Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.9 LAccepted-AOC HOUSE NO 2734 2ND FLOOR PHASE 7 SAS NAGAR MOHALI PUNJAB | S A S NAGAR | PUNJAB | 140103 | L1 | Accepted-AOC Lowest Bidder. | |
| 2 | L2₹19.8 L+₹88,495.50 (4.67%)Rejected-Finance H NO 1566 2 SECTOR 30 B CHANDIGARH | NA | NA | 160001 | L2 | Rejected-Finance Other than lowest bidder. | |
| 3 | L3₹21.4 L+₹2.5 L (13.1%)Rejected-Finance 363 39KA HASSANGANJ BAWLI KUMAR COMPANY 363 39 KA HASAN GANJ BAWLI SAADAT GANJ LUCKNOW SAADATGANJ | L3 | Rejected-Finance Other than lowest bidder. | |
| 4 | L4₹21.6 L+₹2.6 L (13.7%)Rejected-Finance 0 AS ENTERPRISES DAYALACHACK HIRANAGAR KATHUA JAMMU KASHMIR 184144 | KATHUA | JAMMU AND KASHMIR | 184144 | L4 | Rejected-Finance Other than lowest bidder. | |
| 5 | L5₹21.8 L+₹2.8 L (14.8%)Rejected-Finance 19192 STREET NO 08 BIBI WALA ROAD OPPOSITE DAV COLLEGE BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L5 | Rejected-Finance Other than lowest bidder. |
Tender Value
Refer Docs
EMD Value
₹36,200
Closing Date
17 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) MC CHANDIGARH
GE (AF) MC CHANDIGARH
COMPLETION OF BALANCE WORK FOR PROVN OF CERTAIN WORK SERVICES IN OMQs AND SMQs AT SECTOR 31 AT BRD UNDER GE (AF) MC CHANDIGARH
2023_MES_610160_1
GE (AF) MC CHD/T-37/2023-24
Open Tender
Civil Works
Item Rate
180 days
CHANDIGARH
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) MC CHANDIGARH
₹36,200
Yes
13 Sept 2023
21 Jul 2023
19 Aug 2023
21 Jul 2023
17 Aug 2023
4 Aug 2023
Amount
M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.
M&L for Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for foundation etc. and getting out, complete all as specified and directed.
Material and labour for brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6), complete all as specified and directed.
Material and labour for cement concrete (1:2:4), type B-1, using 20mm graded crushed stone aggregate as in plinth courses, parapet, coping including necessary form work/moulds complete all as specified and directed.
M & L for form work to sides and soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works not exceeding 200mm thick of rough finished surface, complete all as specified and directed.
M & L for form work to sides and soffits of floor or roof beam lintels, shelves of rough finished surface, complete all as specified and directed.
M & L for reinforced cement concrete 1:1.5:3 type A-1 using 20mm graded crushed stone aggregate as in slab supported walls, beams, columns on floor/roofs, lintel, chajja, roof bend etc, complete all as specified and directed.
Supply and fix in position, mild steel bars TMT, 8mm dia for stirrups, cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.
Supply and fix in position, mild steel bars TMT, 10mm dia and over, cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in soft/loose soil after construction work in foundation, complete all as specified and directed.
Removal of surplus excavated soil to a distance not exceeding 50metre and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed.
Material and labour for Hardcore broken stone boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers 75mm thick, watered and rolled/rammed to a true surface, complete all as specified and directed.
M & L for 75 mm thick PCC 1:3:6 type C-2, using 40 mm graded crushed stone aggregate as in sub base floor & plinth protection, complete all as specified and directed.
M&L for 40 mm thick, PCC (1:2:4) type B-1 using 20 mm graded stone aggregates as in flooring finished even & smooth with using extra cement, complete all as specified and directed.
Supply and fix , galvanized steel water tubes, 15mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed. Make : Jindal/TATA/Surya.
Supply and fix , galvanized steel water tubes, 20mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed. Make : Jindal/TATA/Surya.
S&F PVC(SWR) Floor trap 100 mm with CP grating including jointing with solvent cement complete all as specified and directed.
S&F Vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white colour, with integral foot rests including flushing cistern 10litre and flush pipe, PVC connection with concrete bed for WC complete all as specified and directed.
M&L for 25 mm thick, PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregates as in flooring finished even & smooth with using extra cement, complete all as specified and directed.
M&L for Non skid ceramic joint free coloured tiles 400x400x 7 to 8 mm thick (square /rectangular ) in floors etc, set and jointed each in neat cement slurry and pointed in white cement to match tiles including 15mm thick screed in cement mortar 1:6 , complete all as specified and directed.
M&L for Glazed ceramic coloured tiles 300mm x 450mm x 7mm to 8mm thick as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles including 10mm thick rendering in cement mortar 1:4 , complete all as specified and directed.
M&L for rendering 15 mm thick on other than fair faces of brick surfaces or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5 mm in cement mortar (1:3) on ceiling and exposed surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick on wall surfaces in cement mortar (1:4) finished fair and even without using extra cement complete all as specified and directed.
M&L for prepration of newly plaster surface of wall and applying three coats of white wash complete all as specified and directed.
M&L for prepration of newly plaster surface of ceiling and applying two coats of white wash complete all as specified and directed.
M&L for preparation of new plastered of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.
M&L for preparation of new plastered of ceiling and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.
Supply and fixing Steel ventilator of Z section with top hung shutter including hinges, steel peg stay including painting with one shop coat of zinc chromite primer, complete all as specified and directed.
S&F Stainless steel wire cloth 0.36 mm niminal dia of wire and average width of aperture 1.40mm and with stainless steel wire staples complete all as specified and directed.
S&F figured glass pin head type, 4mm thick in steel frame glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, fixed in opening complete all as per specification, drawing and as specified and directed.
Supply and fixing, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet 5mm thick to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing in SSR Part-II, complete all as specified and directed.
Supply and fix, butt hinges extruded aluminium alloy, 100mm long, complete all as specified and directed.
S&F 200 mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150 mm aluminium handles cast type anodised complete all as specified and directed.
Material and labour for rendering 10mm thick in cement mortar (1:3) using WPC on surfaces of roof and parapet, finished even & fair without using extra cement, complete all as specified and directed. Note:- WPC shall be measured and paid separately.
M&L for APP (atactic paint proplene) modified pre febricated fine layer 3 mm thick and weighing not less then 3. 00 Kg/Sqm water proofing membrane reinforced with non- wooven polyster mat black finished over compatible primer @0.4 ltr per Sqm of density at 25 degree centigrade 0.87-0.89 Kg per ltr and viscosity 70-160 LPS cold stiched and torch application of mem brane with 70 Cms over lap as required after necessary preparation of the surfaces complete all as per manufactures instruction, including applying two coats of bituminous based aluminium paint over a coat of bituminous primer, complete all as specified and directed. Make : IWL India Ltd/ Pidilite Industries/ STP Ltd/ Sika. NOTE: The water proofing treatment shall be carried out by the Authorised applicator of the Manufacturers.
Supply only water proofing compound, complete all as specified and directed.
S&F Rotational moulded polythene water storage tank of 500 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I complete all as specified and directed. Make:- DI- PLAST/SINTEX/POLYCON
S&F 20mm dia bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.
S&F PVC (SWR) pipes 110mm dia Single socketed, in any length with rubber ring joints fixed to walls , laid in trenches, floors.etc complete all as specified and directed.
S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.
S&F 75mm PVC (SWR) cowl complete all as specified and directed.
S&F angle valve of PTMT, 15mm dia any colour high pressure screwed for iron pipe and fixed, complete all as specified and directed.
S&F stop valve of PTMT (concealed type) 15mm dia long shank & cup any colour high pressure screwed for iron pipe and fixed, complete all as specified and directed.
S&F 15mm dia bib tap fancy type standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90 gms, fixed complete all as specified and directed.
S&F Swivel shower of PTMT any colour for fixing with 15mm dia bore GI pipe ( weight not less 40 Grms) complete all as specified and directed.
S&F Vitreous china wash basin, white, size 550 x 400mm, including two nos brackets made of angle iron 40X40X5mm,length 60 cm fixed and make good the distrub surface complete all as specified and directed.
S&F waste coupling of PTMT (half or full threaded) 32 mm bore (minimum weight 45 gms) fixed complete all as specified and directed.
S&F LDPE PVC waste pipe 32mm dia, complete with 80cm long flexible for WHB complete all as specified and directed.
S&F Pillar taps standard of PTMT any colour, fancy type,high pressure screwed for (minimum weight not less then 110 gms), 15mm dia bore GI pipe, fixed complete all as specified and directed.
S&F Tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges, fixed complete all as specified and directed.
M&L for reinforced cement concrete M-25 design mix using 20mm graded crushed stone aggregate as in foundation, including footing, foundation beam, plinth beam, complete all as specified and directed.
M&L for reinforced cement concrete M-25 design mix using 20mm graded crushed stone aggregate as in columns, pillar, piers, post and struts, complete all as specified and directed.
M & L for form work to sides of footing, bases of column, raft and raft beams, side and soffits flat surface of rough finished, complete all as specified and directed.
M & L for form work to sides of pillars post, struts piers, column of rough finished surface of concrete, complete all as specified and directed.
M&L for keyed pointing to brick wall surface in cement mortar 1:4 cement complete all as specified and directed.
S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary etc, n exc 10 kg each bracket, for supporting to dressing table, door ,cupboard etc complete all as specified and directed.
Material and labour for preparation of old steel surface and applying one coat of synthetic enamel paint surfaces over 10cm width or girth, complete all as specified and directed.
Material and labour for preparation of old steel surface and applying applying two coats of synthetic enamel paint over and including a coat of red oxide primer over 10cm width or girth, , complete all as specified and directed.
Material and labour for 75mm thick plain cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate, as in floor, complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to IS-15658 of 60mm thickness M-35 grade, laid over and including sand cushion of 50mm thick, complete all as specified and directed. Note The manufacturer's test certificate and individual test certificate for tiles must be submitted for approval by the concerned authority prior to installation. Make:- Surya Kiran/NTC/NITCO
M&L for prepolished colour chequered cement concrete tiles area n.exc 0.16Sqm of thickness 10mm set and jointed in neat cement slurry in floor over and including 15mm thick in cement mortar 1:6 screed, complete all as specified and directed. Make:- Surya Kiran/NTC/NITCO/Jonson tiles
Material and labour for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in floors finished even and smooth using extra cement, complete all as specified and directed.
Material and labour for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base for pipes and manholes etc, complete all as specified and directed.
M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150/200mm bore pipe, complete all as specified and directed.
S&F 100 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) laid in trenches or in floors complete all as specified and directed.
S&F 100 mm cast iron bends/tees/cowl, complete all as specified and directed.
Material and labour for brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:4), complete all as specified and directed.
Supply and fix in position, mild steel bars TMT, 8mm dia cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.
M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate cover slab for man hole and gully trap covers etc including necessary form work, complete all as specified and directed.
MOHAMMAD RASHID
KUMAR AND COMPANY
AS Enterprises
M/S MANI GARG CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .