PERIODICAL SERVICES INTERNAL TO MH BLDG AND CERTAIN MISC B AND R WORKS AT PANGODE MIL STN TVM

Amount

M&L Washing,rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper to wall including preparation of surfaces complete all as specified and directed.

M&L for preparing old surfaces of wall and applying two coats of oil bound distemper over a coat of chalk primer including complete removal of existing treatment complete all as specified and directed.

M&L for Applying one coat of acrylic exterior emulsion water proofing painting including prepartion of old surfaces of wall (up to four storey bldg) as per manufactures instructions ) complete all as specified and directed.

M&L for Brooming down and preparing old surfaces of ceiling and applying one coat of white wash on old decorated surfaces complete all as specified and directed.

M&L for Brooming down and preparing old surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed.

M&L Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (upto four storey building) complete all as specified and directed.

M&L Preparation of old surfaces of steel of any description over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down of cement plaster of any description incl hacking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of concrete surfaces finished fair and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3 on fair faces of concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for Preparation of new surfaces of ceiling, and applying three coats of white wash complete all as specified and directed.

M&L applying two coats of acrylic exterior emulsion water proofing painting over one coat of primer including prepartion of new surfaces of wall complete all as specified and directed.

M&L two coats of oil bound distember over a coat of primer including prepartion of new plastered surfaces of wall ver 10 cm width or girth complete all as specified and directed.

Taking down chowkats or frames exc. 1.5 Sqm but not exc. 4 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.

S&F Solid PVC Door Frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed.

M&L Plain, solid, straigh chowkats and frames of 2nd class HW, wrought framed rebated on the solid,n rounded or chamfered, put togther with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L 2nd class hard wood 35 mm thick Plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides(feather edged) or of veneered particle board medium denisity wood particle board medium denisity, wood particle board with commercial face veneers: supplied and fitted to chowkats all as specified by Engr-in-charge.

S&F Aluminum door/windows using powder coated aluminum section, including necessary joining cleats,glazing clips, rubber neoprene packing, handles aluminum snap beading screws etc powder coating of any colour (thickness of powder coating minimum 50 micron ) complete all as specified and directed.

S&F Door closer hydralulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm width and weight between 61 to 80 Kg and fixed using aluminium extruded section all as specifieed by Engr-in-charge.

S&F Brass Mortice lock of 4 Levers, vertical type, of size 100mm complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor (Overall length of cover plate 150mm) complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminiumallow sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to fimber frame work complete all as specified and directed.

M&L Sheet glass ordinary quality and glazing with rubber neoprene packing in square exc 0.5 sqm in each pane 5.5 mm thick glass or all as specified and directed by engineer in charge.

M&L Sheet glass ordinary quality and glazing with rubber neoprene packing in square exc 0.5 sqm in each pane 4mm thick glass or all as specified and directed by engineer in charge.

M&L for preparation of new wooden surfaces and applying two coat of synthetic enemel paint over a coat of prink primer complete all as specified and directed.

S&F 100 mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised , type C21complete complete all as specified and directed.

S&F Aluminum anodised, barrel tower bolts of extruded section and fixed of 150mm long.

Ditto all as per Item No 31 here-in before but for 200mm long

S&F Aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminum alloy and fixed of 300mm long complete all as specified and directed.

S&F 150mm long aluminum handles cast type anodised complete all as specified and directed.

Dismantling of steel window of any size and any description and in any position including cutting of legs etc complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded complete all as specified and directed.

S&Fin repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L sheet glass ordinary quality 3 mm thick and glazing with oil putty or wooden beads n.exc 0.50 sqm in each pane complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L screed bed or bedding layer of mortar 15mm thick in cm 1:6 for laying floor finishes all as specified and as directed.

M&L rendering in cement mortar 10 mm thick for skirting / dado in CM 1:4 complete all as specified and directed.

M&L vitrified ceramic tiles light shade 8 to 10 mm thick ( Square/rectangular ) polished area of each tiles not exc 0.36 sqm as in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Vitrified Ceramic tiles light shade 8 to10mm thick (square/rectangular) polished, any shade, area of each tile n. exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match in skirting complete all as specfied and as directed by Engr-in-Charge.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/Rectangular ) area of each tiles exceeding 0.11 Sqm but not exceedng 0.18 sqm, as in floors etc, set and jointed neat cement slurry and pointed with colour cement to match complete all as specified and directed.

M&L for glazed ceremic coloured tiles of size 450x300x7mm thick as in skirting/dados set and jointed in neat cement slurry and pointed with coloured cement to match, non skid joint free tiles complete all as specified and directed.

S&F in repair Bib tap fancy type CP 15mm dia of pipe with crutch or butterfly handle screwed down screwed for iron pipe or ferrule and fixed complete all as specified and directed.

S&F in repair PVC connection 15mm dia 450mm long with 02 Nos brass check nuts with washer etc complete all as specified by Engr -in-Charge

S&F in repairs waste fittings brass chromium plated 32 mm/40mm dia for wash hand basin, glazed ware sinks etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified by Engr-in-Charge.

S&F in repairs viterous china wash basin, white flat back size 550mm x 400 mm including brackets with waste pipe including cutting for and pinning in ends of brackets or erecting stand with grating fixing to floor making good, fancy type complete all as specified and directed.

S & F in repairs chromium plated brass shower roses 125 mm size with or without swivel joints including fixing to steel pipe or union. all as specified by Engr-in-charge.

Supply only of PVC valveless, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle incl brackets capacity 10 ltrs and connection to pipe complete fancy type all as specified and directed.

S & F in repair Pillar taps 15mm dia cast copper alloy with capstion heads, chromium plated , fancy type screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed all as specified by Engr-in-charge.

S & F in repairs Stop valve cast copper alloy,screwed down, high pressure fancy type chromium plated with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs Stop valve cast copper alloy,screwed down, high pressure fancy type chromium plated with long shank and cup (concealed type) screwed both ends for 15mm dia iron pipe or for unions and fixed, all as specified by Engineer -in-Charge.

S&F in repairs grating 125 mm dia with waste hole complete all as specified and directed.

S& Fixed in repairs vitreous china squatting pan , 'orissa' pattern, size 580 X 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) including connection to trap, and to flushing pipe ,antisyphonage pipe, etc. complete includig making good to floor. complete all as specified and directed.

S&F Fixed in repair of viterious china wash down water closet pan (padestal pattern), superior fancy type white (excl fixing bolt, flushing cistern and flush type) incl connection to drain (or outgoing pipe) and to flushing pipe, anti shyphonage etc with seat cover complete all as specified and directed.

S&F in repair plastic water closet seat cover any colour closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repair Health faucet with push bottom flexible PVC pipe with steel lining of 1 mtr long PVC chromium plated suitable for 15mm pipe complete all as specified and directed.

S&F 16mm dia bore UPVC tubing in repair ASTM 1784 Sch 80 class III fixed complete to walls, ceiling or in floors etc, including taking down existing pipe, etc in(Upto four storey building) including using of necessary scaffolding complete all as specified and directed.

.-Ditto- all as per item ser No.62 above but for 20mm dia bore

.-Ditto- all as per item ser No 62 above but 25mm dia bore

Dismantling of wall and ceiling boards or insulation boards any thickness including cover fillets etc complete all as specified and directed.

S&F Non Asbestos decorative type fibre cement building boards , 4 mm thick fixed or laid / inserted to timber / GI / Aluminum frame work with screws on ceiling complete all as specified and directed.

M&L For Anodised aluminum snap grid frame work for false ceiling size 605 x 605 mm complete all as specified and directed.

S&F Plain mild steel wire 2.0 to 2.5 mm dia galvanised class 3 in detached work sutch as for mosquto nets and fixing to straining bolts, hook, eye, etc complete all as specified and directed.

S&F viterous china wash basin, oval type including brackets with waste pipe including cutting for and pinning in ends of brackets or erecting stand with grating fixing to floor making good, fancy type complete all as specified and directed.

S& F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes & pipes includings bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.

M&L for 19-20 mm thick granite slab in any size in black colour, machine cut, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone slab including cutting and polishing with 15 mm thick screed bed in cm 1:4 including demolition existing finish / slab complete all as specified and directed.

Demolition of cement concrete (un reinforced) in roofs, floor ( other than ground floors) beams, staircase , landings , chajjas and similar suspended work complete all as specified and directed.

M&L PCC 1:2:4 type B0 with 12.5 mm graded granite stone agggregate 25 mm thick over RCC roof complete all as specified and directed.

M&L rendering in CM 1:3, 10 mm thick mixed water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement. complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately.

Supply only integral water proofing compound @3 % by weight of cement complete all as specified and directed.

Dismantling of single layer Mangalore pattern or similar tiles in roofing including ridge tiles(up to four storey bldg) complete all as specified and directed.

M&L Roof tiles , mangalore pattren, interlocking at side joints, laid dry (upto four storey building) complete all as specified by Engineer-in-charge.

All as per item No 77 above but except tiles.

M&L Ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cm mortar 1:6 (upto four storey building) complete all as specified and directed.

All as per item No 79 above but except tiles.

Dismantling fillets for tiles battens, rafters, purlins etc under 40 sq.cm in section (framed work) all as specified and directed by engr-in-charge.

M&L II nd class hard wood clean sawn plain fillets square, rectangular or triangular in section, secured with nails or brads sectional area exc 13 but n exc 25 sq.cm complete all as specified and directed by Engineer-in-charge.

All as per item No 82 above but except fillets

S&F 110mm dia of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls including Taking down cast iron pipes/ PVC pipe including fittings by burning out lead joints etc to facilitate dismmentling old serviceable fittings/pipe laid in trenches floors or fixed to walls all as directed including earth work. Demoltion of PCC/Brick work and making good to match with existing surfaces (upto four storey building) including necessary scaffolding complete all as specified and directed.

.-Ditto- all as per item ser No.84 above but 75mm dia

Taking down existing aluminium door frames including shutter exc. 1.5 Sqm but not exc. 4 Sqm and re-fixing the same opening after carry out the necessary repair all as speified and directed by engineer in charge.

S & F PVC ventiltor fixed type with solid frame of size 45mmx70mm including louvers frosted glass of size 3mm thick including MS guard bar of 10mm dia spacing 150C/C and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with PVC beading including painting to steel surfaces and taking down the existing ventilator complete all as specified and directed.

S & F in repairs worn out wooden pelmet boxes / cub board of 18/19 mm prelaminated particle board, interior grade prelaminated one side with decorative choice lamination other side balancing white lamination complete all as specified and directed.

.-Ditto- all as per item ser No.88 above but 12mm thick

B.LAMBODHARAN

S K ENGINEERS

N SADANANDAN PILLAI

M/s G.Ramachandran