General Division office Minor irrigation Painting Shelf Window Blinds and Maintanance workGeneral Civil Work

Work Name:GENERAL-Division office Minor Irrigation-Painting , Shelf , Window Blinds and Maintanance work-General Civil Work

敨攠杮湩敥⁲湩挠慨杲⹥愠摮攠捸畬敤⁳桴⁥慲整漠⁦牦浡⁥畳灰牯獴䑏㐱㠸㌱㈯㈰ⴵ〲㘲债潲楶楤杮愠摮映硩湩⁧汰楡畍瑬灩牵潰敳䌠浥湥⁴潢牡⁤䠨杩⁨牐獥畳敲猠整浡挠牵摥 獡瀠牥䤠⁓›㐱㘸ⰲ眠瑩⁨畳瑩扡敬猠牣睥⁳潦⁲楦牢⁥散敭瑮戠慯摲椠散汩湩⁧瑥⹣挠浯汰瑥⁥昨慲敭眠牯潴戠⁥慰摩猠灥牡瑡汥⥹㨠㔱浭琠楨正挠浥湥⁴潢牡潤
ㄲ㌮ㄮ债潲楶楤杮愠摮映硩湩⁧汧穡湩⁧湩愠畬業楮浵搠潯Ⱳ眠湩潤ⱷ瘠湥楴慬潴⁲桳瑵整獲愠摮瀠牡楴楴湯⁳瑥⹣眠瑩⁨偅䵄爠扵敢⁲ 敮灯敲敮朠獡敫⁴瑥⹣挠浯汰瑥⁥獡瀠牥琠敨愠捲楨整瑣牵污搠慲楷杮⁳湡⁤桴⁥楤敲瑣潩獮漠⁦湅楧敮牥ⴠ椠䌭慨杲⹥⠠䌠獯⁴景愠畬業楮浵猠慮⁰敢摡湩⁧桳污敢瀠楡⁤湩戠獡捩椠整⥭场瑩⁨汦慯⁴汧獡⁳慰敮⁳景㐠〮洠桴捩湫獥⁳眨楥桧⁴潮⁴敬獳琠慨〱杫猯浱�⸹〱⸰㨳牐癯摩湩⁧湡⁤楦楸杮愠畬業楮浵栠湡汤獥‬卉⁉慭歲摥‬湡摯獩摥⠠湡摯捩挠慯楴杮渠瑯氠獥⁳桴湡朠慲敤䄠⁃〱愠⁳数⁲卉㨠ㄠ㘸⤸琠慲獮慰敲瑮漠⁲祤摥琠敲畱物摥挠汯畯⁲牯猠慨敤‬楷桴渠捥獥慳祲猠牣睥⁳瑥⹣挠浯汰瑥㩥㔷洠ɭ潮DZ㤀ㄮ㜵ㄮ债潲楶楤杮愠摮映硩湩⁧牐ⵥ慬業慮整⁤敭楤浵搠湥楳祴映扩敲戠慯摲䤠㩓㐱㠵㨷㤱㠹洠牡敫Ɽ眠瑩⁨湯⁥楳敤搠捥牯瑡癩⁥慬業慮楴湯漠桴牥猠摩⁥慢慬据湩⁧慬業慮楴湯䜠慲敤䤭⠠硥整楲牯朠慲敤 湩猠敨癬獥眠瑩⁨捳敲獷愠摮映瑩楴杮⁳桷牥癥牥爠煥極敲Ɽ攠杤獥琠敢猠慥敬⁤楷桴倠䍖攠杤⁥敢摮湩⁧慴数㈠〮‰浭琠楨正漠⁦灡牰癯摥戠慲摮⠠楦瑴湩獧琠敢瀠楡⁤敳慰慲整祬⸩牐ⵥ慬業慮整⁤楷桴搠捥牯瑡癩⁥慬業慮楴湯漠敮猠摩⁥湡⁤瑯敨⁲楳敤戠污湡楣杮氠浡湩楡湯攠瑸牥潩⁲片摡ⵥ⁉䑍⁆潂牡⁤㠱浭琠楨正挠湯楦浲湩⁧潴䤠㩓㐱㠵⸷Ũ㤀ㄮ㘲ㄮ债潲楶楤杮愠摮映硩湩⁧㈱洠桴捩慰敮汬湩⁧牯瀠湡汥楬杮愠摮朠慬楺杮椠慰敮汬摥漠⁲慰敮汬摥愠摮朠慬敺⁤桳瑵整獲映牯搠潯獲‬楷摮睯⁳湡⁤汣牥獥潴祲眠湩潤獷⠠愠敲⁡景漠数楮杮映牯瀠湡汥椠獮牥獴攠捸畬楤杮瀠牯楴湯椠獮摩⁥牧潯敶⁳牯

rebates to be measured). Panelling for panelled and glazed shutters 25 mm to 40 mm thick.Marine plywood conformingto IS : 710
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete[email protected]:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)Æ
26.28.3:Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge25 mm average thicknessOD148921/2025-2026:Rust remover/Rust Converter Cleaning of rust /scales/corrosion from reinforcement bars should be carried out using acid based rust remover, Reebakleens RR of Fosroc or equivalent, or using alkalibased rust converters such as Feovert of Krishna Conchem. The materials is to be applied to the rusted metal bar, using brush and leaving it to dry for 30min. washing the surface with fresh water as required to exposed reinforcement bar at all height, including all material, labours, tools, temporary supports for structures, electricity, plant and machineries complete as per detail specification and as directed by engineer-in –charge and/or consultant. The Concrete surface area containing the cleaned rebars shall be measured for payment. oOD148922/2025-2026:Anti corrosive treatment to steel Providing and applying inhibition coats/system to exposed reinforcement bar also new bars, after cleaning, removing scales and rust completely as specified in 1.4, two component inhibitor Nitozinc primer std. of Fosroc or Master Emmaco P 130 of BASF or equivalent having specific gravity of 1.75 and solid content 57(+/-3).Adhesive bond strenth1.5n/mm2, 40 microns DFT per coat as approved by Enginner- in – charge and/or consultant shall be used as per manufacturers specification in two coats at all height, including all material, labour,tools, temporary support for structures, electricity plant and machineries, necessary surface preparation and necessary protection after and during work. The concrete surface area containing the rebars where the treatment is carried out shall be considered for measurement. Y
14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)Á14.21:Renewing bottom rail and / or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacture .×
9.7.4.1:Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Ply wood 7 ply, 9 mm thickDecorative plywood one side decorative veneer and commercial veneer on other face (Type I) conforming to IS 1328 BWR TypeÓOD170951/2025-2026:Supplying and fixing molded irul reaper of size3cmwidth x1.5cm thick counter fixing including all cost and conveyance of all materials , labour charges etc complete.... metre