Annual Maintenance of Non VRF AC system of Secretariat Building, Assembly Building, Tripura High Court Building, Raj Bhavan and Chief Justice Bungalow Agartala ,Tripura for 01 year

Amount

Complete servicing of AC machines (Indoor & outdoor Unit) as per direction of the Engineer-in-charge.

(I)1.0/1.2/1.5/2.0 TR split type AC.

(II)1.5 TR window type AC.

(III)2.0/2.5/3.0/4.0/4.5 TR High wall Split, cassette and vertical AC

Leak testing of condenser & evaporator unit for performance and pressure testing etc and repair with brazing as per direction of the Engineer-in-charge. (I)1.0/1.2/1.5/2.0 High wall split and window type AC.

(II)2.5/3.0/4.5 TR High wall split, cassette and vertical type AC

Charging of fresh refrigerant gas (R-22) for 1.0/1.2/1.5/2.0/3.0/4.0 TR capacity High wall split/window/cassette / vertical AC system as per direction of the Engineer-in-charge.

Charging of fresh refrigerant gas (R-410) for 1.0/1.2/1.5/2.0/3.0/4.0 TR capacity High wall split/window/cassette / vertical AC system as per direction of the Engineer-in-charge.

Charging of fresh refrigerant gas (R-32) for 1.0/1.2/1.5/2.0/3.0/4.0 TR capacity High wall split/window/cassette / vertical AC system as per direction of the Engineer-in-charge.

Charging fresh refrigerant gas for refrigerator (R-134,Hydro Carbon, R-600, R-190) as per direction of the Engineer-in-charge.

Providing, fitting and fixing of hermetically sealed compressor for replacement of defective one of fixed speed AC system as per direction of the Engineer-in-charge. (With one year warranty)

(I) 1.0 TR capacity High wall split type AC.

(II)1.2 TR capacity High wall split type AC.

(III)1.5 TR capacity High wall split type AC.

(IV)1.5 TR capacity window type AC.

(V) 2.0 TR capacity High wall split and cassette type AC.

(VI)2.5 TR capacity High wall split and cassette type AC.

(VII)3.0 TR capacity High wall split and cassette type AC.

(VIII)4.0 TR capacity vertical split type AC.

Providing, fitting and fixing of hermetically sealed compressor for inverter technology AC machine as per direction of the Engineer-in-charge. (With one year warranty)

(I) 1.0 TR capacity High wall split and cassette type AC

(II) 1.5 TR capacity High wall split and cassette type AC

iii) 2.0 TR capacity High wall split and cassette type AC.

(iv)2.5 TR capacity High wall split and cassette type AC

(v)3.0 TR capacity High wall split and cassette type AC

vi)4.0 TR capacity High wall split and cassette type AC.

Providing, fitting and fixing of hermetically sealed copper condenser unit for replacing old one as per direction of the Engineer-in-charge.

(I) 1.0/1.2/1.5 TR capacity High wall split and window type AC.

(II) 2.0/2.5 TR capacity High wall split and cassette type AC.

(III) 3.0/4.0 TR capacity High wall split and vertical type AC.

Fitting, fixing of blower motor of Ac systems after rewinding I/C necessary replacement of bush, shaft etc with complete varnishing as per direction of the Engineer-in-charge.

Providing, fitting and fixing of scroll motor (A.C)of indoor unit split type AC system as per direction of the Engineer-in-charge.

Providing, fitting and fixing of scroll motor (D.C) of indoor unit for inverter technology split type AC system as per direction of the Engineer-in-charge.

Providing, fitting and fixing of swing motor of indoor unit split type AC system as per direction of the Engineer-in-charge.

Providing, fitting and fixing of relay of split type AC system as per direction of the Engineer-in-charge.

Providing, fitting and fixing of air filter of split type and window type AC system as per direction of the Engineer-in-charge.

Providing, fitting and fixing of indoor PCB circuit for inverter technology split/cassete/Vertical type AC system as per direction of the Engineer-in-charge.

(I)1.0/1.2/1.5 TR split type high wall AC.

(II)2.0 TR split type high wall AC.

(III)2.5 TR/ 3.0 TR split/cassette type high wall AC.

(IV)4.0TR vertical/cassette type AC.

Providing, fitting and fixing of outdoor PCB circuit for inverter technology split/cassete type AC system as per direction of the Engineer-in-charge.

(I)1.0/1.2/1.5 TR split type high wall AC.

(II)2.0 TR split type high wall AC.

(III)2.5 TR/ 3.0 TR split/cassette type high wall AC.

(IV)4.0TR vertical/cassette type AC.

Providing and fitting fixing PCB circuit for fixed speed split/cassete type AC as per direction of the Engineer-in-charge.

(I)1.0/1.2/1.5 TR split type high wall AC.

(II)2.0 TR split type high wall AC.

(III)2.5 TR/ 3.0 TR split/cassette type high wall AC.

(IV)4.0TR vertical/cassette type AC.

Providing, fitting and fixing of defective PCB transformer for split type AC system as per direction of the Engineer-in-charge.

Providing, fitting and fixing of defective pump motor for cassette type AC system as per direction of the Engineer-in-charge.

Supply and installation of additional length of copper pipe of for suction and liquid line with insulation and necessary wiring (with three pin electrical plug) to connect the indoor and outdoor unit as per direction of the Engineer-in-charge..

3/4th dia.

3/8th dia.

5/8th dia.

Fabrication of M.S platform for placement of condensing unit by using M.S angel of (50x50x5)mm/(65x65x5)mm size base plate, nuts & bolts/universal bracket (GSS) for ODU of split type AC system including all accessories for on-site installation i/c painting, fitting, fixing grouting by cement mixer as per direction of the Engineer-in-charge.

Dismantling and re-installation of 1.0/1.2/1.5/2.0/2.5/3.0/4.0 TR window, split and cassette type AC system as per direction of the Engineer-in-charge.

Providing, fitting and fixing of G.C.I shed of two parts slanting with ridge and necessary structure by using M/S angle of (30x30x5) mm size M.S flat (18x5) mm size over condensing unit i/c painting and finishing as per direction of the Engineer-in-charge.

Providing hard/ coil PVC pipe of good quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the Engineer-in-charge

Providing, fitting and fixing of defective capicitor for window/split type AC system as per direction of the Engineer-in-charge.

i)25mfd capacitor

ii) 36 mfd capacitor

ii)45mfd capacitor

iii) 50 mfd capacitor

iv) (80-120) mfd capacitor

Providing, fitting and fixing of terminal clip as per direction of the Engineer-in-charge.

Providing fitting and fixing of PVC tape (Black tap) as per direction of the Engineer-in-charge.

Providing, fitting and fixing of thermostat for AC system as per direction of the Engineer-in-charge.

Providing, fitting and fixing of starting relay for window type AC system as per direction of the Engineer-in-charge.

Providing, charging of compressor oil with capillary complete

Supply and installation of additional length of electrical copper wire 4 mm size with casing size 01 (One) inch including other materials to connect outdoor unit with electrical panel as per direction of the Engineer-in-charge.

Providing, fitting and fixing of fan capacitor 2.0/2.5/4.0/5.0 mfd as per direction of the Engineer-in-charge.

Providing, fitting and fixing of fan blade of outdoor unit of window, split, cassette and vertical type AC system as per direction of the Engineer-in-charge.

Providing, fitting and fixing of connector for split type AC system as per direction of the Engineer-in-charge.

Providing, fitting and fixing of remote with battery for window, split, cassette and vertical type AC system as per direction of the Engineer-in-charge.

Providing, fitting and fixing of coil sensor for split type AC system as per direction of the Engineer-in-charge.

Providing, fitting and fixing of room sensor for split type AC system as per direction of the Engineer-in-charge.

Providing, fitting and fixing of display sensor for split type AC system as per direction of the Engineer-in-charge.

Providing, fitting and fixing of nitral tape (Arrow tape) as per direction of the Engineer-in-charge.

Providing, fitting and fixing cooling coil for refrigerator as per direction of the Engineer-in-charge. (With one year warranty)

Providing, fitting and fixing fan motor for double door refrigerator as per direction of the Engineer-in-charge.

Providing, fitting and fixing timer for double door refrigerator as per direction of the Engineer-in-charge.

Providing, fitting and fixing sensor for double door refrigerator as per direction of the Engineer-in-charge. (With one year warranty)

Providing, fitting and fixing heater coil for double door refrigerator as per direction of the Engineer-in-charge.

Providing, fitting and fixing of contactors for split type AC system as per direction of the Engineer-in-charge.

Deployment of one(01) no. technician in one shift (08)hours each and every day thoughout the year to attend immediately as and when required on urgent basis far carring out of work items under AMC.

Cleaning of Filters for indoor unit and coil of out door unit of the AC System as per direction of the Engineer-in-charge.

Providing, fitting and fixing of hermetically sealed compressor for Refrigerator as per direction of the Engineer-in-charge. (With one year warranty)

R.P.ELECTRONICS (BID ID -167877)