SPECIAL REPAIRS FOR TOP OVERHAULING AND OTHER CONNECTED WORKS OF 3 X 320 KVA DG SETS AT INS DEGA AND PROVN OF PERIMETER SECURITY LIGHTS AT OLD SITE OF MATERIAL ORGANISATION UNDER AGE E/M NO-II OF GE (U-I) (V)

Amount

Supply, erection, testing and commissioning of Hot dip galvanised octagonal pole of 7.5 m height, top dia 70 mm bottom dia 135 mm, Base plate 225mm x 225 mm x 16 mm, foundation bolt M20 x 700 - 04 Nos complete with single arm GI bracket of suitable size and including built in connecter control box with locking arrangement along with with 5/6 Amps MCB - 01 No, 50 Amps rated 3 pole connector- 01 Nos, neutral link mounted and Din rail suitable size for mounting MCB/Connector etc complete in the box all as directed including dismantling old one complete all as specified and directed. (Make: Jindal Steel / National Tubing Co / Bombay Tubes & Store / Calcutta Poles & Tubes / Bajaj / Crompton Greaves / Philips ).

NOTE :- The rate quoted shall include the following : (i) The required RCC foundation shall be designed as per manufacturers instructions considering safe bearing capacity of soil as 10 t/m2 which shall be got approved by GE before execution of work.. (ii) Necessary Earth work, RCC M-20 shallow foundation, reinforcement steel as per design, foundation bolts manufactured with special steel along with nuts, washers, anchor plates & templates complete set etc.(iii) Erection and commissioning of the octagonal pole with the help of suitable T & P.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed. Make : Havells / Philips / GE / Wipro.

Supplying, laying, testing and commissioning LT XLPE insulated , armoured heavy duty electric cable of following sizes, 1100 volts grade with stranded aluminium conductor laid in trenches / passing through pipe / duct/ road crossing /fixed on poles / walls Complete all as specified and directed. MAKE: Havells / Gloster / KEI Industries Ltd / Polycab / Asian Cables / Finolex [Note: The rate quoted shall inclusive of termination at ends with suitable aluminium lugs where required]

25 sqmm 4 Core

70 sqmm 3.5 Core

Supply & fixing of timelite distribution boards (street light DBs) 65 A Triple pole with MCB 63 Amp TPN with 230 V digital 24 Hr timmer switch complete all as specified and directed. Make: Indo Asian / HPL / Havells

Excavation in trenches n.exc 1.5 m wide and not exc 1.5 m depth and getting out in soft / loose soil complete all as specified and directed.

Returning and filling in of excavated material any type including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.

Removal of surplus excavated material of any type to a distance not exceeding 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

M&L for sand cushioning / sand covering for underground cable protection complete all as specified. Note: Punned thickness shall only be measured and paid.

Supply and laying sub class 'B' bricks of old size (approved size locally available) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge

M&L for GI pipe light grade 50 mm dia laid along road crossings / plinth protection with suitable fittings for cable protection or fixed to the pole/ Wall complete all as specified and directed by Engineer-in-Charge . Make : Surya Roshni Ltd / Tata / Jindal steel / Prakash

Cutting trench through road/ wall to a width of 20cm and depth of 30cm for inserting GI protection pipe for drawing cable and filling back the trench with PCC 1:3:6 type C1 complete all as directed. ( NOTE : GI pipe will be measured and paid separately )

M & L Earthing for poles and other machinery/eqpt using GI strip as earth lead and MS galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate is not less than 1.5 mtr below normal ground level connected to galvanized iron strips 32x6 mm with GI pipe, nuts, bolts and washers complete upto and including test point made out of 40x3 mm GI flat, PCC pit of required size in PCC 1:2:4 type B1 and RCC cover with frame, charcoal, common salt 15cm at round the earth plate watering pipe 20mm med grade/galvanized and 40mm dia GI pipe light grade for GI strip protected steel with funnel complete all as specified and directed as shown in electrical plate No 3 of SSR Part-I 2009.

S&F PVC insulated 3 core 1.5 sqmm stranded copper conductor cable for connecting junction box to street light fitting, testing and commissioning all as directed. MAKE : Polycab /Finolex / Havell

Supply, fabricate, install, testing and commissioning of LT feeder panel board of size 0.9 mtr length x 1 mtr height x 0.60 mtr depth out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on suitable size foundation with 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement alongwith metering arrangments (Multifunctioning meter) complete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including horizantal busbar of aluminium strip 40 x 10 mm for three phase 4 wire including the following accessories and fitted in : - (a) Incomming : MCCB high breaking capacity 4 pole 415 volt 25 KA breaking capacity adjustable thermal release range 100 Amps – 01 No

(b) Outgoing : (i) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 63 amp – 03 Nos (ii) 3 phase Multifunctional Digital Meter consisting of ammeter, voltmeter, frequency meter, PF alongwith suitable CTs Complete control panel wiring with 1.5 sqmm stranded copper conductor alongwith one set of indicator lamp for RYB for incoming and outgoing feeders (iii) Lock pedestal – 01. Makes : (i) MCCB/MCB : Legrand / L & T / Siemens / ABB / C & S / Schneider / GE (ii) Volt Meter/Ammeter : Havells / HPL / L & T / AE / Schneider / BCH

M&L for top overhauling of Diesel engine by dismantling the sub-assemblies such as fuel pump, fuel injection, Governor, turbo- charger, radiator, oil-cooler, engine heads, rocker arms, self starter, dynamo-engine wiring, terminal contacts and safety controls etc including replacement of spare parts as required and re-assembling the sub-assemblies after carrying out necessary repairs including de-scaling of raditor by dismantling the upper and lower tank and clenaing the core pipes with cleaning chemicals (radi wash), components and arrest the leaking core by brazing/ dummy with lead including cleaning of upper and lower tanks and replacing the upper and lower gaskets and required nuts, bolts, refixing the same including testing and painting with a coat of approved colour complete and testing and commissioning after carrying out overhauling for following DG sets complete all as specified and directed by Engineer -in-Charge. .

Notes: (a) Overhauling of DG set shall be carried out by OEM / Authorized service dealer. Manufacturers authorisation cetifcate shall be submitted in case of service is done by authorized service dealer of OEM. (b) The rate quoted shall inclusive of repair & Calibration of turbo super charger, PT fuel pump & Injectors as per calibration procedure and norms all as per manufacturers guide lines. (c) Spare parts required for top over hauling shall be measured and paid separately as supply only as mentioned here in after , however the rate quoted shall inclusive for replacement of same. If any spare parts otherthan mentioned here in after are necessary to complete Overhauling shall be included in quoted rate.

DG set of capacity 320 KVA , Model No- TBD2V12, Engine No-.13151250238 of M/S Cotton Greaves

DG set of capacity 320 KVA , Model No-TBD2V12, Engine No-.51250255 for M/S Cotton Greaves

DG set of capacity 320 KVA , Model No TBD2V12, Engine No-332312903017 for M/S Cotton Greaves

Supply only following Spare parts of DG set :

Set of Flexible Pipes, CAT No- 123200194307

Set of Sealing Rings, CAT No-123200193438

Set of Hoses, CAT No-123200192858

Set of Hoseclips, CAT No-123200193898

W.T. Guage, CAT No-105685000621

LOT Guage, CAT No-105681021034

Pressure Guage, CAT No-105612412501

RPM Meter, CAT No-105652020108

RPM Cable, CAT No-103010151501

V-Belt A-44, CAT No-103460211118

V-Belt A-66, CAT No-103460211676

Lube Oil Filter, CAT No-605411880008

Fuel Filter, CAT No-001200240911

Fuel Filter, CAT No-001200240912

Fuel Pre Filter 5 It, CAT No-105413100062

0 Ring, CAT No-106900000033

A.V. Mounting, CAT No-606500100006

A.V. Mounting, CAT No-606500100210

AVR, CAT No-700000790112

Stud, CAT No-602007000845

Nut, CAT No-602100540080

Washer, CAT No-602160100080

Lube Oil Cooler, CAT No-123209400227

Injector Overflow Pipe, CAT No-123209390985

Cooling Water Pipe, CAT No-623209120165

Cooling Water Pipe, CAT No-623209120265

Thermostat, CAT No-605250100010

Starter Gear Ring, CAT No-623203750024

Pipe Cooler to engine, CAT No-123209121005

Pipe Pump to Cooler, CAT No-123209121495

Pipe, CAT No-123209151615

Hand Priming Pump, CAT No-105200100005

Head Gasket, CAT No-623208550064Cyl

Set of Gasket CAT No-123200193557

Con. Rod Bearing CAT No-623204306007

Set of 0 Ring CAT No-123200190208

Stem Seal, CAT No-604962000002

Ring, CAT No-106900000033

A.V. Mounting, CAT No-P21190850024

Magnetic Pickup, CAT No-100007760793

Digital RPM Meter, CAT No-105652090146

Electrical Control Unit, CAT No-106902090058

Cyl. Head Bolt, CAT No-602000131615

Con. Rod Bolt, CAT No-123203530014

Swivel Joint, CAT No-602700550081

Swivel Joint, CAT No-602700550082

Cylinder Liner, CAT No 123201320014

Piston, CAT No-623201600106

Piston Ring Set, CAT No-623200197227

Push Rod, CAT No-623203210034

Inj Sleeve, CAT No-623203300094

Ring, CAT No-623203400064

M/S CHANDRA ENGINEERS AND CONTRACTORS

BHARGAVI ENGINEERING CONSTRUCTIONS

VENKATESWARA ENGINEERS AND CONTRACTORS