Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
Closing Date
15 Oct 2026, 3:00 pm4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
CGM (Production and Project Co-Ordination)
PMD Office, TNPL Unit I, Kagithapuram.
Replacement of false ceiling in Clo2 DCS room at TNPL Unit I
2026_TNPL_711518_1
TNPL/PMD/CIV/UNIT I/262713004339
Open Tender
Civil Works
Item Rate
10 days
TNPL Unit I, Kagithapuram, Karur district
Not Applicable
1 document required · 1 mandatory
₹0
Exempted
7 Oct 2026
7 Oct 2026
16 Oct 2026
7 Oct 2026
15 Oct 2026
7 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1BOQ | |||||
| 1.01 | I. MATERIAL CEILING TILES SHALL BE OF MADE OF MINERAL FIBRE OF DIMENSION 595X595MM WITH 16 MM THICKNESS HUMIDITY RESISTANCE 99% THERMAL CONDUCTIVITY K = 0.052-0.057 W/MK COLOUR WHITE, FIRE PERFORMANCE UK CLASS 0/CLASS 1 (BS 476 PT -6&7) SUITABLE FOR GREEN BUILDING APPLICATION (GRIHA CRITERIA 17 & 29 SWAGRIHA 12) WITH RECYCLED CONTENT NOT LESS THAN 30 % AND LIGHT REFLECTANCE NOT LESS THAN 85%. NRC OF 0.55 TO 0.6. THE TILE AND GRID SHOULD CARRY A LIMITED WARRANTY OF ONE YEAR AGAINST SAG.
II. FRAME THE FRAME WORK SHALL CONSIST OF G.I. ' T ' SECTIONS FOR MAIN RUNNERS 15X38X3000MM LENGTH, CROSS RUNNERS OF 15X32X1200MM & 15X32X600MM SIZE, 0.33 MM THICKNESS AS SPECIFIED IN THE ITEM WITH GALVANIZATION OF 120 GSM (MINIMUM) AND PERIMETER WALL ANGLE OF 0.40MM (MINIMUM) THICK GAUGE HAVING EQUAL FLANGES OF SIZE 24X24MM MADE FROM PRECOATED G.I. COIL LENGTH OF 3.0M FIXED TO THE WALL WITH THE HELP OF PLASTIC RAWL PLUGS AT 450MM CENTRE TO CENTRE WITH 50MM LONG DRY WALL SS SCREWS. THE FRAME WORK SHALL BE EXECUTED IN A MANNER SO AS TO FORM A GRID OF 600X600MM AS SPECIFIED IN THE ITEM.
III. FIXING OF CEILING TILES
THE FRAME WORK SHALL BE SUSPENDED FROM CEILING BY L SHAPE LEVEL ADJUSTER HANGERS MADE OF G.I. OF SIZE 85X25X25X2MM HAVING DIE CUT SLIT FOR SLIDING INTO MAIN T SECTION, ALSO HAVING PRECUT HOLE SO THAT 6MM FULLY THREADED MS ROD LENGTH UPTO 1000MM GOES THROUGH IT AND PIERCES INTO M6 DASH FASTENERS (GALVANISING OF 80 GSM MINIMUM) OF 6MM DIA 50MM LONG, FIXED TO THE SLAB AND THEN TIGHTENED WITH CHECK NUTS, SUBSEQUENTLY THE BOTTOM OF 6 MM ROD WILL BE TIGHTENED WITH CHECK NUTS FOR ADJUSTING THE LINE & LEVEL. THE TILE SHALL BE LAID ON 15X32MM WIDE T SECTION FLANGES COLOUR WHITE HAVING ROTARY STITCHING ON ALL T SECTIONS I.E. THE MAIN RUNNER, 1200 MM & 600.
MEASUREMENTS
LENGTH AND BREADTH OF SUPERFICIAL AREA OF THE FINISHED WORK SHALL BE MEASURED CORRECTTO A CENTIMETRE. AREA SHALL BE CALCULATED IN SQUARE METER CORRECT TO TWO PLACES OFDECIMAL. NO EXTRA PAYMENT TO BE MADE EITHER FOR ANY EXTRA MATERIAL OR LABOUR INVOLVED INFORMING OPENINGS.
THE RATE IS INCLUSIVE OF MATERIAL, LABOUR, AND SCAFFOLDING CHARGES ETC COMPLETE. | 120 | SQM | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.73 MB
BidDocument_262713004339.pdf
Tender Documents • 23.74 MB
BOQ_854821.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .