A R and M O LWSS Jawalamukhi Town

Excavation in foundation and trenches etc. (in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge in all leads and lifts.Pick and Jump work

Providing and laying cement concrete 1:3:6 (1Cement:3sand:6 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work foundation and plinth in all leads and lifts

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain.

Foundation Footing Bases of Coloumn, Pillar etc

Sides & soffits of beams cantilevers, girders & lintels,, haunching, cantilevers, bressumers 1.00 mts. In depth in all heights from floor.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness.

Providing and laying cement concrete work 1:1.5:3(1cement: 1.5sand: 3 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-

Foundation, footing, bases of columns & the like & mass concrete etc.

Suspended floors, roofs, landings and shelves and their supports, balconies, beams, griders bressumers and cantilevers upto all floor level.

Columns,pillars, posts & struts upto floor two level.

Lintels, beams, griders bressumers and cantilevers upto all floor level.

Providing Tor steel reinforcement for RCC work including bending, binding & placing in position complete upto floor two level

Ist class brick work using Common burnt clay building brick with fine surface and even edges in common burnt clay building bricks, laid in supper structure above plinth upto floor two level in cement mortar 1:4(1cement:4sand) including carriage of materials in all leads & lifts

Providing wood work of in frames of doors, windows,clerestory, windows and other frames wrought, framed and fixed in position complete including carriage of materials in all leads & lifts. (Ist class indian teak wood, minimum weight 700 to 800 kg/cum)

Providing and fixing panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows i/c bright finished/black enamelled iron butt hings with necessary screws 1st class teak wood 40mm thick including carriage of material in all leads & lifts.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G, with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws 1st class teak wood 40mm thick including carriage of material in all leads & lifts.ist class teak wood

20mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(Icement:6sand) within all leads and lifts.

6 mm cement plaster to ceiling in CM 1:4 (1Cement :4 Sand)

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement: 3sand:6 graded stone aggregate 20mm nominal size) including finishing of the top surface of concrete smooth in all leads and lifts.

Providing under layers for plinth protection of 75 mm thick (unconsolidated) bed dry brick/stone aggregated 40 mm nominal size will rammed 7 consolidated & grouted with fine sand including preparation of gruond.

Applying Birla white wall care putty minimum three coats over plastered surfaces after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final smooth finish to the surface complete ready for final coat of wall emulsion in all respect including carriage of material in all leads & lifts (16103000).

Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/ masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete complete in all respect including carriage of material in all leads & lifts (16101000).

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equavallent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete in all respect including carriage of material in all leads & lifts (16104000).

Wall painting (two coats) with Royal emulsion asian/Dulex makepaint of approved brand and manufacture for interior grade on undecorated interior plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth, excluding coats of putty as required for making the surface even/smooth complete in all respect including carriage of material in all leads & lifts (16105000).

Providing and fixing M.S.fan clamp(Type-I of 16mm dial M.S. Bar bent to shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete. In all Rooms on Ground & First Floor

Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dial meters bolts and nuts and wooden plug and embeding in cement mortar block 30x10x15cm (1:3:6(1cement:3sand: 6 graded stone aggregate 20mm nominal size.

Providing and faxing bright finished stainless steelsliding door-bolts with nuts and screws etc. complete in all respect including carriage of material in all leads & lifts.

Providing fixing bright finished stainless steel tower bolts (barrel type) with screws etc. complete, in all respect including carriageof material in all leads & lifts.

Providing and fixing bright finished stainless steel handles for doors with screws etc. complete. in all respect including carriage of material in all leads & lifts (1211300000).

Stone/Boulder filling under floors/behind retaining walls.

Providing and laying cement concrete work 1:2:4 (1Cement: 2 Sand: 4 Graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- Foundation & Plinth

Providing and fixing 9mm thick polished/satin/matt/ antiskid water proof stain and impect resistent heavy duty vetrified tiles degital/ full body of Simpolo/KaJARIA/ Nitco or equivalant 60X60cm OR60x120cm OR 80X120,20x120cms manufactured of approved shade and colour inflooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement: 3 sand) Jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads & lifts. (13680000) (fixed with 5mm spacer, filled with epoxy or flush joints)

Providing steel round or square bars at required size in wooden frames & windows completed all respect including carriage of material in all leads and lifts.

Filling in plinth with sand under floors including watering ramming consolidating and dressing complete under flooring complete in all respect including carriage of material in all leads & lifts.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement: 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement: 5 Sand: 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1) Cement: 2 Sand: 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads & lifts (19060000).

Random Rubble stone masonary with approved quality of Hard stone in foundation and plinth in CM 1:6 (1 cement: 6 sand) complete in all respect and in all leads & lifts.

Painting to door and windows with two coats of syntheic enamel paint over a coat of pink primer complete in all respect and in all leads & Ifts