Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.9 LAccepted-AOC | L1 | Accepted-AOC lowest admitted | |
| 2 | Rejected-Technical | - | Rejected-Technical 605263.57 |
| Sl No | Description | Qty | Unit | B Anil Kumar L2 | Bijukumar L1 |
|---|---|---|---|---|---|
| 1.00anganwadi maintenance 129(ward 17), 134(ward 16) | |||||
| 1.00 | 10.25.1:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete | 440 | kg | 144.2 ₹63,448 | 140.27 ₹61,718.8 Lowest |
| 1.00 | OD482489/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm metal, filling the joints with M- sand etc. all complete as per the direction of Engineer-in-charge. | 57.9 | sqm | 1,301.45 ₹75,353.96 | 1,265.96 ₹73,299.08 Lowest |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 467.75 | kg | 218.45 ₹1,02,179.77 | 212.49 ₹99,391.99 Lowest |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 107.53 | sqm | 946.95 ₹1,01,830.27 | 921.12 ₹99,052.64 Lowest |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 7 | metre | 635.36 ₹4,447.52 | 618.03 ₹4,326.21 Lowest |
| 1.01 | OD481264/2025-2026:supplying and fixing 150mm pvc split for collecting rain water | 28 | 1 meter | 293.15 ₹8,208.2 | 285.16 ₹7,984.48 Lowest |
| 1.01 | 50.18.9.8.2:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching and refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 4 Kgf/cm2 | 22 | metre | 405.36 ₹8,917.92 | 394.31 ₹8,674.82 Lowest |
| 1.01 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 0.06 | cum | 1,25,031.16 ₹7,501.87 | 1,21,621.22 ₹7,297.27 Lowest |
| 1.01 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | 1.68 | sqm | 3,591.68 ₹6,016.06 | 3,493.72 ₹5,851.98 Lowest |
Tender Value
Refer Docs
EMD Value
₹13,756
Closing Date
18 Mar 2026, 6:00 pmClosed
Assistant Engineer
AE office Mangalapuram
Annual PlanProj no 33525 26Anganavadi maintenance in ward no 1617 in MangalapuramGP
2026_LSGD_846177_1
Annual PlanProj no335 2526Anganavadi maintenance in ward no 16 17 in MangalapuramGP
Open Tender
Civil Works - Buildings
Item Rate
AE office Mangalapuram
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,215
₹13,756
Yes
30 Jul 2026
11 Mar 2026
20 Mar 2026
11 Mar 2026
18 Mar 2026
11 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1anganwadi maintenance 129(ward 17), 134(ward 16) | |||||
| 1.001 | 10.25.1:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete | - | kg | - | - |
| 1.002 | OD482489/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm metal, filling the joints with M- sand etc. all complete as per the direction of Engineer-in-charge. | 1 | sqm | - | - |
| 1.003 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 0.6 | kg | - | - |
| 1.004 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1 | sqm | - | - |
| 1.005 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | - | metre | - | - |
| 1.006 | OD481264/2025-2026:supplying and fixing 150mm pvc split for collecting rain water | - | 1 meter | - | - |
| 1.007 | 50.18.9.8.2:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching and refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 4 Kgf/cm2 | - | metre | - | - |
| 1.008 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | - | cum | - | - |
| 1.009 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | - | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1429426.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
335affi.pdf
Tender Documents • 0.28 MB
335sbd.pdf
Tender Documents • 1.64 MB
41EPAY.pdf
Other Document • 0.24 MB
41INTE.pdf
Other Document • 0.24 MB
335fot.pdf
Tender Documents • 0.34 MB
BOQ_1429426.xls
BOQ • 0.31 MB
335prili.pdf
Tender Documents • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .