Improvement of existing power supply and internal external illumination with LED Lights at FSD Pilibhit under DO Bareilly.

Amount

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required confirming to IS694-2010 or equivalent with upto date amendments. as per direction of engineer-in- charge

3 x 1.5 sq. mm

5 x 1.5 sq. Mm

3 x 2.5 sq. Mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/ recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. (conforming to IS-9537 Part 3 or equivalent with upto date amendments.) 25 mm

Supplying and fixing metal box of sizes 200 mm X 150 mm X 75 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. (conforming to IS 14772 (2000) or equivalent with upto date amendments.)

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections, painting etc. as required.(conforming to IS 3854:1997 or equivalent with upto date amendments.)

5/6 amps switch

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V C curve DP MCB complete with connections, testing and commissioning etc. as required.(conforming to IS 13032, IS 8623 or equivalent with upto date amendments.)

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. (Confoming to relevent BIS/IS standard or equivalent with upto date amendments.)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. (Confoming to relevent BIS/IS standard or equivalent with upto date amendments.)

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. (Confoming to relevent BIS/IS standard or equivalent with upto date amendments.)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (conforming to IS 12943 (1990) or equivalent with upto date amendments.)

2 X 10 sq. mm (19mm)

4 X 10 sq. mm (25mm)

4 X 16 sq. mm (28mm)

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. (conforming to IS-1239 part 1 (2004) or equivalent with upto date amendments.)

Supply , Installation, Testing & Commissioning of LED Street Light fitting with mandatory driver set having die cast aluminium body and lenses suitable for 45 watt and (Confoming to IP 65/IP66 protection and IS -16103-2012 with amnedments,if any or equivalent), as per direction of engineer-in- charge

Supply , Installation, Testing & Commissioning of integral well glass luminaire compressed of dia cast canopy gear box housing and glass driver surge with heat resistance glass of LED well glass fitting 35 to 40 watt, 110 Lm/watt to 125 Lm/watt or Luminous should not be less than 4200 as per direction of engineer in charge (Confoming to IS -16103-2012 with amnedments,if any or equivalent)

Supplying of 18 to 22 watt LED polycarbonate batten fixture with 100 lumens/watt(conforming to IS-16103 part 2 (2012) with upto date amendements or equivalent)as per direction of engineer-in- charge

S/I/T/C of loop in loop out box made of PVC sheet 200 X 150 X 100 mm/suitable size having suitable size 2 nos. terminals and 01 no. SP MCB 5/6A detachable gland plate, interconnection etc. as required (Confoming to relevent BIS/IS standard or equivalent with upto date amendments.)

Supply of PVC insulated PVC sheathed cable of 1.1KV grade armoured Underground aluminum conductor cable as reqd confirming to IS –7098 part I with up to date amendments) of the following size.

2 X 10 Sqmm

4X10 sqmm

4X16 sqmm

Supplying and fixing 20 A, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (Conforming to relevant BIS/IS standard or equivalent with upto date amendments)

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (Conforming to relevant BIS/IS standard or equivalent with upto date amendments)

12 Module

8 Module

6 Module

4 Module

3 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Conforming to relevant BIS/IS standard or equivalent with upto date amendments)

5/6 amps switch

15/16 amps switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Conforming to relevant BIS/IS standard or equivalent with upto date amendments) Group C

Supply of ceiling fan with 1200 mm sweep (Conforming to relevant BIS/IS standard or equivalent with upto date amendments)

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc.as required. (Conforming to relevant BIS/IS standard or equivalent with upto date amendments)

Credit for dismantelled/damaged items:-

Aluminium scrap i.e., ACSR etc.

Iron Scrap i.e., Poles etc

NEW VICKY ENTERPRISES

M/S POOJA ELECTRICALS