Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.9 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹16.3 L+₹39,935 (2.51%)Rejected-Finance INDEX NO B 48 HQ CE SWC JAIPUR A 202 RATHRAM PANORAMA GALA GIMAKHANA ROAD NEAR AMMANJARI BUNGLOWS SOUTH BOPAL AHMEDABAD 380058 | AHMEDABAD | AHMEDABAD | GUJARAT | 380058 | L2 | Rejected-Finance Rejected due to bidder not L1 | |
| 3 | L3₹17.2 L+₹1.3 L (8.21%)Rejected-Finance | L3 | Rejected-Finance Rejected due to bidder not L1 |
Tender Value
₹16.5 L
EMD Value
₹33,000
Closing Date
5 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh K A Vardhan, IDSE
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
PROVN OF CONF HALL WAITING ROOM WITH ATT TOILET AT NCC AT AHMEDABAD
2022_MES_538705_1
8268/E8
Open Tender
Civil Works
Works
180 days
GE (Army) Ahmedabad
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (Army) Ahmedabad
₹33,000
Yes
27 Sept 2022
16 Jul 2022
8 Aug 2022
16 Jul 2022
5 Aug 2022
22 Jul 2022
16 Jul 2022 - 22 Jul 2022
Amount
Surface excavation n.exc 30 cm deep and averaging 18.5 cm deep and getting out in soft/loose soil complete.
Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in Hard/dense soil complete.
Returning, filling in trenches including spreading leveling, watering well, ramming in layers n.exc 25 cm in soft / loose soil complete.
M&L for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below & around cable complete.
Removing excavated material n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete.
M&L Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete.
M&L Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete.
M&L for providing precast cement concrete (1:2:4) type B-1 (20mm graded aggregate) as in manhole covers set in cement mortar (1:4) complete.
M&L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete .
M&L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate as in slabs, beams complete .
M&L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts etc complete .
Supplying & applying Integral waterproofing compound complete.
M&L for brick work with old size sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius complete.
M&L Brickwork with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in In CM (1:4) complete.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth in brick wall complete.
M&L well burnt bricks sub class 'B' as in protection of cable laid dry, flat abutting each other width wise complete
M&L 18-20 mm thk Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.
Use & waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, surface finished fair complete.
Use & waste for form work for rough finished surfaces of concrete measured flat for Roof Slab complete.
Use & waste for formwork to sides and soffits of floor or roof beams, beam haunch girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams, etc for rough finished surfaces of concrete complete.
Use & waste for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete complete.
Use & waste for formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished complete.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete.
S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification complete.
S&F brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long between flanges complete.
S&F Aluminum body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete.
M&L TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete.
M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete.
S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; flats fixed with angle cleats etc conforming to Fe.410-W (Gde-E-250, Quality-A) complete.
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete.
M&L providing PCC 1:3:6, type C2 (using 40 mm graded aggregate), 75 mm thick, finishing cement concrete surfaces even and fair without using extra cement, as in plinth protection, path etc including necessary form work and provision of bituminous joints mixed with bitumen and sand at intervals not exc 3.00mtr complete.
M&L cement concrete type D-2, 1:4:8 (40 mm graded agg.) 75 mm thick as sub base in foundation complete.
S&F coloured plain/printed glazed tiles of size 300 x 450 x 7 mm, on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 complete.
S&F Non - skid Ceramic tiles 7 to 8 mm thick square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick rendering in CM 1:6 complete.
M&L for Vitrified Ceramic tiles light shade 10 mm, (square or rectangular) area of each tile n. exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed CM 1:6 complete.
M&L for Vitrified Ceramic tiles light shade 10 mm, (square or rectangular) area of each tile n. exc 0.36 Sqm in vertical surfaces such as skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:4 complete
M&L for 15mm thick rendering in two layer on brick work or concrete External fair faces of surfaces of wall, 5mm thick plaster in CM:1:4 mixed with WPC @ 3% by weight of cement over 10mm thick plaster in CM 1:6 & finished even and smooth without using extra cement complete. (Note : WPC shall be measured & paid separately)
M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with in CM 1:6 is to be finished even & smooth (without using extra cement) complete.
M&L for preparation of new surface of walls with two coats of Premium Acrylic Smooth exterior paint with Silicone additives of required shade primer complete .
M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete.
M&L for preparation of new plastered surfaces on walls and applying two coats of oil oil bound distemper with Priming plastered and other surfaces with alkali resistant priming paint over 1.5mm average thk wall care putty complete
S&F 4mm thick coloured textured designer ceiling board of size 595 X 595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/Sqm, main runner shall be 0.3 mm thick of section 24 mm X 33 mm cross runner 0.3 mm thickof section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyster coated in off white/white in colour complete.
S&F powder coated anodised Aluminium alloy 1.5mm thk sections sliding windows with frames and 3 track sliding shutters duly fitted including glazing / aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle, neoprene beading, two shutters tinted glass panes 4.8 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm, aluminium alloy handles/lock etc.and finishing the surface to match the exisiting surface after fixing of window complete.
S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete.
M&L aluminium decorative grill medium grade of mesh size 75mm x 75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37 x 19 x 2mm complete.
S&F factory made 32mm thick flush door shutter solid core construction with block board core and laminated over plywood face decorated type on both side complete .
S&F Stainless steel mortice lock 6 lever for flush door of premium quality complete.
S&F Stainless steel tower bolt 150 mm for flush door of premium quality complete.
S&F Stainless steel handle for door 150 mm of premium quality complete.
S&F Stainless steel butt hinges medium weight 100mm long complete.
S&F stainless steel sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete.
S&F 25 mm dia stainless steel fancy type curtain rod with brackets of stainless ends etc complete.
S&F raised type PVC wall panelling with decorative finish / wood finish having thick ness minimum 5 mm thick premium quality over supporting standard grid to rest panelling complete.
S&F fancy type Bib taps 15mm bore brass CP with wall flange, screwed down, screwed for iron pipe or for brass ferrule and fixed & similar to cat no 7806 of make Prayag complete.
S&F 2 way bib cock with flange brass CP fixed in 15mm bore pipe & similar to cat no 6512 of make Prayag complete.
S&F for brass CP wash basin mixer for mixing hot & cold water screwed down for iron pipe & fixed 15mm bore of pipe & similar to cat no 7750 of make Prayag complete.
S&F Brass CP angular stop cock with wall flange & similar to cat no PR 544 of make Prayag complete.
M&L for galvanized iron water tubing medium grade ISI marked with all fittings laid in trenches for the 20 mm bore complete.
S&F steel tubes light grade galvanised with all fittings fixed to walls / poles etc of 40 mm bore complete.
S&F steel tubes light grade galvanised with all fittings fixed to floors / road crossing etc of 40 mm bore complete.
S&F 20 mm medium grade GI tubing with removal socket joint, togheter with all tube fittings (such as bents, elbows, tees, short pieces, connections , caps, plugs and unions etc and fixed with clips wall hooks, wooden plug etc fixed to walls, in floors, ceiling and making good complete.
S&F 15 mm medium grade GI tubing with removal socket joint, togheter with all tube fittings (such as bents, elbows, tees, short pieces, connections, caps, plugs and unions etc and fixed with clips wall hooks, wooden plug etc fixed to walls, in floors, ceiling and making good complete.
Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete.
S&F 750 ltrs rotational moulded polyethenine water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR complete.
M&L for stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore complete.
M&L for gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50 mm bore complete.
S&F PVC connections 600 mm long, 15 mm size with PTMT nuts complete.
S&F PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete.
S&F PVC (SWR) pipes 110 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete.
S&F PVC (SWR) bends any radius, 75 mm bore complete.
S&F PVC (SWR) bends any radius, 110 mm bore complete.
S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete.
S&F PVC (SWR) vent cowl, 110 mm dia complete.
S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete.
M&L Cement concrete type 1:4:8 type D2 concrete bed to drain pipe of dia 150 mm including packing under and hounching against the sides of pipes after they are laid and tested complete.
M&L Reinforced concrete pipes, class NP2, 150mm dia laid and jointed with collars complete.
Cutting into existing manholes of 150mm internal dia of pipes for connecting new drains, making good to pipe and rendering cutting out existing benching and forming branch channel in PCC (1:2:4) type B-1, smooth finished complete.
S&F vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete .
S&F vitreous china bowl urinals flat back size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement including waste pipe complete.
S&F 10 litres PVC valveless, syphonic action type flushing cistern, with inlet ball valve, float and handleincloding brackets and PVC connections 15mm size with PTMT nuts of length 600 mm complete.
S&F PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.
S&F vitreous china counter TOP wash basin, white, of size 425 X 425 X 145 mm including taps, brass coupling 32mm, bottle trap of 32mm size with 300mm long complete.
S&F soap dish of 1mm thick stainless steel box type fixed with screws of size 150mmx150mmx100mm complete.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete.
S&F corner glass shelf 300mm brass brackets & similar to cat no BEA 44 of make Prayag complete.
S&F toilet paper holder brass CP glossy finish & similar to code no BA 08 of make Prayag complete.
M&L for machine pressed coloured pre-cast concrete interlocking rubber moulded paver block any shape and size conforming to IS 15658-2006 of 60mm thickness including M-35 grade with grey cement and pigment and Sand filling 50mm thick under floor/over floor or in foundations including well ramming complete.
S&F precast PCC kerbs stone machine pressed factory made of size 300 x 100 x 350 mm (L-300mm T-100mm H-350 mm) in PCC 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate maximum depration from a straight edge incl all necessary earth work complete.
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core complete.
M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R Y B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting modular switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for One light point controlled by one switch complete
All as per Item No 92 above but for One fan point controlled by one switch.
All as per Item No 92 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.
All as per Item No 92 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.
All as per Item No 92 above but for Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm for one 16 amp socket outlet controlled by one switch on independent board complete.
S&F modular switch one way 6 amp 1 module
S&F modular switch one way 16 amp 1 module
S&F modular socket 6 amp 2/3 pin combined 2 module
S&F modular socket 6/16 - 2/3 pin combined 2 module
S&F modular hum free electronic step fan regulator, 100 watt 2 module
S&F sheet metal enclosure single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete.
S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete.
S&F Ceiling rose 6 amp, 3 plates polycarbonate body complete
S&F Air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louver shutter complete.
S&F ceiling fans with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete.
M&L submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes 2x4 sqmm + 1x4 sqmm earth continuity conductor complete.
M&L submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes 2x6 sqmm + 1x6 sqmm earth continuity conductor complete.
S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete.
S&F energy efficient recessed mounted LED luminaries suitable for for 2' x 2' grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white color PVC insulated & sheathed three core flexible multistranded copper conductor cable, complete.
S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable & similar to Philips cat ref no. WT202W LED6S CW PSU S1 PC complete.
S&F MCBs Single pole 6 to 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete
S&F MCBs Double pole 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete
DMA PROJECTS
TECH SERVE SOLUTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .