Construction of Inspection Hut at Timbi under Jal Shakti Division Shillai Tehsil Shillai Distt. Sirmour HP

Amount

Cuting in earth work in all kind of soil stacking excavated soil in the plinth sides of foundation and then disposing of all surplus soil in all leads & lifts as directed by Engineer in Charge.

Excavation in earth work in all kind of soil stacking excavated soil in the plinth sides of foundation and then disposing of all surplus soil in all leads & lifts as directed by Engineer in Charge.

P/L CC 1:3:6 1cement: 3 sand: 6 graded aggregates 40mm nominal size curing complete excluding cost of form work infoundation & plinth

Providing & laying CC 1:1.5:3 1cement:1.5 sand 3 graded aggregates 20mm nominal size curing complete excluding cost of form work & reinforcement for RCC work in:-

foundation footing and bases of columns & like mass concrete.

Column.pillar & post upto floor two level

In suspended floor roofs landing shalves & their support balconies,beams, girders bressumers cantilevers upto floor two level

Stair cases (except spiral stair cases) excluding landing I/c preparation of surfaces

For Rain Water Harvesting Tank & Septic tank salb

Providing form work with steel plates 3.15mm thick so as to give fair finish I/c centering shuttering propping etc. height of propping below supporting floor to ceiling not exceeding 4mt. Height & removal of same in situ reinforce ment concrete and plain concrete work in :-

Foundation footing bases of columns & mass concrete.

Column.pillar & post upto floor two level square, rectangular& polygonal in plan.

Beams, cantilever Girders& lintals sides&soffits of beams, beams,haunching cantilever girders not exceeding 1mtr. Depth.

Flat surfaces such as soffits of suspended floor roofs landing & like floor etc.,upto 200mm thickness.

Edge of slab and break in floor 20 cm wide

Stair cases (except spiral stair cases) excluding landing I/c preparation of surfaces

For Rain Water Harvesting Tank & Septic tank salb

Providing mild steel/tor steel reinforcement I/c bending binding and placing in position complete

Half Brick masonary using common burnt clay building bricks above plinth upto floor two level in cm 1:4(1cement:4sand)conventiohal brick first class

Providing wood work in frames of doors, windows,clearstorey windows and other frames wrought,framed and fixed in position in Ist class Deodar wood as per direction of the Engineer Incharge

Providing and fixing Pannelled and glazed shutters for doors windows and clear storey windows including bright finish black enamel led iron butt hinges with necessary screws 40mm thick: 1st class deodar wood.

15 mm thick cement plaster on fair sides of brick/stone masonery concrete walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth in cm 1:6 (1cement:6sand)

20 mm thick cement plaster on rough sides of brick/stone masonery convrete walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth in cm 1:6 (1cement:6sand)

6 mm thick cement plaster in CM 1:3( 1cement 3 sand in roof slabs

Distempering (two coats) with oil bond distemper of approved brand and manufacture and of required shade on undecorated surfaceto give an even shade and including priming coat with distemper after throughly brushing the surface free from mortar dropping and other foreign matters.

Finishing wall with water profing cement paint of approved brand and manufacture and of rerquired shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

Providing and fixing 10mm thick antiskid water proof stain and impect resitent resistent heavy duty vetrified tiles Nitco or equivalent 600x600mmx10mm manufactured or approved shade and colour in flooring and landings laid over (12mm thick cement mortar 1:3)(1Cement:3Sand)jointed with cement slurry mixed with pigment to match the shade of tiles as required complete within all leads and lifts and as directed by the Engineer-in- charge..

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by throughly cleaning oil grease & dirt and other foreigm matter

Painting two coats(excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give even shade including cleaning all dirt, dust and other foreign matters white paint

Painting two coats(excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give even shade including cleaning all dirt, dust and other foreign matters other than white paint

Providing and fixing of MS grill of required patttern in wooden frame of window etc. with MS rounded headed bolts and nuts or by screw: Plain Grill.

Stone soling properly hand packed filling interstices with spalls and consolidating with power road roller to the required gradient and camber including spreading watering and rolling of binding materials moorum or earth etc. 100mm spread thickness (finished work including materials and labour) within all leads and lifts an da directed by the Engineer-in-charge.

Providing and fixing MS sliding door bolts withnuts and screws complete 300mmX16mm

Providing and fixing anodized aiuminium. tower bolts barrel type with screws etc. complete.

Providing and fixing anodized aluminium .handles with screws etc. complete.

100mm dia

Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm dia metres bolts, nuts and wooden plug and embedding in cement concrete block 30x10x15cm. 1:3:6( 1cement:3sand:6 graded stone att. 20mm nominal size) within all leads and lifts and as directed by the Engineer-in-charge.

Steel work welded in built up sections, trusses and framed work,including cutting,hoisting ,fixing in position and applying a priming coat of red lead paint etc.

Providing and fixing Wooden Plank ceiling with tongued and grooved jointing with screws and fixed in position in Ist class Deodar wood including all leads,lifts& carriage of material at site, as per direction of the Engineer Incharge.

Providing and fixing 40mm thick plain framed panelling with necessary screws,priming coat on unexposed surface etc. including all leads,lifts& carriage of material at site, as per direction of the Engineer Incharge.

Random ruuble masonry/ polygonal masonry (unco ursed/brought to courses ) with hard stone of appro ved quatily in foundation and plinth including levelling up with cwment concrete 1:6:12(1 cement: 6 sand: 12graded stone aggregate 20 mm nominal size) in cement mortat 1:6(1 cement: 6 sand) in breast wall /retaining wall

Wiring for light point/fan point/exhaust fan/call bell point with 1.5 Sq.mm. of finolex/polycap make PVC insulated heat resistant flame retardant (HRFR) and low smoke duble core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated duble core copper conductor cable as required. with in all leads and lifts as per direction of the Engineer-in-Charge. Group A.

Wiring for power plug with 2x4 Sq.mm. of finolex/polycap make PVC insulated heat resistant flame retardant (HRFR) and low smoke duble core (flexible) copper conductor cable in PVC casing & capping along with 1 No. 4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.with in all leads and lifts as per direction of the Engineer-in-Charge. Group A.

Wiring for power plug with 4x4 Sq.mm. finolex/polycap mak PVC insulated heat resistant flame retardant (HRFR) and low smoke sinlge core (flexible) copper conductor cable in PVC casing & capping along with 2 No. 4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.with in all leads and lifts as per direction of the Engineer-in-Charge. Group A.

Wiring for circuit/sub-main of finolex/polycap mak with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke sinlge core (flexible) copper conductor cable in PVC casing & capping along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

2x1.5 Sq.mm.

2x2.5Sq.mm.

Supplying & Fixing metal GI boxes of following sizes (nominal size) on surface or in recess suitable for fixing phenolic laminated sheet cover in front including painting etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

18M metal box (1.2mm GI).

1M/2M metal box (1.2mm GI).

8M metal box (1.2mm GI).

Supplying and fixing following rating Piano-type switch/socket of anchor/havells make on the existing switch box/cover including connections etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

32A DP Switch with indicator-2M

16 Amps one way switch,

6A/ 16A 3pin Shuttered socked

10A/16A Shuttered socked

Supplying and fixing bakelite batten/angle holder including connections etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

Supplying and erection of 6 amps, to 32 amps, rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge. Single pole . Cat-A

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge. 40 Amps. Cat- A

Supplying and fixing of following way, single pole and netural sheet steel MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus-bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels inter-connections phosphatized and powder painted, including earthing etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge. Single door-6 way

Earthing with G.I. earth pipe 4.5mtr. Long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

Extra for using salt and charcoal for pipe earth eletrode complete as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

Supplying and laying 6 SWG G.I. wire at 0.50 mtr. Below ground level for earth electrode conductor, including soldering etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing sleek and decorative strip type fixture with domestic electronic ballast and colored engineering plastic end plates, suitable for 28 watt FTL (T5), complete with all accessoris (excluding the T-8 tube), connections, testing and commissioning etc. as required. 1x 28 watt-FTL (T5) (Category-A with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

Supplying and fixing Ding-Dong/Electronic musical bell, suitable for D.C./A.C. single phase, 230 volts complete as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

Supplying and fixing of integral CFL Post Top Lantern of following capacity, cast aluminium spigot, spun alumnium canopy, opal acrylic diffuser, complete with all accessoreis but excluding CFL lamp including making connections, testing etc. as required. Gate post top lantern-FCL 26 watt. with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing laying and fixing of one No. aluminuim conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size. Armoured cable 4 sq. m (twin core) with in all leads and lifts as per direction of the Engineer-in-Charge.

Erection of Galvanized Iron (G.I.)/Steel tubular or Steel rail pole of length 3 to 8 metre but not exceeding 8 metres up to a given depth below G/L. the hole of excavation about 30 cm dia. And given depth to filled in up to 15 cm below G/L with 1:3:6 cement concrete and three above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mm x 10mm x 45mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6mm thick, the fuse-box shall have a water tight cover, including excavation and refilling etc. compelt in all respects as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

Supply erection ,installing and commissioning of water geyser 25 ltrs Racold/Bajaj/Havells/Crompton make 220-240 operation band with all pipe and electrical fittings complete in all respects.

Providing and fixing vitrous China closed squatting pan of Jaquar/kohler/Roca make including with cistern tank of 10 ltr cap.(Western type WC pan of jaquar make) size 580 mm ,earth work bed concrete (i/c seat cover foot rest & trap along with angle cock complete in all respects.

Prviding and fixing brass bib tap of Jaquar//kohler/Roca make (superior of heavy type) 15 mm dia long nose etc. complete all respect.

Providing & fixing C.P. stop cock 15 mm dia of Jaquar//kohler/Roca make etc. complete in all respect.

Providing & fixing vitreous china wash basin with single hole for pillar tap with C.I. brackets, painted white including cutting holes & making good the same including fittings. of Jaquar//kohler/Roca make

Providing and fixing 75 mm size floor trap for wash basin of Jaquar//kohler/Roca make including jointing the trape with pan and soil pipe cement mortaor 1:1 (1 cement:1 sand).

Providing and fixing Soaptray( Viterous china). of Jaquar//kohler/Roca make .

Providing anad fixing CP Brass bracket fing in woooden pplug with CP brass screws 750 mm x20mm size 600mmm x20mm of Jaquar//kohler/Roca make make including all leads,lifts & carriage etc.

Proving and fixing 600x450 bevelled edge mirror of deeor make superior glass mounted on 6 mm thick A.C. Sheet or plywood sheet & fixed to wooden plug with CP brass screwes & washer complete in all respects

Providing and fixing wall cellling and floor GMS tube of Jindal make (heavy grade ) fiiting and clamps i/c making good wall, celling and floor i/c entire carriage of material up to al leads and lifts

Providing and fixing high pressure SS spigot and socket, waste and ventilating pipe ISI marked jaquar make including fixing with approved adhasive etc. complete i/c entire carrige of material up to all leads and lifts

Chisselling/weddging out trenches (Jhari) in brick masonary for plumbing for pipe fitting

Providing and fixing pressure PVC Pipes, plain bends/ collars, etc Grohe/ dornbracht/ bette including fixing with approved adhasive etc complete /c entire carrige ofmaterial up to all leads an lifts

110 mm dia

Bends

Collars

Providing & fixing plastic storage tank 2000 ltrs cap sintax make, triple layer moulded water tank with double lid system all leads & lifts as per the direction of Engneer in charge

Providing & fixing Mixture Type water Taps of stainless steel jaquar/kohler/roca make, including all accessories with all leads & lifts as per the direction of Engneer in charge

Providing & fixing water showers of stainless steel jaquar/kohler/roca make,including all accessories with all leads & lifts as per the direction of Engneer in charge

M/s BHAWAN SINGH (BID ID -550397)