Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.8 LAccepted-AOC | 1 | Accepted-AOC 1 | |
| 2 | 2₹1.8 L+₹2,485.33 (1.37%)Rejected-AOC | 2 | Rejected-AOC 2 | |
| 3 | Rejected-Technical | - | Rejected-Technical 3 |
| Sl No | Description | Qty | Unit | shaji abraham L1 | KIDANGOOR INDIPENDENT LABOURCONTRACT CO OPERATIVE SOCIETY L2 | Dilkush L3 |
|---|---|---|---|---|---|---|
| 1.00maintenance | ||||||
| 1.00 | OD293618/2025-2026:Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium
Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the
building , for all heights and all levels etc. including: a) Structural analysis & design and
preparation of shop drawings for pressure equalisation or rain screen principle as required,
proper drainage of water to make it watertight including checking of all the structural and
functional design. b) Providing, fabricating and supplying and fixing panels of aluminium
composite panel cladding in pan shape in Wooden shades made out of 4mm thick aluminium
composite panel material consisting of 3mm thick FR grade mineral core sandwiched between
two Alumini um sheets (each0.5mm thick). The aluminium composite panel cladding sheet
shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified
using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods
etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with
serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and
anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all
complete required to perform as per specification and drawing The item includes cost of all
material & labour component, the cost of all mock ups at site, cost of all samples of the
individual components for testing in an approved laboratory, field tests on the assembled
working curtain wall with aluminium composite panel cladding, cleaning and protection of the
curtain wall with aluminium composite panel cladding till the handing over of the building for
occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s
The Contractor shall provide curtain wall with aluminium composite panel cladding, having all
the performance characteristics all complete , as per the Architectural drawings, as per item
description, as specified, as per the approved shop drawings and as directed by the Engineer-inCharge. However, for the purpose of payment, only the actual area on the external face of the
curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be
measured in sqm. up to two decimal places. | 23.76 | sqm | 4,289.69 ₹1,01,923.03 | 4,107.15 ₹97,585.88 Lowest | 4,361.34 ₹1,03,625.44 |
| 1.00 | OD305973/2025-2026:Providing and fixing in position wall panelling at all height with Plain G.S. sheet fixed with bolts and nuts 8 mm dia G.I. limper and bitumen washers complete:1.60 mm thick with zinc coating not less than 350 gm/ m2 | 21.6 | sqm | 1,641.69 ₹35,460.5 Lowest | 1,844.6 ₹39,843.36 | 1,762.88 ₹38,078.21 |
| 1.00 | 10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 200.2 | kg | 131.14 ₹26,254.23 Lowest | 140.41 ₹28,110.08 | 134.19 ₹26,864.84 |
| 1.00 | OD305955/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness
with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required. | 6.48 | sqm | 577.86 ₹3,744.53 Lowest | 621.36 ₹4,026.41 | 593.83 ₹3,848.02 |
| 1.00 | 12.4.1:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gm/m2 | 1.5 | metre | 989.73 ₹1,484.6 | 1,030.97 ₹1,546.46 | 985.3 ₹1,477.95 Lowest |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 12.87 | kg | 168.35 ₹2,166.66 Lowest | 187 ₹2,406.69 | 178.76 ₹2,300.64 |
| 1.01 | OD306285/2025-2026:Providing and fixing polyvinyl letters for all heights and all levels etc. including cost of materials and labour charges ect complete as per the direction of site Engineer -in- charge. | 1,300 | per Letter per cm height | 8.17 ₹10,621 | 8.17 ₹10,621 | 7.81 ₹10,153 Lowest |
Tender Value
Refer Docs
EMD Value
₹4,875
Closing Date
29 Sept 2025, 2:00 pmClosed
Assistant Engineer , LIDandEW Section kidangoor
Assistant Engineer , LIDandEW Section kidangoor
244/25-26 Kidangoor GP-Renovation for Kidangoor Bus bay
2025_LSGD_800290_1
244/AE/LIDandEw/KDR
Open Tender
Civil Works - Buildings
Item Rate
KIDANGOOR
Please refer Tender documents.
10 documents required · 10 mandatory
₹555
Yes
₹4,875
Yes
29 Oct 2025
22 Sept 2025
30 Sept 2025
22 Sept 2025
29 Sept 2025
22 Sept 2025
Amount
maintenance
OD293618/2025-2026:Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in Wooden shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Alumini um sheets (each0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-inCharge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
OD305973/2025-2026:Providing and fixing in position wall panelling at all height with Plain G.S. sheet fixed with bolts and nuts 8 mm dia G.I. limper and bitumen washers complete:1.60 mm thick with zinc coating not less than 350 gm/ m2
10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
OD305955/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.4.1:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gm/m2
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD306285/2025-2026:Providing and fixing polyvinyl letters for all heights and all levels etc. including cost of materials and labour charges ect complete as per the direction of site Engineer -in- charge.
KIDANGOOR INDIPENDENT LABOURCONTRACT CO OPERATIVE SOCIETY (BID ID -2362662)
Dilkush (BID ID -2363504)
Bidder Name
Dilkush
shaji abraham
KIDANGOOR INDIPENDENT LABOURCONTRACT CO OPERATIVE SOCIETY
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .