Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹30.0 LAccepted-AOC 22 1685 ST JACOB CHURCH LANE PAMBAIMOOLA EDACOCHIN ERNAKULAM KERALA 682010 | COCHIN | ERNAKULAM | KERALA | 682010 | 1 | Accepted-AOC AOC | |
| 2 | 2₹33.0 L+₹2.4 L (7.67%)Rejected-Finance | 2 | Rejected-Finance not being L1 | |
| 3 | 3₹33.2 L+₹2.6 L (8.48%)Rejected-Finance DOOR NO 68 2963 E3 MANDAKKARA ROAD AYYAPPANKAVU ERNAKULAM KERALA 682 018 | ERNAKULAM | ERNAKULAM | KERALA | 682018 | 3 | Rejected-Finance not being L1 | |
| 4 | 4₹33.3 L+₹2.7 L (8.85%)Rejected-Finance | 4 | Rejected-Finance not being L1 | |
| 5 | 5₹33.7 L+₹3.0 L (9.95%)Rejected-Finance | 5 | Rejected-Finance not being L1 |
Tender Value
₹31 L
EMD Value
₹62,000
Closing Date
2 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I R AND D KOCHI
GE I R AND D KOCHI, THRIKKAKARA,KAKKANAD, KOCHI 682021
ADDITION ALTERATION TO BUILDING NO P-18 IN TECHNICAL AREA AT NPOL KOCHI
2023_MES_609786_1
8236E8AGERDK
Open Tender
Civil Works
Item Rate
90 days
AGE I RD KOCHI
as per tender documents
6 documents required · 6 mandatory
₹500
Yes
AGE I R AND D KOCHI
₹62,000
Yes
15 May 2025
19 Jul 2023
4 Aug 2023
19 Jul 2023
2 Aug 2023
26 Jul 2023
Amount
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
M&L Cement concrete flooring 40 mm thick 1:2:4 (with 20 mm nominal size stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
M&L Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in any colour, shades, laid on 20 mm thick bed of cement mortar 1:4, jointing with grey cement slurry @ 3.3kg/ sqm including pointing the joints with white cement and matching pigments etc., complete
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
M&L 1st quality ceramic glazed floor tiles of size 450x300mm conforming to IS : 15622 (thickness to be specified by the manufacturer) 1st quality of approved make and colours in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
M&L for 12 mm cement plaster of mix 1:6 and finishing the surface even and smooth without using extra cement, complete all as specified and as directed.
M&L for 15 mm cement plaster on the rough side of brick wall of mix 1:4 and finishing the surface even and smooth without using extra cement, complete all as specified and as directed.
Providing and laying autoclaved aerated cement blocks masonry with150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately).
M&L for Two coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and including applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface complete, as per manufacturer's specification.
M&L for White washing with lime to give an even shade on Old wall surfaces
M&L for Distempering with one coat of1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade on Old surfaces including preparation of surface by removing old paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete
M& L for two coat of weather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer on newly plastered wall surfaces including preparation of surfaces including removing old paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete and finishing walls with Premium Acrylic Smooth exterior antifungal paint with Silicone additives of required shade with Two coats applied @ 1.43 ltr/ 10 sqm over existing surface
Taking out doors, windows and clerestory window shutters (steel or wood) o f area 3 sq. metres and below including stacking within 50 metres lead
M&L for 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube ofsize 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to theshutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).
Providing and fixing factory made UPVC/PVC door frame made of UPVC/PVC extruded sections profile size 48x40 mm having an overall dimension as below (tolerance±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the doorframe to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in- charge
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, Powder coated aluminium (minimum thickness of powder coating 50 micron) straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Note: 1) The weight of the rubber gasket / beading etc will not be measured with weight of aluminium sections. 2.Glazing, paneling and dash fasteners to be paid for separately
M&L Second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
Providing and fixing ISI marked flush door shutters of 35mm thick conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete 1:1.5:3 in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement.
Providing and fixing ISI marked SS butt hinges 100x58x1.90 mm bright finished with necessary screws etc. complete :
Providing and fixing ISI marked oxidised SS. tower bolt size 150x10mm black finish,(Barrel type) with necessary screws etc. complete
Providing and fixing ISI marked oxidised SS. sliding door bolts 300x16 mm with nuts and screws etc. complete
Providing and fixing ISI marked oxidised SS. handles 125 mm conforming toIS:4992 with necessary screws etc. complete
M&L Pin headed glass panes of 4 mm thick in doors, windows and clerestory windows shutters (Area of opening for glass panes excluding portion inside rebate shall be measured
M&L Float glass panes 4 mm thick glass pane complete
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required
Providing and fixing toilet paper holder C.P. brass of standard size
Providing and fixing chromium plated health faucet with flexible hose 1 meter with wall hook complete all as specified and as directed by Engineer-in-Charge.
Providing and fixing White Vitreous China Wash basin size 630x450 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete including taking down old WHB all as specified and as directed.
Dismantling W.C. Pan of all sizes including disposal of dismantled materials all complete as per directions of Engineer-in Charge
Providing and fixing mirror of Rectangular shape 453x357 mm of superior glass and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing
S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed.
Providing and laying Vitrified tiles Size of 600x600 mm in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints.
Providing and laying Vitrified tiles Size of 600x600 mm in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints
Providing and fixing unplasticised PVC connection pipe with brass unions 15 mm nominal bore 45cm length
S&F PVC (SWR) floor trap, 75mm dia of outlet, plain with grating including jointing with solvent cement, complete all as specified and directed.
S&F High density polyethylene (HDPE) flexible waste pipes of pressure rating 6 kgf/sq. cm, 50mm bore, complete all as specified and directed. Providing and fixing unplasticised PVC connection pipe with brass unions
Providing and fixing C.P. brass stop cock (concealed) 15 mm nominal bore of standard design and of approved make conforming to IS:8931.
Providing and fixing C.P. brass angle valve 15mm nominal bore for basin mixer and geyser points of approved quality conforming to IS:8931
Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
Providing and fixing gun metal gate valve with C.I. wheel 25 mm nominal bore of approved quality (screwed end)
Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes within 50 metres lead as per direction of Engineer in-Charge
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,15mm bore having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 20 mm bore Pipes dia ,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes Concealed work, jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 25 mm bore Pipes ,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of Concealed work, cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipe/ drain pipe 110 mm dia Single socketed pipes conforming to IS : 13592 Type A, including jointing with sealing conforming to IS : 5382.
Providing and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, 75mm bore, complete all as specified and directed.
Providing and fixing PVC (SWR) junction single, (Single T) equal or unequal, with access door, 110mm bore, complete all as specified and directed.
Providing and fixing PVC (SWR) reducers, 110mm bore, complete all as specified and directed.
Providing and fixing PVC (SWR) vent cowl, 110mm bore, complete all as specified and directed.
Providing and fixing PVC (SWR) bends any radius, 110mm bore, with access door, complete all as specified and directed.
Providing and fixing PVC (SWR) bends any radius, 75mm bore, with access door, complete all as specified and directed.
M&L for plinth protection 75mm thick with saucer drain of cement concrete 1:3:6 over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
Providing and fixing tiled false ceiling of PVC laminated gypsum board panels with PVC lamination on one side and aluminium foil on other side of size 600x600 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, and providing 6 to 7 mm thick board made with PVC laminated gypsum board panels with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
Providing and fixing Steel work of grade Fe 410 in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete, Hot finished seamless type tubes
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for prepainted galvalume aluminium zinc coating GI based plain sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in ridges, valleys hips etc fixed with self tapping screws complete all as specified and as directed
M&L Painting with synthetic enamel paint One coat on old steel work of approved brand and manufacture of required colour to give an even shade :
M&L for Poly Urethane based water proofing treatment to existing RCC roof slab with the following specifications.
i) Cleaning the existing surface by mechanical means to make it free from any bituminous residue/dirt, oil and grease all as directed by Engineer In Charge. ii)M&L for cracks treatment by cutting open cracks and cleaning it from dirts , loose materials etc and filling with Polyurethane based sealant with and including application of PU based primer all as directed by Engineer In Charge. iii)M&L applying water based polyurethane modified dispersion(single component, cold applied , non toxic , VOC compound) in three coats including one coat of primer of same material after dilution of water at 50% or specific primer matching same material as per manufacturer specification and as directed by Engineer In Charge.
Note:- Properties of Poly urethane based chemical shall conform to following technical parameters
a)Highly elastic b)UV resistance c)Adhesion to concrete > 1N/ Sqmm d)Tensile strength-not less than 2.0 N/Sqmm for free film Elongation not less than 300% e) Solid content by weight not less than 60% f)Air/Water permeability BSEN 12390 at 5 bar -72 hours should be NIL and minimum dry film thickness of water proofing membrane must be 1.00mm g)Accelerated weathering(ASTM 453) Pass 1000 hours
h) Reaction to fire - Non inflammable j) To be applied by the rep of manufacture’s authorised applicator only. Contractor has to be provide manufacture’s test certificate for the above mentioned Technical parameters and purchase vouchers. k)Removal of existing treatment to be paid separately l)Roof slop to be ensured to avoid water ponding/logging m) 300mm height of vertical surface/parapet wall to be treated with the same specification Make:- Bostic, Berger, Fosroc, Sika, Asian or any other make approved by E-In -C"S branch
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m²
Cutting chases in brick masonry walls for placing pipes of any dia and making good the same with cement concrete 1:3:6 (using 20mm nominal stone agregate), including necessary plaster and pointing in cement mortar 1:4
Earth work in surface excavation any type of soil not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:
Providing and laying in position cement concrete 1:3:6 (using 40mm nominal stone aggregate) of excluding the cost of centering and shuttering - All work up to plinth level
Earth work in excavation any type of soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge.
Earth work in excavation any type of soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 3m, as directed by Engineer-in charge.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
Material and labour for 1:4:8 (using 40 mm nominal size graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.
Providing and laying in position specified grade of reinforced cement concrete, 1:1.5:3 ( graded stone aggregate 20 mm nominal size), excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level as in footing
Providing and laying Reinforced cement concrete work 1:1.5:3 (using graded stone aggregate 20 mm nominal size) in walls (any thickness), butresses, columns, pillars, piers, abutments, posts and struts etc. upto plinth level excluding cost of centering, shuttering, finishing and reinforcement
Providing and laying Reinforced cement concrete work 1:1.5:3 (using graded stone aggregate 20 mm nominal size) in beams, suspended floors, roof shaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
Centering and shuttering including strutting, propping etc. and removal Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
Centering and shuttering including strutting, propping etc. and removal Suspended floors, roofs, landings, balconies and access platform
M&L Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D.
Dismantling Asbestos Cement sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of
Dismantling cement asbestos or other hard board ceiling or partition walls including frame work including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
M&L for Painting with Two coats synthetic enamel paint of approved brand and manufacture to give an even shade on new steel surfaces
Providing and fixing powder coated aluminium grill (anodised transparentor dyed to required shade according to IS: 1868 with minimum anodiccoating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. Note: Only weight of grill to be measured for payment
Dismantling steel work in single sections including dismembering and stacking within 50 meters lead in channel, angles, tees and flats
Taking down existing roof treatment of any description including roof plaster and removing the debris to distance exc. 500m and depositing out side MD land all as directed.
M&L Rendering 12mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, mixed with water proofing compound and finishing the surface even and smooth without using extra cement, complete all as specified and directed. NOTE:- Water proofing compound shall be measured and paid separately under respective item of this Schedule.
Providing only water proofing compound
Taking down carefully old and unserviceable aluminium point wiring for light/fan/socket or power point complete including fittings such as switches, ceiling rose, pendants, regulators, sockets, bell, distribution boards and MCB's etc and making good disturbed surface of walls. floors etc to match with the existing surface complete all as specified and directed.
M&L for Point wiring for light point/ fan point/exhaust point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit for modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc as required.
M&L for sub main Wiring for 5Amp socket outlet point on independent board with 2x 1.5 sq mm FRLS PVC insulated copper conductor single core cable and earth continuity wire with similar 1x1.5 sq mm FRLS PVC insulated copper conductor cable (incl connecting to earth dolly) in surface/recessed medium class PVC conduit as required at site complete all as specified and directed.
M&L for sub main for 15Amp socket outlet point on independent board with 2x 2.5 sq mm FRLS PVC insulated copper conductor single core cable and earth continuity wire with similar 1x2.5 sq mm FRLS PVC insulated copper conductor cable (incl connecting to earth dolly) in surface/recessed medium class PVC conduit as required at site complete all as specified and directed.
S&F suitable size GI box with modular plate and cover in recess , including providing and fixing 3 pin 5/6A modular socket outlet and 5/6A modular switch, connections etc as required
S&F suitable size GI box with modular plate and cover in recess , including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16A modular switch, connections etc as required
M&L for sub main wiring earth wire with 2 x 1.5. Sqmm FRLS PVC insulated copper conductor single core and earth continuity wire with similar 1x1.5 sq mm FRLS PVC insulated copper conductor cable (incl connecting to earth dolly) in surface/recessed medium class PVC conduit as required at site for high bay light wiring and connecting terminals to DB/ switch board complete all as specified and directed.
S&F 3 PIN , 5A ceiling rose on existing junction box including connections
S&F 6 Module (200mmx75mm) GI box along with modular base& cover plate for modular switches (for highbay lights) in recess etc as required
S&F 6 Module Modular base & cover plate on existing modular metal boxes etc as required(for highbay lights
S&F modular switch type, 15/16 amp, 230 volts one module ( for High bay lights)
Supply & Fixing Recess mounted LED down lighter 2'x2' with housing made up of die cast aluminium for better thermal management, high transmitivity non yellowing PMMA diffuser for better light output and uniform light distribution without glare, power consumption<=36W, luminaries lumen>=3000lm, driver and accessories to be prewired, CRI>70, LED efficiency >80lm/W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC62471 & electrical insulation class 1 ,LED life with L70 criteris-37,000 hrs colour temp >6500k, Ingress protection IP-20, ambient temperature 0 to 450C, driver efficiency >85% , THD<10% as per IEC 61000-3-2, power factor >0.95, surge protection 2.5KV, multi stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM79 & LM80 certification complete all as specified and directed. Make:- Havells equivalent model in Philips / Crompton/ Wipro
Supply & Fixing LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption <=20W, luminaire lumen >=2000 lm, system efficiency of >= 100 lumens/W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC62471 & electrical insulation class 1, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficiency>85%, power factor > 0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria, multi stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level < 60 V DC as per IEC standard with LM70 & LM 80certification complete incl connecting up with three core flexible copper conductor of suitable size all as specified and directed. Make : Havells equivalent model in Philips / Crompton/Wipro
Supply & Fixing LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption <=10W, luminaire lumen >=1000 lm, system efficiency of >= 100 lumens/W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC62471 & electrical insulation class 1, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficiency>85%, power factor > 0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria, multi stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level < 60 V DC as per IEC standard with LM70 & LM 80 certification complete all as specified and directed. Make:- Havells or equivalent model of Philips / Crompton/ Wipro
Supply and Fixing LED highbay luminaire, wattage <=150 W with specially designed aluminum sheet heat sink for excellent heat dissipation, Polycarbonate high transmitivity diffuser for Uniform illumination and wider light distribution, Aluminium spun reflector to minimize the glaze as well as optimize the lighting performance, Integral product with LED, Driver and accessories pre wired in driver compartment, CRI>70, luminaire lumen ≥ 14850lm, System Efficacy ≥ 110lm/W, color temperature-5000K, IP rating ≥ IP65, 50000 burning hours as per L70 Criteria, Ambient temp-0 to 50DegC, Driver efficiency>85%, THD<15%, Power factor>0.95, Surge protection 4.0KV, Multistage Isolated Constant Current Operated driver with range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard with LM70 & LM 80certification complete all as specified and directed. Make:- Havells equivalent model of Philips / Crompton/Wipro
Supply , installation testing and commissioning Exhaust fan fan 230 Volt 50 Hz single phase AC supply ,300 mm sweep with louver complete with metal body powder coated with protective steel bird gaurd on wall including provision of 3 core 1.0 Sq mm cable from ceiling rose to exhaust fan including writing MES number on exhaust fan motor complete all as specified and as directed
Supply, Installation, testing and commissioning of 1200 mm sweep, BEE 5star rated, Ceiling fan with Brush Less Direct Current(BLDC) Motor, class of insulation :B, 3 Nos Blades, 30 cm long down rod, 2 nos conopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value(CM/M/W) minimum 6.00, air delivery min 210 cum/min, 350 rpm ( tolerance as per IS:374-2019) THD less than 10%, remote or electronic regulator unit for speed control and remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc, complete as required
S&F Industrial insulated plug and socket 63 Amp 3P+N+E 4 pole with straight plug 63 Amps 3P+N+E , wall / surface with including incomming MCB TPN 63 Amp, 4 Pole, all as specified an as directed
S&F Industrial insulated plug and socket 32 Amp 3P+N+E 4 pole with straight plug 32 Amps 3P+N+E , wall / surface with including incomming MCB TPN 32Amp, 4 Pole, all as specified an as directed
Dismantling and taking down exhaust fan any size for servicing by cleaning dust, filling cavities with filler and painting complete with synthetic enamel paint by spraying and re fixing the same in position, connecting and testing all as specified and directed.
Dismantling and taking down Air circulator fan any size for servicing by cleaning dust, filling cavities with filler and painting complete with synthetic enamel paint by spraying and re fixing the same in position, connecting and testing all as specified and directed.
M&L for sub main wiring along with earth wire with 2 x 6.0 Sqmm FRLS PVC insulated copper conductor ,single core cable and and earth continuity wire with similar 1x6.0 sq mm FRLS PVC insulated copper conductor cable (incl connecting to earth dolly) in surface/recessed medium class PVC conduit as required at site including connecting terminals to DB complete all as specified and directed. and incl taking down the old sub main wiring all as directed ( From MCCB VT TPN DB to MCB DB SPN 8 way
Supply & Fix VTPN DB with MCCB incomer ,Metal double door,415 V, three phase,8 way ready to use DBs provided with Neutral Bar, Mechanical Impact Strength IK 09 , Insulated busbar assembly, cement spill protector, color-coded interconnecting wire set, cable ties blanking plates and circuits identification labels suitable for MCCB's upto 250 Amp as I/C (Frame 1) and MCBs (TP/SP) as outgoing, IP 43 protection, module Optium F2+8+8+8, conforming to IS 8623-1 & 3, IEC 61439-1 & 3 including connection of incoming & out going cables using suitable size lugs and glands complete all as specified and directed.
S&F MCCB FP, 415 V,160 Amps50Hz with thermal magnetic release & Ics=100%Icu 16Ka adjustable overload min 80% to 100% complete all as specified and directed,
S&F MCB DB SPN double door 8-way sheet metal enclosure with category of IP-43 protection, 240V, with tinned copper 200 Amp rated bus bar suitable for MCBs, complete all as specified and directed. (as submain DB)
S&F MCB ,TP, 415 V, 63 Amps, 50Hz,"C'curve , 10 kA breaking capacity complete all as specified and directed ( for MCCB DB)
S&F MCB, TP, 415 V, 32 Amps, 50Hz,"C'curve , 10 kA breaking capacity complete all as specified and directed ( for MCCB DB)
S&FMCB, SPN, 240 V, 32 Amps, 50Hz,"C'curve , 10 kA breaking capacity complete all as specified and directed ( for MCCB DB)
S&F MCB,SP , 240 V, 20 Amps, 50Hz,"C'curve , 10 kA breaking capacity complete all as specified and directed ( for MCB DB)
S&F MCB,SP , 240 V, 16 Amps, 50Hz,"C'curve , 10 kA breaking capacity complete all as specified and directed ( for MCB DB)
S&F MCB,SP , 240 V, 6 Amps, 50Hz,"C'curve , 10 kA breaking capacity complete all as specified and directed ( for MCB DB)
Taking down /removing old unserviceable PVC insulated and PVC sheathed cable of 50 sqmm size onwall/ ceiling after disconnecting the terminal connectionetc and making good disturbed surface of walls. floors etc to match with the existing surface complete all as specified and directed.
Supply, laying , fixing and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 Core 70 sqmm fixed on walls/ceilings/floors/poles including provision of suitable hardware accessories connecting up complete all as specified and directed.
All as per SI.item No 117 here in before but 4 core 16 sq mm complete all as specified and directed.
All as per SI. item No 117 here in before but 4 core 10 sq mm complete all as specified and directed.
M & L for Earthing complete with using galvanised steel earth plate 60 X 60 cm X 6 mm thick electrode , buried directly in ground including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal/ coke and salt as required .
Providing and fixing 25mm X5MM GI Strip in 40mm dia GI Pipe from earth electrode including connection with G.I nut, bolt, spring, washer excavation and refilling as required.
M & L for GI tubing light grade, ISI marked, galvanised including short length , laid in trenches or fixed to walls and ceilings concealed, laid as cable protection, complete with all fittings of size 50mm bore of pipes, complete all as specified and directed.
All as per SI. item No 122 here in before but 32 mm bore complete all as specified and directed.
Supply, Install , testing and commissioning of 1.5 TR capacity, 230V, 50 Hz, single phase split type Air conditioning unit 5 star rating , inverter type com plete with drive motor, air cooled condenser with all accessories varied speed and dual rotary compressor, including fixing the outdoor units as per manufactures recommendation and fixing of indoor (high wall) unit on wall, providing and making interconnection, including refrigerent piping with nitryle rubber insulation and control cable from indoor unit to outdoor unit up to a distance of 3.0 mtr, power cabling ( Max 3.0 mtr from isolator/ enclosure) to unit, first charging of refrigerant gas (R32) incl cordless remote, drain piping of 25mm dia for connecting drain lines from indoor unit to maximum of 3.0 mtr to nearest drain points, outdoor support stand if required complete all as specified and directed. Make: Voltas / Blue star / LG
Supply and fix automatic electronic voltage stabilizer of 4.0 KVA capacity ,wall mounting type having features such as Intelligent time Delay system, Low and High Voltage Cut-off Protection, latest IC Technology to protect from power fluctuations, Thermal over load protection, wide input variation between 170V to 270V with output voltage stablized at 220 to 240V, with accuracy of +/- 2.5% and of following capacity suitable for split type Air conditioner complete all as specified and as directed by the Engineer -in -Charge. Make: V Guard/ Wintech/Vinitech
Material and labour for sub main wiring along with earth wire with 2 x 4.0 Sqmm FRLS PVC insulated copper conductor ,single core cable and and earth continuty wire with similar 1x4.0 sq mm FRLS PVC insulated copper conductor cable (incl connecting to earth dolly) in surface/recessed medium class PVC conduit as required at site including connecting terminals to DB complete all as specified and directed. and incl taking down the old sub main wiring all as directed (From Sub main DB/main board to Metal clad socket
S&F Sheet metal single pole and neutral enclosure, metal clad socket, , with two pin and earth plug and socket complete with one SPN MCB 20 Amps complete all as specified and directed.
N.O. Antony Contractors
ELAN ENGINEERS
PARAMBIL ENTERPRISES
K A ALIYAR
WELTRONENGINEERINGSERVICES
AMRITH ENGINEERS
Albert Rebello and Company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .