Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.5 LAccepted-AOC HARI BHAVAN NORTH ARYAD ALAPPUZHA | ₹21.5 L | L1 | Accepted-AOC L1 |
| 2 | L2₹22.0 LRejected-AOC LSGD DIVISION ALAPPUZHA | ₹22.0 L | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | HARISH AND CO L1 | PHILIPOSE JOSEPH L2 |
|---|---|---|---|---|---|
| 1.00SITC OF MINI MAST LIGHT | |||||
| 1.00 | OD149332/2025-2026:Supply of Kesslec decorative pole 7M height above the ground level made out of GI, tubular pole ?T? washed and primered. (ASTM A123, with minimum average GI coating of 65?m.), having two sections,bottom section of minimum 1000mm (L) x 165mm dia and the top section with minimum of 6000mm(L) x 89mm dia, in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out. Design comply EN40 standard and basic wind speed 169kmph. The Embellishments are cast in iron and fitted to the column by grubs screw fitting. The embellishments shall be sealed to the column.The Pole Base plate should be with 280x280x14 mm. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240.. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. The complete pole treated with high quality epoxy zinc rich primer and thereafter coated with Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total pole thickness 165 micron). The pole shall have inbuilt junction box consist of connector for loop in loop out and provision for MCB. The pole shall be of omposite? construction designed to ?wind load? corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure with base plate
CAT REF: KESSSLEC 7M CHATSWORTH POLE PU PAINTED (MARINE GRADE) WITH HDGI BASEPLATE. | 16 | each | 40,000 ₹6.4 L | 37,900 ₹6.1 L |
| 1.00 | OD149334/2025-2026:Supply of Kesslec PORT NU 75W classic LED street lantern, BIS certified with a luminaire body made of spun aluminium, permanently sealed optical block (IP66) with heat sink and an anti UV PC protector (IK09) fitted with a Vent Plug pressure equalisation unit, fixed onto a hinged spun aluminium frame, control gear compartment (IP65) for tool free opening and closing. Highly efficient temperature resistant lenses for symmetric light distribution with several optical options providing excellent photometry to optimally cater to different applications. Suitable for suspended mounting or a galvanised painted mounting bracket for Post Top version. Overall system efficiency of 120lm/W at correlated colour temperature (CCT) of 3000K colour rendering index (CRI) >70 (optional 80 CRI) and L70 rated lifetime of 50,000 hours. Electrical Class I rated voltage 240Vac, Power Factor 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes).
CAT REF : KESSLEC PORT NU 75W WW LED | 16 | each | 32,000 ₹5.1 L | 33,390 ₹5.3 L |
| 1.00 | OD149790/2025-2026:Supply and fixing of Threaded rod foundation bolt 4nos of 8.8 Grade M20 size in 500mm length using chemical anchoring vertically on the footpath. The bolt shall be anchored minimum 10cm inside main concrete and through top slab including 2 nuts washers as required. | 8 | each | 14,000 ₹1.1 L | 14,590 ₹1.2 L |
| 1.00 | OD149333/2025-2026:Supply of single side decorative bracket having length of 750mm, hot dip galvanised and after that two coats of epoxy primer and PU painted tightned to the pole top with stainless steel grub screws tomount the luminaire.
CAT REF: KESSLEC HDGI POST TOP CASCADE BRACKET 750MM SOH | 16 | each | 16,000 ₹2.6 L | 16,130 ₹2.6 L |
| 1.00 | 90.15.3.7:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x16 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 8 Meters | 2 | each | 27,000 ₹54,000 | 27,700 ₹55,400 |
| 1.01 | 90.15.4.8:Supply Conveyance, installation, testing and commissioning of 120W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | 6 | each | 9,000 ₹54,000 | 12,175 ₹73,050 |
| 1.01 | OD153210/2025-2026:SITC of 150W LED Flood light output 120lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor >0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | 6 | 1 nos | 10,000 ₹60,000 | 13,263 ₹79,578 |
| 1.01 | 14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels | 4 | sqm | 412.69 ₹1,650.76 | 412.69 ₹1,650.76 |
| 1.01 | 14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement). | 8 | cum | 10,962.26 ₹87,698.08 | 10,962 ₹87,696 |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
10 Sept 2025, 4:00 pmClosed
Executive Engineer (Electrical
Executive Engineer ( Electrical), PWD Electrical Division,Terrus Floor, District Collectorate Building, Alappuzha.
GENERAL-Kuthiyathodu Bridge-Construction of Kuthiyathodu bridge across Pampa river in Chengannur LAC in Alappuzha District-General Electrical Work
2025_PWD_793687_1
PWD/BLDG/TR/8919/2025-6-1-1
Open Tender
Electrical Works
Chengannur
Please refer Tender documents.
13 documents required · 13 mandatory
₹2,760
Yes
₹50,000
Yes
6 Jan 2026
2 Sept 2025
12 Sept 2025
2 Sept 2025
10 Sept 2025
2 Sept 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1310927.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid