SPL REPAIR TO VARIOUS BLDGS AT URI UNDER GE 969 EWS

Amount

Dismantling of plain/corrugated steel sheeting, any gauge or thickness including Nainital or similar pattern roof covering,complete all as specified and as directed.

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,complete all as specified and as directed.

M&L Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises,complete all as specified and as directed.

Material and labour, non-skid coloured ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, in floors etc, set jointed in neat grey cement slurry and pointed in white or coloured cement to match, laid over and including 10 mm thick screed bed in CM (1:4), complete all as specified and as directed.

M&L for coloured glazed designer ceramic tiles 300 x 450 x 7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slurry and pointed with white/colour cement to match with the surface over 15mm thick rendering in CM 1:4,complete all as specified and as directed.

M & L Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc, Incl screed bed 15 mm thick in CM (1:6), complete all as specified and as directed

M&L for chequerd cement concrete tiles 20cmx20cm x22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments machine pressed in floors including screed bed 15mm thick in CM (1:4), complete all as specified and directed.

M&L for PCC 1:2:4 type B1 25mm thick (20mm graded aggregate) as in floors etc,complete all as specified and as directed.

Demolition of PCC in ground floor and pavings n. exc 15 cm thick below or above ground level,complete all as specified and as directed.

Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 ( using 20 mm graded aggregate) as in path/pavings/ floor/plinth protection etc laid in bays incl finishing the concrete surface even and smooth without using extra cement,complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in any mortar in floors, aprons etc, complete all as specified and as directed.

M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite,complete all as specified and as directed.

M&L RCC 1:2:4 type B1 using 20mm graded stone agg in RCC lintel, shelves, chajja, manhole covers etc. with necessary form work,complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc,complete all as specified and as directed.

S&F Wooden wall/ceiling panelling with tongued & grooved joint laminated over high quality DHF,8 mm to 10 mm thick fixed to timber frame work of soft wood 75 mm x 50 mm @ 600 mm c/c on both side,complete all as specified. Note :-The rate quoted shall be included timber frame work & biding as per required.

Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work,complete all as specified and as directed.

Dismantiling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work,complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm,complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular in section exc 6 Sqcm and not exc 13 Sqcm,complete all as specified and as directed.

M&L, for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps,complete all as specified and as directed.

Taking down chowkats with shutters (without taking off shutters from the frame) n. exc 1.5 sqm,complete all as specified and as directed.

Taking down chowkats with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each,complete all as specified and as directed.

S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlocking closing (vi) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu ISI marked or its equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

Demolition of brick work or stone / boulder masonry built in CM including all quoins arches, pillars,complete all as specified and as directed.

M & L for Precast cement concrete hollow block type 1:3:6 using 16 mm graded aggregate as per IS 383 complete masonry exc. 10 cm in width and setting in cement mortar 1:4,complete all as specified and as directed.

M&L for walling or random rubble,uncoursed well bounded bedded and solidly hearted, built in cement mortar 1:6,complete all as specified and as directed.

M&L Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6,complete all as specified and as directed.

M&L Rendering 15 mm thick on stone walling ,brick work surfaces finished even and smooth with using extra cement in cement mortar 1:4,complete all as specified and as directed.

Material and labour, rendering 15mm thick plaster in cement mortar (1:6), on brick/concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and as directed.

Dismantling of CI or reinforced concrete/PVC/ drain pipe internal dia 100/75mm , jointed in cement mortar and taking out of trenches if required,complete all as specified and as directed.

S & F PVC (SWR) pipe 110mm bore single in any type with rubber ring joint laid in wall/trenches /floor,complete all as specified and as directed.

S & F PVC (SWR) pipe 75 mm bore single in any type with rubber ring joint laid in wall/trenches /floor,complete all as specified and as directed.

S & F PVC (SWR) bend any radius 110mm bore,complete all as specified and as directed.

S & F PVC (SWR) bend any radius 75mm bore ,complete all as specified and as directed.

S & F PVC (SWR)gully trap 125/110mm setting and jointing with solvent cement as fixed in repairs,complete all as specified and as directed.

S & F PVC(SWR) reducers 75/110mm bore,complete all as specified and as directed.

S & F 100mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof,complete all as specified and as directed.

S & F PVC (SWR) 110mm Junction single (single T) equal or unequal,complete all as specified and as directed.

S & F 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, incl bolts and nuts and securing ends of stays to wall or roof,complete all as specified and as directed.

S&F in repair Vitreous China one piece wash down water closet pan (pedestal pattern) including flushing cistern, seat cover and all necessary fittings , white, complete all as specified and as directed.

S&F in repairs Vanity wash hand basin with modular cabinet (floor mounted), white/coloured, flat back size 66x45x83 cm, complete all as specified and as directed.

S&F in repair sink with drainage board size 1145x510 mm,bowl size 560x410x200 mm made of stainless steel 0.63mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe, complete all as specified and directed.

S&F in repair 32 mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms),complete all as specified and as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position,complete all as specified and as directed.

S&F in repair 15 mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed,complete all as specified and as directed.

S&F, Chromium Plated bib taps, cast copper alloy, fancy type with capstan head, crutch or butterfly handle chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15/20 mm dia bore, fixed as in repair,complete all as specified and as directed.

Supply and fix, angular stop valves , cast copper alloy, screwed down high pressure, fancy type with crunch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions, or for 15mm dia bore, fixed as in repairs, complete all as specified and directed.

Supply and fix, Chromium plated brass shower rose 125mm dia with swivel joints, fixed in repairs, complete all as specified and directed.

Supply and fix, towel rail 600 mm long (between flanges), 20mm dia, ‘D’ type, chromium plated brass, fixed to walls with screws and plastic cleats, fixed as in repairs, complete all as specified and directed.

Supply & fix, PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450mm long, suitable for 15mm dia bore pipe, fixed as in repairs, complete all as specified and as directed.

Supply and fix, grating square (SLIT) 150mm size, of PTMT (Openable), fixed as in repairs, complete all as specified and as directed.

S & F Swivel shower of PTMT any colour for fixing with 15mm pipe.(min wt 40gms),complete all as specified and as directed.

Taking up or down steel tubing and connections, size 15 mm dia bore, including cleaning for re-fixing or removal to stores, complete all as specified and as directed.

Taking up or down steel tubing and connections, size 20mm dia bore, including cleaning for re-fixing or removal to stores, complete all as specified and as directed.

M&L for galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 15 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.

Material and labour, galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 20 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.

S & F in repair, Stainless Steel curtain rails 25mm dia including brackets etc,complete all as specified and as directed.

Dismantling water tanks exc 500 and n exc 1000 ltr and removing to store,complete all as specified and as directed.

M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs,complete all as specified and as directed.

Preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide,complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surface of wall and applying two coats of distemper oil emulsion over one coat of primer including chalk whiting,complete all as specified and as directed.

Material and labour, preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint, and removal of rubbish off the premises upto a distance not exceeding 50metres, complete all as specified and as directed.

Excavation in post holes each n exc 0.5 cum getting out, returning, filing in and removing earth or brocken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m in soft/loose soil and making good surface as per existing surface,complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 Type C-2 (using 40 mm graded stone aggregate) as in foundation filling or mass concrete, complete all as specified and as directed.

Preparation of old painted steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint ,complete all as specified and as directed.

Taking down cement plaster on brick wall including racking out joints,soffits of slabs/chajja/sunshaded hacking for keys, scrubbing down with water etc,complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint, and removal of rubbish off the premises upto a distance not exceeding 50metres, complete all as specified and as directed.

S&F for Steel work in tubular trusses, as in gate ,post , including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and as directed.

Supply and fixing machine crafted box type cabinet for kitchen using 18-19 mm thick PVC board both side laminated with and including all necessary fitting and fixtures to install wire basket , shutter shall be fixed by using full overlay MS clips on hinges high quality nickle plated satin finish size- 101 mm -150 mm ,02 Nos per leaf ,including all fittings ,channels , 150 mm s/s handles complete all specified and directed . NOTE:- (i)Wire basket shall be measured separetely. (ii)Front area of box shall be considered for payment purpose. (iii) Depth of box shall be equal to the width of cooking platform.

Supply and fixing wire basket made of top quality 304 grade stainless steel, nickle chromium plated ( Ni 4%) of Approved design and pattern,complete all as specified and as directed.

M&L cement concrete type B-1, 1:2:4 (using 20mm graded aggregate ) as in copping, benching etc,complete all as specified and as directed.

M&L 4mm thick Pine wood veneered decoretive, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on ceiling,complete all as specified and as directed.

M&L for 4 mm thick Pine wood Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with screws to timber frame work on wall,complete all as specified and as directed.

M&L for second class soft wood (Kail) clean swan timber fixed in scantling.

All as per Ser item No 77 above but except timber complete all as specified and directed.

S&F second class hardwood plain fillets square, rectangular in section exc 3 Sqcm and not exc 6 Sqcm complete all as spedified and directed

S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champhered one side and the boarding is matched,complete all as specified and as directed.

Material and labour for rendering 15mm thick plaster in cement mortar (1:6), on brick/concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and as directed.

M & L for 20 mm thick cement plaster in cement mortar 1:4 with WPC @ 2% by weight of cement or as per manufacturer instruction on fair faces of brick work finished even and fair without using extra cement,complete all as specified and as directed. (WPC will be measured and paid separately)

S&F 2nd class hard wood plain soild, straight chowkats and frame wrought, framed rebated on soild, rounded or chamfered, put together with pinned at joints,complete all as specified and as directed.

S&F 35 mm thick, 2nd class hardwood, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides; supplied and fitted to chowkats, complete all as specified and as directed.

S&F 2nd class hard wood 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats,complete all as specified and as directed.

S&F 2nd class 30 mm thick hard wood (Kail) glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats size of members of shutters as specified in SSR Part - I section 8 Clause 8.23 (b) for windows, ventilators etc are provided with stiles and rails,complete all as specified and as directed.

MS Cold rolled Butt hinges medium weight 100 mm long,complete all as specified and as directed.

MS Cold rolled Butt hinges medium weight 75 mm long,complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy,complete all as specified and as directed.

S&F in repair 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate,complete all as specified and as directed.

S&F 200mm long Anodised Aluminium tower bolt,complete all as specified and as directed.

S&F 100mm long Anodised Aluminium tower bolt,complete all as specified and as directed.

S&F 150mm long extruded aluminium alloy handle,complete all as specified and as directed.

S&F 100mm long extruded aluminium alloy handle,complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple,complete all as specified and as directed.

S&F Sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each pane 3mm thick,complete all as specified and as directed.

Perparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer,complete all as specified and as directed.

Perparation of Old painted surface wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint),complete all as specified and as directed.

Preparation of old plastered or unplastered surface of walls and applying two coats of cement base paint and removal of rubbish off the premises upto a distance not exc 50 metres, complete all as specified and as directed.

S&F for Pressed steel frames for doors size of frame 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthstuck inside with solvent cementfor stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 2nd Class Soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints,complete all as specified and as directed.

S&F 35 mm thick, 2nd class hardwood, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides; supplied and fitted to chowkats, complete all as specified and as directed.

S&F in repair table top wash basin (480x300x160mm) incl CP waste coupling and PVC wate pipe and MS steel brackets,complete all as specified and as directed.

S&F in repair 15 mm dia pillar tap fancy type with capstan heads CP screwed down high pressure with or with out lettered 'Hot' or 'Cold' with long screw shank fly nuts screwed shanks and fly-nuts screwed for iron pipe and fixed,complete all as specified and as directed.

S&F in repair Vitreous china squatting pane, Orissa pattern size 580 x 440mm plate with integral foot rest (excluding flushing cistern and flush pipe) including 'S' or 'P' trap and cement concrete bedding,complete all as specified and as directed.

S&F in repairs 10 Ltr PVC valve less symphonic action type flushing cistern low level white/coloured with inlet ball valve float , handle, PVC pipe to WC and incl PVC connection 600mm long,complete all as specified and as directed.

S&F in repair Soap dish, vitreous China white, approximate size 160x160x90mm fixed to plugs with chromium plated brass screw,complete all as specified and as directed.

Supply and fixing in repair looking mirror of size 1500 x 600mm, 5.5 mm thick duly surrounded by terak wood beading and 6mm thick back ply fixed with suitable arrangement etc,complete all as specified and as directed.

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4,complete all as specified and as directed.

M & L for Providing, cement concrete type B1 (1:2;4) 20 mm graded agg in roof kerbs or mud stops, rounded or chamfered on edges,complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided,complete all as specified and as directed.

Per- cast reinforced cement concrete M-15 (1:2:4 nominal mix ) type B-I, (Using 20mm grade stone agg) set in cement mortar 1:4 as in manhole cover, complete all as specified and as directed.

TMT MS bars 6 to 8mm dia cut to length bent to shape required including cranking, bending spirally for hoping for columns ends and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

TMT MS bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns ends and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

Supply only integral water proofing compound (ISI marked) of approved brand, complete all as specified and as directed.

S&F in repair Vitreous China wash basin with pedestal pattern, white, flat back, size 550x400mm incl CP waste coupling and PVC wate pipe and MS steel brackets, complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including making good to floor with existing finish, complete all as specified and as directed.

Dismantling of boarding any description fixed in any position with nails, complete all as specified and as directed.

M&L for brick work with sub class 'B' brick, straight, or curved on plan exceeding 6m mean radius built in CM1:4 as in manholes complete all as specified and as directed.

Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface.

M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casing caping with all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly, complete all as specified and as directed.

(a) One light point/fan point/Ex fan point/bell point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on same board with accessories

(b) One 3 pin 5 Amp switch socket outlet on independent board

S&F switch piano Flush type, single pole, one way 5 amp 240 volts, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type, complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 Amps flush type,universal,complete all as specified and as directed.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor, complete all as specified and as directed.

M&L for Point wiring using proper colour coding complete with 1100 Volts grade 4 Sq.mm, single core, PVC insulated, unsheathed cable with multistranded copper conductor with ISI mark FRLS grade, conforming to IS-694 in and including PVC medium grade conduit not less than 25mm dia. ISI marked with all accessories concealed in wall/ceiling/ floor /roof etc,with sunk pressed steel/GI terminals boxes having 1.6 mm thick suitable for housing of modular type switches/sockets/fan regulators, including 2.5 Sq.mm PVC insulated, unsheathed, multistranded copper conductor, FRLS 1100 volts grade (green colour) as earth wire, connected to common earth dolly for switch socket combination, 3 pin, 15 Amps on independent board, complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type,universal, complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

S&F in repair Lamp holder/angle batten, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings, complete all as specified and as directed.

S&F LED Lamp 9 W 'T' type.

S & Fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified.

S & F in repair Sub main wiring using two runs of single core PVC insulated cable with copper conductor multistranded 1100 volts of sizes 6.0 Sqmm through existing/ new non metalic PVC casing capping including copper earth wire in green colour of size 6.0 Sqmm connection to DB with thimbling complete as specified and directed. Note:- Two runs of sub main wire including earth wire and rigid non metalic PVC casing capping shall be measured as one unit per RM make of cable.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S & F in repairs MCB, DP 40 Amps 240 Volts C curve, complete all as specified and as directed.

S & F MCB SP 6 to 32 Amps, 240 Volts, C Curve complete all as specified and directed.

S & F Bell push, flush type, 5 amp complete all as specified and directed.

S & F Bulkhead luminaire comprising of high brightness LEDs 9/10W LED, IP-65/66 complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

Supply and fixing in repair Non-metalic Ventilating Exhaust fan 200 mm sweep 230 volts, 900 rpm AC connecting up including provision of cable from ceiling rose/ connector to fan, complete all as specified and as directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work as Excavation, RF and removal etc.

Supply, laying and testing cable XLPE insulated screned PVC bedded galvanized steel strip or wire armoured elect power cable 1100 volt grade with standard aluminium conductor of size 16 Sqmm 2 Core, complete all as specified and as directed.

S&F in repairs Stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 230 volts, 6 Amps, complete all as specified and as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near, complete all as specified and as directed.

S&F in repairs MCB DP 32 Amps 240 Volts, C curve, complete all as specified and as directed.

S & F modular type switch 6 Amps, one way one module, complete all as specified and as directed.

S & F Modular Type Socket outlet, 6 Amps, 2/3 pin combined 2 module, complete all as specified and as directed.

S & F Modular Type Socket outlet, 6/16 Amps,combined 2 module, complete all as specified and as directed.

S&F electric bell, ding dong AC 230Volts, single pole, complete all as specified and as directed.

S & F Modular Bell push 6 Amps, modular type, complete all as specified and as directed.

Supply and fix modular fan step regulator,120 Watt - 2 module, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 01 Nos module switch/socket etc, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 02 Nos module switch/socket etc, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 03 Nos module switch/socket etc, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 4 Nos module switch/socket etc, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 6 Nos module switch/socket etc, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 8 Nos module switch/socket etc, complete all as specified and as directed.

Supply and fixing PVC body fresh air fan with PVC blades, ISI marked, 225 mm sweep with louvers and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to fresh air fan complete in all respect, complete all as specified and as directed.

Supply and fixing MCB, DB,SPN, double door, IP-43, 8 way with 200 A rated bus bar having earth terminal, Neutral bus terminal for 8 way circuits complete in all respect Concealed in wall including making electrical incoming and outgoing connection with legs/thimbles, complete all as specified and as directed.

Supply and fixing MCB, DB,SPN, double door, IP-43, 4 way with 200 A rated bus bar having earth terminal, Neutral bus terminal for 4 way circuits complete in all respect Concealed in wall including making electrical incoming and outgoing connection with legs/thimbles, complete all as specified and as directed.

Supply fixing MCB, SPN, 10-40Amp , 240 Volt, 50HZ, 10 KA, `C` series including making electrical connection with the help of legs/thimbles, complete all as specified and as directed.

Supply and fixing MCB,SP, 02 Amp to 32 Amp, 240 Volt, 50HZ, 10 KA, `C` Series, making electrical connection with the help of Lugs/thimbles, complete all as specified and as directed.

M&L for submain wring using proper colour coding with 3 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100 volt, Multistranded, copper conducter cable of size 6 Sqmm drawn and including PVC conduit medium grade not less than 25 mm dia, ISI marked concealed in wall/roof etc with required accessories complete all as speacified and directed. Note :- (i) The minium size of PVC conduct shall be 25mm however higher shall be used as per numbers of conductor to be pass through the conduit. Engr-in-Charge shall ensure for proper size of PVC conduit be used at site. (ii) Seperate conduit shall be used for each submain wiring circuit irrespective of any number of wire. (iii) 3 runs of conductor and one run of conduit shall be measured as one run.

M&L for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to GI strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion, complete all as specified and as directed.

Supply and fixing 1x20 watt baton integrated LED channel tube light fitting, 230 Volt indoor housing with integral sleek extruded polycarbonate LED channel with white acrylic cover surface/wall mounting, with inbuilt electronic driver/control gear, bipin holders, connector block etc complete wth all accessaries internally pre wired and including connecting lead, three core 1.5 Sqmm from ceiling rose to tubelight fitting, complete all as specified and as directed.

Supply and fixing 1x10 watt baton integrated LED channel tube light fitting, 230 Volt indoor housing with integral sleek extruded polycarbonate LED channel with white acrylic cover surface/wall mounting, with inbuilt electronic driver/control gear, bipin holders, connector block etc complete wth all accessaries internally pre wired and including connecting lead, three core 1.5 Sqmm from ceiling rose to tubelight fitting, complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and as directed.

S & F Single pole and neutral enclosure with a two pin and earthplug and socket complete with one single pole MCB, complete all as specified and as directed.

Supply and fixing ceiling fans completewith blades, down rods, electronicregulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFMwith service value 6.00 BEE. Five starrated with brushless direct current motor (BLDC), complete all as specified and as directed.

Supply & fix Air Circulator fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting, complete all as specified and as directed.

Supply and fix Decorative light wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base, complete all as specified and as directed.

Supply and fix Track light bed side decorative type, complete all as specified and as directed.

Supply and fix SMD LED panel recess/surface 15 watt Round/square type ' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ, complete all as specified and as directed.

Supply and fixing angular holder, PVC body complete with wiring etc, complete all as specified and as directed.

M&L Telephone jack with pressed steel sunken box with 3 mm thick PVC top cover, complete all as specified and as directed.

Material and labour for Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, with two single core cables flat or circular 16 sq. mm 2 core, complete all as specified and as directed.

Note:- Schedule of credit Rs 76,993.50 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S ABDUL KARIM RATHER (BID ID -3299590)

SOFI CONSTRUCTIONS (BID ID -3300327)

m/s mohd rafiq lone (BID ID -3300103)

M/S ALTAF HUSSAIN KHUROO (BID ID -3299545)

M/S ABDUL AZIZ MIR (BID ID -3299979)

M/s Mohammad Shafi Malik (BID ID -3299921)

DUKE CONSTRUCTION (BID ID -3299401)

M/S SUMJI BROTHERS (BID ID -3300232)

M/S GHULAM RASOOL LONE (BID ID -3299415)

M/s ABDUL QAYOOM LONE & BROS (BID ID -3299550)

M/S KULBIR SINGH SODHI AND CO (BID ID -3300234)