REPAIR TO PATH, KERBS, PAINTING AND CERTAIN MISC B/R WORKS RELATED TO CGP IN DOMESTIC AREA AT AFA HYDERABAD

Amount

M & L Preparation of old painted surfaces on concrete surfaces plain or moulded, of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint ) etc, complete all as specified and directed.

M & L for preparing old chequered/interlocking path surfaces including aeroplane bases and applying one coat of superior textured finish exterior paint like sandtex matt ( Red Colour) or equivalent approved make all as specified and directed by Engineer-in-Charge.

M & L for preparing old steel surfaces of any description, exc 10 cm width or girth and applying one coat of Aluminium paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparing old painted steel and iron surfaces of any description, exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforcement cement concrete (of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC TypeB1 1:2:4 (using 20 mm graded aggregate) as in Beams/bands cantilevers, bressummers, lintels over 1.5m span

M& L for form works to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including support , overhangs etc. for rough finished surfaces complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or securing with clips complete all as specified and directed.

S&F mild steel TMT bar 5mm dia and over upto and including 10mm dia as in stirrups, spacers & binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia or securing with clips complete all as specified & directed.

Demolition of brick work or stone/boulders, pcc block masonry built in Cement Mortar or cement lime mortar including all quoins, arches, pillars etc excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as directed.

M&L providing precast cement concrete jallies, 25mm thick type B0 1:2:4 (12.5mm graded aggregate) and set in CM 1:6, (measured solid), including all mouldings all as specified.

M & L for Pre-cast cement concrete block masonry with solid blocks, Type C1 1:3:6 (20mm graded aggregate) exc. 10 cm in width and setting in cement mortar 1:6, complete

M&L for plastering in external wall surfaces of 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed by Engr -in- charge.

M&L for preparation of newly plastered surfaces of external walls and applying two coats cement base paint over a coat of cement primer complete all as specified and directed by the Engineer-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in ground floors and pavings n exc 15 cm thickness (below or above ground level) any position and disposed off to a distance exc. 1.5 km and not exc. 5.0 km all as directed by Engr-in-Charge.

Dismantling interlocking/paver block floor, hearth or wall tiling including cement sand mortar bedding and removing rubbish of the premises complete all as specified and directed by Engr -in- charge.

M&L for 75 mm thick type D-2 PCC 1:4:8, (40 mm graded agg) for sub base of floor all as directed.

M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for laying of floor finish complete all as specified and as directed.

M&L Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry colour to match in floors all as specified and as directed.

M&L 50mm thick sand filling under floors of interlocking tiles including watering and consolidation all as specified and as directed.

M&L 60mm thick machine pressed precast concrete with grey cement and pigment interlocking paver block any shape and size confirming to IS-15658- 2006 of 60 mm thickness M-35 grade with grey cement all as directed.

M/L PCC 1:2:4, type B2 (40 mm graded agg) for 100 mm thick path/ flooring without using extra cement all as directed.

M&L PCC 1:3:6, type C-2 (40 mm graded agg ) for plinth protection 75 mm thick, finished without using extra cement all as directed.

M&L for forming Consturction joints 30 mm deep x 10 mm wide, filled with sealing compound Grade B.

M&L for forming Dummy joints 50 mm deep x 10 mm wide, filled with sealing compound Grade B.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, as in valley gutter, ridge of roof, wall and cladding etc

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F of Rolled sections of Fe-410-W (Gde-E-250) quality-B as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

S&F plates (plain or corrugated) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410(Gde-250)

S&F Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 but n exc 10 cm long dia of shank 11 to 15mm.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, chajjas, fixed with self tapping screws as specified.

Deepika Enterprises (BID ID -3313829)

Sri Sai Krishna Construction (BID ID -3307698)

SAI RAM CONSTRUCTIONS (BID ID -3303698)

NS Enterprises (BID ID -3308415)

S J REDDY (BID ID -3307820)