Urgent mtc of road from KN-Dangacherra road to Thirtharoy para (L-500.00km) under Dasda Sub-Division, PWD(RnB) during the year 2025-26/ SH- Construction of RCC Box Cell ( 2.00 m X 2.00 m ) including approach works and brick soling etc.

Excavation for Structures B. With dewatering. Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, dewatering, construction of shoring, shuttering & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material. I. Ordinary Soil (ii) 3 m to 6 m depth

Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200 I. Sand Filling

Providing concrete for plain concrete ( using jhama brick aggregate) in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centring, shuttering, staging etc. but excluding reinforcement ) a) I. P.C.C grade M 10 (using jhama brick aggregate ) (ii) Nominal mix 1:3:6

Providing concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement). IV. RCC Grade M-20

Plain/reinforced cement concrete in substructure complete including formwork as per drawings & MoRD technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204. (including centring, shuttering staging etc but excluding reinforcement) VI. R.C.C grade M-25 i) Upto 5.00 Mtr height.

Supplying, fitting & placing Thermo - Mechanically treated bar/ Cold twisted deformed steel bar in foundation complete as per drawings & MoRD technical specification Clauses 1000, 1202.

Supplying, fitting & placing Thermo - Mechanically treated bar/ Cold twisted deformed steel bar in substructure complete as per drawings & MoRD technical specification Clauses 1002, 1005, 1010 and 1202

Construction of R.C.C railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line & grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm including reinforcement as per drawing and MoRD technical specifications Clauses 800, 900 and 1208.3 (including centering, shuttering, staging etc. and reinforcement).

Providing weep holes in brick masonry/ stone masonry,plain/reinforced concrete abutment, wing wall,return wall with100mm dia AC pipe or PVC pipe (110mm OD of 6.0 kg/cm2 pressure) extending through the fullwidth of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRD technical specification clauses 614, 709, 1204.3.7.

Providing & laying filter media with jhama brick aggregates as per specification toa thickness of not less than 600mm with smaller size towards the soil & bigger size towards the wall & providing over the entire surface behind abutment, wingwall, return wall to the full height,compacted to firm condition complete as per drawing and MoRD technical specification clause1204.3.8.

Flat Brick soling Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412.

Brick edging laid length wise Providing and laying brick edging laid lengthwise on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412.

Excavation in Soil with Dozer with lead upto 100 m. Excavation for roadway in soil by mechanical means with Dozer including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per MoRD Technical Specification Clause 302.3.