PROJECT NO.342/24,AURVEDA HOSPITAL COMPLETION WORKS,IN VANDANMEDU GP

Amount

COMPLETION

OD343624/2023-2024:Supplying and fixing partition walls of Anodised Aluminium fabrication works with Anodised aluminium sections (ISO Certified) for outer frames and bottum paneling with 6 mm thick nowapan sheet and top paneling with 4 mm thick float glass including necessary clips,rubber beeding, cleet,screws etc. complete

OD343625/2023-2024:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

OD343631/2023-2024:Providing and fixing 200 mm wide square uPVC rain water gutter including all necessary fittings and making all necessary connnections complete as per the direction of engineer in charge at site

18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

OD343643/2023-2024:supplying precast factory moulded RCC DOOR FRAME 80x190 cm or nearest size and fixing i position in lineand level directed by the engineer in charge including fixing in position MS clamp 3nos with minium length of 25cm on each vertical side of the frame with necessary screws and fixing the clamp with concrete in wall using 1:2:4 concrete mix including all cost of conveyance ,material cos of conveyance ,materialcost ,labour charges curing charges etc complete (concrete for fixing clampshall be paid separtely)

OD343639/2023-2024:supplying precast factory molded RCC window frame 100x140cm or nearest size and fixing i position in line and level directed by the engineer in charge including fixing in position MS clamp 3 nos with minim length of 25 cm on each vertical side of the frame with necessary screws and fixing the clamp with concrete in wall using 1:2:4 concrete mix including all cost of conveyance ,material cos of conveyance ,material cost ,labor charges curing charges etc complete (concrete for fixing clamp shall be paid separately

OD343640/2023-2024:supplying precast factory moulded RCC ventilator frame of size 80x40 cm or nearest size and fixing in position in line and level directed by

50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood

50.9.6.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD343647/2023-2024:Supplying and fixing in place granite name board of slab area less than 1.5 sqm including engraving and painting 650+ letters etc complete as per direction of Engineer incharge at site

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

ANISH SEBASTIAN

Bidder Name

ANISH SEBASTIAN

AFSAL K M