charge.

(a) Inlet/ Outlet Valve 100 mm

(b) Score valve 100 mm

(c ) Supply Valve 100 mm

Manufacturing, Supplying, Fabrication and Fixing of MS Fabricated Protection Panel 750 mm x750mm made with MS Angle 40 x40x4mm for frame, MS flat 30x30x3mm for cover MS flat 25 x 5mm for fixing of sliding door bolt and MS sheet 4 mm thiuck for protection of manhole covers of storage tanks includin the cost of cutting and welding o MA angle, MS flat & MS sheet, embedding in RCC slab by drilling holes in MS angle & in RCC slab, provision for providing and fixing sliding door bolt 300 mm x 16 mm, MS Handle 100 mm, lock and applying a coat of red lead paint and painting two coat with steel paint (Firoza Blue) complete job in all respec in all leads and lifts and to the entire satisfaction of the Engineer in charge.

1.20 meter heigh fencing (as per approved design) 1.80 meter 40x40x5 angle iron 2.50 meters center to centre and RCC struts with 9 horizontal lines and two diagonal of galvanised steel bar wire (IS 278-1982 type I) weighing 9.38 kg/100 meters (min) strained and fixed to posts by typing to 6 mm galvanised steel bar nails/clips with GI binding wire including cost of Excavation RCC posts RCC struts and straining belts and embeded in cement conc 1:4:8 (1 cement: 4 sand : 8 graded stone agg 40 mm nominal size) and curing complette in all respect and to the entire satifaction of the Engineer in charge.

Steel work welded in built up sections,trusses & framed work including cutting,hoisting & fixing in position & applying a priming coat of red paint :-In grating, framed ,guards,bars,ladders, railing,brackets & similar works with in all leads and lifts as per the entire satisfaction & direction of the Engineer Incharge

Providing and laying cement concrete1:6:12(1Cement :6sand :12graded crushed stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge upto all lead & lifts.

Random Rubble masonry /polygonal rubble masonary (coursed /brought to courses ) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12(1cement: 6sand: 12graded stone agg.20mm nominal size) in plinth level in cement mortor 1:6 (1 cement : 6 sand).

Brick work using commomn burnt clay building brick in foundation and plinth in cemet mortor 1:6 (1 cement :6 sand) . In all leads and lifte (2nd class bricks).

Providing and fixing pressed steel doors frame manufactured from commercial mild steel of 1.25mm thickness including hinges jump lock jamb beed and if required angle threshold of mild steel angle of section 50X25 mm or base tiles of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means ,adjustable lugs with split and tails to each jammb including steel but things 2.5 mm thick with guards,Lock strike plate and shock specified and apply oat of aproved steel primer after oretreatment of surface as directed by Enginner-in-charge.

P/F panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled iron butt hinges with necessary screws etc. complete black enamelled iron butt hinges with necessary screws 40 mm thick 2nd class deodar wood etc complete.

Half bricks masonry in common burnt clay building bricks in cement mortar 1:4 (1 cement : 4 Sand).

Pointing and laying brick work with cement mortor 1:3 (1 Cement:3 sand) raised and cut.

Providing and laying bricks tiles over mumty roofs grouted with cement mortar 1:3 (1 cement 3 sand ) over a 12 mm layer of CM 1:3 (1 cement 3 sand ) and finished neat with in all leads and lifts complete in all respect .

6 mm cement plaster to ceilling in cement mortar 1:3 (1 cemet : 3 sand) with in all lead and lift.

15mm cement plaster in single coat on rough side of brick /concrete stone walls for interior plaster up to floor two elvel including arrises, internal rounded angles, chamfers ad/or rounded angles not exceediong 80mm in girth and finished even and smooth in C.M 1:6 (1Cement :6 Sand)

20 mm thick cement plaster in single coat on rough side of brick/stone/concrete walls for interior plastering up to floor 2 level including arrises, internal rounded angles. Chmafers and or rounded angles not exceeding 80 mm in grith and finished even and smooth with in all leads and lifts in C:M (1 cement: 6 sand).

Providing & Fixing M.S. grills of required pattern in wooden frame of window etc.with M.S. flats, square or round barswith round headedbolts and nuts by screws plain grills.

Providing and Fixing wire gauge for ventilator in all leads and lifts.

Boulder filling behind the retaining wall floor with in all leads and lifts complete in all respect.

Constructing coursed rubble hammer dressed U shaped open surface drain with side wall 15x22 cm in cement mototr (1;6) (1 cement: 6 sand) and inside plastering with cement mortor 1:3 (1 cement : 3 sand) i/c earth work and laying 10 cms cement concrete in 1:5:10 ( 1 cement : 5 sand 10 graded stone 40 mm nominal size) and 7.5 cms cement concrete 1:2:4 (1 cement : 2 sand 4 graded stone 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design with in all leads and and lifts complete in all respect.

White washing with lime on undecorated wall surfae two coat to give even shade i/c throughly brooming the surfae to remove all dust motor and other foreign matter with in all lead and lift.

Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on undecorated wall surfaces to give an even shade sand papered smooth.

Finishing wall with water proofing cement paint of approved brand and manufacturing (two coats) brushing to give an even shade i/c cleaning of oil dirt, dust and other foreign matters, and papering and knotting etc. with in all leads and lifts complete in all respect.

Providing and fixing anodised MS sliding door bolts with bolts and nuts screw etc complete.

Providing and fixing anodised MS tower bolts ( barrel type) with screws etc. complete.

Providing ad fixing anodised MS handles with necessary screws etc. complete.

Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed paint brushing wood primer pink.

Painting two coats (excluding priming coat) on new wood and wood based surfaces,with enamel paint to give an even shade including cleaning the surface of dirt ,dust and other foreign matters sand papering and stopping with enamel paint other than white.

Precast terrazzo tiles hydrauliuc compressed 20 mm thick with marble chips of specified size in flooring cement mortar 1:6 (1 cement :6 sand ) joined with neat cement slurry (Dark shade).

Providing and laying cement concrete 1:4:8(1cement:4sand: 8graded stone agg.40mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth

SANJEEV THAKUR

DEVENDER KUMAR GOVT CONTRACTOR

Tarsem Chand Associates

Thakur Constructions

MS Kamal Dev Sharma